I develop embedded software for microcontrollers, from low-level firmware to system-level verification with real measurement hardware. Before that I was an application engineer for analog ICs and PCB design, so I start with the datasheet and the physical layer.
In my spare time I build software-defined radios and take digital radio protocols apart.
|
SDR transceiver for TETRA base stations, based on the Semtech SX1255 and the NXP FRDM-MCXN947. The sample path runs on a dedicated microcontroller: timestamped I/Q samples are counted in hardware and streamed to any Linux or macOS host over HS USB or Ethernet. The firmware switches the PA off independently of the host. Firmware, host software and the redesigned RF shield by me. Original board concept by Z32IT (Phenix-1255-HW). |
| Real-time signal processing, from raw IQ samples to decoded data. | TETRA, DMR and M17: protocol structure and metadata analysis. |
| Bare-metal C on ARM Cortex-M, VHDL on FPGAs, test setups for embedded targets. | Real-time firmware with Zephyr on ARM Cortex-M. |
| Design and measurement of filters, amplifiers and antennas. | Multi-layer boards in KiCad and Altium Designer. |
| Languages |
|
| Embedded & hardware |
|
| RF & DSP |
|
| Radio protocols |
|
| Tooling |
|
