Revert "FROMLIST: arm64: dts: qcom: Enable lvds panel-DV215FHM-R01 for lemans-evk Mezzanine"

This reverts commit e0cc896.
Revert this change to rebase to v4 of lemans-evk-ifp-mezzanine
patch to include DT name change.

Signed-off-by: Umang Chheda <umang.chheda@oss.qualcomm.com>

Author: umang-chheda

arch/arm64/boot/dts/qcom/lemans-evk-mezzanine.dtso

@@ -11,62 +11,6 @@
 &{/} {
 	model = "Qualcomm Technologies, Inc. Lemans-evk Mezzanine";
 
-	panel_lvds: panel-lvds@0 {
-		compatible = "panel-lvds";
-
-		data-mapping = "vesa-24";
-
-		width-mm = <476>;
-		height-mm = <268>;
-
-		status = "okay";
-
-		panel-timing {
-			clock-frequency = <148500000>;
-			hactive = <1920>;
-			vactive = <1080>;
-			hfront-porch = <88>;
-			hback-porch = <148>;
-			hsync-len = <44>;
-			vfront-porch = <4>;
-			vback-porch = <36>;
-			vsync-len = <5>;
-			de-active = <1>;
-		};
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				dual-lvds-odd-pixels;
-				panel_in_lvds_odd: endpoint {
-					remote-endpoint = <&lt9211c_out_odd>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				dual-lvds-even-pixels;
-				panel_in_lvds_even: endpoint {
-					remote-endpoint = <&lt9211c_out_even>;
-				};
-			};
-		};
-	};
-
-	lcd_disp_bias: regulator-lcd-disp-bias {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd_disp_bias";
-		regulator-min-microvolt = <5500000>;
-		regulator-max-microvolt = <5500000>;
-		gpio = <&expander3 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
 	vreg_0p9: regulator-vreg-0p9 {
 		compatible = "regulator-fixed";
 		regulator-name = "VREG_0P9";
@@ -214,55 +158,6 @@
 	};
 };
 
-&i2c1 {
-	qcom,load-firmware;
-	qcom,xfer-mode = <1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&qup_i2c1_default>;
-
-	status = "okay";
-
-	lt9211c_codec: lvds-bridge@2d {
-		compatible = "lontium,lt9211c";
-		reg = <0x2d>;
-		reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
-		vcc-supply = <&vreg_s4a>;
-
-		status = "okay";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				lt9211c_in: endpoint {
-					data-lanes = <0 1 2 3>;
-					remote-endpoint = <&mdss0_dsi0_out>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-
-				lt9211c_out_odd: endpoint {
-					remote-endpoint = <&panel_in_lvds_odd>;
-				};
-			};
-
-			port@3 {
-				reg = <3>;
-
-				lt9211c_out_even: endpoint {
-					remote-endpoint = <&panel_in_lvds_even>;
-				};
-			};
-		};
-	};
-
-};
-
 &i2c18 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -284,26 +179,6 @@
 	};
 };
 
-&mdss0 {
-	status = "okay";
-};
-
-&mdss0_dsi0 {
-	vdda-supply = <&vreg_l1c>;
-	power-supply = <&lcd_disp_bias>;
-	status = "okay";
-};
-
-&mdss0_dsi0_out {
-	data-lanes = <0 1 2 3>;
-	remote-endpoint = <&lt9211c_in>;
-};
-
-&mdss0_dsi0_phy {
-	vdds-supply = <&vreg_l4a>;
-	status = "okay";
-};
-
 &pcie0 {
 	iommu-map = <0x0 &pcie_smmu 0x0 0x1>,
 		    <0x100 &pcie_smmu 0x1 0x1>,