FROMLIST: arm64: dts: qcom: talos-evk-camera: Add DT overlay

Enable IMX577 via CCI on Taloss EVK Core Kit.

The Talos EVK board does not include a camera sensor
by default, this DTSO has enabled the Arducam 12.3MP
IMX577 Mini Camera Module on the CSI-1 interface.

Link: https://lore.kernel.org/all/20260122-sm6150_evk-v5-5-039b170450a3@oss.qualcomm.com/
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>

Author: wenmliu

arch/arm64/boot/dts/qcom/Makefile

@@ -365,8 +365,11 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-qrd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8750-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8750-qrd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= talos-evk.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= talos-evk-camera-imx577.dtbo
+talos-evk-camera-imx577-dtbs	:= talos-evk.dtb talos-evk-camera-imx577.dtbo
 talos-evk-lvds-auo,g133han01-dtbs	:= \
 	talos-evk.dtb talos-evk-lvds-auo,g133han01.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= talos-evk-camera-imx577.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= talos-evk-lvds-auo,g133han01.dtb
 x1e001de-devkit-el2-dtbs	:= x1e001de-devkit.dtb x1-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= x1e001de-devkit.dtb x1e001de-devkit-el2.dtb

arch/arm64/boot/dts/qcom/talos-evk-camera-imx577.dtso

@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/qcom,qcs615-camcc.h>
+#include <dt-bindings/gpio/gpio.h>
+
+&camss {
+	vdd-csiphy-1p2-supply = <&vreg_l11a>;
+	vdd-csiphy-1p8-supply = <&vreg_l12a>;
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			csiphy1_ep: endpoint {
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&imx577_ep1>;
+			};
+		};
+	};
+};
+
+&cci {
+	status = "okay";
+};
+
+&cci_i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	camera@1a {
+		compatible = "sony,imx577";
+		reg = <0x1a>;
+
+		reset-gpios = <&tlmm 29 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&cam2_default>;
+		pinctrl-names = "default";
+
+		clocks = <&camcc CAM_CC_MCLK2_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
+		assigned-clock-rates = <24000000>;
+
+		avdd-supply = <&vreg_s4a>;
+
+		port {
+			imx577_ep1: endpoint {
+				link-frequencies = /bits/ 64 <600000000>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csiphy1_ep>;
+			};
+		};
+	};
+};