[pull] dev from home-assistant:dev

homeassistant/components/collection_image/quality_scale.yaml

@@ -60,7 +60,9 @@ rules:
   test-coverage: done
 
   # Gold
-  devices: todo
+  devices:
+    status: exempt
+    comment: Adding a device adds no benefit for a single entity config entry.
   diagnostics: todo
   discovery-update-info:
     status: exempt

homeassistant/components/midea/quality_scale.yaml

@@ -34,37 +34,56 @@ rules:
   config-entry-unloading: done
   docs-configuration-parameters: done
   docs-installation-parameters: done
-  entity-unavailable: todo
+  entity-unavailable: done
   integration-owner: done
   log-when-unavailable: done
   parallel-updates: done
-  reauthentication-flow: todo
+  reauthentication-flow:
+    status: exempt
+    comment: >
+      Cloud login is only used transiently during the config flow to mint a
+      local device token/key, which is then stored and used for local polling
+      only; the cloud is never contacted again. midealocal.device.connect()
+      also swallows AuthException into a plain bool, so a rejected token/key
+      is indistinguishable from the device being offline and there is no
+      signal that could trigger a reauth flow.
   test-coverage: done
-
   # Gold
-  devices: todo
-  diagnostics: todo
-  discovery-update-info: todo
-  discovery: todo
+  devices: done
+  diagnostics: done
+  discovery-update-info: done
+  discovery:
+    status: exempt
+    comment: >
+      DHCP is used to synchronize the IP address of already configured devices
+      when their DHCP lease changes. It is not used for device discovery because
+      DHCP information alone is insufficient to identify and configure most supported
+      Midea appliances.
   docs-data-update: done
   docs-examples: done
   docs-known-limitations: done
   docs-supported-devices: done
   docs-supported-functions: done
   docs-troubleshooting: done
   docs-use-cases: done
-  dynamic-devices: todo
+  dynamic-devices:
+    status: exempt
+    comment: One config entry per physical device, no hub.
   entity-category: todo
-  entity-device-class: todo
-  entity-disabled-by-default: todo
-  entity-translations: todo
-  exception-translations: todo
-  icon-translations: todo
+  entity-device-class: done
+  entity-disabled-by-default: done
+  entity-translations: done
+  exception-translations: done
+  icon-translations: done
   reconfiguration-flow: done
-  repair-issues: todo
-  stale-devices: todo
+  repair-issues:
+    status: exempt
+    comment: No known use cases for repair issues, yet.
+  stale-devices:
+    status: exempt
+    comment: One config entry per physical device, no hub.
 
   # Platinum
   async-dependency: todo
-  inject-websession: todo
+  inject-websession: done
   strict-typing: done

homeassistant/components/picotts/manifest.json

@@ -1,7 +1,7 @@
 {
   "domain": "picotts",
   "name": "Pico TTS",
-  "codeowners": ["@rooggiieerr"],
+  "codeowners": ["@rrooggiieerr"],
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/picotts",
   "integration_type": "service",

homeassistant/components/sofar/manifest.json

@@ -7,6 +7,6 @@
   "documentation": "https://www.home-assistant.io/integrations/sofar",
   "integration_type": "device",
   "iot_class": "local_polling",
-  "quality_scale": "silver",
+  "quality_scale": "platinum",
   "requirements": ["sofar-modbus==0.14.0"]
 }

homeassistant/components/sofar/quality_scale.yaml

@@ -30,7 +30,9 @@ rules:
   # Silver
   action-exceptions: done
   config-entry-unloading: done
-  docs-configuration-parameters: done
+  docs-configuration-parameters:
+    status: exempt
+    comment: This integration does not provide an options flow.
   docs-installation-parameters: done
   entity-unavailable: done
   integration-owner: done
@@ -51,12 +53,12 @@ rules:
     status: exempt
     comment: Modbus TCP gateways are not announced over any discoverable protocol.
   docs-data-update: done
-  docs-examples: todo
+  docs-examples: done
   docs-known-limitations: done
   docs-supported-devices: done
   docs-supported-functions: done
   docs-troubleshooting: done
-  docs-use-cases: todo
+  docs-use-cases: done
   dynamic-devices: done
   entity-category: done
   entity-device-class: done
@@ -65,7 +67,9 @@ rules:
   exception-translations: done
   icon-translations: done
   reconfiguration-flow: done
-  repair-issues: todo
+  repair-issues:
+    status: exempt
+    comment: This integration has no user-actionable issues to repair.
   stale-devices: done
 
   # Platinum

homeassistant/components/tesla_fleet/coordinator.py

@@ -152,6 +152,8 @@ def __init__(
     async def _async_update_data(self) -> dict[str, Any]:
         """Update vehicle data using TeslaFleet API."""
 
+        self.update_interval = VEHICLE_INTERVAL
+
         try:
             # Check if the vehicle is awake using a free API call
             response = await self.api.vehicle()
@@ -166,11 +168,16 @@ async def _async_update_data(self) -> dict[str, Any]:
         except VehicleOffline:
             self.data["state"] = TeslaFleetState.ASLEEP
             return self.data
-        except RateLimited:
-            LOGGER.warning(
-                "%s rate limited, will skip refresh",
-                self.name,
-            )
+        except RateLimited as e:
+            if isinstance(e.data, dict) and (after := e.data.get("after")):
+                LOGGER.warning(
+                    "%s rate limited, will retry in %s seconds",
+                    self.name,
+                    after,
+                )
+                self.update_interval = timedelta(seconds=int(after))
+            else:
+                LOGGER.warning("%s rate limited, will skip refresh", self.name)
             return self.data
         except (InvalidToken, OAuthExpired) as e:
             _invalidate_access_token(self.hass, self.config_entry)
@@ -180,8 +187,6 @@ async def _async_update_data(self) -> dict[str, Any]:
         except TeslaFleetError as e:
             raise UpdateFailed(e.message) from e
 
-        self.update_interval = VEHICLE_INTERVAL
-
         self.updated_once = True
 
         if self.api.pre2021 and data["state"] == TeslaFleetState.ONLINE:
@@ -238,13 +243,13 @@ async def _async_update_data(self) -> dict[str, Any]:
         try:
             data = (await self.api.live_status())["response"]
         except RateLimited as e:
-            if isinstance(e.data, dict) and "after" in e.data:
+            if isinstance(e.data, dict) and (after := e.data.get("after")):
                 LOGGER.warning(
                     "%s rate limited, will retry in %s seconds",
                     self.name,
-                    e.data["after"],
+                    after,
                 )
-                self.update_interval = timedelta(seconds=int(e.data["after"]))
+                self.update_interval = timedelta(seconds=int(after))
             else:
                 LOGGER.warning("%s rate limited, will skip refresh", self.name)
             return self.data
@@ -320,13 +325,13 @@ async def _async_update_data(self) -> dict[str, Any]:
         try:
             data = (await self.api.energy_history(TeslaEnergyPeriod.DAY))["response"]
         except RateLimited as e:
-            if isinstance(e.data, dict) and "after" in e.data:
+            if isinstance(e.data, dict) and (after := e.data.get("after")):
                 LOGGER.warning(
                     "%s rate limited, will retry in %s seconds",
                     self.name,
-                    e.data["after"],
+                    after,
                 )
-                self.update_interval = timedelta(seconds=int(e.data["after"]))
+                self.update_interval = timedelta(seconds=int(after))
             else:
                 LOGGER.warning("%s rate limited, will skip refresh", self.name)
             return self.data
@@ -401,13 +406,13 @@ async def _async_update_data(self) -> dict[str, Any]:
         try:
             data = (await self.api.site_info())["response"]
         except RateLimited as e:
-            if isinstance(e.data, dict) and "after" in e.data:
+            if isinstance(e.data, dict) and (after := e.data.get("after")):
                 LOGGER.warning(
                     "%s rate limited, will retry in %s seconds",
                     self.name,
-                    e.data["after"],
+                    after,
                 )
-                self.update_interval = timedelta(seconds=int(e.data["after"]))
+                self.update_interval = timedelta(seconds=int(after))
             else:
                 LOGGER.warning("%s rate limited, will skip refresh", self.name)
             return self.data

homeassistant/components/waqi/coordinator.py

@@ -44,4 +44,4 @@ async def _async_update_data(self) -> WAQIAirQuality:
                 self.subentry.data[CONF_STATION_NUMBER]
             )
         except WAQIError as exc:
-            raise UpdateFailed from exc
+            raise UpdateFailed(str(exc)) from exc

homeassistant/package_constraints.txt

@@ -72,7 +72,7 @@ standard-telnetlib==3.13.0
 typing-extensions>=4.16.0,<5.0
 ulid-transform==2.2.9
 urllib3>=2.0
-uv==0.12.11
+uv==0.12.12
 webrtc-models==0.3.0
 yarl==1.25.1
 zeroconf==0.151.3

pyproject.toml

@@ -77,7 +77,7 @@ dependencies = [
   "typing-extensions>=4.16.0,<5.0",
   "ulid-transform==2.2.9",
   "urllib3>=2.0",
-  "uv==0.12.11",
+  "uv==0.12.12",
   "probatio==0.12.1",
   "yarl==1.25.1",
   "webrtc-models==0.3.0",