Merge tag 'arm-soc-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

torvalds · torvalds · commit 32db9f10d52c · 2020-03-27T13:52:32.000-07:00
Pull ARM DT and driver fixes from Arnd Bergmann:
 "For the devicetree files, there are a total of 20 patches, almost
  entirely for 32-bit machines:

   - The Allwinner/sun9i r40 SoC dtsi file contains a number of issues,
     both for correctness and for style that are addressed in separate
     patches. This causes most of the changed lines of the DT updates
     this time.

   - More Allwinner updates fixing the identification of the security
     system on sun8i/A33, a recent regression of the A83t ethernet, and
     a few board specific issues on the TBS-A711 macine.

   - Several bug fixes for OMAP dts files, most notably fixing the
     timings for the NAND flash on the Nokia N900 that regressed a while
     ago after the move to configuring them from DT. Some other OMAPs
     now set the correct dma limits on the L3 bus, and a regression fix
     addresses lost Ethernet on dm814x

   - One incorrect setting in the newly added Raspberry Pi Zero W that
     may cause issues with the SD card controller.

   - A missing property on the bcm2835 firmware node caused incorrect
     DMA settings.

   - An old bug on the oxnas platform causing spurious interrupts is
     finally addressed.

   - A regression on the Exynos Midas board broke the OLED panel power
     supply.

   - The i.MX6 phycore SoM specified the wrong voltage for the SoC, this
     is now set to the values from the datasheet.

   - Some 64-bit machines use a deprecated string to identify the PSCI
     firmware.

  There are also several small code fixes addressing mostly serious
  issues:

   - Fix the sunxi rsb bus access to no longer return incorrect data
     when mixing 8 and 16 bit I/O.

   - Fix a suspend/resume regression on the OMAP2+ lcdc from a missing
     quirk in the ti-sysc driver

   - Fix a NULL pointer access from a race in the fsl dpio driver

   - Fix a v5.5 regression in the exynos-chipid driver that caused an
     invalid error code probing the device on non-exynos platforms

   - Fix an out-of-bounds access in the AMD TEE driver"

* tag 'arm-soc-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  soc: samsung: chipid: Fix return value on non-Exynos platforms
  arm64: dts: Fix leftover entry-methods for PSCI
  ARM: dts: exynos: Fix regulator node aliasing on Midas-based boards
  ARM: dts: oxnas: Fix clear-mask property
  ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations
  ARM: dts: omap5: Add bus_dma_limit for L3 bus
  ARM: dts: omap4-droid4: Fix lost touchscreen interrupts
  ARM: dts: dra7: Add bus_dma_limit for L3 bus
  ARM: bcm2835-rpi-zero-w: Add missing pinctrl name
  ARM: dts: sun8i: a33: add the new SS compatible
  dt-bindings: crypto: add new compatible for A33 SS
  ARM: dts: sun8i: r40: Move SPI device nodes based on address order
  ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3
  ARM: dts: sun8i: r40: Move AHCI device node based on address order
  ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage
  soc: fsl: dpio: register dpio irq handlers after dpio create
  tee: amdtee: out of bounds read in find_session()
  ARM: dts: N900: fix onenand timings
  bus: ti-sysc: Fix quirk flags for lcdc on am335x
  ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode
  ...
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
@@ -23,6 +23,8 @@ properties:
       - items:
         - const: allwinner,sun7i-a20-crypto
         - const: allwinner,sun4i-a10-crypto
+      - items:
+        - const: allwinner,sun8i-a33-crypto
 
   reg:
     maxItems: 1
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -112,6 +112,7 @@
 &sdhci {
 	#address-cells = <1>;
 	#size-cells = <0>;
+	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
 	bus-width = <4>;
 	mmc-pwrseq = <&wifi_pwrseq>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -15,6 +15,7 @@
 		firmware: firmware {
 			compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
 			mboxes = <&mailbox>;
+			dma-ranges;
 		};
 
 		power: power {
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
@@ -24,12 +24,12 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &davinci_mdio {
diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
@@ -33,12 +33,12 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &davinci_mdio {
diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
@@ -24,12 +24,12 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &davinci_mdio {
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
@@ -148,6 +148,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x0 0xc0000000>;
+		dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
 		ti,hwmods = "l3_main_1", "l3_main_2";
 		reg = <0x0 0x44000000 0x0 0x1000000>,
 		      <0x0 0x45000000 0x0 0x1000>;
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -33,7 +33,7 @@
 		};
 	};
 
-	lcd_vdd3_reg: voltage-regulator-6 {
+	lcd_vdd3_reg: voltage-regulator-7 {
 		compatible = "regulator-fixed";
 		regulator-name = "LCD_VDD_2.2V";
 		regulator-min-microvolt = <2200000>;
@@ -42,7 +42,7 @@
 		enable-active-high;
 	};
 
-	ps_als_reg: voltage-regulator-7 {
+	ps_als_reg: voltage-regulator-8 {
 		compatible = "regulator-fixed";
 		regulator-name = "LED_A_3.0V";
 		regulator-min-microvolt = <3000000>;
diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts
@@ -13,7 +13,7 @@
 
 	/* bootargs are passed in by bootloader */
 
-	cam_vdda_reg: voltage-regulator-6 {
+	cam_vdda_reg: voltage-regulator-7 {
 		compatible = "regulator-fixed";
 		regulator-name = "CAM_SENSOR_CORE_1.2V";
 		regulator-min-microvolt = <1200000>;
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -112,15 +112,15 @@
 		regulators {
 			vdd_arm: buck1 {
 				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <730000>;
+				regulator-min-microvolt = <925000>;
 				regulator-max-microvolt = <1380000>;
 				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
 				regulator-always-on;
 			};
 
 			vdd_soc: buck2 {
 				regulator-name = "vdd_soc";
-				regulator-min-microvolt = <730000>;
+				regulator-min-microvolt = <1150000>;
 				regulator-max-microvolt = <1380000>;
 				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
 				regulator-always-on;
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -429,7 +429,7 @@
 		reset-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio173 */
 
 		/* gpio_183 with sys_nirq2 pad as wakeup */
-		interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING>,
+		interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
 				      <&omap4_pmx_core 0x160>;
 		interrupt-names = "irq", "wakeup";
 		wakeup-source;
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
@@ -854,34 +854,46 @@
 		compatible = "ti,omap2-onenand";
 		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
 
+		/*
+		 * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported
+		 * bootloader set values when booted with v5.1
+		 * (OneNAND Manufacturer: Samsung):
+		 *
+		 *   cs0 GPMC_CS_CONFIG1: 0xfb001202
+		 *   cs0 GPMC_CS_CONFIG2: 0x00111100
+		 *   cs0 GPMC_CS_CONFIG3: 0x00020200
+		 *   cs0 GPMC_CS_CONFIG4: 0x11001102
+		 *   cs0 GPMC_CS_CONFIG5: 0x03101616
+		 *   cs0 GPMC_CS_CONFIG6: 0x90060000
+		 */
 		gpmc,sync-read;
 		gpmc,sync-write;
 		gpmc,burst-length = <16>;
 		gpmc,burst-read;
 		gpmc,burst-wrap;
 		gpmc,burst-write;
-		gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
-		gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
+		gpmc,device-width = <2>;
+		gpmc,mux-add-data = <2>;
 		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <87>;
-		gpmc,cs-wr-off-ns = <87>;
+		gpmc,cs-rd-off-ns = <102>;
+		gpmc,cs-wr-off-ns = <102>;
 		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <10>;
-		gpmc,adv-wr-off-ns = <10>;
-		gpmc,oe-on-ns = <15>;
-		gpmc,oe-off-ns = <87>;
+		gpmc,adv-rd-off-ns = <12>;
+		gpmc,adv-wr-off-ns = <12>;
+		gpmc,oe-on-ns = <12>;
+		gpmc,oe-off-ns = <102>;
 		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <87>;
-		gpmc,rd-cycle-ns = <112>;
-		gpmc,wr-cycle-ns = <112>;
-		gpmc,access-ns = <81>;
-		gpmc,page-burst-access-ns = <15>;
+		gpmc,we-off-ns = <102>;
+		gpmc,rd-cycle-ns = <132>;
+		gpmc,wr-cycle-ns = <132>;
+		gpmc,access-ns = <96>;
+		gpmc,page-burst-access-ns = <18>;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <5>;
-		gpmc,wr-data-mux-bus-ns = <30>;
-		gpmc,wr-access-ns = <81>;
+		gpmc,clk-activation-ns = <6>;
+		gpmc,wr-data-mux-bus-ns = <36>;
+		gpmc,wr-access-ns = <96>;
 		gpmc,sync-clk-ps = <15000>;
 
 		/*
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
@@ -143,6 +143,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0 0 0xc0000000>;
+		dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
 		reg = <0 0x44000000 0 0x2000>,
 		      <0 0x44800000 0 0x3000>,
diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi
@@ -323,8 +323,8 @@
 					interrupt-controller;
 					reg = <0 0x200>;
 					#interrupt-cells = <1>;
-					valid-mask = <0xFFFFFFFF>;
-					clear-mask = <0>;
+					valid-mask = <0xffffffff>;
+					clear-mask = <0xffffffff>;
 				};
 
 				timer0: timer@200 {
diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi
@@ -240,8 +240,8 @@
 					reg = <0 0x200>;
 					interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 					#interrupt-cells = <1>;
-					valid-mask = <0xFFFFFFFF>;
-					clear-mask = <0>;
+					valid-mask = <0xffffffff>;
+					clear-mask = <0xffffffff>;
 				};
 
 				timer0: timer@200 {
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -215,7 +215,7 @@
 		};
 
 		crypto: crypto-engine@1c15000 {
-			compatible = "allwinner,sun4i-a10-crypto";
+			compatible = "allwinner,sun8i-a33-crypto";
 			reg = <0x01c15000 0x1000>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -374,8 +374,8 @@
 };
 
 &reg_dldo3 {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
 	regulator-name = "vdd-csi";
 };
 
@@ -498,7 +498,8 @@
 };
 
 &usbphy {
-	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	usb0_id_det-gpios = <&pio 7 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_vmain>;
 	usb2_vbus-supply = <&reg_vmain>;
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -1006,10 +1006,10 @@
 			reg = <0x01c30000 0x104>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
-			resets = <&ccu CLK_BUS_EMAC>;
-			reset-names = "stmmaceth";
-			clocks = <&ccu RST_BUS_EMAC>;
+			clocks = <&ccu CLK_BUS_EMAC>;
 			clock-names = "stmmaceth";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
 			status = "disabled";
 
 			mdio: mdio {
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
diff --git a/arch/arm64/boot/dts/sprd/sc9863a.dtsi b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
diff --git a/drivers/soc/fsl/dpio/dpio-driver.c b/drivers/soc/fsl/dpio/dpio-driver.c
diff --git a/drivers/soc/samsung/exynos-chipid.c b/drivers/soc/samsung/exynos-chipid.c
diff --git a/drivers/tee/amdtee/core.c b/drivers/tee/amdtee/core.c
