FROMLIST: arm64: dts: qcom: sc7280: Add WSA SoundWire and LPASS support

Add WSA LPASS macro Codec along with SoundWire controller.

Co-developed-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/linux-arm-msm/20250527111227.2318021-4-quic_pkumpatl@quicinc.com/
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>

Author: mohsRafi

arch/arm64/boot/dts/qcom/sc7280.dtsi

@@ -2636,6 +2636,66 @@
 			status = "disabled";
 		};
 
+		lpass_wsa_macro: codec@3240000 {
+			compatible = "qcom,sc7280-lpass-wsa-macro";
+			reg = <0x0 0x03240000 0x0 0x1000>;
+
+			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
+				 <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
+				 <&lpass_va_macro>;
+			clock-names = "mclk",
+				      "npl",
+				      "fsgen";
+
+			pinctrl-0 = <&lpass_wsa_swr_clk>, <&lpass_wsa_swr_data>;
+			pinctrl-names = "default";
+
+			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
+					<&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+			power-domain-names = "macro", "dcodec";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+
+			status = "disabled";
+		};
+
+		swr2: soundwire@3250000 {
+			compatible = "qcom,soundwire-v1.6.0";
+			reg = <0x0 0x03250000 0x0 0x2000>;
+
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsa_macro>;
+			clock-names = "iface";
+
+			resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>;
+			reset-names = "swr_audio_cgcr";
+
+			qcom,din-ports = <2>;
+			qcom,dout-ports = <6>;
+
+			qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07
+								0x1f 0x3f 0x0f 0x0f>;
+			qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+			qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+			qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01
+							       0xff 0xff>;
+			qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff
+								0xff 0xff>;
+			qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff
+							    0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+
+			status = "disabled";
+		};
+
 		lpass_audiocc: clock-controller@3300000 {
 			compatible = "qcom,sc7280-lpassaudiocc";
 			reg = <0 0x03300000 0 0x30000>,
@@ -2839,6 +2899,22 @@
 				pins = "gpio1", "gpio2", "gpio14";
 				function = "swr_tx_data";
 			};
+
+			lpass_wsa_swr_clk: wsa-swr-clk-state {
+				pins = "gpio10";
+				function = "wsa_swr_clk";
+				drive-strength = <2>;
+				slew-rate = <1>;
+				bias-disable;
+			};
+
+			lpass_wsa_swr_data: wsa-swr-data-state {
+				pins = "gpio11";
+				function = "wsa_swr_data";
+				drive-strength = <2>;
+				slew-rate = <1>;
+				bias-bus-hold;
+			};
 		};
 
 		gpu: gpu@3d00000 {