Repository navigation
planner-ux: merge develop (the web product) - #3662
Merged
Merged
Conversation
…obil Route sources: SchweizMobil in the registry, and a reader of route source files
…probe read one value Co-Authored-By: Claude Opus <noreply@anthropic.com>
routing: no French route mark, decided per route; regions over several countries
- The close button of the card moves the focus to the row with no scroll: on a phone the list is above the map, and the page jumped up to the list. - The notice of TrailView stands under the zoom buttons, as wide as they and the control together. So the room of the credits is the width of the control alone, and the open credits are not a narrow column on a phone. Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A trail is a record with no `trail` that has two or more official stages, or takes more than 12 hours of moving time. The routing step writes one far file for each zoom 7 cell of the release bounds (`routes/trails/7-X-Y.json`): each trail of the cell with the numbers of a list row and the pieces of its far line there, simplified at 100 m, or coarser while the file is larger than 400,000 bytes. It also writes one trail record file for each trail (`routes/long/ID.json`) with the whole record. `Kept` keeps the moving time of the plan route. `catalog::write` returns the trails. The metrics get `trail_hours` and `trail_files`. `planner/routing` revision 17. Mode: change #3615 Co-Authored-By: Claude Opus <noreply@anthropic.com>
trailview: the ground probe runs again only when the eye's height moves more than 1 cm
On a phone the card is fixed at the bottom of the screen. A card higher than the screen had its close button above the screen, where no scroll of the document reaches it. The place that fixes the card gives it a height limit (`--card-height`): the rows of the card keep their height, and the row of the description takes the rest and scrolls. The catalog allows a description of 200 characters, which gives a card of 248 px, so a card of today keeps its look; the limit is for a text that is longer. The TrailView window gives the card the room over its small map. Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The grid pack publishes `routes/trails/` and `routes/long/` of the routing step under `routes/tiles/` with their folders, as the route catalog contract names them. The step contract lists the new outputs. Two sentences of the route catalog contract are narrowed to be true for the far files and the trail record files. `trail_tiles` takes references and removes the far line of each entry once, so the rounds copy no unsimplified line. The metrics count the trails by moving time only (`trails_by_hours`) instead of listing the time of each trail. `planner/routing` revision 18. Mode: change #3615 Co-Authored-By: Claude Opus <noreply@anthropic.com>
A row and the card of a signed route read its cover from the live set of route pictures (specs/route-pictures.md), and draw its line on it in the colour of the route with a white glow. With no cover, they show the line on a plain ground as before. The map shows the credits of the cover of the card. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…de/explore-3516-covers
LegCache.route cuts the legs that it must request into chunks of at most 64 points that share their end points, with no chunk end at a turnaround. It sends the chunks two at a time. A chunk that does not join the chunk before goes out again, pinned to the end of that chunk. A chunk that gets busy or internal goes out again after 1 s, at most twice. joinedPlan has no point limit now. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
web: Explore page: polish round
Route catalog: the trail files
The device's trip progress record holds 32 days, and a send to it holds 32 waypoints. The web planner and the phone app read one constant each; the tests read it in place of the old literal. Co-Authored-By: Claude Opus <noreply@anthropic.com>
Co-Authored-By: Claude Opus <noreply@anthropic.com>
Each chunk is pinned to the end of the chunk before, so each join holds and no chunk goes out twice. Each gap of an edit goes out by itself, pinned to its own cached neighbours, and each chunk stays in the cache as it arrives. Route options need a plan that fits one request. The saved versions are calculated one after the other, so that they share the cached legs. The catalog spec says what a client without split requests offers. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A picture that goes aborts its load, and a row and the card of one route share one load and one bitmap. A failed manifest read is read again at most once in a minute, and a failed cell file is not kept. While a cover shows, the map shows the credits of the set. The unit test fixes the key that the cover script writes. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…er its picture Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A pinned gap that finds no path goes out again with one more leg on each side, so that a neighbour point can pass the other way. Only when that finds no path too does the whole run follow. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…nside A chunk that finds no path under the pin of the chunk before goes out again from one leg earlier, also in a run with no cached legs. A gap extends past every turnaround next to it, so that no request starts or ends at one. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The catalogue of a release with trail files has the templates `trails` and `trail`. The tile Worker serves the far files and the trail record files. The web reader gives the trails of a far view, with the pieces of each trail joined over its far files, and the whole record of one trail. The planner/index layer goes to revision 3, so that each release gets the new catalogue. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A run without cached legs stops after the widened request finds no path, so it does not send all its chunks again. Each failing chunk gets its own widened request, also in the second gap of a run. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
planner: route long plans in several route requests
A segment of a simplified far line can cross the view with no vertex in it, so a trail is in a far view when a segment meets the box. The far files of the last two views stay in the cache, no more. The optional config URLs are one list. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A catalog record gets the optional field `credit`. The Explore card shows it as "Route data: …", and the credits of the Explore map and of the TrailView window list each credit of their routes once. The map gets its extra credits also while no card is open. Co-Authored-By: Claude Opus <noreply@anthropic.com>
Co-Authored-By: Claude Opus <noreply@anthropic.com>
Planner release: publish and read the trail files
The phone route detail shows "Route data: …". The credits of a long route split at "; ", so each credit shows once. The Explore page escapes the plain-text record credits before the map joins them as HTML. Co-Authored-By: Claude Opus <noreply@anthropic.com>
… route; drop empty credit parts Co-Authored-By: Claude Opus <noreply@anthropic.com>
…m the trail name on a stage page The page #/trail/<id> shows the totals, a row for each stage in the map data, the stage lines on the map with a dot at each stage border, and the profile of the whole trail with the stage borders and numbers. It reads the trail record file and the cell files of the stages, and makes no route request. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…s back Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
… the trails test drops a record that tests nothing new Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…s no start mark; the review fixes The box of the map is the union of the bounds of the stage items, with 48 px padding on the place; the border dots come from the item lines. A map with border dots shows no start mark. "‹ Explore" always goes through its handler. The left card counts its stages directly. Tests cover stageNumbers, the taken ticks and the Explore state of the way back. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
router-build: the route catalog stores the moving time of each route and stage
Explore: the page of a long trail
The page shows `moving_s` of the record from the first frame, before and after its routing answer, so a stage has the same time on its trail page row and on its own page. A record with no stored time shows the routed time. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…record The trail page test checks that the Stage 2 row shows the time of its stage page. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
web: the page of a signed route shows the stored catalog time as Time
8 tasks done
… from the length rules A deck way is exempt from deck_min_m and the culvert rule only where a passage station lies strictly between its A lines; G8 uses the same test. The deck group merge reads the passages that its tag end keeps. G9 reads an A line at its tag end the snap length in. The water exception says what it tests. The storeys test's joint limit says where its count comes from. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…f booked height points_to_obcr measures the height step from the dead-band reference of the kept points, so the stored ascent and descent equal those of all points with fewer points per km. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The route service adds `point` to a `no_snap` error answer and `leg` to a `no_path` error answer, both counted from 0, so a client can leave out the point or keep the leg as a gap. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…r from a road, and keeps a leg with no legal path as a gap - The leg cache sends the chunks of a long plan with at most two requests in flight. After the answers, a leg that does not join its neighbour goes out again, pinned to both neighbours. A new routing package restarts the cache once. - A `no_snap` point is left out of the line, with the existing note and a Show button. A start, a finish or the end of a run beside a manual leg stays; the legs at it become gaps. - A `no_path` leg becomes a cached gap: a dashed straight line with no time and no climb, and the note "No legal path between 2 points". - The device sync does not send a line with a gap. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…e device Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
… climb differs The test line bends only at its second point, so the last-kept-point rule books 4/4 and fails it. The spec sentence names the two cases where the stored ascent and descent differ from a dead-band over the input points. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…-step obc-route: planned route lines keep a point at each 3 m of booked height
… hangs the page; review fixes - The leg of a gap finds its stop with a bounded search. The way back from a visit at the end of a run belongs to the visit. - Only the first and the last request point stay when no road is near; a visit at the end of a run is left out and keeps its anchor, where the manual leg after it starts. The note names its place. - An index outside the request goes up as an error, so a bad answer cannot repeat a request. - A service that names no leg in `no_path` gets the wider request at each pinned end. - `RoutingLine.leftOut` goes: nothing read it. - The test of a point with no road near it puts the point into the second request. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…it gets one, before a routed or a manual leg The stop of a visit is the end of its leg from the anchor to the place, where the line reaches the place, so `routeGaps` measures only a real miss. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Planner: route long plans two requests at a time, and keep the trip when one point or leg fails
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
…-passage ground plan graph: a bridge keeps the passage under it (#3639 P0)
…merge-develop-2 Third merge of develop into the planner-ux epic (#3286), at a954bbd. The epic removes route alternatives, the "Route options" list, its "?" help and the test route button; develop added the "Route options" link and the "?" again in #3695. They stay removed. Resolutions that are more than a choice of side: - Callout takes the takeFocus option of the town card, because develop moved the popup frame out of MapCallout. - The legs with no legal path (develop #3719) are route notes ("No legal path") beside the gaps, not one combined line. - The trip row keeps the dates and the stay chip at the top of the day list; the day count is develop's DayCount above the stops, hidden on a night page and in an open day, as the trip row is. - The profile keeps develop's part selection and the epic's title row, with no day labels, distance number or trip row. - Escape: the map selection or mode, then the part, then a town, a night page or the open day. The map closes its route details or its place list in the capture phase; closeList does nothing a second time. - PLANNER_ROUTING is at revision 22, above both sides. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_011wmjvLH9RnCjTsKg1o5SZM
13 tasks done
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Mode: skip: merge of develop into the epic branch of #3286
Requirements: none
Public docs: yes
Part of #3286. This pull request merges
developintoplanner-uxatf06072d91, in two merge commits:f9222000ctakesdevelopat7207097c6, andedce9c06ftakes it atbe962056e. Small commits follow each. It adds no feature.Do not merge without the owner's word. The section "Decisions for the owner" lists the cases where the two branches differ on one element.
The 34 conflicts
developwantedCompareList.sveltelib/uiCompareProfile.sveltelib/planner/route-options.tslib/planner/route-options.test.tsDayRow.sveltedevelop, no place kindItinerary.svelteuntrackfor the night pagelib/uiMapCallout.sveltetakeFocusonRoutes: the Signed routes view is gonetakeFocusstays,onRoutesgoesNightNode.sveltechildren; the counts follow the stay kindslib/ui; the distance in the units of the riderdevelopPlanner.svelte.test.tsStayonTestFinished, the typeTripPlannerApp.sveltedevelopPlannerApp.svelte.test.tsescapeandstayBoxstartAppgives the libraryPlannerMap.sveltecompare;highlightedLines,showNight,onRiderMoveonIdle; the route details in the popup, the route hint,aria-busydevelopwithoutcompare, with the three additions of the epicPlannerProfile.sveltegradePaths,Segmentedand the icon oflib/uidevelopPlannerQuery.sveltelib/uilib/ui; noconfigimportPlannerSurface.sveltedevelopQueryResults.svelteStopCard.sveltestopKmand the day tiles follow the unitsStopPicker.svelteTripBar.sveltedevelop(decision 1)TripRow.svelteStayChiplib/uiplan-session.svelte.tsautoNameplanSummary,followdevelopwithouttownName,presetNameandoptionOrderplan-session.test.tsautoNametestautoNametest stay; the alternatives tests goroute-closures.test.tsclosureLabelclosureNotenoteDistanceroute-difficulty.tsalpineLabel, noalpineNotealpineLabel(stretch)names the grade of the stretch (decision 2)route-difficulty.test.tsroute-gaps.tsgapLabelfor one gapgapNotewithnoteDistancegapLabelwithnoteDistanceroute-gaps.test.tsgapLabel,at, the loop startgapLabelroute-legs.tsrequestRoutegives one route; noaddbusyandinternaldevelopwith the call of the epic;addstays deletedrouting.tsrequestRoutewithoutalternativesMAX_REQUEST_POINTS;canOfferAlternativesMAX_REQUEST_POINTSstays; no alternativesrouting.test.tsrequestAlternativespacedLine,chunks, new typesdevelopwithoutrequestAlternativesdocs/content/software/trips.mddevelophost/obc-data-steps/src/planner.rsPLANNER_ROUTINGat revision 4PLANNER_ROUTINGat revision 19planner/router-build/README.mdhiking/alpineaccepts each known grade up to T6developwithout the alternatives sentencespecs/vectors/README.mdroute-answer.jsonhas one routeclimbs.jsonandroute-boxes.json; a new text forsigned-routes.jsonroute-answer.json; the other rows ofdevelopChanged without a conflict
In commits of their own:
323291e52:PlanTotals.svelte,RouteNotes.svelteandStayChip.svelteimport the icon fromlib/ui/Icon.svelte.developmoved the file; the epic's iconslock,ascentanddescentmoved with it.323291e52:PlanTotals.svelteshows the distance, the ascent and the descent withdistanceIn,heightIn,heightUnitandsettings.units. Its time comes fromplanView, whichdevelopchanged to the time at the pace of the route.323291e52:RouteNotes.svelteshows the place of a note in the units of the rider: "km 104.6 – 118.3" or "mi 65.0 – 73.5". The length usesnoteDistance, as before.323291e52:stopKminlib/planner/stops.tsgives "km 42–46" or "mi 26–29". The town rows and the town card use it.323291e52: the tests ofPlanTotalsandRouteNoteseach have one check with miles.25b8f1526:routeNotesinlib/planner/route-notes.tstakesAlpineStretchand callsalpineLabel(stretch). Its test gives each stretch a grade.In the merge commit, in conflicted files but outside the conflict hunks:
PlannerMap.svelte: the parts ofcomparethatdevelopkept are gone:compareData, thecomparesource and its two layers, the letter markers and the styles.compare-keyand.planner-map-letter.syncRouteVisibilityonly shows or hides the route layers.QueryResults.svelte: the distance column of the epic usesdistanceInandsettings.units. The rule "on route" under 50 m stays.StopCard.svelte: the helperatofdevelophas no user and is gone.TripBar.svelte: the comment above.ridenames all three controls.routing.test.ts: the test "offers route options only for a plan that fits one request" ofdevelopis gone. It readsline.primary, which the epic deleted.Planner.svelte.test.ts: one test line ofdevelopsetunpavedKm, which the epic deleted.PlannerApp.svelte: the button "Find another route" ofdevelopgoes to the Explore page. It keeps the rule of the epic: it does not show on a night page.docs/content/software/trips.md: three sentences of the merged paragraphs are shorter, so the page stays under its limit of 2,500 words. No fact is lost.Merged without a change, and checked:
lib/ui/Icon.svelte,editor.ts,search/presentation.ts,test-support/planner/MapStub.svelte,tests/browser/planner/stubs.js, the route build (source.rs,osm.rs,tests/routing.rs),planner/routerandspecs/route-api.md. A search foralternativesin the router, the route service, the route build, the route specs andcompanion-iosfinds onlyPlannerServiceTests.swift, which checks that the request has no such field.Decisions for the owner
TripBar.svelte).develop: Activity, Preset and Pace wrap by their room in the middle column. Under 1050 px the controls go to a second row.developsolved the overlap of planner: Activity and Preset no longer overlap in the top bar #3380 another way and added the pace select. At 1150 px the middle column has two lines: Activity, then Preset and Pace. The bar is 93 px high. No control covers another (screenshot 6).developlets the preset accept T5 and T6.Cases that the brief named, where both sides hold and no decision is necessary:
developrebuilt the label row with a legend. The text "Hover to inspect" is gone there too.developchanged only units and imports inPlannerProfile.svelte. The bottom card of the Route page is another component. The title row with the totals and the body height are those of the epic.developstays and does not show on a night page.developdid not change the text. The callout hastakeFocusof the epic and noonRoutes.Lost or superseded
Changes of the epic that are gone:
PlannerSurface.svelte. The legend ofdevelopsays when a route has no surface data.Changes of
developthat the deletions of the epic removed:CompareList.svelte,CompareProfile.svelteandroute-options.ts, with the test.developchanged:canOfferAlternativeswith its test,firstOptions,LegCache.add, four tests ofplan-session.test.tsand therequestAlternativeslines ofrouting.test.ts.closureNote,gapNoteandalpineNote. The labels of the epic replace them. The text "Route misses 2 selected points by up to …" is gone: each gap is one row. The rule for miles stays innoteDistance.PlannerProfile.svelte: the units of the day labels and of the distance number, and the trip row in the title row. The epic removed these elements.QueryResults.svelte: the detail text "… along route · … off route". The distance column of the epic shows the two numbers.StopPicker.svelteandStopCard.svelte: the lead sentence and the header withstop.fromtostop.to. The epic counts only the places of the stay kinds of the night.DayRow.svelte: the place kind after the heights.loadSearchSampleand the proponSample.developstill had the test route button.planner/router-build/README.md, and the two-route text ofspecs/vectors/README.md.trips.md: the sentences ofdevelopabout the row above the profile, the day labels, "Stay here" and "This night". The planner after the merge has none of these.Layer revisions
PLANNER_ROUTING_SOURCEis at revision 2 (66022373c).develophas 1. The source step makes the closure sets (doubtinosm::source), and the key of a step holds no code. So a store thatdevelopbuilt would keep its source layer and the closures ofdestination.destinationvalue the source files are the same, and the later steps are reused. That is correct.PLANNER_ROUTINGstays at revision 20.develophas 19 andplanner-uxhas 4. The package step callsdoubtitself for the access overlay, so its output changes also by its own code. The digests of its inputs cover each case that I found, but 20 costs at most one run of the package step, and each side raised this revision.PLANNER_SEARCHstays at revision 3.develophas 2 and did not changeplanner/searchorhost/obc-search-bake. The search build has no cached work layer: only the three routing work layers havecache: true. Each search step (model,policy,dump,records,pois,addresses) is a step ofplanner/search, so revision 3 changes each key: the dump runs with the two kept tags, andpoisruns withhas_poi.planner/placesand the grid steps read thepoisfiles and follow through the digest.Public docs
docs/content/software/trips.mdchanges in the merge commit, because the change is a conflict resolution. It describes the planner after the merge.Checks
Run on the head of this branch, on a Mac. The builds and checks took about 10 minutes of wall time in total; the longest were the browser journey (2 min 7 s) and
obc suites prepare(1 min 46 s).npm run checkinbuilder/web: 1,684 files, 0 errors, 0 warnings.npm testinbuilder/web: 230 files, 1,743 tests pass. Before that,npx vitest run src/components/planner/ src/lib/planner/: 67 files, 417 tests pass.npm run build:planner: the bundle builds.npm run test:planner --prefix builder/web/tests/browser(the journey with stub hosts): 42 pass, 1 fails.routes.test.js"the Routes page with a selected route" fails at 1440 px: the text of the card is 135 px wide and the test expects 140 px, so the profile and the button move by 2 to 5 px. The fixed boxes agree. The code of the Routes page is that ofdevelop; the merge changes only three icons oflib/ui/Icon.svelteinsrcoutside the two planner folders. I read this as the text width of this Mac. CI must confirm it.obc test -p planner-router-build: 93 pass.obc test -p planner-router: 19 pass.obc test -p planner-service: 4 pass.obc test -p obc-data-steps --no-fail-fast: 77 pass, 2 fail:planner::tests::a_geofabrik_region_reads_its_newest_extract_and_the_tiles_of_its_bounds(the last digit of a latitude) andsnow_reference::tests::a_version_makes_the_seasons_of_its_blocks_that_the_version_before_lacks. These are the two tests that fail on this Mac without a change.obc exec cargo clippy -p obc-data-steps --all-targets --no-deps -- -D warnings: clean.python3 docs/build_docs.py --check-links,obc prose --check,python3 tools/cairn/cairn.py check(39 violations, the baseline, 0 new) andobc suites check: all pass.obc test affected --base origin/planner-ux --dry-runselects every suite, because the diff holds all ofdevelop. I did not run the selection: CI is the gate.Left out:
develop(PlannerPreviewRoutes.swift,SignedRoutes.swift,PlannerPreviewLayers.swift,PlannerPreviewModelTests.swift) use no symbol that the epic deleted.planner/search:developdid not changeplanner/searchorhost/obc-search-bake.test:data,test:trailview,ux-study), the Python suites and the firmware checks.noteDistance.A look in a real browser (the dev server against the live services, 1440 × 1000, a two-day plan from Wachseldorn to Altdorf):
+between the days.Escapegoes back one level each time.The screenshots are in the private temp folder of the session, not in the repository:
shot-2-two-days-1440.jpg,shot-2b-notes-open-1440.jpg,shot-3-night-page-1440.jpg,shot-4-town-card-1440.jpg,shot-5-drawer-closed-1440.jpg,shot-6-top-row-1150.jpg.Review round 1
Two reviewers checked the pull request. These changes follow:
66022373crouting:the source layer of the routing bake is at revision 2. See "Layer revisions".30ef2b972planner:oneEscapeclosed the route details of the map and also went back one level in the side panel.PlannerMap.sveltenow closes the details in the capture phase and prevents the default; the window handler ofPlannerApp.svelteleaves anEscapewith a prevented default alone.PlannerApp.svelte.test.tshas one test for the page side. In a real browser, with a night page open and the details of a cycling route open, the firstEscapecloses the details and the second closes the night page.30ef2b972:route-notes.test.tshas a case for alpine stretches: two T4 stretches within 2 km are one row, and a T5 stretch between them is a row of its own.edce9c06f: a second merge ofdevelop, atbe962056e(14 commits: the Routes page sizes, the cover asks of rows, "Open in planner"). It has no conflict and touches no file of the two planner folders.planner-uxdid not move.Checks after these changes, about 75 seconds of wall time:
obc test -p obc-data-steps --no-fail-fast: 77 pass, 2 fail, the same two tests as before.clippywith-D warningsis clean.npm run check: 0 errors.npx vitest run src/components/planner/ src/lib/planner/: 67 files, 419 tests pass.npm test: 230 files, 1,751 tests pass.Third merge of
develop008b19a3fmergesdevelopata954bbd50(25 pull requests sincebe962056e). 23 files had a conflict. The rule: keep each change ofdevelop, and keep each removal of the epic. The owner confirmed again that route options, their "?" help and the test route button stay removed.develophad added the "Route options" link and the "?" again in #3695.developwantedplan-session,PlannerApp,PlannerMap,routing,route-legs,alternatives.rs)primary,unpavedKmDayCountabove the stops; dates and "Sleep in" in the elevation drawerDayCountabove the stops.TripRowhas the dates and the stay chip at the top of the day list. Both are hidden on a night page and in an open day.TripRow.svelte.test.tsis deleted:DayCount.svelte.test.tscovers the count.gapLabel)legGapsand one combinedgapNoterouteNotestakes the legs with no legal path as "No legal path" notes.gapNoteis deleted.takeFocusinMapCalloutCallout.svelteCallouthastakeFocuscloseListdoes nothing a second time, so the focus goes back to the mark.PLANNER_ROUTINGtrips.md,web-planner.mdChecks on
008b19a3f:npm run check: 0 errors, 0 warnings.npm test: 239 files, 1,845 tests pass.cargo test -p planner-router -p planner-service: all pass.npm run test:planner(browser): 55 of 56 pass.ride-page.test.jsfails with the FIT file name "download". It fails the same way ondevelopata954bbd50, and the merge changes no file of the ride page.prose --check,cairn check(0 new),build_docs.py --check-links,cargo fmt --check: clean.obc test -p obc-data-steps(only a revision number changed), the iOS suites (no Mac here).Generated by Claude Code