Skip to content

phy: apple: atc-t6050: J716c deep sleep - #2128

Merged
DjDeveloperr merged 2 commits into
integration/aurorafrom
j716c/phy-sleep
Nov 17, 2026
Merged

DjDeveloperr merged 2 commits into
integration/aurorafrom
j716c/phy-sleep

Conversation

@erikwb

@erikwb erikwb commented Nov 17, 2026 •

Copy link
Copy Markdown
Contributor

What this does

The T6050 combo PHY's deep-sleep rules apply on the J716c too: a port's always-on domain is kept
while the port is in use (and the sleep told so), a stop releases a wrapper domain still held, a
safe state with a domain still held is stopped again, and the CIO USB step keeps the tunnelled USB
host's pipe over a USB4 router's sleep in place.

Tested

  • phy: apple: atc-t6050: J716c deep sleep #2128 (j716c/phy-sleep) builds on its own base (Image.gz, modules and dtbs, arm64, LLVM).
  • All 17 branches merged on integration/aurora were built as one kernel and run on a J716c (16" M5 Max): one suspend-to-RAM with a USB4 dock attached, about 30 s asleep, woken by the RTC alarm (wake source 76). After the wake all 18 CPUs were online, the dock's router came back in place with its Ethernet up, and the SEP answered RNG reads. The sleep's log showed "secondary clusters down first: cores 6+6, cluster 1 0x1a in 353 us, cluster 2 0x1c01a in 448 us". The PMP was not running in that build.

Dependencies

Branch #2128 (j716c/phy-sleep). Based on integration/aurora; no dependencies at build time. At run time the J716c deep sleep needs #2119 (j716c/sleep-j716c-profile) and #2123 (j716c/dts-deep-sleep).

Part of the J716c deep sleep set: #2118 (j716c/spin-table-release-cpus), #2119 (j716c/sleep-j716c-profile), #2120 (j716c/sleep-wake-source-names), #2121 (j716c/sleep-sep-auto-wake), #2122 (j716c/sep-t6050-profile), #2123 (j716c/dts-deep-sleep), #2124 (j716c/drm-apple-sleep), #2125 (j716c/dart-sleep), #2126 (j716c/thunderbolt-sleep), #2127 (j716c/usb-sleep), #2128 (j716c/phy-sleep), #2129 (j716c/pcie-sleep), #2130 (j716c/aic-sleep), #2131 (j716c/asahi-sleep), #2132 (j716c/spmi-sleep), #2133 (j716c/macsmc-sleep), #2134 (j716c/nvme-sleep).

🤖 Generated with Claude Code

For a deep sleep the combo PHY keeps a port's always-on domain while the
port is in use, and tells the sleep so, which then leaves that port's
always-on USB word on at its last steps; a stop releases a wrapper domain
still held, and a safe state with a domain still held is stopped again.
These were set up on the J714s only. On the J716c the sleep would lower the
always-on word of a port in use, under the dock that sleeps in place.

The J716c's ports are the same T6050 ATC ports: apply them there too.

Developed with Claude Code.
Signed-off-by: Erik Bourget <erik@ebourget.net>
…n place

The J716c's right-port USB4 router sleeps in place as the J714s's does.
Apply the J714s's CIO USB step, which keeps the tunnelled USB host's
pipe over such a sleep, to the J716c too.

Developed with Claude Code.

Signed-off-by: Erik Bourget <erik@ebourget.net>
@DjDeveloperr
DjDeveloperr marked this pull request as ready for review November 17, 2026 19:13
@DjDeveloperr
DjDeveloperr merged commit 4c4beb2 into integration/aurora Nov 17, 2026
1 check passed
@RyanTheTide
RyanTheTide deleted the j716c/phy-sleep branch November 17, 2026 23:53
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

2 participants