A free, open-source app that brings your AirPods' features to Windows 10 and 11.
Tip
No Test Mode. No Secure Boot changes. Most AirPods apps for Windows ask you to switch Windows into Test Mode to get all their features, which lowers your PC's security. WPods doesn't: you install it like any other app, and Secure Boot stays on. To our knowledge, WPods is the only AirPods app for Windows that gives you every feature this way.
Note
WPods is an independent project. It is not made, affiliated with, sponsored, endorsed or supported by Apple Inc. Apple product and feature names are used only to describe compatibility.
Download | Features | Before you install | Install | Uninstall | Help | Support


The nearby popup on a Windows 11 desktop.
See the full home screen

- Free and open source. GPL-3.0, no drivers of its own. No trial, no subscription.
- Stereo sound while the mic is on. Your AirPods mic shows up in Windows as
Headset (A2DP, <AirPods name>), for example "Headset (A2DP, AirPods Pro)". Music and game audio stay stereo instead of dropping to the low-quality hands-free mode. Works on AirPods 4, AirPods 4 (ANC), AirPods 5, AirPods Pro 2 and Pro 3, and AirPods Max 2; older models send their mic only in hands-free mode (see Supported AirPods). - HD voice for older AirPods (experimental). AirPods without the stereo mic get their mic through WPods, in the best voice codec the AirPods and your Bluetooth adapter manage, with mic modes and voice enhancement. Sound turns mono while an app uses the mic. Turn it on per pair in Windows settings.
- Mic modes you can tune. Standard, Voice Isolation and Wide Spectrum, each with a choice of noise-suppression models that run locally on your PC. Over a dozen models, plus Raw (no processing). Every model shows how heavy it is.
- Voice enhancement. Make your voice clearer and more even for calls.
- Full AirPods controls. Noise control with Adaptive, conversation awareness with an adjustable "Lower media to" level, Personalized Volume, Hearing Aid and Media Assist, heart rate on AirPods Pro 3, press speed, press-and-hold settings, tone volume and more.
- Nearby popup, like on iPhone. When your AirPods are near and connected to another device, WPods shows them with their battery. One click to connect. Works with several pairs.
- Hotkeys that work anywhere. Switch noise control and mic modes, connect or disconnect, or turn the mixer, low latency, Hearing Aid and more on and off, without leaving your game or call.
- Mixer. Hear your own mic or any other audio device in your AirPods, each at its own volume, on top of everything else.
- Low latency for sound and mic for games and calls. Each keeps its side awake: game sounds don't arrive late, and your voice comes through the moment you start talking.
- One installer does it all. It installs .NET and WebView2 if missing, plus WPods' background service and usbip-win2. Works with Secure Boot on.
- Looks at home on Windows. Light, Dark or Auto theme and your Windows accent color. 45 languages.
Features show only when your AirPods model supports them. See Supported AirPods.
- Connect, Disconnect and Reconnect from the Home screen. Connecting takes your AirPods over from another device, such as your phone.
- Left, Right and Case battery with rings and charging state. AirPods Max show one battery value. You get a message when the battery is low.
- Several pairs of AirPods? Switch between them from the Home header.
- "Pair new AirPods" guide in 3 steps: open the lid, hold the back button until the light flashes white, choose them in Windows "Add a device".
- See each AirPod's state: In ear, Out or In case.
- "Ear detection" pauses audio when you take an AirPod out (AirPods Max: when you take them off).
- Off, Transparency, Adaptive (on models that support it) and Noise Cancellation.
- Noise Cancellation and Adaptive need both AirPods in, unless you turn on "Noise cancellation with one AirPod".
- "Allow 'Off' in listening modes" adds Off to the modes you switch between by pressing and holding the stem (AirPods Max: the noise control button).

- Double-press speed: Default, Slower or Slowest.
- Press-and-hold duration: Default, Shorter or Shortest.
- "Press and hold cycles through": pick at least 2 of Off, Transparency, Adaptive and Noise Cancellation.
- Tone volume for chimes like the connect sound.
- Conversation awareness "Lower media to" level, from 10% to 90%.
- Conversation awareness lowers your media and brings voices forward when you speak.
- Personalized Volume adjusts media volume to your surroundings.
- Hearing Assistance (AirPods Pro 2 and Pro 3): Hearing Aid, plus Media Assist for music, video and calls. Both use the hearing settings from your iPhone or iPad, so set those up there first. Hearing Aid works in Transparency. Media Assist for calls only works when the call uses Hands-Free mode.
- Heart rate (AirPods Pro 3) shows your BPM from the AirPods sensors. Not a medical device.

- Microphone side: Automatic, Always Left or Always Right.
- Mic modes: Standard, Voice Isolation and Wide Spectrum. Pick one on the Home screen. Turn modes on or off and choose the model for each mode in WPods' Windows settings page > Mic modes. Each model shows how heavy it is on your PC and how much delay it adds.
- Voice enhancement: Off, Apple-inspired, Clear voice auto level or Clear voice full-range level. Applies to every pair.
Note
Mic modes are WPods' own processing, not Apple's. WPods runs open noise-suppression models on your PC and uses Apple's mode names for them.
All mic mode models
- Standard: GTCRN-vd 16k + HB gain (default), GTCRN 16k + HB passthrough.
- Voice Isolation: DPDFNet-8 48k (default), DPDFNet-8 48k 4 threads, DPDFNet-2 48k, NSNet2 48k, FastEnhancer-L/M/S/B/T 48k, DFN3 + residual filter.
- Wide Spectrum: WebRTC HPF + NS very high (default), Residual filter (Wiener), Raw (no processing).

For each pair (while connected):
- Disable Hands-Free mode keeps audio stereo. The mic comes through WPods instead. If you leave Hands-Free mode on, an app that uses the Hands-Free mic takes over the AirPods mic, and
Headset (A2DP, <AirPods name>)goes quiet until that app stops using it. On AirPods without the stereo mic, Hands-Free mode stays on by default, as it is their only mic. - Low audio latency keeps your AirPods' sound awake, so sounds play right away. It may use more battery.
- Low mic latency keeps the AirPods mic awake, so your mic is live the moment an app opens it. It shows when the mic comes through WPods. With HD voice, it keeps the voice link up, so sound stays mono the whole time. It may use more battery.
- HD voice (experimental), for AirPods without the stereo mic: WPods takes over Hands-Free for the pair and brings its mic to
Headset (HD, <AirPods name>)in the best voice codec the AirPods and your Bluetooth adapter manage (at least Windows' own Hands-Free quality), with mic modes and voice enhancement. Sound turns mono while an app uses the mic. Off by default.
For the app:
- Mic modes: turn modes on or off and pick a model for each.
- Mixer and Hotkeys (see below).
- Start with Windows (opens in the tray when you sign in).
- Theme: Light, Dark or Auto (Auto follows Windows).
- Language.
- Use Windows accent color.

- Hear your AirPods mic, another microphone or any other output in your AirPods, on top of Windows audio. Handy for checking how you sound, or for listening to a second device.
- Tick a device to add it and set its own volume.
- "Play ticked devices" turns them all off at once and keeps your picks for next time.
See the full hotkeys screen

- Set your own keys in WPods' Windows settings page > Hotkeys. They work in any app, even when WPods is in the tray.
- Noise control: next mode (the same modes as press and hold) or a key per mode. Press a mode's key again to go back to the mode you had before.
- Mic mode: next mode (the modes you turned on) or a key per mode.
- Turn on / Turn off: Mixer, Low audio latency, Low mic latency, Hands-Free mode, Conversation awareness, Hearing Aid and Media Assist. Give both the same key to switch with one press.
- Connect / Disconnect: connects your last used AirPods or disconnects the connected ones. Give both the same key to switch with one press.
- Show or hide WPods.
- Ready to use: Win+Alt+N switches noise control, Win+Alt+V switches mic modes and Win+Alt+L turns low mic latency on and off. Change or remove them any time.
- Click a key to change it, press Esc to cancel, and Backspace or the trash button to remove it. WPods warns you when two actions clash on one key, or when another app already uses it.
- A small notification shows each change. Mic modes and on/off switches also play a short sound. If you don't like it - turn the sounds off on the Hotkeys page.

- Closing the window keeps WPods in the tray. Tray menu: Open WPods, Start with Windows, Quit WPods.
- When your AirPods are near and connected to another device, a popup shows their picture, name and battery with Connect and Not now.
- Several pairs nearby? You get a "Connect AirPods?" list. Press Esc to dismiss.
- Nearby detection works after you connect your AirPods once.

On first launch, WPods shows a short welcome with the terms and a note that it isn't made by Apple. You can find the legal page in the app at any time.
Supports AirPods (1st, 2nd and 3rd gen), AirPods 4 and 4 (ANC), AirPods 5, AirPods Pro (1st gen), Pro 2 and Pro 3, and AirPods Max (1st gen) and Max 2. Battery works on all of them. Other features depend on the model:
- "Noise cancellation with one AirPod" works on AirPods 4 (ANC), AirPods 5 and all AirPods Pro.
- "Allow 'Off' in listening modes" works on AirPods Pro 2 and AirPods Pro 3.
- Hearing Aid and Media Assist work on AirPods Pro 2 and AirPods Pro 3.
- AirPods (1st gen) and AirPods (2nd gen) also support the microphone side setting.
- AirPods Max use head detection.
- The stereo mic (
Headset (A2DP, <AirPods name>)), mic modes and voice enhancement work on AirPods 4, AirPods 4 (ANC), AirPods 5, AirPods Pro 2, Pro 3 and AirPods Max 2. AirPods (1st, 2nd and 3rd gen), AirPods Pro (1st gen) and AirPods Max (1st gen) can't send their mic in stereo: it works through Windows' Hands-Free mode, or through WPods with HD voice (experimental), and sound turns mono while an app uses it.
WPods is free and stays free. If it's useful to you, you can support it on Ko-fi.
Donations buy test hardware first. A few models run different chips and firmware, and they are the ones with the most open issues, such as codecs like AAC-ELD. Fixing those needs the real hardware. They're funded one at a time, in this order:
| # | Model | Status |
|---|---|---|
| 1 | AirPods (1st gen) | Funding now |
| 2 | AirPods (2nd gen) | Queued |
| 3 | AirPods 5 | Queued |
| 4 | AirPods Max (1st gen) | Queued |
| 5 | AirPods Max 2 | Queued |
The current goal and its progress are on the Ko-fi page. Anything over a goal carries over to the next model, and once all five are bought, donations go to general development. Every purchase is posted with its receipt in Funding: test AirPods and receipts, along with a monthly summary of donations.
I'll buy these models myself either way - I want no one to feel obliged to donate - I am committed to supporting WPods. Donations just get them here sooner, which makes WPods better for everyone. And if you just want to use WPods, enjoy it: that's what it's for.
There are other projects for AirPods on Windows and beyond. Here is how they line up.
| Feature | WPods | NTPods (arctumn) | NTPods (Ripthulhu fork) | LibrePods | MagicPods |
|---|---|---|---|---|---|
| Platforms | Windows 10/11 | Windows 10/11 | Windows 11 | Android, Linux | Windows (+ Linux via Steam) |
| Price | Free | Free | Free | Free | Paid (trial) |
| Open source | Yes, GPL-3.0 | Yes, GPL-3.0 | Yes, GPL-3.0 | Yes, GPL-3.0 | No |
| Needs Test Mode | No | Yes | Only for optional drivers | No (Android: root on most devices) | Only for MagicAAP driver |
| Battery incl. case | Yes | Yes | Yes | Yes | Yes |
| Ear detection | Yes | Yes | Partial | Yes | Yes |
| Noise control incl. Adaptive | Yes | Yes | Yes | Yes | Yes (with MagicAAP) |
| Conversation awareness | Yes | Yes | Yes | Yes | Yes (with MagicAAP) |
| Personalized Volume | Yes | Yes | Yes | Yes (Android) | Yes (with MagicAAP) |
| Hearing Aid | Yes* | Experimental | Experimental | Partial (Android, needs root) | No |
| Heart rate | Yes (Pro 3) | Yes (Pro 3) | Yes | Experimental (Android) | No |
| Press-and-hold customization | Yes | No | Yes | Yes (Android) | Yes (with MagicAAP) |
| Stereo audio while mic is on | Yes | Yes | Yes | Experimental | No |
| Mic noise-suppression modes (choose model) | Yes | No | No | No | No |
| Voice enhancement | Yes | No | No | No | No |
| Low-latency mode | Yes | No | Yes | No | Yes |
| Nearby popup | Yes | Yes | Yes | Yes (Android) | Yes |
| Head gestures | No | No | No | Yes (Android) | No |
| Non-Apple earbuds | No | Partial (Beats) | Partial (Powerbeats Pro 2) | No | Yes (Beats, Galaxy Buds, Sony, more) |
* Tested on AirPods Pro 2 only so far. Needs hearing set up on an iPhone or iPad first. WPods turns Hearing Aid and Media Assist on and off; it doesn't change the hearing settings themselves. Tried it on other AirPods? Please open an issue.
Based on each project's README, website and source code as of 2026-10-26. If something is wrong, please open an issue.
- Windows 10 (version 2004 or later) or Windows 11, x64.
- Administrator rights to install.
- Internet during setup, if .NET 10 Desktop Runtime or Microsoft Edge WebView2 Runtime are missing. Setup downloads them and runs them only if they are signed by Microsoft.
- Intel Wi-Fi 6E AX211 (USB ID 8087:0033) - AirPods Pro 2 & 3 - tested by the maintainer
- Intel Wireless-AC 9460/9560 (USB ID 8087:0AAA) - AirPods Pro 2 - tested by @KarlTaok (report)
Thanks to everyone who provided adapter reports!
Other AirPods models and other Bluetooth adapters (Realtek, MediaTek, Qualcomm, Broadcom and others) are supported but haven't been tested yet. On some PCs the Bluetooth adapter is one part of a combined USB device. WPods supports these too, but they haven't been tested yet either.
Your adapter helps everyone. Every Bluetooth adapter is a little different, so please tell us how WPods works with yours, even if everything just works: send an adapter report. It takes two minutes and shows the next person that their adapter is safe to use.
- Your Bluetooth adapter: WPods' background service takes it over with WinUSB (built into Windows) and hands it back to Windows as a virtual adapter. Your Bluetooth devices keep working.
- usbip-win2: Setup silently installs these Microsoft-signed USB/IP drivers by Vadym Hrynchyshyn (BSD 2-Clause). They provide the virtual Bluetooth adapter and the WPods mic.
- Reversible: the adapter goes back to Windows' own driver when you uninstall WPods, and on its own if the takeover fails 3 times in 10 minutes.
- You do this at your own risk. WPods comes with no warranty.
Older versions of WPods needed Windows Test Mode and Secure Boot off. This version needs neither. Setup offers to turn Test Mode off and suggests turning Secure Boot back on. Have your BitLocker recovery key ready: Windows may ask for it after these changes.
- Download
WPods-Setup.exefrom the latest release. - Run it. Read and accept the terms. They explain the Bluetooth adapter takeover.
- Choose your options:
- Create a desktop shortcut (off by default).
- Start WPods when I sign in (on by default).
- Keep WPods up to date automatically (on by default).
- Setup installs .NET and WebView2 if missing, then WPods, its background service and usbip-win2. Restart if Setup asks you to.
- Open WPods and accept the terms on the welcome screen. Open your AirPods case near your PC (AirPods Max: take them out of the Smart Case) and click Connect. Not paired yet? Use "Pair new AirPods" or "Open Bluetooth settings".
If the install fails, run Setup again.
Updating: WPods keeps itself up to date. It checks for new versions, downloads them in the background and installs them the next time WPods starts. To update right away, click Update now when WPods shows a new version. You can turn automatic updates off in WPods' Windows settings page. Running a newer Setup by hand works too and keeps your choices.
- Open Windows Settings > Apps > Installed apps, find WPods and choose Uninstall.
- Choose whether to also remove your WPods settings (No by default). It then gives your Bluetooth adapter back to Windows' own driver and removes WPods and the startup entry.
WPods speaks 45 languages:
Arabic, Bangla, Bulgarian, Catalan, Chinese (Simplified; Traditional, Taiwan; Traditional, Hong Kong), Croatian, Czech, Danish, Dutch, English (US, UK, Australia, India), Finnish, French (France, Canada), German, Greek, Gujarati, Hebrew, Hindi, Hungarian, Indonesian, Italian, Japanese, Kannada, Kazakh, Korean, Lithuanian, Malay, Malayalam, Marathi, Norwegian Bokmal, Odia, Polish, Portuguese (Brazil, Portugal), Punjabi, Romanian, Slovak, Slovenian, Spanish (Spain, Latin America, US), Swedish, Tamil, Telugu, Thai, Turkish, Ukrainian, Urdu and Vietnamese.
Arabic, Hebrew and Urdu use a right-to-left layout. Translations other than English and Ukrainian were made with AI help and have not been reviewed by native speakers yet. Spotted something off? Please open an issue.
Choose "Same as Windows" or pick a language in WPods' Windows settings page. It switches right away.
Found a bug, have an idea, or something doesn't work with your AirPods? Please open an issue.
The issue form asks for a few details. They help us find the cause much faster, especially your Bluetooth adapter and the WPods logs.
How do I find my Bluetooth adapter?
- Right-click the Start button and choose Device Manager.
- Expand Bluetooth. Your adapter is the entry with a name like "Intel(R) Wireless Bluetooth(R)", "Realtek Bluetooth Adapter" or "MediaTek Bluetooth Adapter" (not your headphones or other devices).
- Right-click it > Properties > Details tab > choose Hardware Ids. Copy the first line, for example
USB\VID_8087&PID_0033&REV_0000.
Put the name and that line in your report.
How do I get the WPods logs?
WPods keeps two logs:
- The background service:
C:\ProgramData\WPods\logs - The app:
%LOCALAPPDATA%\WPods\logs(paste this into the File Explorer address bar)
Right-click each logs folder > Compress to ZIP file, then drag both zips into the issue. If they are bigger than 25 MB, upload them to OneDrive, Google Drive or similar and paste the link.
The logs contain the names and Bluetooth addresses of your devices. They never contain pairing keys, audio, or anything you type.
Which Windows version do I have?
Press Win+R, type winver and press Enter. Copy the version and build, for example "Version 24H2 (OS Build 26100.2605)".
Which WPods version do I have?
Open WPods' Windows settings page. The version is shown under Updates.
WPods is free software under the GPL-3.0 license. See LICENSE. Third-party components and their licenses are listed in THIRD-PARTY-NOTICES.txt. WPods is not made, affiliated with, sponsored, endorsed or supported by Apple Inc.
Apple, AirPods, AirPods Pro, AirPods Max, iPhone, iPad and Mac are trademarks of Apple Inc., registered in the U.S. and other countries. Feature names (Noise Cancellation, Transparency, Adaptive, Conversation Awareness, Personalized Volume, Hearing Assistance, Hearing Aid, Media Assist, Standard, Voice Isolation, Wide Spectrum) are Apple's names, used only to describe compatibility.
WPods is provided as is, without warranty of any kind. Heart rate is not a medical device and is not for medical use.
