linux-qcom-6.18: update to tag qcom-6.18.y-20260403

Move to the latest qcom-6.18 tag qcom-6.18.y-20260403

Changelog:
FROMLIST: drm/bridge: lt9611uxc: reset edid_read on disconnect
QCLINUX: qcom.config: Enable compressed firmware support
PENDING: arm64: dts: qcom: Add EL2 support for Iris for monaco
FROMGIT: arm64: dts: qcom: hamoa-iot-evk: Enable UFS
FROMGIT: arm64: dts: qcom: hamoa: Add UFS nodes for x1e80100 SoC
FROMGIT: scsi: ufs: qcom,sc7180-ufshc: dt-bindings: Add UFSHC compatible for x1e80100
FROMGIT: dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: Add QMP UFS PHY compatible
FROMLIST: arm64: dts: qcom: hamoa: Add EL2 overlay for hamoa-evk
FROMLIST: arm64: dts: qcom: hamoa-iot-evk: support Bluetooth over both USB and UART
FROMGIT: arm64: dts: qcom: hamoa-iot-evk: Update TSENS thermal zone configuration
FROMLIST: arm64: dts: qcom: hamoa-iot-evk-camera-imx577: Add DT overlay
FROMGIT: arm64: dts: qcom: Add base PURWA-IOT-EVK board
FROMGIT: arm64: dts: qcom: Add PURWA-IOT-SOM platform
FROMGIT: firmware: qcom: scm: Allow QSEECOM on PURWA-IOT-EVK
FROMGIT: dt-bindings: arm: qcom: Document PURWA-IOT-EVK board
FROMGIT: arm64: dts: qcom: rename x1p42100 to purwa
FROMGIT: arm64: dts: qcom: Add PCIe3 and PCIe5 regulators for HAMAO-IOT-EVK board
FROMGIT: arm64: dts: qcom: Add PCIe3 and PCIe5 support for HAMOA-IOT-SOM platform
FROMGIT: arm64: dts: qcom: hamoa: Move PHY, PERST, and Wake GPIOs to PCIe port nodes and add port Nodes for all PCIe ports
FROMGIT: arm64: dts: qcom: hamoa-iot-evk: Add backlight support for eDP panel
FROMGIT: arm64: dts: qcom: hamoa-iot-evk: enable PWM RG LEDs
FROMGIT: arm64: dts: qcom: hamoa-iot-evk: Add WLAN node for Hamoa IoT EVK board
FROMGIT: arm64: dts: qcom: hamoa-iot-evk: Add vbus regulator support for Type-A ports
FROMGIT: arm64: dts: qcom: hamoa-iot-evk: Fix 4-speaker playback support
FROMGIT: arm64: dts: qcom: x1e80100-asus-zenbook-a14: Enable WiFi, Bluetooth
FROMGIT: arm64: dts: qcom: Rework X1-based Asus Zenbook A14's displays
FROMGIT: dt-bindings: arm: qcom: Add Asus Zenbook A14 UX3407QA LCD/OLED variants
Revert "FROMLIST: arm64: dts: qcom: Add backlight support for eDP panel"
Revert "FROMLIST: arm64: dts: qcom: Add PCIe3 and PCIe5 support for HAMOA-IOT-SOM platform"
Revert "FROMLIST: arm64: dts: qcom: Add PCIe3 and PCIe5 regulators for HAMAO-IOT-EVK board"
Revert "PENDING: arch: arm64: Enable UFS on x1e80100 SoC"
Revert "arm64: dts: qcom: qcs6490-rb3gen2: Adjust tsens thermal zone"
WORKAROUND: Bluetooth: support Bluetooth over both USB and UART
Revert "PENDING: arch: arm64: Enable UFS on HAMOA-IOT-EVK board"
Revert "FROMLIST: arm64: dts: qcom: hamoa-iot-evk: Add vbus regulator support for Type-A ports"
Revert "FROMLIST: arm64: dts: qcom: hamoa-iot-evk: Add WLAN node for hamoa iot evk board"
Revert "FROMLIST: arm64: dts: qcom: hamoa-iot-evk-camera-imx577: Add DT overlay"
Revert "FROMLIST: arm64: dts: qcom: hamoa-iot-evk: Update TSENS thermal zone configuration"
Revert "FROMLIST: arm64: dts: qcom: hamoa-iot-evk: support Bluetooth over both USB and UART"
FROMLIST: remoteproc: qcom: pas: Drop unused dtb_mem_region field
FROMLIST: remoteproc: qcom: pas: Map/unmap subsystem region before auth_and_reset
FROMLIST: remoteproc: qcom: pas: Fix the dtb PAS context creation
FROMLIST: arm64: dts: qcom: qcs615-ride: enable QSPI and NOR flash
FROMLIST: arm64: dts: qcom: talos: Add QSPI support
FROMLIST: spi: spi-qcom-qspi: Add interconnect support for memory path
FROMLIST: spi: dt-bindings: qcom-qspi: Add QCS615 compatible
FROMLIST: arm64: dts: qcom: talos: Add psci reboot-modes
FROMLIST: coresight: platform: check the availability of the endpoint before parse
QCLINUX: arm64: dts: qcom: monaco: Add CamX EL2 overlay
FROMGIT: Bluetooth: hci_qca: Enable HFP hardware offload for WCN6855 and WCN7850
FROMGIT: Bluetooth: hci_qca: Refactor HFP hardware offload capability handling
FROMLIST: arm64: dts: qcom: qcs6490-rb3gen2-industrial-mezzanine: Disable WCN6750 and WPSS
FROMLIST: driver: bluetooth:btusb: Allow firmware re-download when version matches

Signed-off-by: Salendarsingh Gaud <sgaud@qti.qualcomm.com>

Author: sgaud-quic

recipes-kernel/linux/linux-qcom_6.18.bb

@@ -14,8 +14,8 @@ PV = "${LINUX_VERSION}"
 
 FILESEXTRAPATHS:prepend := "${THISDIR}/linux-qcom-6.18:"
 
-# tag:qcom-6.18.y-20260325
-SRCREV ?= "064f7053ecc0cf4c28d8f58e3a703ca74518edfc"
+# tag:qcom-6.18.y-20260403
+SRCREV ?= "7ea01f6a3cff61f8e0535e6b018695d54d38202a"
 
 SRCBRANCH ?= "nobranch=1"
 SRCBRANCH:class-devupstream ?= "branch=qcom-6.18.y"