Repository navigation
thunderbolt: apple: let T6020 DP IN tunnels wait for a display pipeline - #2636
RyanTheTide wants to merge 1 commit into
Conversation
apple_dpin_m2, the T6020/T6021 (M2 Pro/Max) ACIO policy, leaves
capacity_retry off "pending M2 hardware qualification". A DP IN tunnel
that finds no free display pipeline gets -EBUSY once and that is final
("dpin0: DP tunnel setup failed: -16"). The connection manager keeps
the tunnel through the DPRX timeout (TB_HOST_DP_KEEP_DPRX_TIMEOUT), but
nothing asks for a pipeline again, so the display stays dark.
On a MacBook Pro 16" M2 Pro (j416s) with a monitor on a Thunderbolt
cable and a TV on a USB-C to HDMI adapter (DP Alt Mode), the fabric
moves the TV to dcpext1 at boot and gives the tunnel dcpext0. After a
system resume the TV comes back first on dcpext0 and the tunnel's
request is refused. The fabric moves the TV to the other pipeline
a few seconds later, too late for a request that is not retried.
Set capacity_retry on apple_dpin_m2. A refused tunnel then waits as on
M1: the DP IN work arms its retry and routes the tunnel once a pipeline
comes free. M2 needs no dp_tunnel_awaits_display hook, which is set up
for the APPLE_DPIN_CHANGED flow only: KEEP_DPRX_TIMEOUT already keeps
its tunnels. As on M1, -EAGAIN waits too: an attempt that prepare cut
short returns it and has to ask again after complete. A DCP service
that is never published then waits until unplug, with a 120 s readiness
wait per retry, where it used to fail once.
Pause these retries across system sleep and at NHI removal. The PM gate
(apple_dpin_pause_retries(), apple_dpin_resume_retries(),
apple_dpin_end_pm_gate()) now applies wherever the policy has
capacity_retry or defer_new_bringup, not defer_new_bringup only.
apple_nhi_prepare() pauses the retries of a gated policy without
defer_new_bringup (M2) before its resume_recovery=0 return, so at the
default a waiting M2 tunnel stops asking at prepare; with
resume_recovery set it pauses where M1 does. Either way its pause ends
when complete starts, before tb_domain_complete(): every device has
resumed by then, and the tunnel that the domain's complete brings back
makes its first attempt there, since M2 does not defer it. Its retries
then run from the refusal on, as before, and do not wait for the end of
complete, which can take seconds. M1 and M3 at the default are
unchanged: their pause stays behind resume_recovery (6ceb98a).
Without the gate a waiting M2 tunnel would keep calling into appledrm on
the non-freezable dp_wq while the DCPs power off, and after the NHI is
removed. M2 does not get defer_new_bringup: that would defer every first
M2 handoff across sleep, which has not been tested, and DPRX retention
for a deferred handoff goes through the hook M2 does not install.
apple_dpin_end_pm_gate() now pauses both adapters before it drains
them, as apple_dpin_pause_retries() does: work in flight at NHI removal
could otherwise get -EBUSY and rearm the retry it had just cancelled.
On M1 this is the only change: a bring-up in flight at NHI removal is
deferred and then dropped instead of attaching. Base M2 (T8112) uses
apple_dpin_m1, and M3 is unchanged.
Update the comments above apple_dpin_work_fn() and
apple_dpin_pause_retries(), which named M1-family hosts. Tests: the M2
row of apple_dpin_all_policy_fields; the t602x rearm trace, whose -EBUSY
now waits and recovers; the capacity trace run for M2 as well; terminal
errors end an M2 wait; apple_dpin_m2_capacity_suspend (pause, resume, a
refusal after the pause has ended, resume with no pause, -EAGAIN under
pause, unplug while waiting, end of the gate).
In omacom/linux-aurora, commit 068fd09 ("thunderbolt: apple: let
T6030 DP IN tunnels wait for a display pipeline") restores the same
flag for M3 after the #139 merge dropped it; M2 never had it.
Testing: j416s, DCP firmware 13.5, under the m1n1 hypervisor,
pm_test=platform, with a bench-only DT change that keeps the
hypervisor's USB-C port out of the DCP routes. Monitor and TV: the
monitor came back after 6 of 6 resumes with this change (0 of 2 without,
on aurora 7.3 ac6b017, same thunderbolt and appledrm code), routed
6.2-6.5 s after the refusal and 3.4-3.8 s ahead of the DPRX timeout; no
DPRX timeout, no kernel WARNINGs. Monitor alone: back after 4 of 4
resumes, no wait. KUnit apple-dpin-lifecycle 35 of 35.
Not tested: natively, a suspend while a tunnel waits (KUnit only),
j414s, j414c, j416c, other firmware, a wait past the DPRX timeout, NHI
removal while waiting.
Assisted-by: Claude:claude-opus-5-5 checkpatch
Signed-off-by: nekolyanich <me@nekolyanich.com>
Assisted-by: LLM
Signed-off-by: Ryan Murray <ryan@aurorasilicon.org>
|
Looks good; approve once the native J414s/J416s resume row is in. I checked the PM gate ordering in drivers/thunderbolt/apple.c:
The KUnit traces cover pause/resume, -EAGAIN under pause, unplug while waiting and the end of the gate.
HW row: J416s or J414s booted natively (no hypervisor, no bench DT change) on the default command line, this kernel, monitor on Thunderbolt plus TV on a USB-C/HDMI adapter. 10 real s2idle resumes: the monitor comes back every time, 0 DPRX timeouts, 0 new kernel errors, 0 failed units. Also one resume row each on M1 Pro (J316s) and base M2 (J413) showing no change. Assisted-by: LLM (Claude:Opus 5.5) |
|
Merge-train adversarial review (MERGETRAIN-LINUX2) at be80190: BLOCKERS. Not merging until the blockers below are fixed or answered; the details give file:line and a failure case. Full review#2636 thunderbolt: apple: let T6020 DP IN tunnels wait for a display pipeline @be801904VERDICT: BLOCKERS Blockers
Nits
Missing rows
|
|
Correction to my merge-train review above: the commit trailer is not a merge blocker. Our rule for already-pushed commits is to leave history alone (no force push), so the code verdict stands as NO BLOCKERS. The missing rows listed there still apply, and Dj's verdict is still needed. For new commits, please keep agent trailers out. |
DjDeveloperr
left a comment
There was a problem hiding this comment.
Pre-PR checklist review (§1–§6) at be80190452f4ab420c2e57648ac46cfe6db3242e: code changes look sound, but requesting changes for a §4 commit-attribution violation and an inaccurate commit message / PR body, plus missing native §5 hardware rows.
Blockers
- §4 Attribution (hard rule): Commit
be80190452f4ab420c2e57648ac46cfe6db3242ecarries prohibited AI trailers inside the commit message:Assisted-by: Claude:claude-opus-5-5 checkpatchAssisted-by: LLM
Per §4 of the pre-PR checklist, commits must carry human author/committer and humanSigned-off-by:only (zeroCo-Authored-By:orAssisted-by:trailers in commits). Becauserescue/pr426-t6020-dp-in-retry-rebase-20261121is an unmerged PR branch freshly rebased ontointegration/aurora, please strip bothAssisted-by:lines from the commit message while preservingAuthor: nekolyanich <me@nekolyanich.com>and both humanSigned-off-by:lines. (TheAssisted-by:line at the end of the PR body already handles disclosure.)
- Inaccurate commit message and PR body: Both state that
apple_nhi_prepare()pauses M2 "before itsresume_recovery=0return" and that "M1 and M3 at the default are unchanged: their pause stays behindresume_recovery(6ceb98a238d8)." On currentintegration/aurora,drivers/thunderbolt/apple.c:2945-2946has noresume_recovery=0early return —apple_dpin_pause_retries(acio)already runs unconditionally on every sleep for all gated policies, and this diff does not modifyapple_nhi_prepare(). Please update the commit message and PR body to match the rebased diff (and replacem1n1 hypervisorwording if rewording under §6).
Verified (code)
apple_dpin_m2.capacity_retry = trueandapple_dpin_pm_gated()(p->capacity_retry || p->defer_new_bringup) cleanly coverapple_dpin_pause_retries(),apple_dpin_resume_retries(), andapple_dpin_end_pm_gate().apple_dpin_end_pm_gate()(drivers/thunderbolt/apple.c:2831-2846) pausing both adapters underc->lockbeforecancel_delayed_work_sync(&c->retry)+flush_work(&c->work)closes the race where in-flight work returning-EBUSYcould rearm the cancelled retry.apple_nhi_complete()(drivers/thunderbolt/apple.c:3086-3090) resumes non-deferred policies (M2) beforetb_domain_complete()and deferred policies (M1/M3/M4/M5) after it, skipping both onpm_dark_wake().- KUnit additions in
apple-dpin-test.ccover the new transitions well, andhost-testsCI is green.
Missing §5 hardware evidence (needed on the updated head)
The only hardware runs attached so far are pre-rebase (bb91b3fceaae) under a hypervisor with pm_test=platform and a bench-only DT change. Before approval:
- Native T6020/T6021 (J414s/J416s, and J414c/J416c if available): default kernel command line (no hypervisor, no bench DT change), monitor on Thunderbolt + TV on USB-C/HDMI adapter, real s2idle resumes (e.g. 10x) — monitor recovers every time, 0 DPRX timeouts, 0 SELinux denials, 0 failed units, 0 new kernel errors.
- Regression row on a
defer_new_bringuphost (M1/M3/M4) + base M2 (T8112): boot, s2idle resume, and NHI unbind/rebind with a DP tunnel active to coverapple_dpin_end_pm_gate()'s pause-before-drain change.
Assisted-by: LLM (Gemini 4 Neon)
|
Superseded by #2790. The replacement retains the patch and both human sign-offs, corrects the sleep prepare and completion descriptions, and removes the AI trailers from the commit message. Arm64 KUnit passed 39 cases with one skip. Native resume and regression rows remain pending on the replacement. |
Replaces #1692, rebased onto current integration/aurora (conflicts in drivers/thunderbolt/apple.c: the base now pauses DP IN retries in apple_nhi_prepare() on every sleep and gates the resume in apple_nhi_complete() on pm_dark_wake() after apple_nhi_cio_complete(); prepare keeps the base code, which now also pauses M2 through apple_dpin_pm_gated(), and complete keeps the PR's early resume before tb_domain_complete() for policies without defer_new_bringup, after apple_nhi_cio_complete() and skipped on a dark wake like the base's).
Let T6020/T6021 (M2 Pro/Max) DP IN tunnels wait for a free display pipeline, so a Thunderbolt display comes back after resume. Rebased onto integration/aurora at 78ea426.
This is nekolyanich's change from #426, as ported in
review/pr426-integration-t3094-v3(bb91b3f). Authorship and sign-off are unchanged; the port applies to current integration without conflicts.Problem
apple_dpin_m2leavescapacity_retryoff, so a DP IN tunnel that finds no free pipeline gets -EBUSY once and that is final (dpin0: DP tunnel setup failed: -16). The connection manager keeps the tunnel through the DPRX timeout, but nothing asks again and the display stays dark. On a MacBook Pro 16" M2 Pro (j416s) with a monitor on Thunderbolt and a TV on a USB-C to HDMI adapter, the TV takes dcpext0 first after resume and the tunnel is refused; the fabric frees a pipeline a few seconds later, too late.Change
capacity_retry = trueonapple_dpin_m2: a refused tunnel waits and retries as on M1. -EAGAIN waits too.TB_HOST_DP_KEEP_DPRX_TIMEOUTalready keeps M2 tunnels, so there is nodp_tunnel_awaits_displayhook.capacity_retrypolicies too. M2 pauses at prepare also at the defaultresume_recovery=0and resumes when complete starts, so a tunnel refused inside complete retries in time. M1 and M3 at the default are unchanged.apple_dpin_end_pm_gate()pauses both adapters before draining, so work in flight cannot rearm the retry it just cancelled.apple_dpin_all_policy_fields, the t602x rearm trace, the capacity trace for M2, terminal errors ending an M2 wait, andapple_dpin_m2_capacity_suspend.Base M2 (T8112) uses
apple_dpin_m1and is unchanged.Testing
On this branch:
kunit.py, arm64 qemu, LLVM=1)apple-dpin-lifecycle37/37 includingapple_dpin_m2_capacity_suspend, 108 of 109 overall (sameCONFIG_UCLAMP_TASKskip);drivers/thunderbolt/builds withW=1(defconfig +asahi.config, arm64), no warnings;checkpatch.pl --strict: no code findings;run-host-tests.py --onlycio-native 1/1, pciec-policy 1/1, tb-dock-pm 1/1, tb-cio-sleep 1/1, tb-dp-repair 2/2.kunit.py, arm64 qemu):apple-dpin-lifecycle37/37 includingapple_dpin_m2_capacity_suspend,thunderboltsuite passing; 108 of 109 overall, the one skip is an unrelated G17 mailbox case that needsCONFIG_UCLAMP_TASK.checkpatch.pl --strict: clean.Hardware, by nekolyanich on J416s (M2 Pro) with this port (bb91b3f) under the m1n1 hypervisor, monitor on TB plus TV on an adapter:
-95, 0 DPRX timeouts.Still to run: a native (non-hypervisor) J414s/J416s row, and a no-regression boot and resume on base M2 (T8112) and M1.
Thanks to nekolyanich for finding, fixing and testing this.
Assisted-by: LLM (Claude:Opus 5.5)