ARM: dts: at91: sam9x60ek: enable CAN mux & CAN Transceivers

Set the mux to use CAN and enable CAN Transceivers.

Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>

Author: cristibirsan

arch/arm/boot/dts/at91-sam9x60ek.dts

@@ -584,15 +584,19 @@
 					pinctrl_can0_rx_tx: can0_rx_tx {
 						atmel,pins =
 							<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0 */
-							 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* CANTX0 */
+							 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX0 */
+							 AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN	/* Enable CAN0 mux */
+							 AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
 					};
 				};
 
 				can1 {
 					pinctrl_can1_rx_tx: can1_rx_tx {
 						atmel,pins =
 							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1 RXD1 */
-							 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* CANTX1 TXD1 */
+							 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX1 TXD1 */
+							 AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN	/* Enable CAN1 mux */
+							 AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
 					};
 				};