Merge tag 'arc-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:

 - Fix __ALIGN_STR and __ALIGN to not use default junk padding

 - Misc Kconfig cleanups, header updates

* tag 'arc-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: define __ALIGN_STR and __ALIGN symbols for ARC
  ARC: show_regs: reduce lines of output
  ARC: Replace <linux/clk-provider.h> by <linux/of_clk.h>
  ARC: fpu: fix randconfig build error reported by 0-day test service
  ARC: fix some Kconfig typos
  ARC: Cleanup old Kconfig IO scheduler options

Author: torvalds

arch/arc/Kconfig

@@ -154,7 +154,7 @@ config ARC_CPU_HS
 	help
 	  Support for ARC HS38x Cores based on ARCv2 ISA
 	  The notable features are:
-	    - SMP configurations of upto 4 core with coherency
+	    - SMP configurations of up to 4 cores with coherency
 	    - Optional L2 Cache and IO-Coherency
 	    - Revised Interrupt Architecture (multiple priorites, reg banks,
 	        auto stack switch, auto regfile save/restore)
@@ -192,7 +192,7 @@ config ARC_SMP_HALT_ON_RESET
 	help
 	  In SMP configuration cores can be configured as Halt-on-reset
 	  or they could all start at same time. For Halt-on-reset, non
-	  masters are parked until Master kicks them so they can start of
+	  masters are parked until Master kicks them so they can start off
 	  at designated entry point. For other case, all jump to common
 	  entry point and spin wait for Master's signal.
 

arch/arc/configs/nps_defconfig

@@ -21,8 +21,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARC_PLAT_EZNPS=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4096

arch/arc/configs/nsimosci_defconfig

@@ -20,8 +20,6 @@ CONFIG_ISA_ARCOMPACT=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci"
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y

arch/arc/configs/nsimosci_hs_defconfig

@@ -19,8 +19,6 @@ CONFIG_PERF_EVENTS=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_ISA_ARCV2=y
 CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs"
 # CONFIG_COMPACTION is not set

arch/arc/configs/nsimosci_hs_smp_defconfig

@@ -14,8 +14,6 @@ CONFIG_PERF_EVENTS=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
 # CONFIG_ARC_TIMERS_64BIT is not set

arch/arc/include/asm/fpu.h

@@ -43,6 +43,8 @@ extern void fpu_init_task(struct pt_regs *regs);
 
 #endif	/* !CONFIG_ISA_ARCOMPACT */
 
+struct task_struct;
+
 extern void fpu_save_restore(struct task_struct *p, struct task_struct *n);
 
 #else	/* !CONFIG_ARC_FPU_SAVE_RESTORE */

arch/arc/include/asm/linkage.h

@@ -29,6 +29,8 @@
 .endm
 
 #define ASM_NL		 `	/* use '`' to mark new line in macro */
+#define __ALIGN		.align 4
+#define __ALIGN_STR	__stringify(__ALIGN)
 
 /* annotation for data we want in DCCM - if enabled in .config */
 .macro ARCFP_DATA nm

arch/arc/kernel/setup.c

@@ -8,11 +8,11 @@
 #include <linux/delay.h>
 #include <linux/root_dev.h>
 #include <linux/clk.h>
-#include <linux/clk-provider.h>
 #include <linux/clocksource.h>
 #include <linux/console.h>
 #include <linux/module.h>
 #include <linux/cpu.h>
+#include <linux/of_clk.h>
 #include <linux/of_fdt.h>
 #include <linux/of.h>
 #include <linux/cache.h>

arch/arc/kernel/troubleshoot.c

@@ -104,8 +104,7 @@ static void show_faulting_vma(unsigned long address)
 			if (IS_ERR(nm))
 				nm = "?";
 		}
-		pr_info("    @off 0x%lx in [%s]\n"
-			"    VMA: 0x%08lx to 0x%08lx\n",
+		pr_info("  @off 0x%lx in [%s]  VMA: 0x%08lx to 0x%08lx\n",
 			vma->vm_start < TASK_UNMAPPED_BASE ?
 				address : address - vma->vm_start,
 			nm, vma->vm_start, vma->vm_end);
@@ -120,8 +119,6 @@ static void show_ecr_verbose(struct pt_regs *regs)
 	unsigned int vec, cause_code;
 	unsigned long address;
 
-	pr_info("\n[ECR   ]: 0x%08lx => ", regs->event);
-
 	/* For Data fault, this is data address not instruction addr */
 	address = current->thread.fault_address;
 
@@ -130,10 +127,10 @@ static void show_ecr_verbose(struct pt_regs *regs)
 
 	/* For DTLB Miss or ProtV, display the memory involved too */
 	if (vec == ECR_V_DTLB_MISS) {
-		pr_cont("Invalid %s @ 0x%08lx by insn @ 0x%08lx\n",
+		pr_cont("Invalid %s @ 0x%08lx by insn @ %pS\n",
 		       (cause_code == 0x01) ? "Read" :
 		       ((cause_code == 0x02) ? "Write" : "EX"),
-		       address, regs->ret);
+		       address, (void *)regs->ret);
 	} else if (vec == ECR_V_ITLB_MISS) {
 		pr_cont("Insn could not be fetched\n");
 	} else if (vec == ECR_V_MACH_CHK) {
@@ -191,31 +188,31 @@ void show_regs(struct pt_regs *regs)
 
 	show_ecr_verbose(regs);
 
-	pr_info("[EFA   ]: 0x%08lx\n[BLINK ]: %pS\n[ERET  ]: %pS\n",
-		current->thread.fault_address,
-		(void *)regs->blink, (void *)regs->ret);
-
 	if (user_mode(regs))
 		show_faulting_vma(regs->ret); /* faulting code, not data */
 
-	pr_info("[STAT32]: 0x%08lx", regs->status32);
+	pr_info("ECR: 0x%08lx EFA: 0x%08lx ERET: 0x%08lx\n",
+		regs->event, current->thread.fault_address, regs->ret);
+
+	pr_info("STAT32: 0x%08lx", regs->status32);
 
 #define STS_BIT(r, bit)	r->status32 & STATUS_##bit##_MASK ? #bit" " : ""
 
 #ifdef CONFIG_ISA_ARCOMPACT
-	pr_cont(" : %2s%2s%2s%2s%2s%2s%2s\n",
+	pr_cont(" [%2s%2s%2s%2s%2s%2s%2s]",
 			(regs->status32 & STATUS_U_MASK) ? "U " : "K ",
 			STS_BIT(regs, DE), STS_BIT(regs, AE),
 			STS_BIT(regs, A2), STS_BIT(regs, A1),
 			STS_BIT(regs, E2), STS_BIT(regs, E1));
 #else
-	pr_cont(" : %2s%2s%2s%2s\n",
+	pr_cont(" [%2s%2s%2s%2s]",
 			STS_BIT(regs, IE),
 			(regs->status32 & STATUS_U_MASK) ? "U " : "K ",
 			STS_BIT(regs, DE), STS_BIT(regs, AE));
 #endif
-	pr_info("BTA: 0x%08lx\t SP: 0x%08lx\t FP: 0x%08lx\n",
-		regs->bta, regs->sp, regs->fp);
+	pr_cont("  BTA: 0x%08lx\n", regs->bta);
+	pr_info("BLK: %pS\n SP: 0x%08lx  FP: 0x%08lx\n",
+		(void *)regs->blink, regs->sp, regs->fp);
 	pr_info("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n",
 	       regs->lp_start, regs->lp_end, regs->lp_count);