fix: make V1Channel re-subscribable after a failed subscribe

roborock/devices/device.py

@@ -202,7 +202,10 @@ async def connect(self) -> None:
                 await self.v1_properties.start()
             elif self.b01_q10_properties is not None:
                 await self.b01_q10_properties.start()
-        except RoborockException:
+        except BaseException:
+            # Any failure in start() must unsubscribe before propagating, so a
+            # retry by connect_loop() gets a clean channel. Broader than
+            # RoborockException so non-Roborock errors also release the channel.
             unsub()
             raise
         self._logger.info("Connected to device")

roborock/devices/rpc/v1_channel.py

@@ -295,45 +295,66 @@ async def subscribe(self, callback: Callable[[RoborockMessage], None]) -> Callab
         if self._callback is not None:
             raise ValueError("Only one subscription allowed at a time")
 
-        # Make an initial, optimistic attempt to connect to local with the
-        # cache. The cache information will be refreshed by the background task.
-        try:
-            await self._local_connect(prefer_cache=True)
-        except RoborockException as err:
-            self._logger.debug("First local connection attempt failed, will retry: %s", err)
-
-        # Start a background task to manage the local connection health. This
-        # happens independent of whether we were able to connect locally now.
-        if self._reconnect_task is None:
-            loop = asyncio.get_running_loop()
-            self._reconnect_task = loop.create_task(self._background_reconnect())
-
-        # We maintain an active MQTT subscription even when connected locally to receive
-        # unsolicited status updates (DPS push messages) directly from the cloud.
+        # Claim the subscription up front. Any failure in the setup below routes
+        # through _teardown(), which clears this again so the channel is left in
+        # a clean, re-subscribable state. Without this, a partially-completed
+        # subscribe (e.g. a transient failure later in connect()) would leave a
+        # stale callback and the next subscribe() would raise the guard above.
+        self._callback = callback
         try:
-            self._mqtt_unsub = await self._mqtt_channel.subscribe(self._on_mqtt_message)
-        except RoborockException as err:
-            if not self.is_local_connected:
-                # Propagate error if both local and MQTT failed
-                self._logger.debug("MQTT connection also failed: %s", err)
-                raise
-            self._logger.debug("MQTT subscription failed, continuing with local-only connection: %s", err)
-
-        def unsub() -> None:
-            """Unsubscribe from all messages."""
-            if self._reconnect_task:
-                self._reconnect_task.cancel()
-                self._reconnect_task = None
-            if self._mqtt_unsub:
-                self._mqtt_unsub()
-                self._mqtt_unsub = None
-            if self._local_unsub:
-                self._local_unsub()
-                self._local_unsub = None
-            self._logger.debug("Unsubscribed from device")
+            # Make an initial, optimistic attempt to connect to local with the
+            # cache. The cache information will be refreshed by the background task.
+            try:
+                await self._local_connect(prefer_cache=True)
+            except RoborockException as err:
+                self._logger.debug("First local connection attempt failed, will retry: %s", err)
 
-        self._callback = callback
-        return unsub
+            # Start a background task to manage the local connection health. This
+            # happens independent of whether we were able to connect locally now.
+            if self._reconnect_task is None:
+                loop = asyncio.get_running_loop()
+                self._reconnect_task = loop.create_task(self._background_reconnect())
+
+            # We maintain an active MQTT subscription even when connected locally to receive
+            # unsolicited status updates (DPS push messages) directly from the cloud.
+            try:
+                self._mqtt_unsub = await self._mqtt_channel.subscribe(self._on_mqtt_message)
+            except RoborockException as err:
+                if not self.is_local_connected:
+                    # Propagate error if both local and MQTT failed
+                    self._logger.debug("MQTT connection also failed: %s", err)
+                    raise
+                self._logger.debug("MQTT subscription failed, continuing with local-only connection: %s", err)
+        except BaseException:
+            # Any failure during setup must leave the channel re-subscribable:
+            # cancel the reconnect task, drop subscriptions, and clear _callback.
+            self._teardown()
+            raise
+
+        self._logger.debug("Subscribed to device")
+        return self._teardown
+
+    def _teardown(self) -> None:
+        """Tear down all subscriptions and reset the channel to a re-subscribable state.
+
+        Returned from subscribe() as the unsubscribe function and also invoked on
+        any failure partway through subscribe(). Idempotent: each resource is
+        guarded so repeat calls are no-ops.
+        """
+        if self._reconnect_task:
+            self._reconnect_task.cancel()
+            self._reconnect_task = None
+        if self._mqtt_unsub:
+            self._mqtt_unsub()
+            self._mqtt_unsub = None
+        if self._local_unsub:
+            self._local_unsub()
+            self._local_unsub = None
+        if self._local_channel:
+            self._local_channel.close()
+            self._local_channel = None
+        self._callback = None
+        self._logger.debug("Unsubscribed from device")
 
     def add_dps_listener(self, listener: Callable[[dict[RoborockDataProtocol, Any]], None]) -> Callable[[], None]:
         """Add a listener for DPS updates.

tests/devices/rpc/test_v1_channel.py

@@ -642,3 +642,63 @@ async def test_v1_channel_dps_listener_raises_exception(
 
     unsub_dps1()
     unsub_dps2()
+
+
+async def test_v1_channel_resubscribe_after_unsub(
+    v1_channel: V1Channel,
+    mock_mqtt_channel: FakeChannel,
+) -> None:
+    """A subscribe -> unsub -> subscribe cycle must not raise.
+
+    Regression: unsub() previously failed to clear ``_callback``, so the second
+    subscribe() tripped the "Only one subscription allowed at a time" guard.
+    This is the exact failure that bricked a second vacuum sharing an account.
+    """
+    mock_mqtt_channel.response_queue.append(TEST_NETWORK_INFO_RESPONSE)
+    unsub = await v1_channel.subscribe(Mock())
+    assert v1_channel._callback is not None
+
+    unsub()
+    # The whole point of the fix: tearing down clears the callback.
+    assert v1_channel._callback is None
+    assert v1_channel._reconnect_task is None
+    assert not mock_mqtt_channel.subscribers
+
+    # Re-subscribing must succeed (network info is now cached, no MQTT needed).
+    unsub2 = await v1_channel.subscribe(Mock())
+    assert v1_channel._callback is not None
+    assert mock_mqtt_channel.subscribers
+    unsub2()
+
+
+async def test_v1_channel_subscribe_failure_is_atomic(
+    v1_channel: V1Channel,
+    mock_mqtt_channel: FakeChannel,
+    mock_local_channel: FakeChannel,
+) -> None:
+    """A failure partway through subscribe() leaves the channel re-subscribable.
+
+    Regression: a failed subscribe() previously leaked the background reconnect
+    task and a partial subscription, so the next attempt could neither reuse nor
+    cleanly recreate the channel.
+    """
+    # Both transports down: local connect fails and the MQTT subscribe fails.
+    mock_local_channel.connect.side_effect = RoborockException("local down")
+    mock_mqtt_channel.subscribe.side_effect = RoborockException("mqtt down")
+
+    with pytest.raises(RoborockException):
+        await v1_channel.subscribe(Mock())
+
+    # No leaked task, no stale callback, no dangling subscription.
+    assert v1_channel._callback is None
+    assert v1_channel._reconnect_task is None
+    assert v1_channel._mqtt_unsub is None
+    assert not mock_mqtt_channel.subscribers
+
+    # And the channel is re-subscribable once the transports recover.
+    mock_local_channel.connect.side_effect = None
+    mock_mqtt_channel.subscribe.side_effect = mock_mqtt_channel._subscribe
+    mock_mqtt_channel.response_queue.append(TEST_NETWORK_INFO_RESPONSE)
+    unsub = await v1_channel.subscribe(Mock())
+    assert v1_channel._callback is not None
+    unsub()

tests/devices/test_v1_device.py

@@ -8,14 +8,18 @@
 import pytest
 from syrupy import SnapshotAssertion
 
-from roborock.data import HomeData, S7MaxVStatus, UserData
-from roborock.devices.cache import DeviceCache, NoCache
+from roborock.data import HomeData, NetworkInfo, S7MaxVStatus, UserData
+from roborock.devices.cache import DeviceCache, DeviceCacheData, InMemoryCache, NoCache
 from roborock.devices.device import RoborockDevice
+from roborock.devices.rpc.v1_channel import V1Channel
 from roborock.devices.traits import v1
 from roborock.devices.traits.v1.common import V1TraitMixin
-from roborock.protocols.v1_protocol import decode_rpc_response
+from roborock.devices.transport.local_channel import LocalSession
+from roborock.exceptions import RoborockException
+from roborock.protocols.v1_protocol import SecurityData, decode_rpc_response
 from roborock.roborock_message import RoborockMessage, RoborockMessageProtocol
 from tests import mock_data
+from tests.fixtures.channel_fixtures import FakeChannel
 
 USER_DATA = UserData.from_dict(mock_data.USER_DATA)
 HOME_DATA = HomeData.from_dict(mock_data.HOME_DATA_RAW)
@@ -181,3 +185,92 @@ async def test_device_trait_command_parsing(
     assert device.v1_properties
     device_dict = device.diagnostic_data()
     assert device_dict == snapshot
+
+
+@pytest.mark.parametrize(
+    "start_error",
+    [RoborockException("transient status fetch failed"), ValueError("unexpected")],
+    ids=["roborock-exception", "non-roborock-exception"],
+)
+async def test_connect_unsubscribes_when_start_fails(
+    device: RoborockDevice,
+    channel: AsyncMock,
+    start_error: Exception,
+) -> None:
+    """connect() must release the channel when start() fails, for any exception.
+
+    Regression: the cleanup was scoped to ``except RoborockException``, so a
+    non-Roborock failure in start() propagated without unsubscribing, leaving the
+    channel subscribed and the next attempt unable to re-subscribe.
+    """
+    unsub = Mock()
+    channel.subscribe = AsyncMock(return_value=unsub)
+    device.v1_properties.start = AsyncMock(side_effect=start_error)
+
+    with pytest.raises(type(start_error)):
+        await device.connect()
+
+    channel.subscribe.assert_awaited_once()
+    unsub.assert_called_once()  # channel released before propagating
+    assert device._unsub is None  # not marked connected; safe for connect_loop to retry
+
+
+async def test_connect_retries_after_transient_start_failure() -> None:
+    """End-to-end regression for the Q5 multi-vacuum bug.
+
+    A device backed by a real V1Channel: the first connect() subscribes, then
+    start() fails transiently. The retry must re-subscribe cleanly rather than
+    raising "Only one subscription allowed at a time", and the device must end
+    up connected.
+    """
+    duid = HOME_DATA.devices[0].duid
+
+    mqtt_channel = FakeChannel()
+    await mqtt_channel.connect()
+    local_channel = FakeChannel()
+    local_session = Mock(spec=LocalSession, return_value=local_channel)
+
+    # Cache the network info so local connect doesn't need an MQTT round-trip.
+    cache = InMemoryCache()
+    device_cache = DeviceCache(duid, cache)
+    await device_cache.set(DeviceCacheData(network_info=NetworkInfo.from_dict(mock_data.NETWORK_INFO)))
+
+    v1_channel = V1Channel(
+        device_uid=duid,
+        security_data=SecurityData(endpoint="test_endpoint", nonce=b"test_nonce_16byte"),
+        mqtt_channel=mqtt_channel,
+        local_session=local_session,
+        device_cache=device_cache,
+    )
+    device = RoborockDevice(
+        device_info=HOME_DATA.devices[0],
+        product=HOME_DATA.products[0],
+        channel=v1_channel,
+        trait=v1.create(
+            duid,
+            HOME_DATA.products[0],
+            HOME_DATA,
+            AsyncMock(),
+            AsyncMock(),
+            AsyncMock(),
+            Mock(),
+            AsyncMock(),
+            device_cache=device_cache,
+            region=USER_DATA.region,
+        ),
+    )
+
+    # First connect() subscribes successfully, then start() fails transiently;
+    # the second succeeds.
+    device.v1_properties.start = AsyncMock(side_effect=[RoborockException("transient"), None])
+
+    with pytest.raises(RoborockException):
+        await device.connect()
+    assert device._unsub is None  # channel released after the transient failure
+
+    # The retry must NOT raise "Only one subscription allowed at a time".
+    await device.connect()
+    assert device._unsub is not None
+    assert device.is_connected
+
+    await device.close()