python-app.yml

name: Python CI

on:
  push:
    branches: [ "master", "main" ]
  # No base-branch filter, deliberately. A pull request that targets another
  # branch is the bottom half of a stack, and it is the half that still has to
  # be reviewed and merged: with `branches` set to main it arrived with four
  # checks instead of the thirty this workflow runs, and the gates only spoke
  # once it was already at the front of the queue.
  #
  # This does not double any run. The `push` trigger above is limited to the
  # two trunk branches, so a commit on a working branch fires `pull_request`
  # alone and a commit on main fires `push` alone. The two jobs that care which
  # one it was, `sonar` and `pr-comment`, key on `github.event_name` rather
  # than on the base, so they behave for a stacked pull request exactly as they
  # do for any other.
  pull_request:
  workflow_dispatch:

permissions:
  contents: read

jobs:
  quality:
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
    # A conflict resolved carelessly during a rebase can leave markers behind in
    # a file no other gate reads. CHANGELOG.md is the usual victim: it collides
    # on every parallel branch and nothing lints it, so the markers ride a fully
    # green pull request all the way to main. Only the opening and closing
    # markers are matched, never a bare row of "=", because that is legitimate
    # Markdown (a setext heading underline).
    - name: Check for merge-conflict markers
      run: |
        if git grep -nE '^(<{7} |>{7} )' -- . ; then
          echo "::error::Unresolved merge-conflict markers found in the files listed above."
          exit 1
        fi
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
        cache: 'pip'
    - name: Install dependencies
      run: |
        python -m pip install --upgrade pip
        pip install -r requirements.txt
        pip install -r requirements-dev.txt
        pip install -e .
    # The clips are the one committed asset CI never regenerates: an FDTD run
    # plus four video encodes each is far too slow for a pull request, and the
    # encoders are not bit-reproducible anyway. So nothing could tell that the
    # code drawing a clip had moved since the clip was written, and twelve of
    # them shipped an ASCII hyphen in their Spanish tick labels for months
    # after that was repaired, with every gate green. Each render stamps a
    # fingerprint of the code that drew it; this recomputes the fingerprints
    # from the sources and names any clip whose one has moved. It parses the
    # figure package rather than importing it, so it needs no rendering stack
    # and runs in seconds. The clips themselves live in
    # jmrplens/phonometry-assets, so "is every file there" is answered from
    # the tree of the commit assets.lock records: a blobless fetch of that one
    # commit is a few hundred kilobytes, where the clips are a third of a
    # gigabyte, and the check only ever needed the names.
    - name: Fetch the names of the published clips, without the clips
      run: |
        git init -q assets-tree
        git -C assets-tree remote add origin https://github.com/jmrplens/phonometry-assets.git
        git -C assets-tree fetch -q --depth 1 --filter=blob:none origin "$(cat assets.lock)"
        git -C assets-tree ls-tree -r --name-only FETCH_HEAD images/ > assets-manifest.txt
        echo "$(wc -l < assets-manifest.txt) clip files published at $(cut -c1-12 assets.lock)"
    - name: Check every published clip matches the code that draws it
      run: python scripts/check_animation_freshness.py --manifest assets-manifest.txt
    - name: Lint with Ruff
      run: ruff check .
    # Ruff is also the formatter. Before this step the tree had no formatter at
    # all and 673 of its 812 Python files disagreed with any single style; the
    # gate is what keeps that from happening again. Markdown is excluded in
    # `[tool.ruff]`, so this never touches the documentation snippets.
    - name: Check formatting with Ruff
      run: ruff format --check .
    # `stub/src` is in this list because it was in no path list at all. The
    # PyOctaveBand transition shim lives outside the package this repository
    # installs, so nothing here ever imported or type checked it, and two
    # defects reached its published page that way. Ruff walks the tree from
    # `.` and has always reached the shim; mypy takes the paths it is given,
    # and this one was never among them. `tests/static_typing` holds what
    # only a type checker can see, such as a published catalogue joined with
    # a caller's being accepted by a lookup's `catalogue=`: the suite runs
    # those files, but a wrong annotation passes at run time.
    - name: Type check with Mypy
      run: mypy src scripts stub/src tests/static_typing
    - name: Security check with Bandit
      run: bandit -r src

  # The PyOctaveBand transition stub under stub/ is built from the tree by a
  # workflow_dispatch publish job, so until now the first time anything looked
  # at it was the moment it went to PyPI: a README that named the wrong
  # warning class and a dependency line with no ceiling were both discovered
  # after they had shipped. Building it on every pull request costs seconds
  # and moves `twine check` (which is what renders the long description and
  # would reject a malformed one) to where a mistake is still cheap.
  transition-stub:
    name: Transition stub builds and its metadata is sound
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
    - name: Build the stub and check its long description
      run: |
        python -m pip install --upgrade pip build twine
        python -m build stub/
        twine check stub/dist/*
    # The resolver reads the built metadata, not stub/pyproject.toml, so the
    # cap that keeps `pip install -U PyOctaveBand` on the line whose API the
    # shim re-exports is asserted where it will actually be enforced.
    - name: Fail if the built metadata does not cap phonometry below the next major
      run: python scripts/check_stub_metadata.py

  # Fast gate (runtime deps only, no pytest): the committed
  # docs/conformance.json, the docs/CONFORMANCE.md rendered from it, and every
  # count quoted from either must equal a fresh `make conformance` run.
  conformance:
    name: Conformance report up to date
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
        cache: 'pip'
    - name: Install runtime dependencies
      run: |
        python -m pip install --upgrade pip
        pip install -r requirements.txt
        pip install -e .
    - name: Regenerate the conformance artefact, the report and the quoted counts
      run: make conformance
    # `make conformance` now writes as well as reads: it regenerates the report
    # and rewrites the counts quoted in .zenodo.json, the docs/ mirror and the
    # site frontmatter. So the staleness gate has to cover the whole tree, not
    # just the report. Diffing only docs/CONFORMANCE.md would let the rewrite
    # fix the prose in the runner's checkout and pass, while the branch keeps
    # the stale numbers.
    - name: Fail if the committed report or any quoted count is stale
      run: |
        # --porcelain rather than `git diff`, because a diff is blind to an
        # untracked file and the artefact is one of the things this regenerates.
        # docs/conformance.json arrived untracked once and the job went green
        # while a fresh checkout could not build the site at all.
        if [ -n "$(git status --porcelain)" ]; then
          git status --porcelain
          git diff
          echo "::error::The conformance artefact, the report or a count quoted from either is out of date, or a generated file is untracked - run 'make conformance' and commit the result."
          exit 1
        fi
    # Belt and braces, and the command to run locally: the read-only check on
    # the committed state. The report can be current while the prose quoting it
    # is not; the counts were typed out in three places and two of them fell a
    # release behind.
    - name: Fail if any page quotes a stale conformance count
      run: python scripts/check_conformance_claims.py
    # The artefact is committed, so it can be wrong in ways a regeneration
    # diff cannot see: a count that no longer matches its rows, a numpy scalar
    # where a float belongs, a citation whose split no longer rebuilds it, a
    # dead line in the override ratchet. This reads what is committed and says
    # which one.
    - name: Fail if the committed artefact is not internally consistent
      run: python scripts/check_conformance_artifact.py
    # The artefact's closed vocabularies are restated by the site: once in the
    # Zod schema that validates it into the content collection, once in the
    # label maps that word a verdict and a relation in each language. Nothing
    # compared them until this, and a relation added to the reader and missing
    # from the schema stopped the site build with a content error naming ten
    # checks and no cause. Cheap and stdlib-only, so it runs here rather than
    # waiting for the docs workflow to build the site.
    - name: Fail if the site does not accept and word every vocabulary
      run: python scripts/check_conformance_vocabulary.py

  # Drift gate for the generated Starlight API reference: the committed pages
  # under site/src/content/docs/reference/api and the sidebar fragment must
  # equal a fresh `make api-docs` run (deterministic, stdlib-only generator).
  api-docs:
    name: Generated API reference up to date
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
        cache: 'pip'
    - name: Install runtime dependencies
      run: |
        python -m pip install --upgrade pip
        pip install -r requirements.txt
        pip install -e .
    - name: Regenerate the API reference
      run: make api-docs
    - name: Fail if the committed API reference is stale
      run: |
        if ! git diff --exit-code -- site/src/content/docs/reference/api site/src/generated; then
          echo "::error::The generated API reference is out of date - run 'make api-docs' and commit the result."
          exit 1
        fi
        untracked=$(git ls-files --others --exclude-standard -- site/src/content/docs/reference/api site/src/generated)
        if [ -n "$untracked" ]; then
          echo "::error::Generated API pages are not committed:"
          echo "$untracked"
          exit 1
        fi

  # Drift gate for the llms artifacts: the committed llms.txt, llms-full.txt,
  # the shards under site/public/llms and the generated overview mirrors under
  # docs/ must equal a fresh `make llms` run. Every other generated artifact
  # had this gate; these were regenerated by the docs workflow and never
  # compared, so a stale commit could not be told from a fresh one.
  llms:
    name: llms artifacts up to date
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
    - name: Regenerate the llms artifacts
      run: make llms
    - name: Fail if the committed artifacts are stale
      run: |
        if ! git diff --exit-code -- llms.txt llms-full.txt site/public/llms docs; then
          echo "::error::The llms artifacts are out of date - run 'make llms' and commit the result."
          exit 1
        fi
        untracked=$(git ls-files --others --exclude-standard -- site/public/llms docs)
        if [ -n "$untracked" ]; then
          echo "::error::Generated llms files are not committed:"
          echo "$untracked"
          exit 1
        fi

  # Drift gate for the evidence pages the site renders from docs/: the body of
  # docs/ERRATA.md is transplanted into the two reference/errata pages (EN +
  # ES), so the site can never show a hand-copied or stale version of it. The
  # conformance pages are no longer transplanted - they render from
  # docs/conformance.json through src/components/Conformance.astro, which the
  # `conformance` job gates instead.
  site-reports:
    name: Generated evidence pages up to date
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
    # Stdlib-only generator: no project install needed, it only reshapes text.
    - name: Check the transplanted errata pages
      run: python scripts/generate_site_reports.py --check

  # Evidence gate for docs/ERRATA.md. Each entry there is a permanent public
  # statement that a named body or author printed something wrong, so it must
  # cite the page it quotes rather than an extraction: PDF text layers delete
  # radicals and minus signs silently, and one entry was drafted on an
  # extraction that had eaten a square root, and caught in review. The script
  # flags any multiplicative claim whose ratio sits on sqrt(2), sqrt(3), pi,
  # 2 pi, 1/sqrt(2), ln 2 or a small integer, which is the signature of a lost
  # glyph. See scripts/check_errata_evidence.py and CONTRIBUTING.md.
  errata-evidence:
    name: Errata entries cite their page
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
    # Stdlib-only checker: it reads docs/ERRATA.md and nothing else.
    - name: Check the errata evidence
      run: python scripts/check_errata_evidence.py

  # The Python fences of a page form one sequential example: a later fence may
  # use names an earlier fence defined, never the reverse. One shipped page
  # used names its own figure block defined further down, while a same-named
  # variable from a different room sat in scope, so reading top to bottom gave
  # numbers that were not the annotated ones. Reader-owned placeholders (the
  # reader's measurement, never invented by the page) are registered in the
  # script. See scripts/check_fence_names.py and CONTRIBUTING.md.
  fence-names:
    name: Documentation fences read in order
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
    # Stdlib-only checker: it parses the fences and imports nothing else.
    - name: Check the fence reading order
      run: python scripts/check_fence_names.py

  # Coverage gate for the curated quick table in docs/reference/api/index.md: every
  # phonometry.__all__ name must have a table row (extra rows such as methods
  # or namespace entries are fine). See scripts/check_api_reference.py.
  api-reference-table:
    name: Curated API quick table covers __all__
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
        cache: 'pip'
    - name: Install runtime dependencies
      run: |
        python -m pip install --upgrade pip
        pip install -r requirements.txt
        pip install -e .
    - name: Check docs/reference/api/index.md coverage
      run: python scripts/check_api_reference.py

  # A pressure of 101 325 and a pressure of 101.325 are both legitimate values
  # here: the ISO 3740 family prints kilopascals, IEC 61094-2 and ISO 15186-3
  # print pascals, and the result of the mix-up is still a float. No guard by
  # magnitude can separate them, because either reading is a real duty
  # somewhere else in the tree, so the unit lives in the parameter name and
  # this holds it there. It walks the imported package rather than the source
  # tree, because ReportMetadata is published from the root and defined in a
  # private module, and a scan by file path does not see it.
  parameter-units:
    name: Every public quantity names its unit
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
        cache: 'pip'
    - name: Install runtime dependencies
      run: |
        python -m pip install --upgrade pip
        pip install -r requirements.txt
        pip install -e .
    - name: Check that no pressure, temperature or humidity hides its unit
      run: python scripts/check_parameter_units.py

  # A published table is shared by every caller in the process, so a dict
  # behind a `Mapping` annotation, or a writeable array, lets one caller change
  # a printed number for everyone after it without anything raising. This holds
  # every value reachable from a public name to immutable containers all the
  # way down. It walks the imported package, like parameter-units, because a
  # table built by a function call only shows its type once it exists.
  frozen-constants:
    name: Every published table refuses writes
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
        cache: 'pip'
    - name: Install runtime dependencies
      run: |
        python -m pip install --upgrade pip
        pip install -r requirements.txt
        pip install -e .
    - name: Check that no published constant can be changed in place
      run: python scripts/check_frozen_constants.py

  # A value transcribed from a book is only checkable if the next reader can
  # open the same page. The convention lived in review until a table came to
  # cite a folio its page does not print and another attributed to a table two
  # columns it does not carry. This holds every published record that carries a
  # `source` to the grammar the errata registry uses, and every table
  # transcribed from a book or a paper to a banner naming both its PDF page and
  # its printed folio; a standard stays outside, because it numbers its own
  # clauses and tables and is cited by that number. It walks the imported
  # package, like the units guard, and re-runs its own census over the banners
  # so a table from a new book fails until it is registered.
  published-sources:
    name: Every published value names its page
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
        cache: 'pip'
    - name: Install runtime dependencies
      run: |
        python -m pip install --upgrade pip
        pip install -r requirements.txt
        pip install -e .
    - name: Check that every published value cites its page and folio
      run: python scripts/check_published_sources.py
    - name: Check that every published catalogue reaches the catalogues page
      run: python scripts/check_published_catalogues_reach_the_page.py
    # The site renders the catalogues from a module this dumps, so a row added
    # to a data file without regenerating it would leave the page showing the
    # catalogue as it was. Same arrangement as the API reference: the artefact
    # is committed and CI checks it against a fresh run.
    - name: Check the catalogue data the site renders
      run: python scripts/generate_catalogue_data.py --check
    # The JSON Schema of a catalogue file is written from the row classes, so
    # a field added to one would be missing from every editor that completes
    # a catalogue file until the published schema is written again.
    - name: Check the catalogue schema the site publishes
      run: python scripts/generate_catalogue_schema.py --check

  # The solids catalogue's point is that a published value is worth more beside
  # another published value than alone, and four books print the same material.
  # Two densities that disagree are a digit somebody typed wrong, because every
  # density the script does not already accept agrees across these tables to
  # within 2,6 per cent, so it fails above 8 per cent and lets anything under
  # that pass without a word. Moduli and speeds disagree by thirty per cent
  # between books without anybody being wrong, so those it reports and never
  # fails; the ones it reports by default are the few an order of magnitude
  # apart, which is how tin's twelvefold modulus surfaced. It walks the
  # imported package, like the units and sources guards.
  solid-agreement:
    name: The books agree about the solids they share
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
        cache: 'pip'
    - name: Install runtime dependencies
      run: |
        python -m pip install --upgrade pip
        pip install -r requirements.txt
        pip install -e .
    - name: Check that the books agree about the solids they share
      run: python scripts/check_solid_agreement.py
    # The same idea over every catalogue: two books that credit one study for
    # one material are two readings of one measurement, and a pair that does
    # not overlap is a misread page rather than a disagreement.
    - name: Check the rows two books took from the same place
      run: python scripts/check_shared_sources.py

  # The committed documentation figures (.github/images) must match a fresh
  # `make graphs` run. The rendering + compute stack is pinned in
  # requirements-figures.txt so SVG *structure* (elements, text, colours) and
  # WebP dimensions/encoding are stable -- matplotlib/fonttools/pillow fix the
  # layout, numpy/scipy fix the computed data. The pin is also load-bearing
  # for the diagram plates' baked glyph outlines (scripts/diagrams/outline.py
  # shapes them through the wheel's FT2Font/libraqm and DejaVu faces): a wheel
  # bump rewrites every glyph in all 592 plate files and is reviewed as its
  # own regeneration. The comparison itself (scripts/check_figures.py) is
  # tolerance-aware rather than a byte diff: GitHub's heterogeneous runner
  # CPUs shift a few path coordinates ~1 ULP, which is visually irrelevant but
  # breaks a byte compare. Bump the pinned stack together with a fresh
  # `make graphs` regeneration.
  figures:
    name: Documentation figures up to date
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
        cache: 'pip'
    - name: Install the locked figure-rendering stack
      run: |
        python -m pip install --upgrade pip
        pip install -e .
        # Pin the render+compute stack last so it wins over looser deps.
        pip install -r requirements-figures.txt
    - name: Fail if any label's mathematics does not parse
      # Before the regeneration, not after: an unparseable label aborts the
      # generation, and this names the file and line instead of leaving a
      # traceback in the middle of a four-hundred-figure run. Reads the
      # sources, so it costs seconds and covers labels no figure exercises.
      run: python scripts/check_mathtext.py
    - name: Fail if a Spanish label would keep an English decimal point
      # The one defect the language gate structurally cannot see: it compares
      # untranslated WORDS, and a number is not a word. Static, so it needs no
      # generation run.
      run: python scripts/check_decimal_comma.py
    - name: Regenerate figures and diagrams
      run: make graphs
    - name: Regenerate the plates again and demand identical bytes
      # The diagram plates bake their labels to glyph outlines and must be
      # bit-deterministic: two runs in the same job have to agree byte for
      # byte, which is stronger than the tolerance gate below and catches an
      # accidentally unordered collection in the glyph store the moment it
      # appears.
      run: |
        mkdir /tmp/plates-first-run
        cp .github/images/diagram_*.svg .github/images/sound_power_methods*.svg /tmp/plates-first-run/
        python scripts/generate_diagrams.py
        for f in /tmp/plates-first-run/*.svg; do
          cmp "$f" ".github/images/$(basename "$f")"
        done
    - name: Fail if any committed figure is stale
      # Tolerance-aware compare instead of a byte diff: GitHub's runner fleet is
      # hardware-heterogeneous, so the pinned stack computes a few path
      # coordinates ~1 ULP apart depending on the CPU the run lands on. That
      # sub-pixel drift is irrelevant but breaks a byte diff; the script checks
      # SVG structure + numeric tolerance and raster RMS instead, so real figure
      # changes still fail while cross-CPU noise passes. See scripts/check_figures.py.
      run: python scripts/check_figures.py
    - name: Fail if any shaded region is illegible
      # Staleness says the figures match the code; it says nothing about
      # whether a shaded region can be seen. This measures every filled area
      # against the page it is drawn on and fails below the CIEDE2000
      # threshold, which is what catches a fill tuned on one theme and left
      # invisible on the other. It parses the committed SVGs (a few seconds
      # for the whole set) and needs no rendering stack of its own.
      run: python scripts/check_figure_contrast.py
    - name: Check every line can be seen on the dark page
      # The step above measures filled areas. A stroke is not a fill, and the
      # ISO 3745 microphone array shipped with its hemisphere drawn in a
      # half-opacity grey hairline that composited to 1.3:1 on the dark theme:
      # present in the SVG, invisible to a reader, and green on every gate.
      # This blends each stroke with its own opacity over the dark page and
      # holds hairlines to 3:1 and thicker lines to 2:1, with the grid and axis
      # furniture exempt because they are drawn to recede.
      run: python scripts/check_stroke_contrast.py
    - name: Check the Spanish figures are in Spanish
      # The Spanish variant of a figure is the English one with its strings
      # looked up in a table at save time, so a string nobody added to the
      # table ships in English inside `X_es.svg` while every other gate stays
      # green: the page is Spanish, the i18n parity gate sees a translated
      # page, this job sees a figure that matches its generator, and the
      # figure is in English. That is how roughly two hundred of them reached
      # the tree. The lookup itself writes down what it could not translate,
      # during the `make graphs` above (no second render, and it cannot change
      # a rendered byte), and this fails on any untranslated string the
      # committed baseline does not already record -- and on a baseline line
      # that has been paid off and not deleted.
      run: python scripts/check_figure_language.py
    - name: Fail if an annotation on a figure cannot be read
      # Two ways a label fails the reader, and nothing else can see either. A
      # label across a curve and given no backing is hard to read: the strokes
      # of the letters and of the curve are the same weight, and on the dark
      # page close to the same lightness. A label something is drawn over is
      # not there at all. The figure matches its generator, the contrast steps
      # above measure fills and strokes rather than what overlaps what, and
      # `svg.fonttype = "path"` means the committed file has no text node to
      # find the label in -- so the measurement has to happen while the
      # matplotlib artists are alive, which is what the `make graphs` above
      # did, for both language editions. This reads it and fails on any label
      # over the calibrated number of pixels either way, printing the band
      # below that for a person to judge.
      run: python scripts/check_figure_annotations.py
    - name: Fail if two tick labels of one axis run into each other
      # A band axis set by hand on a logarithmic scale keeps matplotlib's own
      # minor labels between the bands unless the minor formatter is cleared:
      # the octave axis of enclosed_space_absorption shipped reading
      # "2 × 10²50 4 × 10²500" under both panels. The figure matches its
      # generator, the annotation step above measures the labels a generator
      # places and not the ones an axis draws, and the committed file has no
      # text node to find a tick in, so the `make graphs` above measures every
      # axis of both language editions as it saves them. This fails on minor
      # labels left to the scale beside major ticks set by hand, and on any
      # two labels of one axis that touch.
      run: python scripts/check_figure_ticks.py
    - name: Fail if a Spanish figure numbers a tick with an English point
      # The decimal-comma check above reads the label a generator writes; this
      # reads the label a formatter wrote, in the figure as committed. They are
      # different halves: three machines localise a Spanish figure (the
      # library's localize_axes, format_frequency_axis where a caller hands it
      # the language, and the save-time pass), and a panel none of them reached
      # keeps its English point while the legend beside it carries the comma.
      # A zoom inset, a contour colorbar, the z of a 3-D array and a log axis
      # of distances each shipped that way. Reads the committed SVGs, so it
      # needs no rendering stack.
      run: python scripts/check_figure_decimal_point.py
    - name: Fail if a legend closes over a plotted point
      # A legend is an opaque plate the author places by hand, and its width is
      # set by its longest label, which is a defect waiting to happen in a
      # bilingual corpus: the Spanish label is routinely half again as long as
      # the English one, so a box that clears the data in one language reaches
      # back over it in the other. Every other gate stays green, because the
      # figure matches its generator, the colours pass and the annotation audit
      # measures labels rather than legends. This reads the committed SVGs for
      # a plotted point under a legend frame, and carries the drawings where
      # the mark under the box is a rail rather than a reading with the reason
      # each one is a decision.
      run: python scripts/check_figure_legends.py
    - name: Fail if a legend, a curve or a marker covers a tick label
      # A legend can land on a tick label as well as on a point, and a curve
      # can run through one: the radial labels of a polar plot sit inside it,
      # strung along one ray, and an inset writes its labels over the data of
      # the panel it sits in. The tick step above measures the labels of one
      # axis against each other and the annotation step the labels a
      # generator places, so neither sees it. This reads the committed SVGs
      # for anything drawn over a tick label, through the clip it is drawn
      # with, so it needs no rendering stack.
      run: python scripts/check_figure_tick_clearance.py
    - name: Fail if a label is drawn over a tick label, another label or a line
      # The step above measures the marks drawn over a tick label, not a
      # text, and the annotation step leaves the plates out. A note placed by
      # hand landed on the numbers of the axis beside it, the heading of a
      # plate lane was crossed by the impulse it names, and a note that ran
      # out of its axes was struck through by the spine. This reads the
      # committed SVGs, figures and plates, glyph by glyph, so a label turned
      # on a 3-D plate is read along its own baseline; the leader of an
      # annotation, the grid and a line behind a chip pass.
      run: python scripts/check_figure_text_clearance.py
    - name: Fail if a figure signs a number with a hyphen
      # The corpus signs its negative numbers with U+2212, and a polar angle
      # formatter that ignores axes.unicode_minus, a reading built with an
      # f-string and a plate that sets the characters it is handed each wrote
      # the hyphen-minus instead, a shorter, lower glyph beside the proper one.
      # This reads the string every committed SVG records beside its outlines,
      # all four variants, figures and plates alike.
      run: python scripts/check_figure_minus_sign.py

  # The Python snippets printed in the guides must run. They are the first
  # thing a reader copies, and nothing executed them until this job existed:
  # the metrology split shipped seven blocks where `from phonometry import
  # signals` sat next to `from scipy import signal` and silently rebound the
  # name, which Python does not warn about and no other gate can see. The
  # script also holds the English and Spanish pages to the same API and skips,
  # with a written reason, the pages whose blocks are excerpts of a workflow
  # rather than a script.
  doc-snippets:
    name: Documentation snippets run
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
        cache: 'pip'
    - name: Install dependencies
      # The guides plot and print fiches, so the snippets need the figure and
      # report stacks as well as the package itself.
      run: |
        python -m pip install --upgrade pip
        # The audio extra rides along because the io guide's snippets read and
        # write the formats it serves; a guide that documents the extra has to
        # run under it, the same reason the figure and report requirements are
        # here for the pages that draw and render.
        pip install -e ".[audio]"
        pip install -r requirements-figures.txt -r requirements-reports.txt
    - name: Run every snippet the guides print
      run: python scripts/check_doc_snippets.py

  # The guides are hard-wrapped, so a sentence can wrap onto a "-" or a ">" and
  # stop being a sentence: CommonMark ends the paragraph at the marker. One
  # variant takes the site build down (unclosed inline maths, which MDX then
  # evaluates as JavaScript); the other is silent and ships a quoted block in
  # the middle of a paragraph. Needs no dependencies, so it runs on its own
  # rather than waiting behind an install.
  markdown-hazards:
    name: Markdown renders the way it reads
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
    - name: Check the hand-written markdown
      run: python scripts/check_markdown_hazards.py
    - name: No em dash in the published prose
      # The house style writes its prose without the em dash, in the pages,
      # the mirrors, the CHANGELOG, the docstrings and the figure labels
      # alike; a standard's title reproduced as printed keeps its own. Static,
      # stdlib only, so it runs here with the markdown checks.
      run: python scripts/check_em_dashes.py
    - name: Every Spanish label keeps its accents and eñes
      # A translation typed without the Spanish keyboard layout reads fine to
      # every other gate, and twenty-nine figure labels shipped as
      # "Correccion", "medicion" and "aqui". This reads the translation tables
      # of the figures, the diagrams and the library's renderers, and the
      # example fiches built in Spanish, and fails on a form that is never
      # correct Spanish without its mark. Static, stdlib only, so it runs here
      # with the other checks on published text.
      run: python scripts/check_spanish_accents.py

  # A form feed is one invisible byte, and inside a raw docstring it is the
  # backslash and the f of the command that follows it: `\frac` was published
  # as `rac`, with the fraction gone and no error anywhere. Guard the class
  # rather than the byte. Needs no dependencies, so it runs on its own.
  control-characters:
    name: No stray control character
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
    - name: Check the tracked text files
      run: python scripts/check_control_characters.py

  # ISO 80000-2 sets a subscript by what it is, and a glyph pair can honestly
  # take both slopes: the z of the ISO 9613-2 barrier screening is a
  # path-length difference, the z of the ISO 2631-5 dose is a direction, and
  # both documents print D_z. So the slope is decided per file, which opens
  # with the standard it implements, and two slopes for one symbol inside one
  # file is a page contradicting itself. Static and dependency-free, so it runs
  # on its own rather than waiting behind an install.
  subscript-slope:
    name: One meaning per subscript per file
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
    - name: Check that no file sets one subscript both ways
      run: python scripts/check_subscript_slope.py

  # generate_api_docs copies the mathematics of a docstring to the site
  # verbatim, and KaTeX reads what the docstring actually holds. A doubled
  # backslash is a line break with a command after it, which KaTeX refuses,
  # and the page still ships with everything after the bad block swallowed.
  # The same four characters are correct in one kind of docstring and wrong in
  # the other, so this reads the value Python builds rather than the file. It
  # also refuses a bare command KaTeX will not take as a sub- or superscript
  # (|dL_n|_\max where |dL_n|_{\max} is meant), in the docstrings and in the
  # hand-written pages. The site job catches both too, after a full build; this
  # costs a second and runs without one.
  docstring-math:
    name: Docstring mathematics reaches the page intact
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
    - name: Check the docstrings and the pages for mathematics KaTeX refuses
      run: python scripts/check_docstring_math.py

  # Every helper that takes a language defaults to English, so a call that does
  # not pass the caller's on raises nothing and ships an English string or an
  # English decimal point in the Spanish figure. On a log frequency axis nothing
  # in the library repairs it: localize_axes skips that axis, whose labels are
  # fixed strings by the time it runs. Finding the calls needs the helper resolved
  # through the imports, a result's .plot() through its receiver and a **kwargs
  # through what it can carry, so the check is an AST walk rather than a grep.
  # Static and dependency-free, so it runs on its own.
  language-forwarding:
    name: Every call passes the language on
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
    - name: Check that no call leaves the caller's language behind
      run: python scripts/check_language_forwarding.py
    - name: Check that no style default collides with its own alias
      run: python scripts/check_plot_style_defaults.py
    - name: Check that no grouped number can break across a line
      run: python scripts/check_digit_grouping.py

  # A private module-level constant is a number lifted out of a standard so the
  # code that uses it can say where it came from, and one nothing reads is
  # either a leftover or the trace of a check the docstring above it still
  # promises. The sweep this came from found both: a recommended specimen
  # velocity carried and never checked, and a docstring promising a default the
  # code did not take. Static and dependency-free, so it runs on its own.
  dead-constants:
    name: No private constant goes unread
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
    - name: Check that every private constant is read somewhere
      run: python scripts/check_dead_constants.py

  # A level is a ratio to a reference value, and ISO 1683 fixes one per
  # quantity. The package publishes them once, as
  # phonometry.metrology.ISO1683_REFERENCE_VALUES; before that the same 20 µPa
  # was typed out seventeen times and one name meant a pressure in four modules
  # and a power in two. This fails on a reference value in src that repeats a
  # value of the table instead of reading it, and on one that differs from it
  # without naming the document it comes from. Deciding what a reference is
  # needs the name, the value and the comment beside it, so it is an AST walk
  # rather than a grep. Static and dependency-free, so it runs on its own.
  reference-values:
    name: Every reference value points at ISO 1683 or names its source
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
    - name: Check that no reference value is a copy or has no document
      run: python scripts/check_reference_values.py

  # A conformance row states what a standard prints and what this library
  # computes. A row that computes the expected value itself, from the same
  # constants, compares a formula with a second copy of it and reports Pass
  # whatever the library does; three did, and a wrong sign in the function they
  # certified would have gone out green. Counting them needs the delegation
  # resolved -- through helpers, across modules, and under whatever name the
  # imports gave the library -- so the check is an AST walk rather than a grep.
  # Static and dependency-free, so it runs on its own.
  conformance-rows:
    name: Every conformance row runs the library
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
    - name: Check that no row certifies the library without running it
      run: python scripts/check_conformance_rows.py

  # The committed example .report() fiches (.github/reports) must match a fresh
  # `make reports` run. Same drift gate as the figures, one layer further down
  # the pipeline: the fiches are what the documentation links to as worked
  # examples of what the library prints, so a stale one publishes a wrong
  # answer. Nothing checked them until this job existed, and two of them sat a
  # plot-styling release behind the code for weeks. The rendering stack is
  # pinned across both requirements files (matplotlib/numpy in -figures,
  # svglib/reportlab/pypdfium2 in -reports) because every link in the chain
  # fixes the rendered page the check compares.
  reports:
    name: Example report fiches up to date
    runs-on: ubuntu-latest
    permissions:
      contents: read
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"
        cache: 'pip'
    - name: Install the locked fiche-rendering stack
      run: |
        python -m pip install --upgrade pip
        pip install -e .
        # Pin the render+compute stack last so it wins over looser deps.
        pip install -r requirements-figures.txt -r requirements-reports.txt
    - name: Regenerate the example fiches
      run: make reports
    - name: Fail if any committed fiche is stale
      # Tolerance-aware compare instead of a byte diff: GitHub's heterogeneous
      # runner CPUs shift a few of the embedded plot's path coordinates ~1 ULP,
      # which rewrites the PDF page stream for no visible reason. The script
      # compares the extracted text exactly and the rendered page within a
      # calibrated pixel tolerance, so a real fiche change fails while
      # cross-CPU coordinate noise passes. See scripts/check_reports.py.
      run: python scripts/check_reports.py

  tests:
    runs-on: ${{ matrix.os }}
    permissions:
      contents: read
      # Required for the OIDC-based Codecov upload (no token secret needed).
      id-token: write
    strategy:
      fail-fast: false
      matrix:
        os: [ubuntu-latest, macos-latest, windows-latest]
        python-version: ["3.13", "3.14"]
    steps:
    - uses: actions/checkout@v7
    - name: Set up Python ${{ matrix.python-version }}
      uses: actions/setup-python@v7
      with:
        python-version: ${{ matrix.python-version }}
        cache: 'pip'
    - name: Install dependencies
      run: |
        python -m pip install --upgrade pip
        pip install -r requirements.txt
        pip install -r requirements-dev.txt
        pip install -e .
    # Heavy third-party oracle sets (the EBU loudness test set, the stipa.info
    # certified STIPA bench, the NORAH2 public release) are never fetched here.
    # The suites that use them fall back to the committed derived series and
    # extracts under tests/data/ - see tests/data/README.md - which is the path
    # CI takes, and whose assertions never skip. A handful of cases that exist
    # only to exercise a full set do skip here and report as such (the EBU
    # programme-audio cases and the full-bench inventory guard); pytest prints
    # the resolution in its run header.
    - name: Run tests
      # -n auto fans the suite out across the runner's cores via pytest-xdist;
      # pytest-cov combines the per-worker coverage into a single coverage.xml.
      # Pin the numerical thread pools to one thread each so the per-core xdist
      # workers do not oversubscribe the CPU with nested BLAS/OpenMP pools.
      env:
        OMP_NUM_THREADS: "1"
        MKL_NUM_THREADS: "1"
        OPENBLAS_NUM_THREADS: "1"
        NUMEXPR_NUM_THREADS: "1"
        VECLIB_MAXIMUM_THREADS: "1"
      run: |
        pytest -n auto --junitxml=test-results-${{ matrix.os }}-${{ matrix.python-version }}.xml --cov=src --cov-report=xml
    - name: Upload Test Results
      uses: actions/upload-artifact@v7
      with:
        name: test-results-${{ matrix.os }}-${{ matrix.python-version }}
        path: |
          test-results-${{ matrix.os }}-${{ matrix.python-version }}.xml
          coverage.xml
      if: always()
    - name: Upload coverage to Codecov
      if: matrix.os == 'ubuntu-latest'
      uses: codecov/codecov-action@v7
      with:
        files: coverage.xml
        use_oidc: true
        fail_ci_if_error: false

  # The main matrix runs against the latest numpy with the pure-Python
  # impulse kernel; this job is the only one exercising the numba-jitted
  # path (numba pins numpy, so it lives in its own environment).
  tests-perf:
    name: tests (numba-jitted kernel)
    runs-on: ubuntu-latest
    permissions:
      contents: read
    # Declared once for the whole job so the guard below runs under exactly the
    # environment it vouches for. Split across the two steps, the guard could
    # stay green on its own NUMBA_DISABLE_JIT while the suite lost its copy and
    # ran interpreted from end to end.
    env:
      # conftest.py disables JIT by default (coverage); override it here, this
      # is the only job exercising the numba-compiled kernel.
      NUMBA_DISABLE_JIT: "0"
      # Pin the numerical thread pools to one thread each so the per-core xdist
      # workers do not oversubscribe the CPU with nested BLAS/OpenMP pools,
      # exactly as the main test job does.
      OMP_NUM_THREADS: "1"
      MKL_NUM_THREADS: "1"
      OPENBLAS_NUM_THREADS: "1"
      NUMEXPR_NUM_THREADS: "1"
      VECLIB_MAXIMUM_THREADS: "1"
    steps:
    - uses: actions/checkout@v7
      with:
        persist-credentials: false
    # The newest Python the package supports. This job used to sit on 3.13
    # because numba trails a new interpreter by a release or two, and while it
    # did, the jitted kernel was never built against the newest Python we ship
    # for. numba 0.67.0 publishes cp314 wheels and carries the 3.14 classifier,
    # and it is the floor in pyproject.toml (numba>=0.67.0), so nothing older
    # can resolve here.
    # Tracking the newest version is the strictest single choice for this job:
    # a compiled extension meeting a new interpreter is the thing most likely
    # to break, and the pure-Python kernel is covered on both versions by the
    # main matrix regardless.
    - name: Set up Python 3.14
      uses: actions/setup-python@v7
      with:
        python-version: "3.14"
        cache: 'pip'
    - name: Install dependencies (with numba)
      run: |
        python -m pip install --upgrade pip
        pip install -r requirements-dev.txt
        pip install -e ".[perf,plot]"
    # Fails the job if the kernel falls back to the interpreted path, which
    # would leave this job green while exercising nothing it exists for.
    # Compiling here also fills numba's on-disk cache next to the module, so
    # the test workers below load the kernel instead of each compiling a copy.
    - name: Check the jitted kernel compiles
      run: python scripts/check_jit_kernel.py
    - name: Run tests (jitted kernel)
      # Same fan-out as the main matrix. The compiled kernel is not a reason
      # to stay serial: the step above compiles it once and the workers that
      # reach it read the cache in a fraction of a second, against a suite
      # that takes about twenty minutes to run one test at a time.
      run: pytest -q -n auto

  sonar:
    needs: tests
    runs-on: ubuntu-latest
    # Dependabot runs with a restricted token and no access to repository secrets, so
    # SONAR_TOKEN is empty there and the scan can only ever fail. Skip it for those runs.
    if: >-
      github.actor != 'dependabot[bot]' &&
      (github.event_name == 'pull_request' || github.ref == 'refs/heads/master' || github.ref == 'refs/heads/main')
    steps:
    - uses: actions/checkout@v7
      with:
        fetch-depth: 0
    - name: Download coverage report
      uses: actions/download-artifact@v8
      with:
        name: test-results-ubuntu-latest-3.13
    - name: SonarCloud Scan
      uses: SonarSource/sonarqube-scan-action@v8
      env:
        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
        SONAR_TOKEN: ${{ secrets.SONAR_TOKEN }}

  pr-comment:
    needs: [quality, tests]
    runs-on: ubuntu-latest
    if: always() && github.event_name == 'pull_request'
    permissions:
      contents: read
      pull-requests: write
      issues: write
    steps:
    # Full history: the comment is a diff of the committed conformance artefact
    # against the same file on the base branch, and a checkout at the default
    # depth has only the merge commit to show for it. A missing baseline is not
    # an error - the comment falls back to totals and says so - but it makes
    # every pull request look like it changed nothing.
    - uses: actions/checkout@v7
      with:
        fetch-depth: 0

    - name: Set up Python 3.13
      uses: actions/setup-python@v7
      with:
        python-version: "3.13"

    # Stdlib only. The comment reads two committed JSON files and joins them;
    # it does not run the checks. It used to install the whole scientific stack
    # and spend 45 s regenerating a report the `conformance` job has already
    # proven current, which meant a stale artefact was reported twice and
    # fixed by neither.

    - name: Download Test Results
      uses: actions/download-artifact@v8
      with:
        pattern: test-results-*
        path: test-results
      continue-on-error: true
    
    - name: Generate Comment Body
      run: python .github/scripts/comment_pr.py
      env:
        GITHUB_REPOSITORY: ${{ github.repository }}
        GITHUB_RUN_ID: ${{ github.run_id }}
        # The branch the artefact is diffed against, and the commit the two
        # "full report" links are permalinks to. `github.sha` on a pull request
        # is the merge commit, which is not a commit anyone can browse.
        GITHUB_BASE_REF: ${{ github.base_ref }}
        GITHUB_HEAD_SHA: ${{ github.event.pull_request.head.sha }}

    - name: Post PR Comment
      uses: actions/github-script@v9
      with:
        script: |
          const fs = require('fs');
          const body = fs.readFileSync('pr_comment_body.md', 'utf8');
          const marker = '<!-- phonometry-ci-conformance -->';

          // Update the single sticky conformance comment instead of posting a
          // new one every run: find the existing marked comment and edit it.
          const { data: comments } = await github.rest.issues.listComments({
            issue_number: context.issue.number,
            owner: context.repo.owner,
            repo: context.repo.repo,
            per_page: 100,
          });
          const existing = comments.find(
            (c) => c.body && c.body.includes(marker)
          );
          if (existing) {
            await github.rest.issues.updateComment({
              owner: context.repo.owner,
              repo: context.repo.repo,
              comment_id: existing.id,
              body: body,
            });
          } else {
            await github.rest.issues.createComment({
              issue_number: context.issue.number,
              owner: context.repo.owner,
              repo: context.repo.repo,
              body: body,
            });
          }