Skip to content

TrailView ground plan: a junction face's border cuts a fillet and the shoulder ring before their foot (c12, c16) #3184

Open

Description

@timohueser

Part of #3096. Found while designing #3182.

Problem

At some junctions the junction face ends where a fan or a fillet of the junction has not yet met the way's carriageway edge. The face border cuts it. Then the grey shoulder ring has a notch at the border, and a fillet ends as a stub, not at its foot (the point where it touches the way's edge tangentially).

Places

Pictures: /media/timo/OSM1/tmp/ground-plan/junctions/pics/ (INDEX.md). Each picture is a top view from the crate's faces and labels (ground-plan 2013925), without lighting. Left half: the port of #3183's stop-mouth rule. Right half: the junction-record rule of #3182. Blue: route look; brown: stop look; grey: shoulder.

  • c12 (census of ground-plan GP4: a stop mouth wears its unpaved arm's look #3183: service road and unpaved track, angled). Cell 34300/23098. Junction node 46.820347, 8.418890. The notch: about 46.820358, 8.418923.
    • pics/c12-16.png (16 m square): the shoulder has a notch where the junction face ends (about pixel 590, 380 of the left half). It is the same in both halves.
    • /media/timo/OSM1/tmp/ground-plan/gp4/m/census/zoom-c12.png: the "step and short tab" that ground-plan GP4: a stop mouth wears its unpaved arm's look #3183's census lists.
  • c16 (census: unclassified hairpin, near-parallel track). Cell 34293/23098. Junction node 46.822091, 8.379356. The stub: about 46.822064, 8.379324.
    • pics/c16-16.png (16 m square) and pics/c16-zoom.png (5 m square): the fillet between the track and the road arm ends at the junction face border about 0.1 m wide, before its foot. Beside it, the shoulder has a notch (left half).

Why any stop look makes it visible

What is known

  • At the seams, the paved outline lies within 5 mm of the carriageway edge (centre ± half-width) for 95 % of the 9,126 seam sides of the fixture. 300 seam sides (3.3 %) do not cross the paved outline within the seam cut: another face lies there. These are candidates for this fault (probe jprobe, /media/timo/OSM1/tmp/ground-plan/junctions/measure/).
  • Guess, not proven: the face ends at a seam (faces/points.rs region) or at a beyond cut of a fan that crosses a shared seam or a next turn (faces/mod.rs:938-1030). The fan's shoulder ring (band_rings) ends at the same cut.

Acceptance

  • At c12 and c16, the shoulder has no notch at the junction face border, and each fillet ends at its foot.
  • A count over every fixture cell: fans and fillets that a junction face border cuts before their foot. Target 0, or each remaining case named with its rule.
  • The owner's geometry rules hold: no special case for a junction kind; one general rule for the whole fixture; faces and checks as today elsewhere.

Generated by Claude Code

Metadata

Metadata

Assignees

No one assigned

    Labels

    No labels
    No labels

    Projects

    No projects

      Milestone

      No milestone

      Relationships

      None yet

      Development

      No branches or pull requests

      Issue actions