regulator: mt6315: add regulator supplies

Chen-Yu Tsai <wenst@chromium.org> says:

This series is part of a broader collection of regulator related
cleanups for MediaTek Chromebooks. This one covers the MT6315 PMIC.

Patch 1 adds the names of the power supply inputs to the binding.

Patch 2 adds the supply names from the DT binding change in patch 1
to the regulator descriptions in the driver. This patch has a
checkpatch.pl warnings, but I wonder if it's because the context size
for checking complex macros is not large enough.

Device tree changes will be sent separately. The goal is to get the
regulator tree as complete as possible. This includes adding supply
names to other regulator DT bindings, and adding all the supply links
to the existing DTs.

Author: broonie

.mailmap

@@ -316,6 +316,7 @@ Hans Verkuil <hverkuil@kernel.org> <hverkuil-cisco@xs4all.nl>
 Hans Verkuil <hverkuil@kernel.org> <hansverk@cisco.com>
 Hao Ge <hao.ge@linux.dev> <gehao@kylinos.cn>
 Harry Yoo <harry.yoo@oracle.com> <42.hyeyoo@gmail.com>
+Harry Yoo <harry@kernel.org> <harry.yoo@oracle.com>
 Heiko Carstens <hca@linux.ibm.com> <h.carstens@de.ibm.com>
 Heiko Carstens <hca@linux.ibm.com> <heiko.carstens@de.ibm.com>
 Heiko Stuebner <heiko@sntech.de> <heiko.stuebner@bqreaders.com>
@@ -587,6 +588,7 @@ Morten Welinder <terra@gnome.org>
 Morten Welinder <welinder@anemone.rentec.com>
 Morten Welinder <welinder@darter.rentec.com>
 Morten Welinder <welinder@troll.com>
+Muhammad Usama Anjum <usama.anjum@arm.com> <usama.anjum@collabora.com>
 Mukesh Ojha <quic_mojha@quicinc.com> <mojha@codeaurora.org>
 Muna Sinada <quic_msinada@quicinc.com> <msinada@codeaurora.org>
 Murali Nalajala <quic_mnalajal@quicinc.com> <mnalajal@codeaurora.org>

Documentation/PCI/pcieaer-howto.rst

@@ -85,6 +85,16 @@ In the example, 'Requester ID' means the ID of the device that sent
 the error message to the Root Port. Please refer to PCIe specs for other
 fields.
 
+The 'TLP Header' is the prefix/header of the TLP that caused the error
+in raw hex format. To decode the TLP Header into human-readable form
+one may use tlp-tool:
+
+https://github.com/mmpg-x86/tlp-tool
+
+Example usage::
+
+  curl -L https://git.kernel.org/linus/2ca1c94ce0b6 | rtlp-tool --aer
+
 AER Ratelimits
 --------------
 

Documentation/core-api/dma-attributes.rst

@@ -149,11 +149,33 @@ For architectures that require cache flushing for DMA coherence
 DMA_ATTR_MMIO will not perform any cache flushing. The address
 provided must never be mapped cacheable into the CPU.
 
-DMA_ATTR_CPU_CACHE_CLEAN
-------------------------
-
-This attribute indicates the CPU will not dirty any cacheline overlapping this
-DMA_FROM_DEVICE/DMA_BIDIRECTIONAL buffer while it is mapped. This allows
-multiple small buffers to safely share a cacheline without risk of data
-corruption, suppressing DMA debug warnings about overlapping mappings.
-All mappings sharing a cacheline should have this attribute.
+DMA_ATTR_DEBUGGING_IGNORE_CACHELINES
+------------------------------------
+
+This attribute indicates that CPU cache lines may overlap for buffers mapped
+with DMA_FROM_DEVICE or DMA_BIDIRECTIONAL.
+
+Such overlap may occur when callers map multiple small buffers that reside
+within the same cache line. In this case, callers must guarantee that the CPU
+will not dirty these cache lines after the mappings are established. When this
+condition is met, multiple buffers can safely share a cache line without risking
+data corruption.
+
+All mappings that share a cache line must set this attribute to suppress DMA
+debug warnings about overlapping mappings.
+
+DMA_ATTR_REQUIRE_COHERENT
+-------------------------
+
+DMA mapping requests with the DMA_ATTR_REQUIRE_COHERENT fail on any
+system where SWIOTLB or cache management is required. This should only
+be used to support uAPI designs that require continuous HW DMA
+coherence with userspace processes, for example RDMA and DRM. At a
+minimum the memory being mapped must be userspace memory from
+pin_user_pages() or similar.
+
+Drivers should consider using dma_mmap_pages() instead of this
+interface when building their uAPIs, when possible.
+
+It must never be used in an in-kernel driver that only works with
+kernel memory.

Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml

@@ -25,6 +25,15 @@ properties:
   reg:
     maxItems: 1
 
+  pvdd1-supply:
+    description: Supply for regulator vbuck1
+  pvdd2-supply:
+    description: Supply for regulator vbuck2
+  pvdd3-supply:
+    description: Supply for regulator vbuck3
+  pvdd4-supply:
+    description: Supply for regulator vbuck4
+
   regulators:
     type: object
     description: List of regulators and its properties
@@ -49,8 +58,11 @@ examples:
     pmic@6 {
       compatible = "mediatek,mt6315-regulator";
       reg = <0x6 0>;
+      pvdd1-supply = <&pp4200_z2>;
+      pvdd3-supply = <&pp4200_z2>;
 
       regulators {
+
         vbuck1 {
           regulator-min-microvolt = <300000>;
           regulator-max-microvolt = <1193750>;

Documentation/devicetree/bindings/sound/rockchip-spdif.yaml

@@ -33,6 +33,7 @@ properties:
           - const: rockchip,rk3066-spdif
       - items:
           - enum:
+              - rockchip,rk3576-spdif
               - rockchip,rk3588-spdif
           - const: rockchip,rk3568-spdif
 

Documentation/devicetree/bindings/sound/st,stm32-sai.yaml

@@ -164,7 +164,7 @@ allOf:
       properties:
         compatible:
           contains:
-            const: st,stm32mph7-sai
+            const: st,stm32h7-sai
     then:
       properties:
         clocks:

Documentation/filesystems/overlayfs.rst

@@ -783,6 +783,56 @@ controlled by the "uuid" mount option, which supports these values:
     mounted with "uuid=on".
 
 
+Durability and copy up
+----------------------
+
+The fsync(2) system call ensures that the data and metadata of a file
+are safely written to the backing storage, which is expected to
+guarantee the existence of the information post system crash.
+
+Without an fsync(2) call, there is no guarantee that the observed
+data after a system crash will be either the old or the new data, but
+in practice, the observed data after crash is often the old or new data
+or a mix of both.
+
+When an overlayfs file is modified for the first time, copy up will
+create a copy of the lower file and its parent directories in the upper
+layer.  Since the Linux filesystem API does not enforce any particular
+ordering on storing changes without explicit fsync(2) calls, in case
+of a system crash, the upper file could end up with no data at all
+(i.e. zeros), which would be an unusual outcome.  To avoid this
+experience, overlayfs calls fsync(2) on the upper file before completing
+data copy up with rename(2) or link(2) to make the copy up "atomic".
+
+By default, overlayfs does not explicitly call fsync(2) on copied up
+directories or on metadata-only copy up, so it provides no guarantee to
+persist the user's modification unless the user calls fsync(2).
+The fsync during copy up only guarantees that if a copy up is observed
+after a crash, the observed data is not zeroes or intermediate values
+from the copy up staging area.
+
+On traditional local filesystems with a single journal (e.g. ext4, xfs),
+fsync on a file also persists the parent directory changes, because they
+are usually modified in the same transaction, so metadata durability during
+data copy up effectively comes for free.  Overlayfs further limits risk by
+disallowing network filesystems as upper layer.
+
+Overlayfs can be tuned to prefer performance or durability when storing
+to the underlying upper layer.  This is controlled by the "fsync" mount
+option, which supports these values:
+
+- "auto": (default)
+    Call fsync(2) on upper file before completion of data copy up.
+    No explicit fsync(2) on directory or metadata-only copy up.
+- "strict":
+    Call fsync(2) on upper file and directories before completion of any
+    copy up.
+- "volatile": [*]
+    Prefer performance over durability (see `Volatile mount`_)
+
+[*] The mount option "volatile" is an alias to "fsync=volatile".
+
+
 Volatile mount
 --------------
 

Documentation/hwmon/adm1177.rst

@@ -27,10 +27,10 @@ for details.
 Sysfs entries
 -------------
 
-The following attributes are supported. Current maxim attribute
+The following attributes are supported. Current maximum attribute
 is read-write, all other attributes are read-only.
 
-in0_input		Measured voltage in microvolts.
+in0_input		Measured voltage in millivolts.
 
-curr1_input		Measured current in microamperes.
-curr1_max_alarm		Overcurrent alarm in microamperes.
+curr1_input		Measured current in milliamperes.
+curr1_max		Overcurrent shutdown threshold in milliamperes.

Documentation/hwmon/peci-cputemp.rst

@@ -51,8 +51,9 @@ temp1_max		Provides thermal control temperature of the CPU package
 temp1_crit		Provides shutdown temperature of the CPU package which
 			is also known as the maximum processor junction
 			temperature, Tjmax or Tprochot.
-temp1_crit_hyst		Provides the hysteresis value from Tcontrol to Tjmax of
-			the CPU package.
+temp1_crit_hyst		Provides the hysteresis temperature of the CPU
+			package. Returns Tcontrol, the temperature at which
+			the critical condition clears.
 
 temp2_label		"DTS"
 temp2_input		Provides current temperature of the CPU package scaled
@@ -62,8 +63,9 @@ temp2_max		Provides thermal control temperature of the CPU package
 temp2_crit		Provides shutdown temperature of the CPU package which
 			is also known as the maximum processor junction
 			temperature, Tjmax or Tprochot.
-temp2_crit_hyst		Provides the hysteresis value from Tcontrol to Tjmax of
-			the CPU package.
+temp2_crit_hyst		Provides the hysteresis temperature of the CPU
+			package. Returns Tcontrol, the temperature at which
+			the critical condition clears.
 
 temp3_label		"Tcontrol"
 temp3_input		Provides current Tcontrol temperature of the CPU

Documentation/userspace-api/landlock.rst

@@ -8,7 +8,7 @@ Landlock: unprivileged access control
 =====================================
 
 :Author: Mickaël Salaün
-:Date: January 2026
+:Date: March 2026
 
 The goal of Landlock is to enable restriction of ambient rights (e.g. global
 filesystem or network access) for a set of processes.  Because Landlock
@@ -197,12 +197,27 @@ similar backwards compatibility check is needed for the restrict flags
 
 .. code-block:: c
 
-    __u32 restrict_flags = LANDLOCK_RESTRICT_SELF_LOG_NEW_EXEC_ON;
-    if (abi < 7) {
-        /* Clear logging flags unsupported before ABI 7. */
+    __u32 restrict_flags =
+        LANDLOCK_RESTRICT_SELF_LOG_NEW_EXEC_ON |
+        LANDLOCK_RESTRICT_SELF_TSYNC;
+    switch (abi) {
+    case 1 ... 6:
+        /* Removes logging flags for ABI < 7 */
         restrict_flags &= ~(LANDLOCK_RESTRICT_SELF_LOG_SAME_EXEC_OFF |
                             LANDLOCK_RESTRICT_SELF_LOG_NEW_EXEC_ON |
                             LANDLOCK_RESTRICT_SELF_LOG_SUBDOMAINS_OFF);
+        __attribute__((fallthrough));
+    case 7:
+        /*
+         * Removes multithreaded enforcement flag for ABI < 8
+         *
+         * WARNING: Without this flag, calling landlock_restrict_self(2) is
+         * only equivalent if the calling process is single-threaded. Below
+         * ABI v8 (and as of ABI v8, when not using this flag), a Landlock
+         * policy would only be enforced for the calling thread and its
+         * children (and not for all threads, including parents and siblings).
+         */
+        restrict_flags &= ~LANDLOCK_RESTRICT_SELF_TSYNC;
     }
 
 The next step is to restrict the current thread from gaining more privileges