r8152: sync ocp base

commit b24edca upstream.

There are some chances that the actual base of hardware is different
from the value recorded by driver, so we have to reset the variable
of ocp_base to sync it.

Set ocp_base to -1. Then, it would be updated and the new base would be
set to the hardware next time.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Author: hayesorz

drivers/net/usb/r8152.c

@@ -32,7 +32,7 @@
 #define NETNEXT_VERSION		"12"
 
 /* Information for net */
-#define NET_VERSION		"11"
+#define NET_VERSION		"12"
 
 #define DRIVER_VERSION		"v1." NETNEXT_VERSION "." NET_VERSION
 #define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
@@ -4016,6 +4016,11 @@ static void rtl_clear_bp(struct r8152 *tp, u16 type)
 	ocp_write_word(tp, type, PLA_BP_BA, 0);
 }
 
+static inline void rtl_reset_ocp_base(struct r8152 *tp)
+{
+	tp->ocp_base = -1;
+}
+
 static int rtl_phy_patch_request(struct r8152 *tp, bool request, bool wait)
 {
 	u16 data, check;
@@ -4087,8 +4092,6 @@ static int rtl_post_ram_code(struct r8152 *tp, u16 key_addr, bool wait)
 
 	rtl_phy_patch_request(tp, false, wait);
 
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base);
-
 	return 0;
 }
 
@@ -4800,6 +4803,8 @@ static void rtl_ram_code_speed_up(struct r8152 *tp, struct fw_phy_speed_up *phy,
 	u32 len;
 	u8 *data;
 
+	rtl_reset_ocp_base(tp);
+
 	if (sram_read(tp, SRAM_GPHY_FW_VER) >= __le16_to_cpu(phy->version)) {
 		dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n");
 		return;
@@ -4845,7 +4850,8 @@ static void rtl_ram_code_speed_up(struct r8152 *tp, struct fw_phy_speed_up *phy,
 		}
 	}
 
-	ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base);
+	rtl_reset_ocp_base(tp);
+
 	rtl_phy_patch_request(tp, false, wait);
 
 	if (sram_read(tp, SRAM_GPHY_FW_VER) == __le16_to_cpu(phy->version))
@@ -4861,6 +4867,8 @@ static int rtl8152_fw_phy_ver(struct r8152 *tp, struct fw_phy_ver *phy_ver)
 	ver_addr = __le16_to_cpu(phy_ver->ver.addr);
 	ver = __le16_to_cpu(phy_ver->ver.data);
 
+	rtl_reset_ocp_base(tp);
+
 	if (sram_read(tp, ver_addr) >= ver) {
 		dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n");
 		return 0;
@@ -4877,6 +4885,8 @@ static void rtl8152_fw_phy_fixup(struct r8152 *tp, struct fw_phy_fixup *fix)
 {
 	u16 addr, data;
 
+	rtl_reset_ocp_base(tp);
+
 	addr = __le16_to_cpu(fix->setting.addr);
 	data = ocp_reg_read(tp, addr);
 
@@ -4908,6 +4918,8 @@ static void rtl8152_fw_phy_union_apply(struct r8152 *tp, struct fw_phy_union *ph
 	u32 length;
 	int i, num;
 
+	rtl_reset_ocp_base(tp);
+
 	num = phy->pre_num;
 	for (i = 0; i < num; i++)
 		sram_write(tp, __le16_to_cpu(phy->pre_set[i].addr),
@@ -4938,6 +4950,8 @@ static void rtl8152_fw_phy_nc_apply(struct r8152 *tp, struct fw_phy_nc *phy)
 	u32 length, i, num;
 	__le16 *data;
 
+	rtl_reset_ocp_base(tp);
+
 	mode_reg = __le16_to_cpu(phy->mode_reg);
 	sram_write(tp, mode_reg, __le16_to_cpu(phy->mode_pre));
 	sram_write(tp, __le16_to_cpu(phy->ba_reg),
@@ -5107,6 +5121,7 @@ static void rtl8152_apply_firmware(struct r8152 *tp, bool power_cut)
 	if (rtl_fw->post_fw)
 		rtl_fw->post_fw(tp);
 
+	rtl_reset_ocp_base(tp);
 	strscpy(rtl_fw->version, fw_hdr->version, RTL_VER_SIZE);
 	dev_info(&tp->intf->dev, "load %s successfully\n", rtl_fw->version);
 }
@@ -8484,6 +8499,8 @@ static int rtl8152_resume(struct usb_interface *intf)
 
 	mutex_lock(&tp->control);
 
+	rtl_reset_ocp_base(tp);
+
 	if (test_bit(SELECTIVE_SUSPEND, &tp->flags))
 		ret = rtl8152_runtime_resume(tp);
 	else
@@ -8499,6 +8516,7 @@ static int rtl8152_reset_resume(struct usb_interface *intf)
 	struct r8152 *tp = usb_get_intfdata(intf);
 
 	clear_bit(SELECTIVE_SUSPEND, &tp->flags);
+	rtl_reset_ocp_base(tp);
 	tp->rtl_ops.init(tp);
 	queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
 	set_ethernet_addr(tp, true);