You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
Repository navigation
TrailView parts P10: the guide, the looks and the pictures of all kinds #3687
Size: M (the guide, the builder's looks, pictures)
Problem
After P7, every tunnel end draws a part and the bake proves each one, but the guide does not explain the parts, the looks are those of the prototype (colours, frame, the ends of the wing walls), and the owner has not seen all kinds together.
Scope
The guide docs/content/software/trailview-roads.md gets a section on the parts: why the bake places them and how the device only draws them; it links the spec.
Labelled pictures of every kind of part for the owner, today's app | new roads.
The looks: the colours, the frame, the ends of the wing walls, from the owner's notes on the pictures.
#3681 changed how the ground meets a part. The guide must explain it:
The part fills its boxes. There is one box per straight piece of the tube, at the middle of the wall, with a round roof for a round tube, and the outer shell runs to the end of the last box. The terrain draws nothing in those boxes.
The bake writes the cut of each built end: where the ground of the ground plan lies inside the boxes. The ground plan's mesh leaves a hole only there. The ground over the collar stays.
A change of BUILT or of a part's sizes needs a features bake.
The guide's section on the parts can say: the ground plan's mesh leaves a hole over the cut of each built end (the region cells that the cut meets are sharp; the constraints of such a cell are snap rounded); the structure mesh holds the parts in a range that only the ground plan draws and today's tunnel of the same chain in a range that only today's app draws; a built tunnel line stamps nothing from each opening to the start of its part's cover.
Activity
timohueser commentedon Nov 20, 2026
P3 (#3680, #3754): the looks as built
looksandinsideofdata/trailview/parts.json.coping_min the colourcoping, flush with the wall; it does not stand out.lift_munder the floor from the front of the head wall to the frame line, in the colourface; a road of the ground may lie over it.face,frame,copingandshell; the wings are inface.Generated by Claude Code
timohueser commentedon Nov 20, 2026
P4 (#3681): for the guide section on the parts
#3681 changed how the ground meets a part. The guide must explain it:
BUILTor of a part's sizes needs a features bake.The end face of the shell is a new look item.
Generated by Claude Code
timohueser commentedon Nov 20, 2026
P4 (b) (#3763): for the guide
The guide's section on the parts can say: the ground plan's mesh leaves a hole over the cut of each built end (the region cells that the cut meets are sharp; the constraints of such a cell are snap rounded); the structure mesh holds the parts in a range that only the ground plan draws and today's tunnel of the same chain in a range that only today's app draws; a built tunnel line stamps nothing from each opening to the start of its part's cover.
Generated by Claude Code