Skip to content

Latest commit

 

History

History
75 lines (53 loc) · 3.8 KB

README.md

File metadata and controls

75 lines (53 loc) · 3.8 KB

Divimath SeekerHD Raspberry Pi Helper

Tools, configuration, and reference documentation for using the Divimath SeekerHD (Sony IMX462) camera with Raspberry Pi systems for low-latency HDMI and composite analog video.

This repository packages the working SeekerHD installer and documents the two intentional changes that make this setup different from a stock rpicam-apps installation:

  1. Full-frame DRM preview scaling - a small rpicam-apps C++ change that disables aspect-ratio letterboxing in the DRM preview path. This is required for full-width/anamorphic 16:9 composite output without black bars.
  2. SeekerHD IMX462 tuning profile - a custom libcamera tuning file optimized for low-light FPV video with a more aggressive low-light AGC ceiling and a shadow-lifting gamma curve.

The installer also configures the camera overlay, KMS/composite modes, PAL/NTSC frame pacing, HDMI modes, systemd auto-start, and optional USB Ethernet gadget mode.

Supported reference hardware

  • Raspberry Pi Zero 2 W
  • Raspberry Pi 3 Model A+ (most camera/video configuration applies; USB gadget support is intended for Zero-class OTG ports)
  • Divimath SeekerHD / IMX462 camera
  • Raspberry Pi OS 64-bit

Quick start

The ready-to-use package is under installer/.

For a new SD card:

  1. Flash Raspberry Pi OS (Lite) 64-bit with Raspberry Pi Imager.
    • Choose operating system > Raspeberry Pi OS (other) > Raspberry Pi OS Lite (64-bit)
  2. Configure user, Wi-Fi, SSH, and locale in Imager.
  3. Copy the contents of installer/ to the root of the boot partition before first boot.
  4. Edit seekerhd.conf if desired.
  5. Boot the Pi. The one-shot vendor-data installer configures SeekerHD and reboots once.

After initial installation, edit settings over SSH:

sudo nano /boot/firmware/seekerhd.conf
sudo bash /boot/firmware/Divimath-SeekerHD/install-update.sh
sudo reboot

Current video defaults

Output Render stream Camera rate Notes
PAL, 16:9 1024x576 50 fps Full sensor width, anamorphic fill
PAL, 4:3 crop 768x576 50 fps Crops left/right
NTSC, 16:9 854x480 59.94 fps Full sensor width, anamorphic fill
NTSC, 4:3 crop 640x480 59.94 fps Crops left/right
HDMI 720p 1280x720 60 fps Native 16:9
HDMI 1080p 1920x1080 30 fps default example Native 16:9

The sensor mode remains 1920x1080. The analog render stream is deliberately kept at the correct source aspect ratio before the DRM plane scales it to the PAL/NTSC raster.

Documentation

Upstream projects

SeekerHD uses Raspberry Pi's rpicam-apps, which is built on libcamera. The DRM preview modification in this repository applies to rpicam-apps; it does not modify libcamera itself.

The supplied rpicam-apps runtime is based on rpicam-apps v1.12.0. Source rebuilds should use the matching tag when reproducibility matters.

License

Divimath-authored scripts and documentation in this repository may be distributed under the repository license selected by Divimath. rpicam-apps source is BSD-2-Clause; preserve the upstream notice when redistributing modified binaries or source. See third_party/LICENSE-rpicam-apps.txt.