iio: adc: at91-sama5d2_adc: add startup and tracktim as parameter for at91_adc_setup_samp_freq()

Add startup and tracktim as parameter for at91_adc_setup_samp_freq()
function. In case of temperature sensor being enabled these parameters
will be configured on temperature read request to improve the accuracy
of the read temperature.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>

Author: claudiubeznea

drivers/iio/adc/at91-sama5d2_adc.c

@@ -1435,25 +1435,27 @@ static unsigned at91_adc_startup_time(unsigned startup_time_min,
 	return i;
 }
 
-static void at91_adc_setup_samp_freq(struct iio_dev *indio_dev, unsigned freq)
+static void at91_adc_setup_samp_freq(struct iio_dev *indio_dev, unsigned freq,
+				     unsigned int startup_time,
+				     unsigned int tracktim)
 {
 	struct at91_adc_state *st = iio_priv(indio_dev);
 	unsigned f_per, prescal, startup, mr;
 
 	f_per = clk_get_rate(st->per_clk);
 	prescal = (f_per / (2 * freq)) - 1;
 
-	startup = at91_adc_startup_time(st->soc_info.startup_time,
-					freq / 1000);
+	startup = at91_adc_startup_time(startup_time, freq / 1000);
 
 	mr = at91_adc_readl(st, MR);
 	mr &= ~(AT91_SAMA5D2_MR_STARTUP_MASK | AT91_SAMA5D2_MR_PRESCAL_MASK);
 	mr |= AT91_SAMA5D2_MR_STARTUP(startup);
 	mr |= AT91_SAMA5D2_MR_PRESCAL(prescal);
+	mr |= AT91_SAMA5D2_MR_TRACKTIM(tracktim);
 	at91_adc_writel(st, MR, mr);
 
-	dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n",
-		freq, startup, prescal);
+	dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u, tracktim=%u\n",
+		freq, startup, prescal, tracktim);
 	st->current_sample_rate = freq;
 }
 
@@ -1713,7 +1715,8 @@ static int at91_adc_write_raw(struct iio_dev *indio_dev,
 			return -EINVAL;
 
 		mutex_lock(&st->lock);
-		at91_adc_setup_samp_freq(indio_dev, val);
+		at91_adc_setup_samp_freq(indio_dev, val,
+					 st->soc_info.startup_time, 0);
 		mutex_unlock(&st->lock);
 		return 0;
 	default:
@@ -1876,7 +1879,8 @@ static void at91_adc_hw_init(struct iio_dev *indio_dev)
 	at91_adc_writel(st, MR,
 			AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH);
 
-	at91_adc_setup_samp_freq(indio_dev, st->soc_info.min_sample_rate);
+	at91_adc_setup_samp_freq(indio_dev, st->soc_info.min_sample_rate,
+				 st->soc_info.startup_time, 0);
 
 	/* configure extended mode register */
 	at91_adc_config_emr(st, st->oversampling_ratio, 0);