Repository navigation
Conversation
The A8's GX6450 runs the same family of firmware as the A9's, so it becomes a variant of the S8003 chip file rather than a new driver (drivers/gpu/0063-0073): - 0063-0064: the S8003 chip described in a variant table, and chip hooks for its own GPU ID read and heap table. These touch the A9 and A10 paths; their values and functions are unchanged. - 0065: dt-bindings for apple,t7000-gpu. - 0066: a GPU node without power domains, and the failing probe step named (shared powervr code; nodes with power domains are unchanged). - 0067-0069: the A8's firmware boot and power up and down in Apple's order, compute jobs, and TA/3D render jobs with the parameter-manager pool (a8_pm_blocks, a8_pm_grow) and the region-header ring kept in the HWRT data set. - 0070: fault and hang reports and recovery. - 0071: completion checks in the firmware interrupt's thread, the re-check after an early interrupt, a publish that cannot leave a failed job in the firmware's ring, Apple's doorbell. - 0072: a fragment job submitted behind its geometry job, with two alternating 3D records (a8_joint, off by default). - 0073: statistics and the A8's job timeline in debugfs apple_jobs, last. It also points the firmware's TA and 3D time words at the channel's times; the series without it has not run on the device. Config: CONFIG_DRM_POWERVR_APPLE goes from unset to =y on apple-4k, as on apple-16k, so the A8 gets powervr's Apple glue. It builds into the powervr module on every A7, A8 and A8X kernel; only boards whose device tree enables an apple,t7000-gpu node bind it. Assisted-by: LLM
The iPod touch 6 RAM-boots through checkm8, PongoOS and m1n1 to the USB serial shell. Its descriptor, boot assets and firmware recipe pin the public iOS 12.5.8 IPSW. devices/t7000/0011 describes the A8's GPU in t7000.dtsi (the Rogue core, Fender, the power manager and GPU bridge registers, five interrupts, the firmware name) and enables it on the N102, where powervr's A8 variant runs Vulkan and OpenGL ES (through Zink) jobs. Orchard's feature list has no GPU entry and the chip's [gpu] table records dEQP results, which the A8 does not have yet, so the GPU state is in devices/n102/README.md. docs/compatibility.md is regenerated. Assisted-by: LLM
The iPad mini 4 (J96, J97) and the iPhone 6 and 6 Plus (N61, N56) have the iPod touch 6's A8 GPU. devices/t7000/0012 enables the GPU node in their shared board files (t7000-mini4.dtsi, t7000-6.dtsi) so people with these boards can test it; the driver has run only on the iPod touch 6. Each board's README asks for the probe and ladder results. The A8X (T7001) has a different GPU and is unchanged. Assisted-by: LLM
minimal-boot with a constant USB serial number, the kernel's modules, the GPU firmware and a8-gpu-drm-test, which loads powervr and checks the probe, Mesa's Vulkan path and two DRM-level replays, each step under a hardware watchdog with its kernel lines saved. It builds for every A8 board (n102, j96, j97, n61, n56). tools/extract-fw.py writes the GPU firmware and its border colour table from Apple's public iPod touch 6 iOS 12.4 IPSW, read over HTTP ranges with orchard's own IPSW and kernelcache code, or from another IPSW or kernelcache. Nothing from Apple is in the repository, and everything build.sh stages is git-ignored. Assisted-by: LLM
a8-vk-smoke (Vulkan probe, compute, a triangle) and a8-vk-ladder, a set of Vulkan tests from one clear to vkmark's scenes with every pixel or value checked on the CPU, both MIT. vk/make-bundle.sh builds them with a Mesa build of the A8 branch into the self-contained /opt/a8vk bundle that build.sh's A8_VK_DIR stages, with vkmark when it is installed. Assisted-by: LLM
The iPod touch 6 keeps its flash behind ANS1 like the iPad Air 2, but its ANS firmware (iOS 12.4) speaks RTKit 10.2, where the storage endpoint is 6 instead of 0x20. - soc-apple/0028: RTKit 10 firmware sends its minor version in the HELLO's minimum-version field and wants it back; keep it, answer with it and let drivers read the protocol version. RTKit 11 and later are unchanged. - block/0003: asp takes its storage endpoint from the protocol version (6 on 10.2, 0x20 on 11 and later); 10.0 is refused by name. - devices/t7000/0013: the ANS nodes, as Nick Chan wrote them. - devices/t7000/0014: enabled on the N102 only, ps_ans kept on as the boot loader leaves it. The iPad Air 2 (J81, RTKit 12) runs the same rtkit and asp code; its path is meant to be unchanged and was not retested. Assisted-by: LLM
ANS1's write unlock opens the whole controller, so only the driver keeps writes off the auxiliary namespaces (LLB, firmware, NVRAM, SysCfg with the factory calibration, ...). Check each command against the ones the driver uses (identify, the user area's read, write and flush, the write unlock and the auxiliary reads) before it is queued; anything else, auxiliary writes and format commands included, is refused. Shared with the iPad Air 2 (J81), which uses only those commands; not retested there. Assisted-by: LLM
With ANS1 on the iPod touch 6, Orchard installs to its user area (asp0n1) next to a shrunk iOS: storage_read and storage_write are working. The board now meets every install requirement. The catalog gets the board's drivers (it had none yet). The ANS1 driver is not one the catalog looks for, so the matrix lists storage as working with no driver binding, as for the iPad Air 2. Assisted-by: LLM
This was referenced Nov 21, 2026
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Depends on #196 (it adds
devices/n102). This branch carries #196's commits plus a merge of current main, so review only the last 3 commits.The iPod touch 6 keeps its flash behind ANS1, like the iPad Air 2, but its ANS firmware (iOS 12.4) speaks RTKit 10.2. There the storage endpoint is 6, not 0x20.
Commits
soc-apple/0028: RTKit 10 firmware sends its minor version in the HELLO and wants it back. Taken from Nick Chan's ans1 branch (author kept) and reduced to that handshake, on top of Hoolock's RTKit 10 support.block/0003: asp takes its storage endpoint from the protocol version.devices/t7000/0013: Nick's ANS nodes, unchanged.devices/t7000/0014: enabled on the N102 only.block/0004). ANS1's write unlock opens the whole controller, so the driver refuses every command it doesn't use. That covers writes to the auxiliary namespaces (LLB, firmware, NVRAM, SysCfg) and the format commands.storage_readandstorage_writeto working, makes n102 installable (tests/test_catalog.py), adds n102's entry todrivers.jsonand regenerates the matrix.Tested (iPod touch 6, iOS 12.4 next to it)
asp0n1) and nine auxiliary namespaces, and read data back.asp0n1only, and the installed system boots.exp_hw_support, it had the first revision ofpower/0042, and it had a testLOCALVERSIONandWATCHDOG_SYSFS. It also lacked main's 98a62f0. This exact head has not flown.Shared code
soc-apple/0028,block/0003andblock/0004also run on the iPad Air 2 (J81, RTKit 12). Its path is meant to be unchanged. It was not retested.Notes
asp) to a storage feature, so the matrix lists n102's storage as "working, but no driver binds", like J81 today. Addingasptofeature-drivers.tomlwould fix both boards, but it also changes J81 and J82's rows, so it is left for a separate change.🤖 Generated with Claude Code