From a8a45d546724572757b7d936b81998b5e39e2136 Mon Sep 17 00:00:00 2001 From: Navid Sassan Date: Fri, 13 Nov 2026 17:00:20 +0100 Subject: [PATCH] feat(mysql-innodb-buffer-pool-size): show the pool usage, warn on waits for a free page - Report how much of the buffer pool is in use and whether it is full, that is down to the reserve of free pages InnoDB keeps (innodb_lru_scan_depth, per instance on MySQL). New perfdata mysql_innodb_buffer_pool_bytes_data and _pct_used, new Grafana panel. - WARN when Innodb_buffer_pool_wait_free moved since the last check, --warning-waits (default 0) for servers where bulk loads may run into it. MariaDB from 10.6.18, 10.11.8 and 11.4.2 waits up to a second per count, older MariaDB and MySQL count every retry. - README: how the pool fills, how to read the numbers, how to size it. Verified on MariaDB 10.6.28, 10.11, 11.4.13, 11.8.9 and MySQL 8.0.46, 8.4.13, 9.3. "Full" with 8 buffer pool instances measured on MySQL 8.0.46 and 8.4.13 (1 GiB pool: 8192 to 9586 free pages when idle). A pool below about twice the reserve (48 MiB on MariaDB) is not reliably recognised as full. --- CHANGELOG.md | 2 +- .../icingaweb2-module-director-basket.json | 5828 +++++++++-------- .../mysql-innodb-buffer-pool-size/README.md | 86 +- .../grafana/mysql-innodb-buffer-pool-size.yml | 112 + .../mysql-innodb-buffer-pool-size.json | 24 +- .../mysql-innodb-buffer-pool-size | 134 +- .../unit-test/run | 29 +- 7 files changed, 3283 insertions(+), 2932 deletions(-) diff --git a/CHANGELOG.md b/CHANGELOG.md index ab31b4613..33ef9e55a 100644 --- a/CHANGELOG.md +++ b/CHANGELOG.md @@ -33,7 +33,7 @@ Monitoring Plugins: * lynis-logfile: Reports how many tests the lynis profile skips. * mysql-connections: Speaks of failed connection attempts instead of aborted connections, and points to the denied logins. * mysql-index-health: Redundant indexes no longer alert by default. -* mysql-innodb-buffer-pool-size: No longer alerts just because the data is larger than the buffer pool. +* mysql-innodb-buffer-pool-size: No longer alerts just because the data is larger than the buffer pool, and warns when sessions found no free page in it. * mysql-memory: Alerts on the memory the database server really uses, the calculated worst case and other processes no longer alert. * mysql-perf-metrics: `innodb_snapshot_isolation` no longer alerts, and `--storage-type=auto` no longer judges virtual disks. * mysql-temp-tables: No longer alerts by default, and no longer advises raising `tmp_table_size`. diff --git a/check-plugins/icinga-director-basket-drift/assets/icingaweb2-module-director-basket.json b/check-plugins/icinga-director-basket-drift/assets/icingaweb2-module-director-basket.json index 6332717bb..c50752893 100644 --- a/check-plugins/icinga-director-basket-drift/assets/icingaweb2-module-director-basket.json +++ b/check-plugins/icinga-director-basket-drift/assets/icingaweb2-module-director-basket.json @@ -23782,6 +23782,17 @@ "uuid": "d7a4836d-7c43-4d57-b932-359de134005b" }, "2280": { + "varname": "mysql_innodb_buffer_pool_size_warning_waits", + "caption": "MySQL Innodb Buffer Pool Size: Warning Waits", + "description": "WARN threshold for the times per second a session found no free page in the buffer pool. Raise it where bulk loads are allowed to run into this. Supports Nagios ranges. Example: `--warning-waits=5`.", + "datatype": "Icinga\\Module\\Director\\DataType\\DataTypeString", + "format": null, + "settings": { + "visibility": "visible" + }, + "uuid": "68247b09-17ae-414b-b1a8-8e2117c33611" + }, + "2281": { "varname": "mysql_innodb_log_waits_always_ok", "caption": "MySQL Innodb Log Waits: Always OK?", "description": "Always returns OK.", @@ -23790,7 +23801,7 @@ "settings": {}, "uuid": "fefbd725-b987-42ec-a6f1-6c7f6ff4be7a" }, - "2281": { + "2282": { "varname": "mysql_innodb_log_waits_critical", "caption": "MySQL Innodb Log Waits: Critical", "description": "Threshold for redo log pressure, in percent of the point where InnoDB starts to flush synchronously and holds back writing sessions.", @@ -23801,7 +23812,7 @@ }, "uuid": "6097ea33-3cba-4c35-82f9-a20f09caea5d" }, - "2282": { + "2283": { "varname": "mysql_innodb_log_waits_defaults_file", "caption": "MySQL Innodb Log Waits: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -23812,7 +23823,7 @@ }, "uuid": "805cdc58-ead5-43be-8b57-07d27f987d1e" }, - "2283": { + "2284": { "varname": "mysql_innodb_log_waits_defaults_group", "caption": "MySQL Innodb Log Waits: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -23823,7 +23834,7 @@ }, "uuid": "6d29f814-3d60-4d19-8d6d-f92e30c01da2" }, - "2284": { + "2285": { "varname": "mysql_innodb_log_waits_no_perfdata", "caption": "MySQL Innodb Log Waits: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -23832,7 +23843,7 @@ "settings": {}, "uuid": "2406e22a-4746-45a8-9b0e-d94b76a91161" }, - "2285": { + "2286": { "varname": "mysql_innodb_log_waits_timeout", "caption": "MySQL Innodb Log Waits: Timeout", "description": "Network timeout in seconds.", @@ -23843,7 +23854,7 @@ }, "uuid": "e885b7f0-a896-418d-b3ec-27abec1ae863" }, - "2286": { + "2287": { "varname": "mysql_innodb_log_waits_warning", "caption": "MySQL Innodb Log Waits: Warning", "description": "Threshold for redo log pressure, in percent of the point where InnoDB starts to flush synchronously and holds back writing sessions.", @@ -23854,7 +23865,7 @@ }, "uuid": "93889a8d-1720-4728-ba85-c8b9ebedc628" }, - "2287": { + "2288": { "varname": "mysql_joins_always_ok", "caption": "MySQL Joins: Always OK?", "description": "Always returns OK.", @@ -23863,7 +23874,7 @@ "settings": {}, "uuid": "a7735356-5c87-4c41-947c-2e72698edea9" }, - "2288": { + "2289": { "varname": "mysql_joins_defaults_file", "caption": "MySQL Joins: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -23874,7 +23885,7 @@ }, "uuid": "de806152-e096-47ef-8436-a3839c080c22" }, - "2289": { + "2290": { "varname": "mysql_joins_defaults_group", "caption": "MySQL Joins: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -23885,7 +23896,7 @@ }, "uuid": "c9602b0d-594f-421e-9a8a-a2337dbd2bbb" }, - "2290": { + "2291": { "varname": "mysql_joins_min_uptime_hours", "caption": "MySQL Joins: Min Uptime Hours", "description": "Minimum server uptime (in hours) before the plugin starts evaluating the rate of joins without indexes. The rate is a per-day average over the uptime, so a freshly booted server extrapolates a handful of joins to hundreds per day. Below the threshold the rate is reported but does not raise WARN. Example: `--min-uptime-hours=48`.", @@ -23896,7 +23907,7 @@ }, "uuid": "bca0afe0-8e28-492a-9fc1-6e0c965edf2d" }, - "2291": { + "2292": { "varname": "mysql_joins_no_perfdata", "caption": "MySQL Joins: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -23905,7 +23916,7 @@ "settings": {}, "uuid": "c2370a0f-0461-4a80-821f-64f415b26e95" }, - "2292": { + "2293": { "varname": "mysql_joins_timeout", "caption": "MySQL Joins: Timeout", "description": "Network timeout in seconds.", @@ -23916,7 +23927,7 @@ }, "uuid": "27c9cea6-cde4-422e-84fd-af7b55ee67ab" }, - "2293": { + "2294": { "varname": "mysql_logfile_aborted_connections_critical", "caption": "MySQL Logfile: Aborted Connections Critical", "description": "Number of connections the clients dropped within `--lookback` that returns CRITICAL. Counted per client host, so one application falling over reaches it while the same number spread over a fleet does not. 0 turns the threshold off. Example: `--aborted-connections-critical=500`.", @@ -23927,7 +23938,7 @@ }, "uuid": "32482c87-1dbc-4cd0-831f-a95d4f74d01f" }, - "2294": { + "2295": { "varname": "mysql_logfile_aborted_connections_warning", "caption": "MySQL Logfile: Aborted Connections Warning", "description": "Number of connections the clients dropped within `--lookback` that returns WARNING. Counted per client host, so one application falling over reaches it while the same number spread over a fleet does not. 0 turns the threshold off. Example: `--aborted-connections-warning=50`.", @@ -23938,7 +23949,7 @@ }, "uuid": "f03e9592-00b4-41a6-a75f-4e6d4fb9b6f5" }, - "2295": { + "2296": { "varname": "mysql_logfile_access_denied_critical", "caption": "MySQL Logfile: Access Denied Critical", "description": "Number of logins the server turned away within `--lookback` that returns CRITICAL. 0 turns the threshold off. Example: `--access-denied-critical=200`.", @@ -23949,7 +23960,7 @@ }, "uuid": "5a9be243-ed66-41ec-8f22-635c01eb23cb" }, - "2296": { + "2297": { "varname": "mysql_logfile_access_denied_warning", "caption": "MySQL Logfile: Access Denied Warning", "description": "Number of logins the server turned away within `--lookback` that returns WARNING. Counted per source address, so a run against one account from one host reaches it while the same number of typos across a fleet does not. 0 turns the threshold off. Example: `--access-denied-warning=1`.", @@ -23960,7 +23971,7 @@ }, "uuid": "c032f864-2e96-4eaf-a358-d1e344cad3dd" }, - "2297": { + "2298": { "varname": "mysql_logfile_always_ok", "caption": "MySQL Logfile: Always OK?", "description": "Always returns OK.", @@ -23969,7 +23980,7 @@ "settings": {}, "uuid": "5e63e133-8dbc-4eec-981e-8447414d30bc" }, - "2298": { + "2299": { "varname": "mysql_logfile_cache_expire", "caption": "MySQL Logfile: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -23980,7 +23991,7 @@ }, "uuid": "cb5bfba2-8cce-4e8f-8268-b5e9b8de7f5f" }, - "2299": { + "2300": { "varname": "mysql_logfile_defaults_file", "caption": "MySQL Logfile: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Has to be a regular file that belongs to the account running the check (the one calling sudo); any other is not used. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -23991,7 +24002,7 @@ }, "uuid": "6d3a5f0e-7aeb-4a5b-9b65-a5cbf595a8e0" }, - "2300": { + "2301": { "varname": "mysql_logfile_defaults_group", "caption": "MySQL Logfile: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -24002,7 +24013,7 @@ }, "uuid": "a1835a71-e192-4350-96c6-ed97c1ec3f31" }, - "2301": { + "2302": { "varname": "mysql_logfile_hostname", "caption": "MySQL Logfile: Hostname", "description": "MySQL/MariaDB hostname or IP address.", @@ -24013,7 +24024,7 @@ }, "uuid": "78fec2c7-6200-47be-ae54-013c1b9cdc59" }, - "2302": { + "2303": { "varname": "mysql_logfile_icinga_callback", "caption": "MySQL Logfile: Icinga Callback?", "description": "Ask the monitoring server whether the service running this check is acknowledged. Where it is, what this run reports is remembered as already handled, so it no longer raises an alert on the following runs. Requires `--icinga-url`, `--icinga-username`, `--icinga-password` and `--icinga-service-name`.", @@ -24022,7 +24033,7 @@ "settings": {}, "uuid": "2298be1a-7ef5-4106-bfed-1939bccf25fa" }, - "2303": { + "2304": { "varname": "mysql_logfile_icinga_password", "caption": "MySQL Logfile: Icinga Password", "description": "Monitoring server API password.", @@ -24033,7 +24044,7 @@ }, "uuid": "cd34c5c1-87d7-4d5e-8329-62b089893b37" }, - "2304": { + "2305": { "varname": "mysql_logfile_icinga_service_name", "caption": "MySQL Logfile: Icinga Service Name", "description": "Unique name of the service running this check, as the monitoring server knows it. Take it from the `__name` service attribute. Example: `monitoring-server!my-service-name`.", @@ -24044,7 +24055,7 @@ }, "uuid": "990a59f6-abca-4a50-be50-92706437e7c3" }, - "2305": { + "2306": { "varname": "mysql_logfile_icinga_url", "caption": "MySQL Logfile: Icinga URL", "description": "Monitoring server API URL. Example: `https://monitoring.example.com:5665`.", @@ -24055,7 +24066,7 @@ }, "uuid": "5d476017-b0b5-42cb-bf56-3d6d73f052bb" }, - "2306": { + "2307": { "varname": "mysql_logfile_icinga_username", "caption": "MySQL Logfile: Icinga Username", "description": "Monitoring server API username.", @@ -24066,7 +24077,7 @@ }, "uuid": "d6510ee3-c692-49b6-b3b6-3e61713c1f1f" }, - "2307": { + "2308": { "varname": "mysql_logfile_ignore", "caption": "MySQL Logfile: Ignore", "description": "Ignore a log line matching this Python regular expression. The log line is lowercased before matching, so write the pattern in lowercase (or use the `(?i)` flag). Can be specified multiple times. Example: `--ignore='(?i)linuxfabrik'`.", @@ -24077,7 +24088,7 @@ }, "uuid": "e2ffffd8-1847-47e8-8f89-d284c92baf15" }, - "2308": { + "2309": { "varname": "mysql_logfile_insecure", "caption": "MySQL Logfile: Insecure?", "description": "Applies to the connection to the monitoring server that `--icinga-callback` makes. This option explicitly allows insecure SSL connections.", @@ -24086,7 +24097,7 @@ "settings": {}, "uuid": "ebd2176c-2102-437d-b6c3-1be8a0775aad" }, - "2309": { + "2310": { "varname": "mysql_logfile_lookback", "caption": "MySQL Logfile: Lookback", "description": "Logins the server turned away are counted within this window rather than reported one by one. Time window in seconds to look back over, ending at the moment of the run. Only what falls within it is counted, so what is reported is how often something happened lately rather than a total that keeps growing for as long as the source is kept. Example: `--lookback=3600`.", @@ -24097,7 +24108,7 @@ }, "uuid": "ed646c1e-f15a-4c4a-a0e1-ead7f18f02ab" }, - "2310": { + "2311": { "varname": "mysql_logfile_match", "caption": "MySQL Logfile: Match", "description": "Only consider a log line matching this Python regular expression. The log line is lowercased before matching, so write the pattern in lowercase (or use the `(?i)` flag). Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Example: `--match='innodb'`.", @@ -24108,7 +24119,7 @@ }, "uuid": "6758938b-df16-4d4c-8335-09377f1d89d2" }, - "2311": { + "2312": { "varname": "mysql_logfile_no_insecure", "caption": "MySQL Logfile: No Insecure?", "description": "Applies to the connection to the monitoring server that `--icinga-callback` makes. Verify the TLS certificate against the system trust store, overriding the insecure default of this check. Use it once the endpoint presents a publicly trusted certificate, or once its CA has been added to the system trust store.", @@ -24117,7 +24128,7 @@ "settings": {}, "uuid": "74335c0b-a0ec-4c5a-9f25-d432d2edef89" }, - "2312": { + "2313": { "varname": "mysql_logfile_no_match_severity", "caption": "MySQL Logfile: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -24130,7 +24141,7 @@ }, "uuid": "ae701871-6717-4d99-b516-002a8e7e4452" }, - "2313": { + "2314": { "varname": "mysql_logfile_no_per_source", "caption": "MySQL Logfile: No Per Source?", "description": "Judge a rate by everything that arrived within the window, whatever source the lines name. Use this where the log reaches this check through something that rewrites or drops the address of the peer, or where every source is as interesting as the next.", @@ -24139,7 +24150,7 @@ "settings": {}, "uuid": "3315a9d9-4fba-4cdc-b6d5-99f2dd51bcec" }, - "2314": { + "2315": { "varname": "mysql_logfile_no_perfdata", "caption": "MySQL Logfile: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -24148,7 +24159,7 @@ "settings": {}, "uuid": "412891b4-a266-4965-9d4a-51770621f99b" }, - "2315": { + "2316": { "varname": "mysql_logfile_no_proxy", "caption": "MySQL Logfile: No Proxy?", "description": "Applies to the connection to the monitoring server that `--icinga-callback` makes. Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -24157,7 +24168,7 @@ "settings": {}, "uuid": "58988fd2-3778-41f0-9840-6ca011fdc633" }, - "2316": { + "2317": { "varname": "mysql_logfile_per_source", "caption": "MySQL Logfile: Per Source?", "description": "Judge a rate by the busiest single source address rather than by everything that arrived. A handful of failures from one address within the window is somebody working on this host; the same number spread over as many addresses is the background of an open network going past, and only the first is worth reporting. Lines that name no source are counted together as one, so a burst of those still reports.", @@ -24166,7 +24177,7 @@ "settings": {}, "uuid": "c965756f-7855-433b-9ec3-7ccecaa90447" }, - "2317": { + "2318": { "varname": "mysql_logfile_port", "caption": "MySQL Logfile: Port", "description": "MySQL/MariaDB port number.", @@ -24177,7 +24188,7 @@ }, "uuid": "3b721c59-1a25-48a4-9ebe-70d27be7f341" }, - "2318": { + "2319": { "varname": "mysql_logfile_proxy", "caption": "MySQL Logfile: Proxy", "description": "Applies to the connection to the monitoring server that `--icinga-callback` makes. Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -24188,7 +24199,7 @@ }, "uuid": "a2897d76-cf02-4d73-991a-ea0c814c700a" }, - "2319": { + "2320": { "varname": "mysql_logfile_server_log", "caption": "MySQL Logfile: Server Log", "description": "Log source to read from. Accepts a file path, `docker:CONTAINER`, `podman:CONTAINER`, `kubectl:CONTAINER` or `systemd:UNITNAME`. Can be specified multiple times, and everything named is then read as one window; a source named twice is read once. If omitted, the check first probes `performance_schema.error_log` (MySQL 8.0.22+) and then falls back to the file from `log_error`, read along with the journal of the database unit; what the two share is counted once.", @@ -24199,7 +24210,7 @@ }, "uuid": "e700457c-57c2-4934-ae9b-dd76d24a66db" }, - "2320": { + "2321": { "varname": "mysql_logfile_timeout", "caption": "MySQL Logfile: Timeout", "description": "Network timeout in seconds.", @@ -24210,7 +24221,7 @@ }, "uuid": "ba39a9b9-a5fa-454d-ad57-95860911fab4" }, - "2321": { + "2322": { "varname": "mysql_long_queries_always_ok", "caption": "MySQL Long Queries: Always OK?", "description": "Always returns OK.", @@ -24219,7 +24230,7 @@ "settings": {}, "uuid": "9d36be7a-68a4-401a-aeaf-206797eb0bd4" }, - "2322": { + "2323": { "varname": "mysql_long_queries_critical", "caption": "MySQL Long Queries: Critical", "description": "Query runtime in seconds that triggers CRIT. Supports Nagios ranges. Example: `--critical=60`.", @@ -24230,7 +24241,7 @@ }, "uuid": "47c6d643-9bf6-44ad-8f99-1bfcdfd1de97" }, - "2323": { + "2324": { "varname": "mysql_long_queries_defaults_file", "caption": "MySQL Long Queries: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -24241,7 +24252,7 @@ }, "uuid": "034a4eb5-ade1-4334-83fa-eb39bfe2bd87" }, - "2324": { + "2325": { "varname": "mysql_long_queries_defaults_group", "caption": "MySQL Long Queries: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -24252,7 +24263,7 @@ }, "uuid": "55701559-2ca2-4838-a3f6-804dd3c327de" }, - "2325": { + "2326": { "varname": "mysql_long_queries_ignore", "caption": "MySQL Long Queries: Ignore", "description": "Regex applied to the running statement. Matching queries are ignored (e.g. `--ignore=^mysqldump` to exclude backup runs). Repeat the flag for multiple patterns. Example: `--ignore=ANALYZE --ignore=^mysqldump`", @@ -24263,7 +24274,7 @@ }, "uuid": "e714b357-ccb2-4ba2-b5a6-30b21335c415" }, - "2326": { + "2327": { "varname": "mysql_long_queries_lengthy", "caption": "MySQL Long Queries: Lengthy?", "description": "Extended reporting.", @@ -24272,7 +24283,7 @@ "settings": {}, "uuid": "1d3d0fee-d9bc-41f0-bf48-bcb50493138e" }, - "2327": { + "2328": { "varname": "mysql_long_queries_no_perfdata", "caption": "MySQL Long Queries: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -24281,7 +24292,7 @@ "settings": {}, "uuid": "11eebc42-1710-4ba1-acbf-5c9f813e322d" }, - "2328": { + "2329": { "varname": "mysql_long_queries_timeout", "caption": "MySQL Long Queries: Timeout", "description": "Network timeout in seconds.", @@ -24292,7 +24303,7 @@ }, "uuid": "99cf127b-a182-474a-8859-3d5d423be8d3" }, - "2329": { + "2330": { "varname": "mysql_long_queries_warning", "caption": "MySQL Long Queries: Warning", "description": "Query runtime in seconds that triggers WARN. Supports Nagios ranges. Example: `--warning=15`.", @@ -24303,7 +24314,7 @@ }, "uuid": "c8907efe-2cf9-481c-b498-c60b3b7cbb3d" }, - "2330": { + "2331": { "varname": "mysql_memory_always_ok", "caption": "MySQL Memory: Always OK?", "description": "Always returns OK.", @@ -24312,7 +24323,7 @@ "settings": {}, "uuid": "0e522476-90ef-44ab-9246-c255117f17dc" }, - "2331": { + "2332": { "varname": "mysql_memory_critical", "caption": "MySQL Memory: Critical", "description": "CRIT threshold for the percentage of physical RAM used by the MySQL/MariaDB server processes (RSS). Supports Nagios ranges.", @@ -24323,7 +24334,7 @@ }, "uuid": "72efd326-3a57-4329-a36a-264298002ccd" }, - "2332": { + "2333": { "varname": "mysql_memory_defaults_file", "caption": "MySQL Memory: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -24334,7 +24345,7 @@ }, "uuid": "60d11f3a-81dc-44b0-81d5-3616b7e992f3" }, - "2333": { + "2334": { "varname": "mysql_memory_defaults_group", "caption": "MySQL Memory: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -24345,7 +24356,7 @@ }, "uuid": "aa9260cf-5323-4a74-89f7-f6059badf52e" }, - "2334": { + "2335": { "varname": "mysql_memory_lengthy", "caption": "MySQL Memory: Lengthy?", "description": "Append the breakdown of the calculated worst case to the output, every buffer with its share, largest first.", @@ -24354,7 +24365,7 @@ "settings": {}, "uuid": "57070daa-f181-4ee1-b884-b50bf3b29113" }, - "2335": { + "2336": { "varname": "mysql_memory_no_perfdata", "caption": "MySQL Memory: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -24363,7 +24374,7 @@ "settings": {}, "uuid": "d264dbc8-e226-4588-bd94-c0e38c200b76" }, - "2336": { + "2337": { "varname": "mysql_memory_timeout", "caption": "MySQL Memory: Timeout", "description": "Network timeout in seconds.", @@ -24374,7 +24385,7 @@ }, "uuid": "e75e0344-7b62-4dd4-8460-a7b40777b317" }, - "2337": { + "2338": { "varname": "mysql_memory_warning", "caption": "MySQL Memory: Warning", "description": "WARN threshold for the percentage of physical RAM used by the MySQL/MariaDB server processes (RSS). Supports Nagios ranges.", @@ -24385,7 +24396,7 @@ }, "uuid": "3e9cbd44-abf5-487c-938d-aa09ff7d247d" }, - "2338": { + "2339": { "varname": "mysql_open_files_always_ok", "caption": "MySQL Open Files: Always OK?", "description": "Always returns OK.", @@ -24394,7 +24405,7 @@ "settings": {}, "uuid": "0321561c-bade-45cb-b184-001e35d25d22" }, - "2339": { + "2340": { "varname": "mysql_open_files_critical", "caption": "MySQL Open Files: Critical", "description": "CRIT threshold in percent. Supports Nagios ranges.", @@ -24405,7 +24416,7 @@ }, "uuid": "517e7d09-9f54-49e5-aec2-e2628d5baee1" }, - "2340": { + "2341": { "varname": "mysql_open_files_defaults_file", "caption": "MySQL Open Files: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -24416,7 +24427,7 @@ }, "uuid": "e816e3c0-0016-4475-bee6-a8e58e27f1ec" }, - "2341": { + "2342": { "varname": "mysql_open_files_defaults_group", "caption": "MySQL Open Files: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -24427,7 +24438,7 @@ }, "uuid": "82e101f8-7136-412d-bcdb-2ba9e54e66e3" }, - "2342": { + "2343": { "varname": "mysql_open_files_no_perfdata", "caption": "MySQL Open Files: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -24436,7 +24447,7 @@ "settings": {}, "uuid": "294a9202-a32a-4640-9527-e8c9e7be1429" }, - "2343": { + "2344": { "varname": "mysql_open_files_timeout", "caption": "MySQL Open Files: Timeout", "description": "Network timeout in seconds.", @@ -24447,7 +24458,7 @@ }, "uuid": "ded529b4-02e9-4f8b-80c8-855548d7e165" }, - "2344": { + "2345": { "varname": "mysql_open_files_warning", "caption": "MySQL Open Files: Warning", "description": "WARN threshold in percent. Supports Nagios ranges.", @@ -24458,7 +24469,7 @@ }, "uuid": "258f4358-b9b7-4af0-81be-f4619d3445d3" }, - "2345": { + "2346": { "varname": "mysql_perf_metrics_always_ok", "caption": "MySQL Perf Metrics: Always OK?", "description": "Always returns OK.", @@ -24467,7 +24478,7 @@ "settings": {}, "uuid": "025035bc-4b1a-4525-ace5-7ee8881d27e1" }, - "2346": { + "2347": { "varname": "mysql_perf_metrics_defaults_file", "caption": "MySQL Perf Metrics: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -24478,7 +24489,7 @@ }, "uuid": "f9e8cb2b-cfb3-420a-8830-7b81d2c9483e" }, - "2347": { + "2348": { "varname": "mysql_perf_metrics_defaults_group", "caption": "MySQL Perf Metrics: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -24489,7 +24500,7 @@ }, "uuid": "b7c86cbf-78a5-49f4-bf7b-d904cf876310" }, - "2348": { + "2349": { "varname": "mysql_perf_metrics_ignore_innodb_snapshot_isolation", "caption": "MySQL Perf Metrics: Ignore Innodb Snapshot Isolation?", "description": "Suppress the hint about `innodb_snapshot_isolation` being `OFF` under `REPEATABLE-READ`. The hint never changes the state. Use it where an application connecting to this server cannot retry a transaction that was rolled back with error 1020, so the admin has no way to turn the variable on.", @@ -24498,7 +24509,7 @@ "settings": {}, "uuid": "1610178b-ff25-4693-9300-0f642a4c8934" }, - "2349": { + "2350": { "varname": "mysql_perf_metrics_no_perfdata", "caption": "MySQL Perf Metrics: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -24507,7 +24518,7 @@ "settings": {}, "uuid": "87698750-252a-4bb5-92a0-0d80e71a6dce" }, - "2350": { + "2351": { "varname": "mysql_perf_metrics_storage_type", "caption": "MySQL Perf Metrics: Storage Type", "description": "Storage type of the MySQL data directory. Drives the `innodb_flush_neighbors` and `innodb_io_capacity` checks. `auto` reads `/sys/block/*/queue/rotational` on the same host and feeds `innodb_flush_neighbors` only; `ssd` or `hdd` overrides the detection (use when running from a remote monitoring host via TCP, or on virtualised/network-backed storage such as Ceph or cloud volumes where the rotational flag is unreliable); `skip` disables both storage-type checks entirely. The `innodb_io_capacity` check only runs when `ssd` is set explicitly. Example: `--storage-type=ssd`.", @@ -24520,7 +24531,7 @@ }, "uuid": "6fb9d678-295e-409a-bb38-e072c1bb17aa" }, - "2351": { + "2352": { "varname": "mysql_perf_metrics_timeout", "caption": "MySQL Perf Metrics: Timeout", "description": "Network timeout in seconds.", @@ -24531,7 +24542,7 @@ }, "uuid": "063235dd-3c85-40fd-b2a2-368a875001c3" }, - "2352": { + "2353": { "varname": "mysql_query_always_ok", "caption": "MySQL Query: Always OK?", "description": "Always returns OK.", @@ -24540,7 +24551,7 @@ "settings": {}, "uuid": "21d77f21-f8be-4381-a734-1a1e8c1fe4b2" }, - "2353": { + "2354": { "varname": "mysql_query_critical", "caption": "MySQL Query: Critical", "description": "CRIT threshold as a Nagios range expression.", @@ -24551,7 +24562,7 @@ }, "uuid": "5091d207-b2d7-4c1b-85a4-abe226aa1815" }, - "2354": { + "2355": { "varname": "mysql_query_critical_query", "caption": "MySQL Query: Critical Query", "description": "`SELECT` statement whose result is checked against `--critical`. If the result contains more than one column, the row count is used. Otherwise the single returned value is used.", @@ -24562,7 +24573,7 @@ }, "uuid": "7ffd6c00-5696-47a3-a433-cf6418b21553" }, - "2355": { + "2356": { "varname": "mysql_query_defaults_file", "caption": "MySQL Query: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -24573,7 +24584,7 @@ }, "uuid": "132ebacf-7850-4ebd-a4c3-d36876c6db1b" }, - "2356": { + "2357": { "varname": "mysql_query_defaults_group", "caption": "MySQL Query: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -24584,7 +24595,7 @@ }, "uuid": "fe69b0bd-5776-4a53-8ebc-9d42b85b809a" }, - "2357": { + "2358": { "varname": "mysql_query_no_perfdata", "caption": "MySQL Query: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -24593,7 +24604,7 @@ "settings": {}, "uuid": "6ec786ef-a3da-4385-a665-692fe6688177" }, - "2358": { + "2359": { "varname": "mysql_query_timeout", "caption": "MySQL Query: Timeout", "description": "Network timeout in seconds.", @@ -24604,7 +24615,7 @@ }, "uuid": "4123f819-0b61-4470-94f7-e3b985f54022" }, - "2359": { + "2360": { "varname": "mysql_query_warning", "caption": "MySQL Query: Warning", "description": "WARN threshold as a Nagios range expression.", @@ -24615,7 +24626,7 @@ }, "uuid": "f70370e0-3256-4be4-8df8-12f8065f3785" }, - "2360": { + "2361": { "varname": "mysql_query_warning_query", "caption": "MySQL Query: Warning Query", "description": "`SELECT` statement whose result is checked against `--warning`. If the result contains more than one column, the row count is used. Otherwise the single returned value is used.", @@ -24626,7 +24637,7 @@ }, "uuid": "e058df57-4efa-4d1d-be7e-aec1d04f43c1" }, - "2361": { + "2362": { "varname": "mysql_replica_status_always_ok", "caption": "MySQL Replica Status: Always OK?", "description": "Always returns OK.", @@ -24635,7 +24646,7 @@ "settings": {}, "uuid": "67fee737-5a8b-48a6-b7b2-a7ce7ca62443" }, - "2362": { + "2363": { "varname": "mysql_replica_status_defaults_file", "caption": "MySQL Replica Status: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -24646,7 +24657,7 @@ }, "uuid": "3e09ed8d-685e-4a4b-a164-4bb7a4c83736" }, - "2363": { + "2364": { "varname": "mysql_replica_status_defaults_group", "caption": "MySQL Replica Status: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -24657,7 +24668,7 @@ }, "uuid": "8ad41feb-dd49-4118-a4db-7e87cd441c5a" }, - "2364": { + "2365": { "varname": "mysql_replica_status_lag_critical", "caption": "MySQL Replica Status: Lag Critical", "description": "Seconds of replication lag at which the CRIT flag is raised. If omitted, lag never escalates to CRIT.", @@ -24668,7 +24679,7 @@ }, "uuid": "4f598eb4-4c3f-457b-8583-90d075f98a04" }, - "2365": { + "2366": { "varname": "mysql_replica_status_lag_warning", "caption": "MySQL Replica Status: Lag Warning", "description": "Seconds of replication lag at which the WARN flag is raised. A value of 0 means any lag (the historic default; matches the mysqltuner cut-off).", @@ -24679,7 +24690,7 @@ }, "uuid": "90e591bf-765a-496a-a887-7cfa0a858a13" }, - "2366": { + "2367": { "varname": "mysql_replica_status_no_perfdata", "caption": "MySQL Replica Status: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -24688,7 +24699,7 @@ "settings": {}, "uuid": "726d5c13-56d5-400a-b0d4-9709fd5b8a37" }, - "2367": { + "2368": { "varname": "mysql_replica_status_severity", "caption": "MySQL Replica Status: Severity", "description": "Severity for alerts that do not depend on thresholds (IO/SQL thread not running, `read_only` disabled). One of `warn` or `crit`.", @@ -24701,7 +24712,7 @@ }, "uuid": "3485cc0b-4fe0-4598-b318-d99575b40b33" }, - "2368": { + "2369": { "varname": "mysql_replica_status_timeout", "caption": "MySQL Replica Status: Timeout", "description": "Network timeout in seconds.", @@ -24712,7 +24723,7 @@ }, "uuid": "ee1cdc0b-c862-44c8-b038-a1cd9cb30364" }, - "2369": { + "2370": { "varname": "mysql_slow_queries_always_ok", "caption": "MySQL Slow Queries: Always OK?", "description": "Always returns OK.", @@ -24721,7 +24732,7 @@ "settings": {}, "uuid": "6c4b8916-d307-456f-8302-23f81843478f" }, - "2370": { + "2371": { "varname": "mysql_slow_queries_critical", "caption": "MySQL Slow Queries: Critical", "description": "CRIT threshold in percent. Supports Nagios ranges.", @@ -24732,7 +24743,7 @@ }, "uuid": "bf096875-eb52-4aa9-b13c-2edc68e244f7" }, - "2371": { + "2372": { "varname": "mysql_slow_queries_defaults_file", "caption": "MySQL Slow Queries: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -24743,7 +24754,7 @@ }, "uuid": "ee014f3e-3905-4e98-920a-5df3ed790526" }, - "2372": { + "2373": { "varname": "mysql_slow_queries_defaults_group", "caption": "MySQL Slow Queries: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -24754,7 +24765,7 @@ }, "uuid": "458e792a-3ec6-4375-93b6-483a7f565b1e" }, - "2373": { + "2374": { "varname": "mysql_slow_queries_no_perfdata", "caption": "MySQL Slow Queries: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -24763,7 +24774,7 @@ "settings": {}, "uuid": "7aa2be7e-2289-4ffb-b20a-c9fbf8ed2012" }, - "2374": { + "2375": { "varname": "mysql_slow_queries_timeout", "caption": "MySQL Slow Queries: Timeout", "description": "Network timeout in seconds.", @@ -24774,7 +24785,7 @@ }, "uuid": "339679bc-a12c-4849-a1b7-7092278ddbd8" }, - "2375": { + "2376": { "varname": "mysql_slow_queries_warning", "caption": "MySQL Slow Queries: Warning", "description": "WARN threshold in percent. Supports Nagios ranges.", @@ -24785,7 +24796,7 @@ }, "uuid": "6a2110c8-7241-496d-9210-1468e25a54a9" }, - "2376": { + "2377": { "varname": "mysql_sorts_always_ok", "caption": "MySQL Sorts: Always OK?", "description": "Always returns OK.", @@ -24794,7 +24805,7 @@ "settings": {}, "uuid": "f4d9bab7-3c69-478f-810f-5852381e9474" }, - "2377": { + "2378": { "varname": "mysql_sorts_critical", "caption": "MySQL Sorts: Critical", "description": "CRIT threshold in percent. Supports Nagios ranges.", @@ -24805,7 +24816,7 @@ }, "uuid": "60fcfa8d-2775-4a5a-b753-c591ab373d56" }, - "2378": { + "2379": { "varname": "mysql_sorts_defaults_file", "caption": "MySQL Sorts: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -24816,7 +24827,7 @@ }, "uuid": "2f766485-4a0b-4c8a-bd13-5c1f9259caee" }, - "2379": { + "2380": { "varname": "mysql_sorts_defaults_group", "caption": "MySQL Sorts: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -24827,7 +24838,7 @@ }, "uuid": "51e1bec5-99ee-4ef6-969f-77300b952a45" }, - "2380": { + "2381": { "varname": "mysql_sorts_no_perfdata", "caption": "MySQL Sorts: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -24836,7 +24847,7 @@ "settings": {}, "uuid": "b7454f89-5938-488b-a952-c3f99899dee0" }, - "2381": { + "2382": { "varname": "mysql_sorts_timeout", "caption": "MySQL Sorts: Timeout", "description": "Network timeout in seconds.", @@ -24847,7 +24858,7 @@ }, "uuid": "40aca3cf-6dea-45f6-a653-4aa4fee6cb9d" }, - "2382": { + "2383": { "varname": "mysql_sorts_warning", "caption": "MySQL Sorts: Warning", "description": "WARN threshold in percent. Supports Nagios ranges.", @@ -24858,7 +24869,7 @@ }, "uuid": "6cd508a0-ddae-4815-976b-93d6b20a8ab0" }, - "2383": { + "2384": { "varname": "mysql_storage_engines_always_ok", "caption": "MySQL Storage Engines: Always OK?", "description": "Always returns OK.", @@ -24867,7 +24878,7 @@ "settings": {}, "uuid": "7decf2b3-5e9b-4ffb-a1d3-0df2da33b403" }, - "2384": { + "2385": { "varname": "mysql_storage_engines_critical_autoincrement_pct", "caption": "MySQL Storage Engines: Critical Autoincrement Pct", "description": "CRIT threshold for the percentage of the column-type maximum an `AUTO_INCREMENT` value uses. Supports Nagios ranges.", @@ -24878,7 +24889,7 @@ }, "uuid": "2d6ffd73-a4be-4fce-8476-8f922a80f8e8" }, - "2385": { + "2386": { "varname": "mysql_storage_engines_critical_fragmented_tables", "caption": "MySQL Storage Engines: Critical Fragmented Tables", "description": "CRIT threshold for the number of fragmented tables. Supports Nagios ranges.", @@ -24889,7 +24900,7 @@ }, "uuid": "37f7947d-f799-4a4a-bf29-9945a2bf6ed9" }, - "2386": { + "2387": { "varname": "mysql_storage_engines_defaults_file", "caption": "MySQL Storage Engines: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -24900,7 +24911,7 @@ }, "uuid": "4642987c-370b-45ad-9b28-cff4d60f6cb3" }, - "2387": { + "2388": { "varname": "mysql_storage_engines_defaults_group", "caption": "MySQL Storage Engines: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -24911,7 +24922,7 @@ }, "uuid": "5f5bf9dc-2db9-4534-80ee-5d8fe6d644b4" }, - "2388": { + "2389": { "varname": "mysql_storage_engines_ignore", "caption": "MySQL Storage Engines: Ignore", "description": "Ignore tables whose name matches this Python regular expression. Matched against the fully qualified table identifier `schema.table`, so one pattern can drop a whole schema or a single table. Excluded tables contribute to no aggregate and to no check. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times.", @@ -24922,7 +24933,7 @@ }, "uuid": "fdf50ac4-dfd9-408b-b966-4914d90874e8" }, - "2389": { + "2390": { "varname": "mysql_storage_engines_lengthy", "caption": "MySQL Storage Engines: Lengthy?", "description": "Extended reporting.", @@ -24931,7 +24942,7 @@ "settings": {}, "uuid": "850de6d6-8c1c-4a98-931f-5cd9e95437ab" }, - "2390": { + "2391": { "varname": "mysql_storage_engines_match", "caption": "MySQL Storage Engines: Match", "description": "Only check tables whose name matches this Python regular expression. Matched against the fully qualified table identifier `schema.table`. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second).", @@ -24942,7 +24953,7 @@ }, "uuid": "f180e220-fa51-489c-9d81-de4ae5efe736" }, - "2391": { + "2392": { "varname": "mysql_storage_engines_no_perfdata", "caption": "MySQL Storage Engines: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -24951,7 +24962,7 @@ "settings": {}, "uuid": "3daa83a9-7866-49d3-9dcf-db251f72d895" }, - "2392": { + "2393": { "varname": "mysql_storage_engines_timeout", "caption": "MySQL Storage Engines: Timeout", "description": "Network timeout in seconds.", @@ -24962,7 +24973,7 @@ }, "uuid": "cd4ae009-6be7-4a46-b730-9d790ba98b5f" }, - "2393": { + "2394": { "varname": "mysql_storage_engines_warning_autoincrement_pct", "caption": "MySQL Storage Engines: Warning Autoincrement Pct", "description": "WARN threshold for the percentage of the column-type maximum an `AUTO_INCREMENT` value uses. Supports Nagios ranges.", @@ -24973,7 +24984,7 @@ }, "uuid": "a2ee2ef0-119e-4b59-899b-dd64e90e4d23" }, - "2394": { + "2395": { "varname": "mysql_storage_engines_warning_fragmented_tables", "caption": "MySQL Storage Engines: Warning Fragmented Tables", "description": "WARN threshold for the number of fragmented tables. Supports Nagios ranges.", @@ -24984,7 +24995,7 @@ }, "uuid": "a0763ca4-06bf-4ebb-bcfb-d6a654a39d73" }, - "2395": { + "2396": { "varname": "mysql_system_always_ok", "caption": "MySQL System: Always OK?", "description": "Always returns OK.", @@ -24993,7 +25004,7 @@ "settings": {}, "uuid": "8b3ef1f7-2bb5-41ad-ad1a-db873f97a647" }, - "2396": { + "2397": { "varname": "mysql_system_maxportsallowed", "caption": "MySQL System: Maxportsallowed", "description": "Maximum number of TCP ports listening on this host. 0 disables the check.", @@ -25004,7 +25015,7 @@ }, "uuid": "887e4d60-f37d-4ad2-b574-137d90873e9e" }, - "2397": { + "2398": { "varname": "mysql_system_no_perfdata", "caption": "MySQL System: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -25013,7 +25024,7 @@ "settings": {}, "uuid": "8cedd407-ac82-43ba-9680-891c72abdea1" }, - "2398": { + "2399": { "varname": "mysql_table_cache_always_ok", "caption": "MySQL Table Cache: Always OK?", "description": "Always returns OK.", @@ -25022,7 +25033,7 @@ "settings": {}, "uuid": "e9ea99e0-f27f-488c-8798-62f1b5e01664" }, - "2399": { + "2400": { "varname": "mysql_table_cache_critical", "caption": "MySQL Table Cache: Critical", "description": "CRIT threshold in percent. Supports Nagios ranges.", @@ -25033,7 +25044,7 @@ }, "uuid": "e7cdb7af-cf2e-47d9-8dc2-331bcdf4b9f4" }, - "2400": { + "2401": { "varname": "mysql_table_cache_defaults_file", "caption": "MySQL Table Cache: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -25044,7 +25055,7 @@ }, "uuid": "5666cf39-5076-4f1f-9673-c409ff884acd" }, - "2401": { + "2402": { "varname": "mysql_table_cache_defaults_group", "caption": "MySQL Table Cache: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -25055,7 +25066,7 @@ }, "uuid": "8867296d-9a65-453d-be72-59e7ea4c2b38" }, - "2402": { + "2403": { "varname": "mysql_table_cache_no_perfdata", "caption": "MySQL Table Cache: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -25064,7 +25075,7 @@ "settings": {}, "uuid": "10c94fa6-6eb8-4b74-aa6c-af732228ca8e" }, - "2403": { + "2404": { "varname": "mysql_table_cache_timeout", "caption": "MySQL Table Cache: Timeout", "description": "Network timeout in seconds.", @@ -25075,7 +25086,7 @@ }, "uuid": "8603e7d9-fabd-4857-b036-a66446fb7d7d" }, - "2404": { + "2405": { "varname": "mysql_table_cache_warning", "caption": "MySQL Table Cache: Warning", "description": "WARN threshold in percent. Supports Nagios ranges.", @@ -25086,7 +25097,7 @@ }, "uuid": "64f9f07f-a01f-4d07-9d40-f63aa3ee4d57" }, - "2405": { + "2406": { "varname": "mysql_table_definition_cache_always_ok", "caption": "MySQL Table Definition Cache: Always OK?", "description": "Always returns OK.", @@ -25095,7 +25106,7 @@ "settings": {}, "uuid": "deacc7b3-5836-4ce9-b051-e806e11cbb12" }, - "2406": { + "2407": { "varname": "mysql_table_definition_cache_defaults_file", "caption": "MySQL Table Definition Cache: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -25106,7 +25117,7 @@ }, "uuid": "38e728c5-1a4a-400e-b838-edaef468c9eb" }, - "2407": { + "2408": { "varname": "mysql_table_definition_cache_defaults_group", "caption": "MySQL Table Definition Cache: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -25117,7 +25128,7 @@ }, "uuid": "57ba93a2-da47-4e2e-aed5-e2c3a320360f" }, - "2408": { + "2409": { "varname": "mysql_table_definition_cache_no_perfdata", "caption": "MySQL Table Definition Cache: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -25126,7 +25137,7 @@ "settings": {}, "uuid": "b432fea4-dff4-4066-8b38-2edc6140bb06" }, - "2409": { + "2410": { "varname": "mysql_table_definition_cache_timeout", "caption": "MySQL Table Definition Cache: Timeout", "description": "Network timeout in seconds.", @@ -25137,7 +25148,7 @@ }, "uuid": "fbcd2e83-bb3c-4423-8aab-6c4c4719a532" }, - "2410": { + "2411": { "varname": "mysql_table_indexes_always_ok", "caption": "MySQL Table Indexes: Always OK?", "description": "Always returns OK.", @@ -25146,7 +25157,7 @@ "settings": {}, "uuid": "aa829cc6-7ed8-4fdb-897a-2a6ff4edab28" }, - "2411": { + "2412": { "varname": "mysql_table_indexes_critical", "caption": "MySQL Table Indexes: Critical", "description": "CRIT threshold for the number of bad tables (per category: missing indexes / missing primary key). Supports Nagios ranges.", @@ -25157,7 +25168,7 @@ }, "uuid": "f3eb9fe4-c287-44d8-89d0-a6356b6a5532" }, - "2412": { + "2413": { "varname": "mysql_table_indexes_defaults_file", "caption": "MySQL Table Indexes: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -25168,7 +25179,7 @@ }, "uuid": "7f56dd88-045c-4380-b096-057c912366fa" }, - "2413": { + "2414": { "varname": "mysql_table_indexes_defaults_group", "caption": "MySQL Table Indexes: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -25179,7 +25190,7 @@ }, "uuid": "0f4df9d4-300d-4b33-afa8-19b328999462" }, - "2414": { + "2415": { "varname": "mysql_table_indexes_ignore", "caption": "MySQL Table Indexes: Ignore", "description": "Ignore tables whose name matches this Python regular expression. Matched against the fully qualified table identifier `schema.table`, so one pattern can drop a whole schema or a single table. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times.", @@ -25190,7 +25201,7 @@ }, "uuid": "047cfbd3-0b69-4228-89e5-ac1e31767a36" }, - "2415": { + "2416": { "varname": "mysql_table_indexes_lengthy", "caption": "MySQL Table Indexes: Lengthy?", "description": "Extended reporting.", @@ -25199,7 +25210,7 @@ "settings": {}, "uuid": "bba3353d-8bb1-4578-95da-59ae56f7f0f5" }, - "2416": { + "2417": { "varname": "mysql_table_indexes_match", "caption": "MySQL Table Indexes: Match", "description": "Only check tables whose name matches this Python regular expression. Matched against the fully qualified table identifier `schema.table`. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second).", @@ -25210,7 +25221,7 @@ }, "uuid": "99948c2a-c4d1-44eb-8667-cf5c56398a22" }, - "2417": { + "2418": { "varname": "mysql_table_indexes_no_perfdata", "caption": "MySQL Table Indexes: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -25219,7 +25230,7 @@ "settings": {}, "uuid": "0e6339b4-2967-437a-89df-cade3e30b1c0" }, - "2418": { + "2419": { "varname": "mysql_table_indexes_timeout", "caption": "MySQL Table Indexes: Timeout", "description": "Network timeout in seconds.", @@ -25230,7 +25241,7 @@ }, "uuid": "017c2536-9405-4bef-9af9-91d3c2b467eb" }, - "2419": { + "2420": { "varname": "mysql_table_indexes_warning", "caption": "MySQL Table Indexes: Warning", "description": "WARN threshold for the number of bad tables (per category: missing indexes / missing primary key). Supports Nagios ranges.", @@ -25241,7 +25252,7 @@ }, "uuid": "93351ff7-9fe7-498b-8d73-4f88aaf4b54f" }, - "2420": { + "2421": { "varname": "mysql_table_locks_always_ok", "caption": "MySQL Table Locks: Always OK?", "description": "Always returns OK.", @@ -25250,7 +25261,7 @@ "settings": {}, "uuid": "3f0e3a07-a451-42b3-a7df-fb40f439d290" }, - "2421": { + "2422": { "varname": "mysql_table_locks_critical", "caption": "MySQL Table Locks: Critical", "description": "CRIT threshold in percent. Supports Nagios ranges.", @@ -25261,7 +25272,7 @@ }, "uuid": "411b3fb0-aa3f-43d6-a114-4d1589a918d7" }, - "2422": { + "2423": { "varname": "mysql_table_locks_defaults_file", "caption": "MySQL Table Locks: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -25272,7 +25283,7 @@ }, "uuid": "a1fcb4e6-644b-4ec8-bace-b84d0ed9adb9" }, - "2423": { + "2424": { "varname": "mysql_table_locks_defaults_group", "caption": "MySQL Table Locks: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -25283,7 +25294,7 @@ }, "uuid": "84835328-ed64-4e76-9f33-fd60f69f74fa" }, - "2424": { + "2425": { "varname": "mysql_table_locks_no_perfdata", "caption": "MySQL Table Locks: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -25292,7 +25303,7 @@ "settings": {}, "uuid": "735ceadd-6125-4d5c-9eb7-599eecf7b954" }, - "2425": { + "2426": { "varname": "mysql_table_locks_timeout", "caption": "MySQL Table Locks: Timeout", "description": "Network timeout in seconds.", @@ -25303,7 +25314,7 @@ }, "uuid": "42ae07b6-3d6b-43b4-823f-b8027acc94f6" }, - "2426": { + "2427": { "varname": "mysql_table_locks_warning", "caption": "MySQL Table Locks: Warning", "description": "WARN threshold in percent. Supports Nagios ranges.", @@ -25314,7 +25325,7 @@ }, "uuid": "cafb8ec7-d91d-4a70-9784-0b2be8147e6d" }, - "2427": { + "2428": { "varname": "mysql_temp_tables_always_ok", "caption": "MySQL Temp Tables: Always OK?", "description": "Always returns OK.", @@ -25323,7 +25334,7 @@ "settings": {}, "uuid": "d1420ef6-21a9-462a-885c-5c5859d2dfae" }, - "2428": { + "2429": { "varname": "mysql_temp_tables_critical", "caption": "MySQL Temp Tables: Critical", "description": "CRIT threshold in percent. Supports Nagios ranges. Example: `--critical=50`. Default: not evaluated, the percentage is only reported.", @@ -25334,7 +25345,7 @@ }, "uuid": "7dcf4095-f9d6-4378-b841-b740c0fe4a86" }, - "2429": { + "2430": { "varname": "mysql_temp_tables_defaults_file", "caption": "MySQL Temp Tables: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -25345,7 +25356,7 @@ }, "uuid": "dd875ca6-290a-4034-9d83-59c67304707d" }, - "2430": { + "2431": { "varname": "mysql_temp_tables_defaults_group", "caption": "MySQL Temp Tables: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -25356,7 +25367,7 @@ }, "uuid": "8dc8bd78-6d93-40ae-ae7b-f555ad7d4754" }, - "2431": { + "2432": { "varname": "mysql_temp_tables_no_perfdata", "caption": "MySQL Temp Tables: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -25365,7 +25376,7 @@ "settings": {}, "uuid": "bc7e7889-663f-4358-9845-d9ecf610aac4" }, - "2432": { + "2433": { "varname": "mysql_temp_tables_timeout", "caption": "MySQL Temp Tables: Timeout", "description": "Network timeout in seconds.", @@ -25376,7 +25387,7 @@ }, "uuid": "8fb139d8-280b-4a2a-8a19-5176361c39dd" }, - "2433": { + "2434": { "varname": "mysql_temp_tables_warning", "caption": "MySQL Temp Tables: Warning", "description": "WARN threshold in percent. Supports Nagios ranges. Example: `--warning=25`. Default: not evaluated, the percentage is only reported.", @@ -25387,7 +25398,7 @@ }, "uuid": "0590cc0b-b7f1-49ea-9b3e-8da14891e486" }, - "2434": { + "2435": { "varname": "mysql_thread_cache_always_ok", "caption": "MySQL Thread Cache: Always OK?", "description": "Always returns OK.", @@ -25396,7 +25407,7 @@ "settings": {}, "uuid": "4e3c44b6-c2f3-4cbe-934f-047dcee9d306" }, - "2435": { + "2436": { "varname": "mysql_thread_cache_critical", "caption": "MySQL Thread Cache: Critical", "description": "CRIT threshold in percent. Supports Nagios ranges.", @@ -25407,7 +25418,7 @@ }, "uuid": "6f0fe697-f5df-4051-a8d0-15ac12022c34" }, - "2436": { + "2437": { "varname": "mysql_thread_cache_defaults_file", "caption": "MySQL Thread Cache: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -25418,7 +25429,7 @@ }, "uuid": "47b07bba-3b2c-4ee8-b145-4f3484028a6f" }, - "2437": { + "2438": { "varname": "mysql_thread_cache_defaults_group", "caption": "MySQL Thread Cache: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -25429,7 +25440,7 @@ }, "uuid": "c2793088-5a87-4c03-9085-731e9e55582d" }, - "2438": { + "2439": { "varname": "mysql_thread_cache_no_perfdata", "caption": "MySQL Thread Cache: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -25438,7 +25449,7 @@ "settings": {}, "uuid": "380f573d-4d7e-44b9-a50b-52f2a650d000" }, - "2439": { + "2440": { "varname": "mysql_thread_cache_timeout", "caption": "MySQL Thread Cache: Timeout", "description": "Network timeout in seconds.", @@ -25449,7 +25460,7 @@ }, "uuid": "bd2d9bbf-3d64-4621-a767-cc6e81a22140" }, - "2440": { + "2441": { "varname": "mysql_thread_cache_warning", "caption": "MySQL Thread Cache: Warning", "description": "WARN threshold in percent. Supports Nagios ranges.", @@ -25460,7 +25471,7 @@ }, "uuid": "20d8e816-5b01-4cd3-9d23-877920f492f3" }, - "2441": { + "2442": { "varname": "mysql_tls_always_ok", "caption": "MySQL TLS: Always OK?", "description": "Always returns OK.", @@ -25469,7 +25480,7 @@ "settings": {}, "uuid": "ff9020a7-5b24-4b97-a89f-c959e599451a" }, - "2442": { + "2443": { "varname": "mysql_tls_critical", "caption": "MySQL TLS: Critical", "description": "Days until local `ssl_cert` / `ssl_ca` expiry that trigger CRIT. Supports Nagios ranges. Example: `--critical=14:`.", @@ -25480,7 +25491,7 @@ }, "uuid": "6c855617-7d17-4977-a1a2-94407c103dfb" }, - "2443": { + "2444": { "varname": "mysql_tls_defaults_file", "caption": "MySQL TLS: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -25491,7 +25502,7 @@ }, "uuid": "46d82a3c-1eb8-4595-9163-37bd0b34e4b3" }, - "2444": { + "2445": { "varname": "mysql_tls_defaults_group", "caption": "MySQL TLS: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -25502,7 +25513,7 @@ }, "uuid": "dab3e19d-f997-4c9f-9358-24a19bde7cbd" }, - "2445": { + "2446": { "varname": "mysql_tls_no_perfdata", "caption": "MySQL TLS: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -25511,7 +25522,7 @@ "settings": {}, "uuid": "5e768709-69bd-4c26-9a30-edb965023c5f" }, - "2446": { + "2447": { "varname": "mysql_tls_severity", "caption": "MySQL TLS: Severity", "description": "Severity for the threshold-less TLS findings (session not encrypted, `have_ssl=DISABLED`, `require_secure_transport=OFF`, weak TLS versions, missing cert/key, remote users without `REQUIRE SSL`). One of `warn` or `crit`.", @@ -25524,7 +25535,7 @@ }, "uuid": "ebf0c8a5-0299-4946-96f0-75eea2b85524" }, - "2447": { + "2448": { "varname": "mysql_tls_timeout", "caption": "MySQL TLS: Timeout", "description": "Network timeout in seconds.", @@ -25535,7 +25546,7 @@ }, "uuid": "2458aded-dee3-4d87-ae00-4010c97bcd14" }, - "2448": { + "2449": { "varname": "mysql_tls_warning", "caption": "MySQL TLS: Warning", "description": "Days until local `ssl_cert` / `ssl_ca` expiry that trigger WARN. Supports Nagios ranges. Example: `--warning=60:`.", @@ -25546,7 +25557,7 @@ }, "uuid": "0a549772-3a34-4def-abc9-1060dfd16542" }, - "2449": { + "2450": { "varname": "mysql_traffic_always_ok", "caption": "MySQL Traffic: Always OK?", "description": "Always returns OK.", @@ -25555,7 +25566,7 @@ "settings": {}, "uuid": "03e247f0-1616-49da-b9bf-35b764111f3a" }, - "2450": { + "2451": { "varname": "mysql_traffic_defaults_file", "caption": "MySQL Traffic: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -25566,7 +25577,7 @@ }, "uuid": "319ab0f3-fdfd-4edd-9722-7fc9487d5ade" }, - "2451": { + "2452": { "varname": "mysql_traffic_defaults_group", "caption": "MySQL Traffic: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -25577,7 +25588,7 @@ }, "uuid": "f1b00bf7-a92f-472d-9e63-3901fc3ce459" }, - "2452": { + "2453": { "varname": "mysql_traffic_no_perfdata", "caption": "MySQL Traffic: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -25586,7 +25597,7 @@ "settings": {}, "uuid": "f12229c6-1743-4fe2-80c6-494c5a362796" }, - "2453": { + "2454": { "varname": "mysql_traffic_timeout", "caption": "MySQL Traffic: Timeout", "description": "Network timeout in seconds.", @@ -25597,7 +25608,7 @@ }, "uuid": "a18b2d72-77fc-4bdd-a072-638dd85e0470" }, - "2454": { + "2455": { "varname": "mysql_user_security_always_ok", "caption": "MySQL User Security: Always OK?", "description": "Always returns OK.", @@ -25606,7 +25617,7 @@ "settings": {}, "uuid": "d25dfda9-fc4a-4f9e-8fc4-8fb8d56e61fd" }, - "2455": { + "2456": { "varname": "mysql_user_security_defaults_file", "caption": "MySQL User Security: Defaults File", "description": "MySQL/MariaDB cnf file to read user, host and password from. Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -25617,7 +25628,7 @@ }, "uuid": "45ba39bb-ab05-4a7c-a322-5d7c5ab84519" }, - "2456": { + "2457": { "varname": "mysql_user_security_defaults_group", "caption": "MySQL User Security: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -25628,7 +25639,7 @@ }, "uuid": "42ae6f09-bce0-4f1d-893d-cb975b1f0971" }, - "2457": { + "2458": { "varname": "mysql_user_security_no_perfdata", "caption": "MySQL User Security: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -25637,7 +25648,7 @@ "settings": {}, "uuid": "a256d56c-cc96-4beb-aefc-4c324faf8fc7" }, - "2458": { + "2459": { "varname": "mysql_user_security_severity", "caption": "MySQL User Security: Severity", "description": "Severity for the threshold-less security findings (anonymous accounts, empty passwords, weak passwords, wildcard hosts). One of `warn` or `crit`.", @@ -25650,7 +25661,7 @@ }, "uuid": "93fa503d-ec04-4d17-812a-ca4ebe45802e" }, - "2459": { + "2460": { "varname": "mysql_user_security_timeout", "caption": "MySQL User Security: Timeout", "description": "Network timeout in seconds.", @@ -25661,7 +25672,7 @@ }, "uuid": "ccd39c1f-bd3c-4816-8246-bc2f3f7c4bb5" }, - "2460": { + "2461": { "varname": "mysql_version_always_ok", "caption": "MySQL Version: Always OK?", "description": "Always returns OK.", @@ -25670,7 +25681,7 @@ "settings": {}, "uuid": "e241b9ad-9bcb-4535-ba01-d30e04532a96" }, - "2461": { + "2462": { "varname": "mysql_version_check_major", "caption": "MySQL Version: Check Major?", "description": "Alert when a new major release is available, even if the current version is not yet EOL. Example: running v26 (not yet EOL) and v27 is available.", @@ -25679,7 +25690,7 @@ "settings": {}, "uuid": "77d94983-4a7e-4609-b442-c9fbb6caf848" }, - "2462": { + "2463": { "varname": "mysql_version_check_minor", "caption": "MySQL Version: Check Minor?", "description": "Alert when a new major.minor release is available, even if the current version is not yet EOL. Example: running v26.2 (not yet EOL) and v26.3 is available.", @@ -25688,7 +25699,7 @@ "settings": {}, "uuid": "b4961a1c-f2e9-4047-959b-b4d53ea79b15" }, - "2463": { + "2464": { "varname": "mysql_version_check_patch", "caption": "MySQL Version: Check Patch?", "description": "Alert when a new major.minor.patch release is available, even if the current version is not yet EOL. Example: running v26.2.7 (not yet EOL) and v26.2.8 is available.", @@ -25697,7 +25708,7 @@ "settings": {}, "uuid": "0234c676-3ebb-4d0c-9e17-443c90851ed4" }, - "2464": { + "2465": { "varname": "mysql_version_insecure", "caption": "MySQL Version: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -25706,7 +25717,7 @@ "settings": {}, "uuid": "c858ab4b-d7e7-4b1f-af96-76c69647de16" }, - "2465": { + "2466": { "varname": "mysql_version_no_perfdata", "caption": "MySQL Version: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -25715,7 +25726,7 @@ "settings": {}, "uuid": "2afc1671-8f27-489f-8dbf-ecba3dd79d37" }, - "2466": { + "2467": { "varname": "mysql_version_no_proxy", "caption": "MySQL Version: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -25724,7 +25735,7 @@ "settings": {}, "uuid": "7dfd9a41-207f-46de-aed3-6b2a51fceded" }, - "2467": { + "2468": { "varname": "mysql_version_offset_eol", "caption": "MySQL Version: Offset Eol", "description": "Alert n days before (\"-30\") or after an EOL date (\"30\" or \"+30\").", @@ -25735,7 +25746,7 @@ }, "uuid": "dfefad84-0b83-49ed-b96a-e19a7e7d0e75" }, - "2468": { + "2469": { "varname": "mysql_version_proxy", "caption": "MySQL Version: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -25746,7 +25757,7 @@ }, "uuid": "c48f19dd-e29e-4038-bfb3-9c71157efc7d" }, - "2469": { + "2470": { "varname": "mysql_version_timeout", "caption": "MySQL Version: Timeout", "description": "Network timeout in seconds.", @@ -25757,7 +25768,7 @@ }, "uuid": "09c0d9fe-1b2e-4585-b366-b586f7f6c086" }, - "2470": { + "2471": { "varname": "mysql_version_unreachable_severity", "caption": "MySQL Version: Unreachable Severity", "description": "State to report when the online source is unreachable. What is used instead - bundled offline data, a cached copy, or nothing at all - is named in the output, and a clean result then only covers what that fallback could confirm.", @@ -25770,7 +25781,7 @@ }, "uuid": "77767185-90b3-4acb-9f76-9bf2b8cf91d6" }, - "2471": { + "2472": { "varname": "needs_restarting_always_ok", "caption": "Needs Restarting: Always OK?", "description": "Always returns OK.", @@ -25779,7 +25790,7 @@ "settings": {}, "uuid": "dda5aeae-326b-4ee7-9738-653c06c9569d" }, - "2472": { + "2473": { "varname": "needs_restarting_grace_wait", "caption": "Needs Restarting: Grace Wait", "description": "How long a pending restart is tolerated before it counts towards the state. Set this to cover the time a host needs between taking its updates and rebooting, so a machine that is already scheduled for a reboot stays quiet until it has had its chance. Starts when the pending restart is first seen, separately for the reboot and for each service, and starts over once that entry is gone. A duration such as `12h`, `8D` or `2W`; `0D` disables the grace period.", @@ -25790,7 +25801,7 @@ }, "uuid": "b91e93cc-5506-45f0-9e6b-bc60b46c981a" }, - "2473": { + "2474": { "varname": "needs_restarting_timeout", "caption": "Needs Restarting: Timeout", "description": "Network timeout in seconds.", @@ -25801,7 +25812,7 @@ }, "uuid": "1857296f-db88-4a67-b8a5-85141ff274ba" }, - "2474": { + "2475": { "varname": "network_bonding_always_ok", "caption": "Network Bonding: Always OK?", "description": "Always returns OK.", @@ -25810,7 +25821,7 @@ "settings": {}, "uuid": "f64dc525-7d53-431e-9972-239272711cd7" }, - "2475": { + "2476": { "varname": "network_bonding_no_perfdata", "caption": "Network Bonding: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -25819,7 +25830,7 @@ "settings": {}, "uuid": "220b426d-8f28-4551-98a7-282c7223a419" }, - "2476": { + "2477": { "varname": "network_connections_always_ok", "caption": "Network Connections: Always OK?", "description": "Always returns OK.", @@ -25828,7 +25839,7 @@ "settings": {}, "uuid": "7f04804b-51b4-406e-84f8-7308d9bf4e8e" }, - "2477": { + "2478": { "varname": "network_connections_conn_status", "caption": "Network Connections: Conn Status", "description": "Filter connections by status. Can be specified multiple times. Default: all.", @@ -25841,7 +25852,7 @@ }, "uuid": "b8ad1ad2-8785-4085-9dc3-663a89dc7a7f" }, - "2478": { + "2479": { "varname": "network_connections_conn_type", "caption": "Network Connections: Conn Type", "description": "Filter connections by family/type. Can be specified multiple times. Default: all.", @@ -25854,7 +25865,7 @@ }, "uuid": "b26adf69-cac9-46ff-befd-7d883b03d686" }, - "2479": { + "2480": { "varname": "network_connections_critical", "caption": "Network Connections: Critical", "description": "CRIT threshold for the number of connections.", @@ -25865,7 +25876,7 @@ }, "uuid": "01a55234-93ae-4d3d-a60c-88fe3ecfc095" }, - "2480": { + "2481": { "varname": "network_connections_no_perfdata", "caption": "Network Connections: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -25874,7 +25885,7 @@ "settings": {}, "uuid": "ee007da6-fe43-4745-87b6-c168c109ceb3" }, - "2481": { + "2482": { "varname": "network_connections_warning", "caption": "Network Connections: Warning", "description": "WARN threshold for the number of connections.", @@ -25885,7 +25896,7 @@ }, "uuid": "2f4e66ee-b213-4ec2-b5aa-0e27dddcb5bc" }, - "2482": { + "2483": { "varname": "network_connections_windows_always_ok", "caption": "Network Connections: Always OK?", "description": "Always returns OK.", @@ -25894,7 +25905,7 @@ "settings": {}, "uuid": "9e99f15d-39cd-4fbf-98d0-a710d6a8f0c9" }, - "2483": { + "2484": { "varname": "network_connections_windows_conn_status", "caption": "Network Connections: Conn Status", "description": "Filter connections by status. Can be specified multiple times. Default: all.", @@ -25907,7 +25918,7 @@ }, "uuid": "1dc1971f-4bcb-405f-826e-d2cfa2bdba2f" }, - "2484": { + "2485": { "varname": "network_connections_windows_conn_type", "caption": "Network Connections: Conn Type", "description": "Filter connections by family/type. Can be specified multiple times. Default: all.", @@ -25920,7 +25931,7 @@ }, "uuid": "5a390955-1364-4070-b23e-d2bab1184e83" }, - "2485": { + "2486": { "varname": "network_connections_windows_critical", "caption": "Network Connections: Critical", "description": "CRIT threshold for the number of connections.", @@ -25931,7 +25942,7 @@ }, "uuid": "631618c9-a682-4bc5-8d10-218729782631" }, - "2486": { + "2487": { "varname": "network_connections_windows_no_perfdata", "caption": "Network Connections: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -25940,7 +25951,7 @@ "settings": {}, "uuid": "d09400f0-7139-4d66-bfb4-1aa859fb51b3" }, - "2487": { + "2488": { "varname": "network_connections_windows_warning", "caption": "Network Connections: Warning", "description": "WARN threshold for the number of connections.", @@ -25951,7 +25962,7 @@ }, "uuid": "f506d10d-cbb4-47a0-8f70-654c527848af" }, - "2488": { + "2489": { "varname": "network_errors_always_ok", "caption": "Network Errors: Always OK?", "description": "Always returns OK.", @@ -25960,7 +25971,7 @@ "settings": {}, "uuid": "ae4a22f2-b83f-4b43-ab5d-4ce9f103fc08" }, - "2489": { + "2490": { "varname": "network_errors_critical", "caption": "Network Errors: Critical", "description": "CRIT threshold for the combined per-second error rate of an interface. Supports Nagios ranges. Default: no critical threshold", @@ -25971,7 +25982,7 @@ }, "uuid": "889046ab-9939-4bce-bc11-ca2d94d0f6d8" }, - "2490": { + "2491": { "varname": "network_errors_ignore", "caption": "Network Errors: Ignore", "description": "Ignore items whose name matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times.", @@ -25982,7 +25993,7 @@ }, "uuid": "db829401-a727-4378-9e5b-1397dca99512" }, - "2491": { + "2492": { "varname": "network_errors_match", "caption": "Network Errors: Match", "description": "Only check items whose name matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second).", @@ -25993,7 +26004,7 @@ }, "uuid": "415c634c-6930-410f-b690-b20324bb3b8b" }, - "2492": { + "2493": { "varname": "network_errors_no_match_severity", "caption": "Network Errors: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -26006,7 +26017,7 @@ }, "uuid": "13509c77-576b-4750-a0b6-7fd5ddeccf13" }, - "2493": { + "2494": { "varname": "network_errors_no_perfdata", "caption": "Network Errors: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -26015,7 +26026,7 @@ "settings": {}, "uuid": "33c3c7c2-34c4-4d14-8b09-d6ed709ef743" }, - "2494": { + "2495": { "varname": "network_errors_warning", "caption": "Network Errors: Warning", "description": "WARN threshold for the combined per-second error rate of an interface. Supports Nagios ranges.", @@ -26026,7 +26037,7 @@ }, "uuid": "037777e2-3c27-4bd5-9443-8dffbae1460c" }, - "2495": { + "2496": { "varname": "network_errors_windows_always_ok", "caption": "Network Errors: Always OK?", "description": "Always returns OK.", @@ -26035,7 +26046,7 @@ "settings": {}, "uuid": "3e8620c4-d8f7-4593-b228-5eda9c7d8642" }, - "2496": { + "2497": { "varname": "network_errors_windows_critical", "caption": "Network Errors: Critical", "description": "CRIT threshold for the combined per-second error rate of an interface. Supports Nagios ranges. Default: no critical threshold", @@ -26046,7 +26057,7 @@ }, "uuid": "aebb071b-8c94-4159-8e5e-8c76eab5f553" }, - "2497": { + "2498": { "varname": "network_errors_windows_ignore", "caption": "Network Errors: Ignore", "description": "Ignore items whose name matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times.", @@ -26057,7 +26068,7 @@ }, "uuid": "57b186f2-88ec-4900-b301-a8accf83a0e3" }, - "2498": { + "2499": { "varname": "network_errors_windows_match", "caption": "Network Errors: Match", "description": "Only check items whose name matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second).", @@ -26068,7 +26079,7 @@ }, "uuid": "a9aa437d-c00b-480f-a4f5-2e88ec05fc61" }, - "2499": { + "2500": { "varname": "network_errors_windows_no_match_severity", "caption": "Network Errors: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -26081,7 +26092,7 @@ }, "uuid": "3a228c22-1440-4b88-b162-993a7a548a48" }, - "2500": { + "2501": { "varname": "network_errors_windows_no_perfdata", "caption": "Network Errors: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -26090,7 +26101,7 @@ "settings": {}, "uuid": "57c7ae9a-7adc-4145-87a4-9ae936e429d5" }, - "2501": { + "2502": { "varname": "network_errors_windows_warning", "caption": "Network Errors: Warning", "description": "WARN threshold for the combined per-second error rate of an interface. Supports Nagios ranges.", @@ -26101,7 +26112,7 @@ }, "uuid": "c9a3caac-8786-4b49-8287-542bb157be55" }, - "2502": { + "2503": { "varname": "network_io_always_ok", "caption": "Network I/O: Always OK?", "description": "Always returns OK.", @@ -26110,7 +26121,7 @@ "settings": {}, "uuid": "082fb6a6-bc7c-4f52-97a8-b3cfddde4961" }, - "2503": { + "2504": { "varname": "network_io_count", "caption": "Network I/O: Count", "description": "Number of consecutive checks the threshold must be exceeded before alerting.", @@ -26121,7 +26132,7 @@ }, "uuid": "d5e0a5f3-f734-47ee-99e5-493a2f0a1a7f" }, - "2504": { + "2505": { "varname": "network_io_critical", "caption": "Network I/O: Critical", "description": "CRIT threshold for network I/O rx/tx rate over the entire period as a percentage of the maximum network I/O rate.", @@ -26132,7 +26143,7 @@ }, "uuid": "c6adaedb-a921-4239-82d4-f7cd0927d2fd" }, - "2505": { + "2506": { "varname": "network_io_ignore", "caption": "Network I/O: Ignore", "description": "Ignore network interfaces starting with this string. Can be specified multiple times. Example: `--ignore tun`.", @@ -26143,7 +26154,7 @@ }, "uuid": "3f82ea81-be25-4cd7-9812-ff893be56bb2" }, - "2506": { + "2507": { "varname": "network_io_no_match_severity", "caption": "Network I/O: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -26156,7 +26167,7 @@ }, "uuid": "b32c2aaa-d3a5-449a-8119-18eea2eebb2f" }, - "2507": { + "2508": { "varname": "network_io_no_perfdata", "caption": "Network I/O: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -26165,7 +26176,7 @@ "settings": {}, "uuid": "b8d2c270-4ff9-4be2-81f9-96fe24868ed0" }, - "2508": { + "2509": { "varname": "network_io_warning", "caption": "Network I/O: Warning", "description": "WARN threshold for network I/O rx/tx rate over the entire period as a percentage of the maximum network I/O rate.", @@ -26176,7 +26187,7 @@ }, "uuid": "3b30c369-a9b9-423f-8da0-9825089c091b" }, - "2509": { + "2510": { "varname": "network_io_windows_always_ok", "caption": "Network I/O: Always OK?", "description": "Always returns OK.", @@ -26185,7 +26196,7 @@ "settings": {}, "uuid": "709aecfa-6c7d-43b0-976e-df972f356a1e" }, - "2510": { + "2511": { "varname": "network_io_windows_count", "caption": "Network I/O: Count", "description": "Number of consecutive checks the threshold must be exceeded before alerting.", @@ -26196,7 +26207,7 @@ }, "uuid": "3c3c7347-3c5a-46a4-94ab-f39c77c7e54a" }, - "2511": { + "2512": { "varname": "network_io_windows_critical", "caption": "Network I/O: Critical", "description": "CRIT threshold for network I/O rx/tx rate over the entire period as a percentage of the maximum network I/O rate.", @@ -26207,7 +26218,7 @@ }, "uuid": "edafc3bd-f0c9-4005-9d22-123b354eca8d" }, - "2512": { + "2513": { "varname": "network_io_windows_ignore", "caption": "Network I/O: Ignore", "description": "Ignore network interfaces starting with this string. Can be specified multiple times. Example: `--ignore tun`.", @@ -26218,7 +26229,7 @@ }, "uuid": "63a77c30-4972-4169-85c6-2625405a6335" }, - "2513": { + "2514": { "varname": "network_io_windows_no_match_severity", "caption": "Network I/O: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -26231,7 +26242,7 @@ }, "uuid": "2b89d60c-90dd-47f9-85a3-c5014c083181" }, - "2514": { + "2515": { "varname": "network_io_windows_no_perfdata", "caption": "Network I/O: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -26240,7 +26251,7 @@ "settings": {}, "uuid": "2675f73a-04d4-4428-b79b-90626ba07a0c" }, - "2515": { + "2516": { "varname": "network_io_windows_warning", "caption": "Network I/O: Warning", "description": "WARN threshold for network I/O rx/tx rate over the entire period as a percentage of the maximum network I/O rate.", @@ -26251,7 +26262,7 @@ }, "uuid": "b788c0da-70d8-462d-9ac9-eced65bbcf76" }, - "2516": { + "2517": { "varname": "network_port_tcp_always_ok", "caption": "Network Port TCP: Always OK?", "description": "Always returns OK.", @@ -26260,7 +26271,7 @@ "settings": {}, "uuid": "8272cdb0-6f9e-4bcd-acce-6f7d34d45268" }, - "2517": { + "2518": { "varname": "network_port_tcp_hostname", "caption": "Network Port TCP: Hostname", "description": "Host or IP address to check.", @@ -26271,7 +26282,7 @@ }, "uuid": "687ebeb1-0407-4db2-9b7d-902bf0484783" }, - "2518": { + "2519": { "varname": "network_port_tcp_port", "caption": "Network Port TCP: Port", "description": "TCP port number to check.", @@ -26282,7 +26293,7 @@ }, "uuid": "4715ee2c-3533-4e9d-8046-b27d23616aac" }, - "2519": { + "2520": { "varname": "network_port_tcp_portname", "caption": "Network Port TCP: Portname", "description": "Human-readable display name for the port in the output message. Example: `--portname https`.", @@ -26293,7 +26304,7 @@ }, "uuid": "3c2238e0-583f-4e79-af3f-5c9693305082" }, - "2520": { + "2521": { "varname": "network_port_tcp_severity", "caption": "Network Port TCP: Severity", "description": "Severity for alerting.", @@ -26306,7 +26317,7 @@ }, "uuid": "6c0ae197-49f4-47a0-8e68-f155d1b05efb" }, - "2521": { + "2522": { "varname": "network_port_tcp_timeout", "caption": "Network Port TCP: Timeout", "description": "Network timeout in seconds.", @@ -26317,7 +26328,7 @@ }, "uuid": "c9addadb-8940-4571-aee5-a66850977c64" }, - "2522": { + "2523": { "varname": "network_port_tcp_type", "caption": "Network Port TCP: Type", "description": "Connection type, \"tcp\" for IPv4 or \"tcp6\" for IPv6.", @@ -26330,7 +26341,7 @@ }, "uuid": "c47a7810-87eb-419a-ace5-176e34010c8b" }, - "2523": { + "2524": { "varname": "network_port_tcp_windows_always_ok", "caption": "Network Port TCP: Always OK?", "description": "Always returns OK.", @@ -26339,7 +26350,7 @@ "settings": {}, "uuid": "b599df19-a1ab-4a99-8009-c2d42a7a3da4" }, - "2524": { + "2525": { "varname": "network_port_tcp_windows_hostname", "caption": "Network Port TCP: Hostname", "description": "Host or IP address to check.", @@ -26350,7 +26361,7 @@ }, "uuid": "142d4b79-ebb4-4e44-ba71-d74e62e0e6ec" }, - "2525": { + "2526": { "varname": "network_port_tcp_windows_port", "caption": "Network Port TCP: Port", "description": "TCP port number to check.", @@ -26361,7 +26372,7 @@ }, "uuid": "d29fdc25-2357-4c87-88b0-333388565769" }, - "2526": { + "2527": { "varname": "network_port_tcp_windows_portname", "caption": "Network Port TCP: Portname", "description": "Human-readable display name for the port in the output message. Example: `--portname https`.", @@ -26372,7 +26383,7 @@ }, "uuid": "88c4eef3-57ea-43d5-a433-700695e51f53" }, - "2527": { + "2528": { "varname": "network_port_tcp_windows_severity", "caption": "Network Port TCP: Severity", "description": "Severity for alerting.", @@ -26385,7 +26396,7 @@ }, "uuid": "fbfa8fdc-b379-4028-9bc7-c04ec891bf1d" }, - "2528": { + "2529": { "varname": "network_port_tcp_windows_timeout", "caption": "Network Port TCP: Timeout", "description": "Network timeout in seconds.", @@ -26396,7 +26407,7 @@ }, "uuid": "c80225e1-4566-472e-a6b8-5fba2a002ffc" }, - "2529": { + "2530": { "varname": "network_port_tcp_windows_type", "caption": "Network Port TCP: Type", "description": "Connection type, \"tcp\" for IPv4 or \"tcp6\" for IPv6.", @@ -26409,7 +26420,7 @@ }, "uuid": "458e4ae3-4d9a-4f8b-bf17-8894f2329a5b" }, - "2530": { + "2531": { "varname": "nextcloud_app_updates_always_ok", "caption": "Nextcloud App Updates: Always OK?", "description": "Always returns OK.", @@ -26418,7 +26429,7 @@ "settings": {}, "uuid": "3db05e78-6164-40ef-ace1-d33c5d1942b2" }, - "2531": { + "2532": { "varname": "nextcloud_app_updates_critical", "caption": "Nextcloud App Updates: Critical", "description": "CRIT threshold for how long an app update may stay available, in hours. Supports Nagios ranges. Default: no critical threshold", @@ -26429,7 +26440,7 @@ }, "uuid": "218c8a7a-989c-40a6-a3c6-c064274b10f0" }, - "2532": { + "2533": { "varname": "nextcloud_app_updates_ignore", "caption": "Nextcloud App Updates: Ignore", "description": "Ignore apps whose app id matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times.", @@ -26440,7 +26451,7 @@ }, "uuid": "80fae38c-ba47-4230-9929-1c9bc5ce40e6" }, - "2533": { + "2534": { "varname": "nextcloud_app_updates_match", "caption": "Nextcloud App Updates: Match", "description": "Only check apps whose app id matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second).", @@ -26451,7 +26462,7 @@ }, "uuid": "c1dd7941-482e-4805-b4c3-e5d803005dd4" }, - "2534": { + "2535": { "varname": "nextcloud_app_updates_no_match_severity", "caption": "Nextcloud App Updates: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -26464,7 +26475,7 @@ }, "uuid": "f93f7989-c1cb-4c7b-928a-fa3b11581f33" }, - "2535": { + "2536": { "varname": "nextcloud_app_updates_no_perfdata", "caption": "Nextcloud App Updates: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -26473,7 +26484,7 @@ "settings": {}, "uuid": "a9cb208a-e054-4546-83bc-1fd021fd6882" }, - "2536": { + "2537": { "varname": "nextcloud_app_updates_path", "caption": "Nextcloud App Updates: Path", "description": "Local path to the Nextcloud installation, typically the web server document root.", @@ -26484,7 +26495,7 @@ }, "uuid": "29dc7029-ab7b-472e-ba9b-4beeebae7bc7" }, - "2537": { + "2538": { "varname": "nextcloud_app_updates_timeout", "caption": "Nextcloud App Updates: Timeout", "description": "Network timeout in seconds.", @@ -26495,7 +26506,7 @@ }, "uuid": "50e5699f-91aa-4d7d-872b-da2e57978862" }, - "2538": { + "2539": { "varname": "nextcloud_app_updates_verbose", "caption": "Nextcloud App Updates: Verbose?", "description": "Makes this plugin verbose during the operation. Useful for debugging and seeing what is going on under the hood.", @@ -26504,7 +26515,7 @@ "settings": {}, "uuid": "4175aee4-4e51-4971-90f8-1d7349bf5dd0" }, - "2539": { + "2540": { "varname": "nextcloud_app_updates_warning", "caption": "Nextcloud App Updates: Warning", "description": "WARN threshold for how long an app update may stay available, in hours. Supports Nagios ranges.", @@ -26515,7 +26526,7 @@ }, "uuid": "c23e3755-c76e-4eb9-a2c6-e95452fca9db" }, - "2540": { + "2541": { "varname": "nextcloud_enterprise_always_ok", "caption": "Nextcloud Enterprise: Always OK?", "description": "Always returns OK.", @@ -26524,7 +26535,7 @@ "settings": {}, "uuid": "20844aae-aba5-498b-b7c8-fb743327efc0" }, - "2541": { + "2542": { "varname": "nextcloud_enterprise_critical", "caption": "Nextcloud Enterprise: Critical", "description": "CRIT threshold for the number of accounts the subscription has to cover. Supports Nagios ranges. Evaluated whenever it is given. When omitted, it is evaluated only on an instance that declares no account limit of its own, because a declared limit is compared against the account count anyway. Default: empty, no CRIT threshold", @@ -26535,7 +26546,7 @@ }, "uuid": "5128fdf4-a049-4f0b-8805-a33ebaf93304" }, - "2542": { + "2543": { "varname": "nextcloud_enterprise_grace_wait", "caption": "Nextcloud Enterprise: Grace Wait", "description": "How long an account count above its limit is tolerated before it counts towards the state. Set this to cover the time a directory synchronisation needs to settle, so an import that briefly overshoots stays quiet until it has had its chance. Starts when the count first goes over and starts over once it is back within the limit. A duration such as `12h`, `8D` or `2W`; `0D` disables the grace period.", @@ -26546,7 +26557,7 @@ }, "uuid": "5559f2c4-a0c2-4fe8-bbe9-61ba2f301aa7" }, - "2543": { + "2544": { "varname": "nextcloud_enterprise_no_perfdata", "caption": "Nextcloud Enterprise: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -26555,7 +26566,7 @@ "settings": {}, "uuid": "f715aafc-a5aa-4912-b270-60e8dd86d0c9" }, - "2544": { + "2545": { "varname": "nextcloud_enterprise_path", "caption": "Nextcloud Enterprise: Path", "description": "Local path to the Nextcloud installation, typically the web server document root.", @@ -26566,7 +26577,7 @@ }, "uuid": "424ef281-469f-4ab9-bc57-993c2ac193c8" }, - "2545": { + "2546": { "varname": "nextcloud_enterprise_timeout", "caption": "Nextcloud Enterprise: Timeout", "description": "Timeout in seconds for a single Nextcloud command.", @@ -26577,7 +26588,7 @@ }, "uuid": "1cf60361-d881-40b0-8f66-93f99a32f890" }, - "2546": { + "2547": { "varname": "nextcloud_enterprise_warning", "caption": "Nextcloud Enterprise: Warning", "description": "WARN threshold for the number of accounts the subscription has to cover. Supports Nagios ranges. Evaluated whenever it is given. When omitted, it is evaluated only on an instance that declares no account limit of its own, because a declared limit is compared against the account count anyway. The default covers the smallest Nextcloud subscription, which stops short of 150 accounts. Default: @150:", @@ -26588,7 +26599,7 @@ }, "uuid": "aed8f76e-c2bd-4e07-a7f0-1729fd50f447" }, - "2547": { + "2548": { "varname": "nextcloud_security_scan_always_ok", "caption": "Nextcloud Security Scan: Always OK?", "description": "Always returns OK.", @@ -26597,7 +26608,7 @@ "settings": {}, "uuid": "f19307ef-aea7-44ec-b0ca-5b53e5abaf9b" }, - "2548": { + "2549": { "varname": "nextcloud_security_scan_insecure", "caption": "Nextcloud Security Scan: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -26606,7 +26617,7 @@ "settings": {}, "uuid": "50687df7-cc40-45cc-aa07-e81a353ee5c2" }, - "2549": { + "2550": { "varname": "nextcloud_security_scan_no_proxy", "caption": "Nextcloud Security Scan: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -26615,7 +26626,7 @@ "settings": {}, "uuid": "c05dfdd0-9c3f-4f80-8ed0-210dbf224bbc" }, - "2550": { + "2551": { "varname": "nextcloud_security_scan_path", "caption": "Nextcloud Security Scan: Path", "description": "Local path to the Nextcloud installation, typically the web server document root. When set, the plugin reads the installed version via `occ` and triggers an immediate re-scan if it differs from the version scan.nextcloud.com last saw, so the rating no longer lags a Nextcloud update. Requires running on the Nextcloud server with sudo for the UID owning config/config.php.", @@ -26626,7 +26637,7 @@ }, "uuid": "f3e3d02b-6520-48e4-88fd-450eed3e1053" }, - "2551": { + "2552": { "varname": "nextcloud_security_scan_proxy", "caption": "Nextcloud Security Scan: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -26637,7 +26648,7 @@ }, "uuid": "012ae381-b367-49a8-a977-e809ff498b5d" }, - "2552": { + "2553": { "varname": "nextcloud_security_scan_timeout", "caption": "Nextcloud Security Scan: Timeout", "description": "Network timeout in seconds.", @@ -26648,7 +26659,7 @@ }, "uuid": "f342b8c9-132d-48a2-a871-32e3397c5369" }, - "2553": { + "2554": { "varname": "nextcloud_security_scan_trigger", "caption": "Nextcloud Security Scan: Trigger", "description": "Trigger a re-scan if the result on scan.nextcloud.com is older than this many days.", @@ -26659,7 +26670,7 @@ }, "uuid": "5d0095fa-03e9-4963-a429-abceb28b8166" }, - "2554": { + "2555": { "varname": "nextcloud_security_scan_url", "caption": "Nextcloud Security Scan: URL", "description": "Nextcloud server URL. Example: `cloud.example.com`.", @@ -26670,7 +26681,7 @@ }, "uuid": "6b756473-81b6-4748-9495-c84b6a6b62b9" }, - "2555": { + "2556": { "varname": "nextcloud_stats_always_ok", "caption": "Nextcloud Stats: Always OK?", "description": "Always returns OK.", @@ -26679,7 +26690,7 @@ "settings": {}, "uuid": "2b6bfc24-d7de-403d-9499-234b74e9c416" }, - "2556": { + "2557": { "varname": "nextcloud_stats_insecure", "caption": "Nextcloud Stats: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -26688,7 +26699,7 @@ "settings": {}, "uuid": "5ef9aabe-30e7-4c1c-aa79-4095e5590bfa" }, - "2557": { + "2558": { "varname": "nextcloud_stats_no_perfdata", "caption": "Nextcloud Stats: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -26697,7 +26708,7 @@ "settings": {}, "uuid": "f582bc69-faeb-4893-a19b-6d4e191294c0" }, - "2558": { + "2559": { "varname": "nextcloud_stats_no_proxy", "caption": "Nextcloud Stats: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -26706,7 +26717,7 @@ "settings": {}, "uuid": "876d3985-a2ad-4f8e-a0e0-69e9abcbaed4" }, - "2559": { + "2560": { "varname": "nextcloud_stats_password", "caption": "Nextcloud Stats: Password", "description": "Password for authenticating against the Nextcloud API.", @@ -26717,7 +26728,7 @@ }, "uuid": "df514bba-46b6-4136-9dcb-3511a0f9fc9f" }, - "2560": { + "2561": { "varname": "nextcloud_stats_proxy", "caption": "Nextcloud Stats: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -26728,7 +26739,7 @@ }, "uuid": "275c7e1f-5efb-43cb-b0b9-8847b19d0b7b" }, - "2561": { + "2562": { "varname": "nextcloud_stats_timeout", "caption": "Nextcloud Stats: Timeout", "description": "Network timeout in seconds.", @@ -26739,7 +26750,7 @@ }, "uuid": "c1074f28-cfaf-47cb-ae0f-312a04f1b02b" }, - "2562": { + "2563": { "varname": "nextcloud_stats_top", "caption": "Nextcloud Stats: Top", "description": "Number of top storage-consuming accounts to list. Use `--top=0` to disable.", @@ -26750,7 +26761,7 @@ }, "uuid": "fb09ce6f-95c7-4886-beb9-91add0fbafb4" }, - "2563": { + "2564": { "varname": "nextcloud_stats_top_timeout", "caption": "Nextcloud Stats: Top Timeout", "description": "Network timeout in seconds for fetching the account list used by `--top`. Runs much longer than the timeout of the other requests, because the endpoint answers slower the more accounts the instance has. Keep it below the timeout the monitoring agent grants the check.", @@ -26761,7 +26772,7 @@ }, "uuid": "b4227f83-0fd2-4621-bfcf-77af60fece2b" }, - "2564": { + "2565": { "varname": "nextcloud_stats_url", "caption": "Nextcloud Stats: URL", "description": "Nextcloud server info API URL.", @@ -26772,7 +26783,7 @@ }, "uuid": "ae000d17-2a05-425e-ba52-8b046f72fa6b" }, - "2565": { + "2566": { "varname": "nextcloud_stats_username", "caption": "Nextcloud Stats: Username", "description": "Username for authenticating against the Nextcloud API.", @@ -26783,7 +26794,7 @@ }, "uuid": "fa76753f-0796-4ada-8174-245c60cbf69a" }, - "2566": { + "2567": { "varname": "nextcloud_status_always_ok", "caption": "Nextcloud Status: Always OK?", "description": "Always returns OK.", @@ -26792,7 +26803,7 @@ "settings": {}, "uuid": "9bb80594-964c-4358-8032-c97c06007874" }, - "2567": { + "2568": { "varname": "nextcloud_status_insecure", "caption": "Nextcloud Status: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -26801,7 +26812,7 @@ "settings": {}, "uuid": "ba4ddafd-f721-4f2a-8d08-fed61d4b18e6" }, - "2568": { + "2569": { "varname": "nextcloud_status_maintenance_severity", "caption": "Nextcloud Status: Maintenance Severity", "description": "State to report while the instance is in maintenance mode. Also caps the state of a pending database upgrade, because a running `occ upgrade` turns maintenance mode on for its duration.", @@ -26814,7 +26825,7 @@ }, "uuid": "535c2d0e-5007-4ce6-a7ec-e59684c2d97f" }, - "2569": { + "2570": { "varname": "nextcloud_status_no_perfdata", "caption": "Nextcloud Status: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -26823,7 +26834,7 @@ "settings": {}, "uuid": "a79df44c-7577-49e9-8b4b-3b5201f15c05" }, - "2570": { + "2571": { "varname": "nextcloud_status_no_proxy", "caption": "Nextcloud Status: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -26832,7 +26843,7 @@ "settings": {}, "uuid": "3076a93c-fba6-446d-9038-2053f593e15a" }, - "2571": { + "2572": { "varname": "nextcloud_status_proxy", "caption": "Nextcloud Status: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -26843,7 +26854,7 @@ }, "uuid": "696613ca-57a7-4905-9417-4f4f650c2b57" }, - "2572": { + "2573": { "varname": "nextcloud_status_timeout", "caption": "Nextcloud Status: Timeout", "description": "Network timeout in seconds.", @@ -26854,7 +26865,7 @@ }, "uuid": "4fe496dc-3453-4cfd-aca5-49e7b786c8e2" }, - "2573": { + "2574": { "varname": "nextcloud_status_unavailable_severity", "caption": "Nextcloud Status: Unavailable Severity", "description": "State to report when the instance does not answer with a status document. A refused connection, a timeout, an HTTP error or an unparsable body all mean that the instance is serving nobody. A rejected host name is reported as UNKNOWN regardless of this setting, because that is a wrong `--url` rather than a broken instance.", @@ -26867,7 +26878,7 @@ }, "uuid": "22c49aab-82d0-441e-8de1-c36b73650938" }, - "2574": { + "2575": { "varname": "nextcloud_status_upgrade_severity", "caption": "Nextcloud Status: Upgrade Severity", "description": "State to report when the instance needs a database upgrade while maintenance mode is off. The instance answers every request with the upgrade page until `occ upgrade` has run, so it serves nobody.", @@ -26880,7 +26891,7 @@ }, "uuid": "78bbcc95-498a-4ee6-8f87-d3e914595986" }, - "2575": { + "2576": { "varname": "nextcloud_status_url", "caption": "Nextcloud Status: URL", "description": "Nextcloud status URL endpoint.", @@ -26891,7 +26902,7 @@ }, "uuid": "ebdb822a-0246-4571-83ac-fa8cbe4870d7" }, - "2576": { + "2577": { "varname": "nextcloud_version_always_ok", "caption": "Nextcloud Version: Always OK?", "description": "Always returns OK.", @@ -26900,7 +26911,7 @@ "settings": {}, "uuid": "4a988c97-d358-4fc5-8999-bd08d6a0cf65" }, - "2577": { + "2578": { "varname": "nextcloud_version_check_major", "caption": "Nextcloud Version: Check Major?", "description": "Alert when a new major release is available, even if the current version is not yet EOL. Example: running v26 (not yet EOL) and v27 is available.", @@ -26909,7 +26920,7 @@ "settings": {}, "uuid": "24f6855a-e82c-4c85-ba79-09c8b63e9f63" }, - "2578": { + "2579": { "varname": "nextcloud_version_check_minor", "caption": "Nextcloud Version: Check Minor?", "description": "Alert when a new major.minor release is available, even if the current version is not yet EOL. Example: running v26.2 (not yet EOL) and v26.3 is available.", @@ -26918,7 +26929,7 @@ "settings": {}, "uuid": "27e04048-5dd3-48b6-9049-e30d718b0031" }, - "2579": { + "2580": { "varname": "nextcloud_version_check_patch", "caption": "Nextcloud Version: Check Patch?", "description": "Alert when a new major.minor.patch release is available, even if the current version is not yet EOL. Example: running v26.2.7 (not yet EOL) and v26.2.8 is available.", @@ -26927,7 +26938,7 @@ "settings": {}, "uuid": "efb4589c-2c63-4f4f-afbe-e5e8c869d153" }, - "2580": { + "2581": { "varname": "nextcloud_version_insecure", "caption": "Nextcloud Version: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -26936,7 +26947,7 @@ "settings": {}, "uuid": "d9a5252e-c833-482b-a056-bebabf6f3a62" }, - "2581": { + "2582": { "varname": "nextcloud_version_no_perfdata", "caption": "Nextcloud Version: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -26945,7 +26956,7 @@ "settings": {}, "uuid": "20791c15-27d7-40da-8810-9cc664f41239" }, - "2582": { + "2583": { "varname": "nextcloud_version_no_proxy", "caption": "Nextcloud Version: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -26954,7 +26965,7 @@ "settings": {}, "uuid": "fc31ee2f-27b3-47be-85e8-171e239cfacc" }, - "2583": { + "2584": { "varname": "nextcloud_version_offset_eol", "caption": "Nextcloud Version: Offset Eol", "description": "Alert n days before (\"-30\") or after an EOL date (\"30\" or \"+30\").", @@ -26965,7 +26976,7 @@ }, "uuid": "d0ed0521-b034-4638-bcbd-b0158d56aea8" }, - "2584": { + "2585": { "varname": "nextcloud_version_path", "caption": "Nextcloud Version: Path", "description": "Local path to the Nextcloud installation, typically the web server document root.", @@ -26976,7 +26987,7 @@ }, "uuid": "6121d020-3ba8-4854-b486-988ae66aeccb" }, - "2585": { + "2586": { "varname": "nextcloud_version_proxy", "caption": "Nextcloud Version: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -26987,7 +26998,7 @@ }, "uuid": "1f409359-9d92-4d78-87be-be6521f13c5f" }, - "2586": { + "2587": { "varname": "nextcloud_version_timeout", "caption": "Nextcloud Version: Timeout", "description": "Network timeout in seconds.", @@ -26998,7 +27009,7 @@ }, "uuid": "d600a6de-a488-463f-8215-bdf9155dc4bb" }, - "2587": { + "2588": { "varname": "nextcloud_version_unreachable_severity", "caption": "Nextcloud Version: Unreachable Severity", "description": "State to report when the online source is unreachable. What is used instead - bundled offline data, a cached copy, or nothing at all - is named in the output, and a clean result then only covers what that fallback could confirm.", @@ -27011,7 +27022,7 @@ }, "uuid": "1bacd3a6-be4f-479e-9ac7-dcbc4bab0f28" }, - "2588": { + "2589": { "varname": "nfs_exports_always_ok", "caption": "Nfs Exports: Always OK?", "description": "Always returns OK.", @@ -27020,7 +27031,7 @@ "settings": {}, "uuid": "c040b9b5-7618-4641-bfab-e2e41826e437" }, - "2589": { + "2590": { "varname": "nfs_exports_brief", "caption": "Nfs Exports: Brief?", "description": "Hide the rows that are within the thresholds and show only those in a WARN or CRIT state. Perfdata and alerting are unaffected: every item still emits performance data and still drives the overall check state, so this is safe to leave on.", @@ -27029,7 +27040,7 @@ "settings": {}, "uuid": "98046199-1982-4aef-9caf-ece0b9060248" }, - "2590": { + "2591": { "varname": "nfs_exports_etab", "caption": "Nfs Exports: Etab", "description": "Path to the export table the server serves, which is where the state directory of the NFS utilities was moved to if it was moved at all.", @@ -27040,7 +27051,7 @@ }, "uuid": "415b3f80-78c2-4267-a138-f4a2e3d30e6a" }, - "2591": { + "2592": { "varname": "nfs_exports_ignore", "caption": "Nfs Exports: Ignore", "description": "Any item matching this Python regex will be ignored. Can be specified multiple times. Example: `(?i)linuxfabrik` for a case-insensitive match.", @@ -27051,7 +27062,7 @@ }, "uuid": "58ccd156-57f6-46b2-9216-c8e60f41485c" }, - "2592": { + "2593": { "varname": "nfs_exports_match", "caption": "Nfs Exports: Match", "description": "Filter by this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Examples: `(?i)example` to match \"example\" regardless of case. `^(?!.*example).*$` to match any string except \"example\" (negative lookahead).", @@ -27062,7 +27073,7 @@ }, "uuid": "7e121c43-1d91-49ab-ab51-fec0d3ffeca2" }, - "2593": { + "2594": { "varname": "nfs_exports_missing_path_severity", "caption": "Nfs Exports: Missing Path Severity", "description": "State to report for an export whose path does not exist. The server keeps serving it, and a client that has it mounted gets a stale file handle.", @@ -27075,7 +27086,7 @@ }, "uuid": "781d0829-1d6b-463a-85a3-81cdaab7d883" }, - "2594": { + "2595": { "varname": "nfs_exports_no_match_severity", "caption": "Nfs Exports: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -27088,7 +27099,7 @@ }, "uuid": "b7f9ebf9-b269-4b9d-993d-f5c5af94b591" }, - "2595": { + "2596": { "varname": "nfs_exports_no_perfdata", "caption": "Nfs Exports: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -27097,7 +27108,7 @@ "settings": {}, "uuid": "44c55fcc-7267-4cf5-b5c1-ce3530b73718" }, - "2596": { + "2597": { "varname": "nfs_exports_not_exported_severity", "caption": "Nfs Exports: Not Exported Severity", "description": "State to report for an export the configuration asks for and the server does not serve. Usually `exportfs -ra` has not been run since the entry was added, or it refused the entry; a client cannot mount such a share at all.", @@ -27110,7 +27121,7 @@ }, "uuid": "61c90430-dbf9-4cda-b58c-dfab2cd385f5" }, - "2597": { + "2598": { "varname": "nfs_exports_timeout", "caption": "Nfs Exports: Timeout", "description": "How long the export paths get to answer before they are reported as unreachable. Only a path on a network filesystem ever needs it: one whose server has stopped answering does not fail, it blocks. Every path is looked at at the same time and they share one deadline, so this is the runtime of the whole check and not a budget per path.", @@ -27121,7 +27132,7 @@ }, "uuid": "2ce5dff9-8bbc-4f77-994e-1a6b544b9b0c" }, - "2598": { + "2599": { "varname": "nfs_exports_unconfigured_severity", "caption": "Nfs Exports: Unconfigured Severity", "description": "State to report for an export the server serves and the configuration does not ask for. Cluster software that creates its exports at runtime looks exactly like this, which is why it does not alert by default.", @@ -27134,7 +27145,7 @@ }, "uuid": "ad088e36-0805-4532-94ff-ede8ce412542" }, - "2599": { + "2600": { "varname": "nfs_mounts_always_ok", "caption": "Nfs Mounts: Always OK?", "description": "Always returns OK.", @@ -27143,7 +27154,7 @@ "settings": {}, "uuid": "b69e2fc6-faba-4a0f-8ace-569679c8b832" }, - "2600": { + "2601": { "varname": "nfs_mounts_brief", "caption": "Nfs Mounts: Brief?", "description": "Hide the rows that are within the thresholds and show only those in a WARN or CRIT state. Perfdata and alerting are unaffected: every item still emits performance data and still drives the overall check state, so this is safe to leave on.", @@ -27152,7 +27163,7 @@ "settings": {}, "uuid": "baade2c4-2877-4078-b46b-c9c0feb31dd3" }, - "2601": { + "2602": { "varname": "nfs_mounts_error_severity", "caption": "Nfs Mounts: Error Severity", "description": "State to report for a mount that answers with an error other than a stale file handle, for example the I/O error a `soft` mount reports once it has given up on its server.", @@ -27165,7 +27176,7 @@ }, "uuid": "4e071021-5cd7-4136-8d83-c45b34212a27" }, - "2602": { + "2603": { "varname": "nfs_mounts_hung_severity", "caption": "Nfs Mounts: Hung Severity", "description": "State to report for a mount that does not answer within --timeout. A `hard` mount blocks instead of failing, so this is what an unreachable server looks like, and a process waiting on such a mount only gets out of that wait by being killed.", @@ -27178,7 +27189,7 @@ }, "uuid": "1d5a4aa8-9cbd-42f8-8b1a-0106718a934c" }, - "2603": { + "2604": { "varname": "nfs_mounts_ignore", "caption": "Nfs Mounts: Ignore", "description": "Any item matching this Python regex will be ignored. Can be specified multiple times. Example: `(?i)linuxfabrik` for a case-insensitive match.", @@ -27189,7 +27200,7 @@ }, "uuid": "b1b91ab1-4227-49da-8172-f7e11286638e" }, - "2604": { + "2605": { "varname": "nfs_mounts_lengthy", "caption": "Nfs Mounts: Lengthy?", "description": "Extended reporting.", @@ -27198,7 +27209,7 @@ "settings": {}, "uuid": "26a28f66-2793-4009-ab28-c6b79f3d838f" }, - "2605": { + "2606": { "varname": "nfs_mounts_match", "caption": "Nfs Mounts: Match", "description": "Filter by this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Examples: `(?i)example` to match \"example\" regardless of case. `^(?!.*example).*$` to match any string except \"example\" (negative lookahead).", @@ -27209,7 +27220,7 @@ }, "uuid": "bbe0257e-49a7-49ce-a2a0-9b8474c784df" }, - "2606": { + "2607": { "varname": "nfs_mounts_no_match_severity", "caption": "Nfs Mounts: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -27222,7 +27233,7 @@ }, "uuid": "99f2c108-fa5a-40e7-b742-f56553d71d8d" }, - "2607": { + "2608": { "varname": "nfs_mounts_no_perfdata", "caption": "Nfs Mounts: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -27231,7 +27242,7 @@ "settings": {}, "uuid": "9577d013-d67c-4322-9728-8ff977badcd6" }, - "2608": { + "2609": { "varname": "nfs_mounts_stale_severity", "caption": "Nfs Mounts: Stale Severity", "description": "State to report for a mount that answers with a stale file handle. The export it points at is gone, and the mount does not recover on its own.", @@ -27244,7 +27255,7 @@ }, "uuid": "9f5a3b50-6fca-4045-8187-1660f7853c2b" }, - "2609": { + "2610": { "varname": "nfs_mounts_timeout", "caption": "Nfs Mounts: Timeout", "description": "Network timeout in seconds. Every mount is asked at the same time and they share one deadline, so this is the runtime of the whole check and not a budget per mount.", @@ -27255,7 +27266,7 @@ }, "uuid": "5fda8a44-ebda-4dd4-9a7d-3395a67212b4" }, - "2610": { + "2611": { "varname": "nginx_disclosure_always_ok", "caption": "Nginx Disclosure: Always OK?", "description": "Always returns OK.", @@ -27264,7 +27275,7 @@ "settings": {}, "uuid": "90d11e02-4de6-438d-a69e-5e5e17bc06a7" }, - "2611": { + "2612": { "varname": "nginx_disclosure_insecure", "caption": "Nginx Disclosure: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -27273,7 +27284,7 @@ "settings": {}, "uuid": "87f05a37-addb-4db3-921a-db195f75d9d1" }, - "2612": { + "2613": { "varname": "nginx_disclosure_no_perfdata", "caption": "Nginx Disclosure: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -27282,7 +27293,7 @@ "settings": {}, "uuid": "71d3b1dd-5b3d-48e1-8fa6-a0274e44e41b" }, - "2613": { + "2614": { "varname": "nginx_disclosure_no_proxy", "caption": "Nginx Disclosure: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -27291,7 +27302,7 @@ "settings": {}, "uuid": "a93942ac-8456-4962-ad6e-6bc9e789bf6e" }, - "2614": { + "2615": { "varname": "nginx_disclosure_proxy", "caption": "Nginx Disclosure: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -27302,7 +27313,7 @@ }, "uuid": "7691af51-16e5-448d-9f4a-0f737fbe76d6" }, - "2615": { + "2616": { "varname": "nginx_disclosure_severity", "caption": "Nginx Disclosure: Severity", "description": "State to report for a server that discloses information. One of `warn` or `crit`.", @@ -27315,7 +27326,7 @@ }, "uuid": "b54a3cf3-6b5f-4365-9136-e8b7674c18eb" }, - "2616": { + "2617": { "varname": "nginx_disclosure_timeout", "caption": "Nginx Disclosure: Timeout", "description": "Network timeout in seconds.", @@ -27326,7 +27337,7 @@ }, "uuid": "4648dca7-252d-4ffd-9197-7238b66c9cee" }, - "2617": { + "2618": { "varname": "nginx_disclosure_url", "caption": "Nginx Disclosure: URL", "description": "Base URL of the NGINX server to inspect. Example: `--url=https://www.example.com`", @@ -27337,7 +27348,7 @@ }, "uuid": "ee7e94e0-68d7-40b7-843f-8a99cb071829" }, - "2618": { + "2619": { "varname": "nginx_security_always_ok", "caption": "Nginx Security: Always OK?", "description": "Always returns OK.", @@ -27346,7 +27357,7 @@ "settings": {}, "uuid": "4b3a25ac-2066-4a0f-a5e9-c7f769a1e30e" }, - "2619": { + "2620": { "varname": "nginx_security_brief", "caption": "Nginx Security: Brief?", "description": "Hide the rows that are within the thresholds and show only those in a WARN or CRIT state. Perfdata and alerting are unaffected: every item still emits performance data and still drives the overall check state, so this is safe to leave on.", @@ -27355,7 +27366,7 @@ "settings": {}, "uuid": "78a9bf6d-9af5-490d-9580-9dd78789a6b4" }, - "2620": { + "2621": { "varname": "nginx_security_command", "caption": "Nginx Security: Command", "description": "Path to the NGINX binary. Probed automatically in the PATH if not given. Must resolve within a standard binary directory (/bin, /opt, /sbin, /usr), and nobody but root may be able to change it or a directory above it. Example: `--command=/usr/local/nginx/sbin/nginx`", @@ -27366,7 +27377,7 @@ }, "uuid": "6e356180-c61b-4047-b5a1-aa6df1567110" }, - "2621": { + "2622": { "varname": "nginx_security_ignore", "caption": "Nginx Security: Ignore", "description": "Any check whose name matches this Python regex will be dropped from the report. The name is the one in the `Check Name` column of the table, not a module or a file name, and it is matched anywhere in that name, so the name as it stands is enough and needs no anchors. A filter that matches no check is reported rather than silently doing nothing. Use it for a finding the site knowingly accepts, for example a dynamic module the service needs. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. Example: `--ignore='Dynamic modules'`", @@ -27377,7 +27388,7 @@ }, "uuid": "bc1ccae3-e6c1-4549-93c4-615ade690dbd" }, - "2622": { + "2623": { "varname": "nginx_security_match", "caption": "Nginx Security: Match", "description": "Only report the checks whose name matches this Python regex. Filter by this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Examples: `(?i)example` to match \"example\" regardless of case. `^(?!.*example).*$` to match any string except \"example\" (negative lookahead).", @@ -27388,7 +27399,7 @@ }, "uuid": "19ee0e0a-5c10-4b8a-86ea-f314dc9e1f14" }, - "2623": { + "2624": { "varname": "nginx_security_no_match_severity", "caption": "Nginx Security: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -27401,7 +27412,7 @@ }, "uuid": "b17b604b-cde8-46c6-b830-c415e960645b" }, - "2624": { + "2625": { "varname": "nginx_security_no_perfdata", "caption": "Nginx Security: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -27410,7 +27421,7 @@ "settings": {}, "uuid": "b39cb612-c7ca-431d-9f22-3bb48ba5e31d" }, - "2625": { + "2626": { "varname": "nginx_security_severity", "caption": "Nginx Security: Severity", "description": "State to report for a failed check. One of `warn` or `crit`.", @@ -27423,7 +27434,7 @@ }, "uuid": "827d07ff-d9ca-4d8e-a74b-43eace77eb9b" }, - "2626": { + "2627": { "varname": "nginx_security_timeout", "caption": "Nginx Security: Timeout", "description": "Network timeout in seconds.", @@ -27434,7 +27445,7 @@ }, "uuid": "aabaedf3-f36e-4a39-abb9-49c98fe9bac8" }, - "2627": { + "2628": { "varname": "nginx_status_always_ok", "caption": "Nginx Status: Always OK?", "description": "Always returns OK.", @@ -27443,7 +27454,7 @@ "settings": {}, "uuid": "1def58cb-5a02-478e-8a2d-04c2f62f2e9f" }, - "2628": { + "2629": { "varname": "nginx_status_critical", "caption": "Nginx Status: Critical", "description": "CRIT threshold for the number of active connections.", @@ -27454,7 +27465,7 @@ }, "uuid": "6dfe2a7c-4a11-40b9-a312-fa78d5a0302c" }, - "2629": { + "2630": { "varname": "nginx_status_insecure", "caption": "Nginx Status: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -27463,7 +27474,7 @@ "settings": {}, "uuid": "2a1d5d69-2a9e-4dfc-8811-1f13adf64211" }, - "2630": { + "2631": { "varname": "nginx_status_no_perfdata", "caption": "Nginx Status: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -27472,7 +27483,7 @@ "settings": {}, "uuid": "052d546d-c328-403a-b64f-7cdd1e1604c9" }, - "2631": { + "2632": { "varname": "nginx_status_no_proxy", "caption": "Nginx Status: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -27481,7 +27492,7 @@ "settings": {}, "uuid": "d41a0c05-0562-4a89-8c0c-d51f7fbd8aec" }, - "2632": { + "2633": { "varname": "nginx_status_proxy", "caption": "Nginx Status: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -27492,7 +27503,7 @@ }, "uuid": "e9cb0f5b-ad68-4605-8334-9d0427773dc4" }, - "2633": { + "2634": { "varname": "nginx_status_timeout", "caption": "Nginx Status: Timeout", "description": "Network timeout in seconds.", @@ -27503,7 +27514,7 @@ }, "uuid": "d24c2d06-55e2-477f-a2b5-7106db626501" }, - "2634": { + "2635": { "varname": "nginx_status_url", "caption": "Nginx Status: URL", "description": "NGINX stub_status URL.", @@ -27514,7 +27525,7 @@ }, "uuid": "753284b2-4121-4bb6-84de-70ac7dc15d9c" }, - "2635": { + "2636": { "varname": "nginx_status_warning", "caption": "Nginx Status: Warning", "description": "WARN threshold for the number of active connections.", @@ -27525,7 +27536,7 @@ }, "uuid": "3ba05f28-a07e-4d49-ad64-d8fc08440aec" }, - "2636": { + "2637": { "varname": "nodebb_cache_always_ok", "caption": "Nodebb Cache: Always OK?", "description": "Always returns OK.", @@ -27534,7 +27545,7 @@ "settings": {}, "uuid": "b2da454e-9b23-45cf-867f-b163b902ca77" }, - "2637": { + "2638": { "varname": "nodebb_cache_critical", "caption": "Nodebb Cache: Critical", "description": "CRIT threshold in percent.", @@ -27545,7 +27556,7 @@ }, "uuid": "352b978c-883f-4d3c-8859-f3fcc43a4a06" }, - "2638": { + "2639": { "varname": "nodebb_cache_insecure", "caption": "Nodebb Cache: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -27554,7 +27565,7 @@ "settings": {}, "uuid": "e1aea689-5abf-4ba5-9c9c-44b2aced7f9a" }, - "2639": { + "2640": { "varname": "nodebb_cache_no_perfdata", "caption": "Nodebb Cache: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -27563,7 +27574,7 @@ "settings": {}, "uuid": "0a139393-dc87-452e-9fe5-f42441aca0b7" }, - "2640": { + "2641": { "varname": "nodebb_cache_no_proxy", "caption": "Nodebb Cache: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -27572,7 +27583,7 @@ "settings": {}, "uuid": "232da085-25ad-4e56-95e3-f17e0bbf35b9" }, - "2641": { + "2642": { "varname": "nodebb_cache_proxy", "caption": "Nodebb Cache: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -27583,7 +27594,7 @@ }, "uuid": "732ec433-159d-40de-8f56-3aea6ee96ce7" }, - "2642": { + "2643": { "varname": "nodebb_cache_severity", "caption": "Nodebb Cache: Severity", "description": "Severity for alerts that do not depend on thresholds. One of \"warn\" or \"crit\".", @@ -27596,7 +27607,7 @@ }, "uuid": "ee2ad331-b216-4d78-a806-ef8c7db2cbc3" }, - "2643": { + "2644": { "varname": "nodebb_cache_timeout", "caption": "Nodebb Cache: Timeout", "description": "Network timeout in seconds.", @@ -27607,7 +27618,7 @@ }, "uuid": "7424ac1d-93b9-4045-99c4-d24ebd7d3c5a" }, - "2644": { + "2645": { "varname": "nodebb_cache_token", "caption": "Nodebb Cache: Token", "description": "NodeBB API bearer token.", @@ -27618,7 +27629,7 @@ }, "uuid": "dff46a9b-28f4-47c2-b1f9-bf8144981011" }, - "2645": { + "2646": { "varname": "nodebb_cache_url", "caption": "Nodebb Cache: URL", "description": "NodeBB API URL.", @@ -27629,7 +27640,7 @@ }, "uuid": "c21347f8-e13b-4c37-bbba-577521986a2d" }, - "2646": { + "2647": { "varname": "nodebb_cache_warning", "caption": "Nodebb Cache: Warning", "description": "WARN threshold in percent.", @@ -27640,7 +27651,7 @@ }, "uuid": "241e54dc-db82-48d5-bc70-48205b1a2f98" }, - "2647": { + "2648": { "varname": "nodebb_database_always_ok", "caption": "Nodebb Database: Always OK?", "description": "Always returns OK.", @@ -27649,7 +27660,7 @@ "settings": {}, "uuid": "df0c7fb0-bfb8-40ec-aa65-0942afbecd52" }, - "2648": { + "2649": { "varname": "nodebb_database_critical", "caption": "Nodebb Database: Critical", "description": "CRIT threshold in percent.", @@ -27660,7 +27671,7 @@ }, "uuid": "31c3bc58-6d78-4bfd-b52b-ff53867b1391" }, - "2649": { + "2650": { "varname": "nodebb_database_insecure", "caption": "Nodebb Database: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -27669,7 +27680,7 @@ "settings": {}, "uuid": "311c7ff5-df47-4aa8-ad8a-890cafb3deae" }, - "2650": { + "2651": { "varname": "nodebb_database_no_perfdata", "caption": "Nodebb Database: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -27678,7 +27689,7 @@ "settings": {}, "uuid": "f79f1181-abc3-4302-90bc-a0171450ef3c" }, - "2651": { + "2652": { "varname": "nodebb_database_no_proxy", "caption": "Nodebb Database: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -27687,7 +27698,7 @@ "settings": {}, "uuid": "121f2fd3-3e3e-4a50-be25-c47513875d19" }, - "2652": { + "2653": { "varname": "nodebb_database_proxy", "caption": "Nodebb Database: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -27698,7 +27709,7 @@ }, "uuid": "d6639c95-2a78-4168-80c8-d3bbc1022804" }, - "2653": { + "2654": { "varname": "nodebb_database_severity", "caption": "Nodebb Database: Severity", "description": "Severity for alerts that do not depend on thresholds. One of \"warn\" or \"crit\".", @@ -27711,7 +27722,7 @@ }, "uuid": "c68b7c21-3c4a-4c10-a266-f9e21af38b6b" }, - "2654": { + "2655": { "varname": "nodebb_database_timeout", "caption": "Nodebb Database: Timeout", "description": "Network timeout in seconds.", @@ -27722,7 +27733,7 @@ }, "uuid": "9e0ea26e-a36a-46a9-acad-ced5441e54fe" }, - "2655": { + "2656": { "varname": "nodebb_database_token", "caption": "Nodebb Database: Token", "description": "NodeBB API bearer token.", @@ -27733,7 +27744,7 @@ }, "uuid": "1b048c8c-3f99-4866-936d-2a0f4a2744dd" }, - "2656": { + "2657": { "varname": "nodebb_database_url", "caption": "Nodebb Database: URL", "description": "NodeBB API URL.", @@ -27744,7 +27755,7 @@ }, "uuid": "6a935a60-4bb1-462c-8df5-a86e0c22667d" }, - "2657": { + "2658": { "varname": "nodebb_database_warning", "caption": "Nodebb Database: Warning", "description": "WARN threshold in percent.", @@ -27755,7 +27766,7 @@ }, "uuid": "523358f7-cccd-4cb9-8b31-b2e7e7b1658a" }, - "2658": { + "2659": { "varname": "nodebb_errors_always_ok", "caption": "Nodebb Errors: Always OK?", "description": "Always returns OK.", @@ -27764,7 +27775,7 @@ "settings": {}, "uuid": "c5fe22ce-f783-40cb-9769-1bd9ddd62cef" }, - "2659": { + "2660": { "varname": "nodebb_errors_insecure", "caption": "Nodebb Errors: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -27773,7 +27784,7 @@ "settings": {}, "uuid": "b76f94b1-6ed8-4561-820e-aee1547ff0fe" }, - "2660": { + "2661": { "varname": "nodebb_errors_no_perfdata", "caption": "Nodebb Errors: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -27782,7 +27793,7 @@ "settings": {}, "uuid": "643d62db-3b58-4be9-bad7-69359bb25e7c" }, - "2661": { + "2662": { "varname": "nodebb_errors_no_proxy", "caption": "Nodebb Errors: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -27791,7 +27802,7 @@ "settings": {}, "uuid": "cd0902ad-a200-4135-b39f-b6b8737c7de5" }, - "2662": { + "2663": { "varname": "nodebb_errors_proxy", "caption": "Nodebb Errors: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -27802,7 +27813,7 @@ }, "uuid": "5e82d951-efce-4933-a2d7-2d55d01ec736" }, - "2663": { + "2664": { "varname": "nodebb_errors_severity", "caption": "Nodebb Errors: Severity", "description": "Severity for alerts that do not depend on thresholds. One of \"warn\" or \"crit\".", @@ -27815,7 +27826,7 @@ }, "uuid": "b1a0379c-76bb-40b8-bb96-6f6fd9072a1c" }, - "2664": { + "2665": { "varname": "nodebb_errors_timeout", "caption": "Nodebb Errors: Timeout", "description": "Network timeout in seconds.", @@ -27826,7 +27837,7 @@ }, "uuid": "e6efed37-1384-4590-b14b-f30efe5eb865" }, - "2665": { + "2666": { "varname": "nodebb_errors_token", "caption": "Nodebb Errors: Token", "description": "NodeBB API bearer token.", @@ -27837,7 +27848,7 @@ }, "uuid": "00fd856f-614f-4c64-b800-eff68cc4512e" }, - "2666": { + "2667": { "varname": "nodebb_errors_url", "caption": "Nodebb Errors: URL", "description": "NodeBB API URL.", @@ -27848,7 +27859,7 @@ }, "uuid": "2354a23e-61a5-4bda-992c-38b98ca873f3" }, - "2667": { + "2668": { "varname": "nodebb_events_always_ok", "caption": "Nodebb Events: Always OK?", "description": "Always returns OK.", @@ -27857,7 +27868,7 @@ "settings": {}, "uuid": "1ffc1ad1-5724-494a-9729-55029bf7de11" }, - "2668": { + "2669": { "varname": "nodebb_events_insecure", "caption": "Nodebb Events: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -27866,7 +27877,7 @@ "settings": {}, "uuid": "a1806236-5e79-4f25-a0d7-c99f006fbded" }, - "2669": { + "2670": { "varname": "nodebb_events_no_proxy", "caption": "Nodebb Events: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -27875,7 +27886,7 @@ "settings": {}, "uuid": "2a358b0b-204e-43fb-a6ea-cba994e65b9e" }, - "2670": { + "2671": { "varname": "nodebb_events_proxy", "caption": "Nodebb Events: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -27886,7 +27897,7 @@ }, "uuid": "832d3a4c-236d-47ef-a7a6-35f7c7568f6a" }, - "2671": { + "2672": { "varname": "nodebb_events_timeout", "caption": "Nodebb Events: Timeout", "description": "Network timeout in seconds.", @@ -27897,7 +27908,7 @@ }, "uuid": "7f768312-8005-4c32-9dfe-2ffddb19be34" }, - "2672": { + "2673": { "varname": "nodebb_events_token", "caption": "Nodebb Events: Token", "description": "NodeBB API bearer token.", @@ -27908,7 +27919,7 @@ }, "uuid": "a95b2a93-924b-4d52-a94f-0baa153a7042" }, - "2673": { + "2674": { "varname": "nodebb_events_url", "caption": "Nodebb Events: URL", "description": "NodeBB API URL.", @@ -27919,7 +27930,7 @@ }, "uuid": "3db4deeb-f952-48e9-a4b1-60d87330aa27" }, - "2674": { + "2675": { "varname": "nodebb_groups_always_ok", "caption": "Nodebb Groups: Always OK?", "description": "Always returns OK.", @@ -27928,7 +27939,7 @@ "settings": {}, "uuid": "77a80be9-db8d-4201-9b66-ea17900a1ba3" }, - "2675": { + "2676": { "varname": "nodebb_groups_insecure", "caption": "Nodebb Groups: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -27937,7 +27948,7 @@ "settings": {}, "uuid": "647a26a1-735c-42b8-bb0e-3dae5a4a81d1" }, - "2676": { + "2677": { "varname": "nodebb_groups_no_perfdata", "caption": "Nodebb Groups: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -27946,7 +27957,7 @@ "settings": {}, "uuid": "d78c6d16-5c00-4acb-b11b-5ab710cb2993" }, - "2677": { + "2678": { "varname": "nodebb_groups_no_proxy", "caption": "Nodebb Groups: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -27955,7 +27966,7 @@ "settings": {}, "uuid": "d400bc4f-cdc6-442e-8f53-231e13e79fe0" }, - "2678": { + "2679": { "varname": "nodebb_groups_proxy", "caption": "Nodebb Groups: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -27966,7 +27977,7 @@ }, "uuid": "0427e83e-0fe6-43d4-be35-5e03a890ce9c" }, - "2679": { + "2680": { "varname": "nodebb_groups_timeout", "caption": "Nodebb Groups: Timeout", "description": "Network timeout in seconds.", @@ -27977,7 +27988,7 @@ }, "uuid": "91a8370f-260a-48cc-8619-eb00e8742d74" }, - "2680": { + "2681": { "varname": "nodebb_groups_token", "caption": "Nodebb Groups: Token", "description": "NodeBB API bearer token.", @@ -27988,7 +27999,7 @@ }, "uuid": "64964307-8a09-4784-b6ad-5c7a5d241dce" }, - "2681": { + "2682": { "varname": "nodebb_groups_url", "caption": "Nodebb Groups: URL", "description": "NodeBB API URL.", @@ -27999,7 +28010,7 @@ }, "uuid": "8345d466-40fc-4119-8f96-ed7c731db50c" }, - "2682": { + "2683": { "varname": "nodebb_info_always_ok", "caption": "Nodebb Info: Always OK?", "description": "Always returns OK.", @@ -28008,7 +28019,7 @@ "settings": {}, "uuid": "b82047a8-b2a7-4ec6-8c43-a5957e92c0c4" }, - "2683": { + "2684": { "varname": "nodebb_info_critical", "caption": "Nodebb Info: Critical", "description": "CRIT threshold in percent.", @@ -28019,7 +28030,7 @@ }, "uuid": "51d54f85-4226-4b1f-b84a-ce0a6bb400dc" }, - "2684": { + "2685": { "varname": "nodebb_info_insecure", "caption": "Nodebb Info: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -28028,7 +28039,7 @@ "settings": {}, "uuid": "dcdc0b0f-9b16-4088-a437-41d4886e62cc" }, - "2685": { + "2686": { "varname": "nodebb_info_no_perfdata", "caption": "Nodebb Info: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -28037,7 +28048,7 @@ "settings": {}, "uuid": "ebdbddd8-be91-452a-b091-3b607a975000" }, - "2686": { + "2687": { "varname": "nodebb_info_no_proxy", "caption": "Nodebb Info: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -28046,7 +28057,7 @@ "settings": {}, "uuid": "4fe79f91-ffc3-47b0-9128-27e1ba91833e" }, - "2687": { + "2688": { "varname": "nodebb_info_proxy", "caption": "Nodebb Info: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -28057,7 +28068,7 @@ }, "uuid": "344bc10a-f9f7-4164-806a-f04dbce95ddc" }, - "2688": { + "2689": { "varname": "nodebb_info_timeout", "caption": "Nodebb Info: Timeout", "description": "Network timeout in seconds.", @@ -28068,7 +28079,7 @@ }, "uuid": "c51dbdad-f85a-406e-9e62-28e1f4c342ab" }, - "2689": { + "2690": { "varname": "nodebb_info_token", "caption": "Nodebb Info: Token", "description": "NodeBB API bearer token.", @@ -28079,7 +28090,7 @@ }, "uuid": "8f2debb2-5332-43cd-92ab-5f3f756049cb" }, - "2690": { + "2691": { "varname": "nodebb_info_url", "caption": "Nodebb Info: URL", "description": "NodeBB API URL.", @@ -28090,7 +28101,7 @@ }, "uuid": "27adb14e-7fda-4b4b-b899-27a1598848fa" }, - "2691": { + "2692": { "varname": "nodebb_info_warning", "caption": "Nodebb Info: Warning", "description": "WARN threshold in percent.", @@ -28101,7 +28112,7 @@ }, "uuid": "bb113d19-2447-4376-a6c9-6ce1fbf05f4e" }, - "2692": { + "2693": { "varname": "nodebb_users_always_ok", "caption": "Nodebb Users: Always OK?", "description": "Always returns OK.", @@ -28110,7 +28121,7 @@ "settings": {}, "uuid": "425851f2-f188-4202-b180-efbaa6d5f709" }, - "2693": { + "2694": { "varname": "nodebb_users_insecure", "caption": "Nodebb Users: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -28119,7 +28130,7 @@ "settings": {}, "uuid": "d21e0e88-da19-4199-ae76-11fd7952b028" }, - "2694": { + "2695": { "varname": "nodebb_users_no_perfdata", "caption": "Nodebb Users: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -28128,7 +28139,7 @@ "settings": {}, "uuid": "7d743065-b54b-415e-9399-b31780923ecb" }, - "2695": { + "2696": { "varname": "nodebb_users_no_proxy", "caption": "Nodebb Users: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -28137,7 +28148,7 @@ "settings": {}, "uuid": "f54a9fe1-31c5-4e7d-a52c-44dad7a0b3ad" }, - "2696": { + "2697": { "varname": "nodebb_users_proxy", "caption": "Nodebb Users: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -28148,7 +28159,7 @@ }, "uuid": "381d21b9-107f-4ab8-9786-b2ebf005cb39" }, - "2697": { + "2698": { "varname": "nodebb_users_severity", "caption": "Nodebb Users: Severity", "description": "Severity for alerts that do not depend on thresholds. One of \"warn\" or \"crit\".", @@ -28161,7 +28172,7 @@ }, "uuid": "70a5b22f-c812-4dbe-9542-13f73f4e0a44" }, - "2698": { + "2699": { "varname": "nodebb_users_timeout", "caption": "Nodebb Users: Timeout", "description": "Network timeout in seconds.", @@ -28172,7 +28183,7 @@ }, "uuid": "d75bd524-d34b-4d3b-a14f-48a969254299" }, - "2699": { + "2700": { "varname": "nodebb_users_token", "caption": "Nodebb Users: Token", "description": "NodeBB API bearer token.", @@ -28183,7 +28194,7 @@ }, "uuid": "16e14e09-2819-4f20-8ad5-5bd85bcc00aa" }, - "2700": { + "2701": { "varname": "nodebb_users_url", "caption": "Nodebb Users: URL", "description": "NodeBB API URL.", @@ -28194,7 +28205,7 @@ }, "uuid": "210470dc-12c3-49b0-8482-b6991c96c5b0" }, - "2701": { + "2702": { "varname": "nodebb_version_always_ok", "caption": "Nodebb Version: Always OK?", "description": "Always returns OK.", @@ -28203,7 +28214,7 @@ "settings": {}, "uuid": "71838dc7-e54d-4365-9ba8-f9a77f99c6ab" }, - "2702": { + "2703": { "varname": "nodebb_version_insecure", "caption": "Nodebb Version: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -28212,7 +28223,7 @@ "settings": {}, "uuid": "6f6598f3-e2a8-401c-9f89-ca016ff7a867" }, - "2703": { + "2704": { "varname": "nodebb_version_no_perfdata", "caption": "Nodebb Version: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -28221,7 +28232,7 @@ "settings": {}, "uuid": "5f6e487b-e5bf-4928-a74d-a39d86bd8b14" }, - "2704": { + "2705": { "varname": "nodebb_version_no_proxy", "caption": "Nodebb Version: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -28230,7 +28241,7 @@ "settings": {}, "uuid": "a89e616e-3ea7-4d12-a266-8cd62132b07f" }, - "2705": { + "2706": { "varname": "nodebb_version_proxy", "caption": "Nodebb Version: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -28241,7 +28252,7 @@ }, "uuid": "be57cb87-bf2c-4c31-a10b-52336d78c8f1" }, - "2706": { + "2707": { "varname": "nodebb_version_timeout", "caption": "Nodebb Version: Timeout", "description": "Network timeout in seconds.", @@ -28252,7 +28263,7 @@ }, "uuid": "30b15cb0-42ac-4688-ae51-bb2ecd80ca02" }, - "2707": { + "2708": { "varname": "nodebb_version_token", "caption": "Nodebb Version: Token", "description": "NodeBB API bearer token.", @@ -28263,7 +28274,7 @@ }, "uuid": "62000e64-b9be-4b7b-8aad-72ecb89631e9" }, - "2708": { + "2709": { "varname": "nodebb_version_url", "caption": "Nodebb Version: URL", "description": "NodeBB API URL.", @@ -28274,7 +28285,7 @@ }, "uuid": "eb1496b4-56e7-4595-b125-af3318baa9ec" }, - "2709": { + "2710": { "varname": "ntp_chronyd_always_ok", "caption": "NTP Chronyd: Always OK?", "description": "Always returns OK.", @@ -28283,7 +28294,7 @@ "settings": {}, "uuid": "a881e579-788c-4e12-b534-9706439d960b" }, - "2710": { + "2711": { "varname": "ntp_chronyd_critical", "caption": "NTP Chronyd: Critical", "description": "CRIT threshold for the offset of the system clock, fast or slow, in milliseconds. Supports Nagios ranges.", @@ -28294,7 +28305,7 @@ }, "uuid": "47e8b431-eaae-4136-8a70-350ce0ca1804" }, - "2711": { + "2712": { "varname": "ntp_chronyd_critical_age", "caption": "NTP Chronyd: Critical Age", "description": "CRIT threshold for the time since chronyd last synchronized the clock. A duration such as `30m`, `2h` or `1D`; `0D` disables it.", @@ -28305,7 +28316,7 @@ }, "uuid": "230eaa50-8e3e-4ff7-b3d5-4202cd3bae40" }, - "2712": { + "2713": { "varname": "ntp_chronyd_critical_sources", "caption": "NTP Chronyd: Critical Sources", "description": "CRIT threshold for the number of usable NTP sources. Supports Nagios ranges. Example: `--critical-sources=1:` alerts if no source is usable.", @@ -28316,7 +28327,7 @@ }, "uuid": "4c6e3307-3aa9-4376-88f1-28e1a28de64a" }, - "2713": { + "2714": { "varname": "ntp_chronyd_no_perfdata", "caption": "NTP Chronyd: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -28325,7 +28336,7 @@ "settings": {}, "uuid": "1f2acce9-aec0-4f26-8000-8fe52a926e60" }, - "2714": { + "2715": { "varname": "ntp_chronyd_stratum", "caption": "NTP Chronyd: Stratum", "description": "Warns if the stratum of this host is greater than or equal to this value. Stratum 1 indicates a computer with a locally attached reference clock. A computer that is synchronised to a stratum 1 computer is at stratum 2. A computer that is synchronised to a stratum 2 computer is at stratum 3, and so on.", @@ -28336,7 +28347,7 @@ }, "uuid": "61cac0f3-c41b-42f8-a11d-f255d74ece12" }, - "2715": { + "2716": { "varname": "ntp_chronyd_timeout", "caption": "NTP Chronyd: Timeout", "description": "Network timeout in seconds.", @@ -28347,7 +28358,7 @@ }, "uuid": "ec3a4ef3-47af-4629-8d62-10f97bd74f11" }, - "2716": { + "2717": { "varname": "ntp_chronyd_warning", "caption": "NTP Chronyd: Warning", "description": "WARN threshold for the offset of the system clock, fast or slow, in milliseconds. Supports Nagios ranges.", @@ -28358,7 +28369,7 @@ }, "uuid": "6d22436d-8b86-4ff4-a2ad-a74278f68204" }, - "2717": { + "2718": { "varname": "ntp_chronyd_warning_age", "caption": "NTP Chronyd: Warning Age", "description": "WARN threshold for the time since chronyd last synchronized the clock. A duration such as `30m`, `2h` or `1D`; `0D` disables it.", @@ -28369,7 +28380,7 @@ }, "uuid": "2969747d-33f2-4404-bb1c-ba948aeb2432" }, - "2718": { + "2719": { "varname": "ntp_chronyd_warning_sources", "caption": "NTP Chronyd: Warning Sources", "description": "WARN threshold for the number of usable NTP sources. Supports Nagios ranges. Example: `--warning-sources=2:` warns if fewer than two sources are usable, so a single remaining one does not go unnoticed.", @@ -28380,7 +28391,7 @@ }, "uuid": "bcd2057b-ad4a-4d93-83d0-51022cce322d" }, - "2719": { + "2720": { "varname": "ntp_ntpd_always_ok", "caption": "NTP Ntpd: Always OK?", "description": "Always returns OK.", @@ -28389,7 +28400,7 @@ "settings": {}, "uuid": "ca566900-ed18-4242-9ce8-98155ec8af92" }, - "2720": { + "2721": { "varname": "ntp_ntpd_critical", "caption": "NTP Ntpd: Critical", "description": "CRIT threshold for the offset of the system clock, fast or slow, in milliseconds. Supports Nagios ranges.", @@ -28400,7 +28411,7 @@ }, "uuid": "089be0f0-442c-4c43-aacd-49bf366f1301" }, - "2721": { + "2722": { "varname": "ntp_ntpd_critical_age", "caption": "NTP Ntpd: Critical Age", "description": "CRIT threshold for the time since ntpd last synchronized the clock. A duration such as `30m`, `2h` or `1D`; `0D` disables it.", @@ -28411,7 +28422,7 @@ }, "uuid": "e690d790-417c-40b9-af0a-791cd67f3f92" }, - "2722": { + "2723": { "varname": "ntp_ntpd_critical_sources", "caption": "NTP Ntpd: Critical Sources", "description": "CRIT threshold for the number of usable NTP sources. Supports Nagios ranges. Example: `--critical-sources=1:` alerts if no source is usable.", @@ -28422,7 +28433,7 @@ }, "uuid": "9bf172ad-5b38-41be-8044-8a9eb353d1b3" }, - "2723": { + "2724": { "varname": "ntp_ntpd_no_perfdata", "caption": "NTP Ntpd: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -28431,7 +28442,7 @@ "settings": {}, "uuid": "0406f40d-b393-4bed-a015-c0267f6fd74b" }, - "2724": { + "2725": { "varname": "ntp_ntpd_stratum", "caption": "NTP Ntpd: Stratum", "description": "Warns if the stratum of this host is greater than or equal to this value. Stratum 1 indicates a computer with a locally attached reference clock. A computer that is synchronised to a stratum 1 computer is at stratum 2. A computer that is synchronised to a stratum 2 computer is at stratum 3, and so on.", @@ -28442,7 +28453,7 @@ }, "uuid": "071f5ae6-4290-4a57-ae80-4e81efba332d" }, - "2725": { + "2726": { "varname": "ntp_ntpd_timeout", "caption": "NTP Ntpd: Timeout", "description": "Network timeout in seconds.", @@ -28453,7 +28464,7 @@ }, "uuid": "86cd173c-dd51-4119-b1ce-d22276db23df" }, - "2726": { + "2727": { "varname": "ntp_ntpd_warning", "caption": "NTP Ntpd: Warning", "description": "WARN threshold for the offset of the system clock, fast or slow, in milliseconds. Supports Nagios ranges.", @@ -28464,7 +28475,7 @@ }, "uuid": "ab7d61e1-be5c-4506-ab51-f5e1a93c2dcb" }, - "2727": { + "2728": { "varname": "ntp_ntpd_warning_age", "caption": "NTP Ntpd: Warning Age", "description": "WARN threshold for the time since ntpd last synchronized the clock. A duration such as `30m`, `2h` or `1D`; `0D` disables it.", @@ -28475,7 +28486,7 @@ }, "uuid": "1b3a6d71-5b5f-4240-83a0-1cf95f2b5c27" }, - "2728": { + "2729": { "varname": "ntp_ntpd_warning_sources", "caption": "NTP Ntpd: Warning Sources", "description": "WARN threshold for the number of usable NTP sources. Supports Nagios ranges. Example: `--warning-sources=2:` warns if fewer than two sources are usable, so a single remaining one does not go unnoticed.", @@ -28486,7 +28497,7 @@ }, "uuid": "a9de48a4-867c-41a2-a4da-5d2984acc584" }, - "2729": { + "2730": { "varname": "ntp_offset_always_ok", "caption": "NTP Offset: Always OK?", "description": "Always returns OK.", @@ -28495,7 +28506,7 @@ "settings": {}, "uuid": "65183cc7-ec63-4b17-97a9-ac8f2816226a" }, - "2730": { + "2731": { "varname": "ntp_offset_critical", "caption": "NTP Offset: Critical", "description": "CRIT threshold for the offset of the system clock, fast or slow, in milliseconds. Supports Nagios ranges.", @@ -28506,7 +28517,7 @@ }, "uuid": "caab2318-497a-492d-aeb7-cde32cb934c7" }, - "2731": { + "2732": { "varname": "ntp_offset_hostname", "caption": "NTP Offset: Hostname", "description": "NTP server to compare the system clock with. Hostname or IP address. `auto` takes the NTP server the local time service follows (chronyd, ntpd, systemd-timesyncd, W32Time).", @@ -28517,7 +28528,7 @@ }, "uuid": "b4501d6c-74d0-4159-b2bb-45a9b2ea6348" }, - "2732": { + "2733": { "varname": "ntp_offset_no_perfdata", "caption": "NTP Offset: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -28526,7 +28537,7 @@ "settings": {}, "uuid": "1dfed512-cba8-4aab-bc5f-745b3f3770b7" }, - "2733": { + "2734": { "varname": "ntp_offset_timeout", "caption": "NTP Offset: Timeout", "description": "Network timeout in seconds.", @@ -28537,7 +28548,7 @@ }, "uuid": "a90fb290-7f39-483a-8dda-19ccbc3326d8" }, - "2734": { + "2735": { "varname": "ntp_offset_warning", "caption": "NTP Offset: Warning", "description": "WARN threshold for the offset of the system clock, fast or slow, in milliseconds. Supports Nagios ranges.", @@ -28548,7 +28559,7 @@ }, "uuid": "3f8f782f-51b6-4f5f-bd17-a1b459e87581" }, - "2735": { + "2736": { "varname": "ntp_offset_windows_always_ok", "caption": "NTP Offset: Always OK?", "description": "Always returns OK.", @@ -28557,7 +28568,7 @@ "settings": {}, "uuid": "8a1a3f33-34c3-4f16-8011-5efcccae3d0e" }, - "2736": { + "2737": { "varname": "ntp_offset_windows_critical", "caption": "NTP Offset: Critical", "description": "CRIT threshold for the offset of the system clock, fast or slow, in milliseconds. Supports Nagios ranges.", @@ -28568,7 +28579,7 @@ }, "uuid": "4337fc64-9aad-4204-a6cf-2cf7e9bcb7bf" }, - "2737": { + "2738": { "varname": "ntp_offset_windows_hostname", "caption": "NTP Offset: Hostname", "description": "NTP server to compare the system clock with. Hostname or IP address. `auto` takes the NTP server the local time service follows (chronyd, ntpd, systemd-timesyncd, W32Time).", @@ -28579,7 +28590,7 @@ }, "uuid": "7026eb5b-332e-4bfe-af84-654e21bfce5c" }, - "2738": { + "2739": { "varname": "ntp_offset_windows_no_perfdata", "caption": "NTP Offset: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -28588,7 +28599,7 @@ "settings": {}, "uuid": "a57a2e11-9d6b-44c1-8c6f-a6361a3cc12e" }, - "2739": { + "2740": { "varname": "ntp_offset_windows_timeout", "caption": "NTP Offset: Timeout", "description": "Network timeout in seconds.", @@ -28599,7 +28610,7 @@ }, "uuid": "23da84d8-7066-4130-84b6-5aa072d50538" }, - "2740": { + "2741": { "varname": "ntp_offset_windows_warning", "caption": "NTP Offset: Warning", "description": "WARN threshold for the offset of the system clock, fast or slow, in milliseconds. Supports Nagios ranges.", @@ -28610,7 +28621,7 @@ }, "uuid": "23e53c75-8edc-4df2-a8b9-800d151f2001" }, - "2741": { + "2742": { "varname": "ntp_systemd_timesyncd_always_ok", "caption": "NTP Systemd Timesyncd: Always OK?", "description": "Always returns OK.", @@ -28619,7 +28630,7 @@ "settings": {}, "uuid": "077da322-47fe-4af6-a31a-74110cefb41e" }, - "2742": { + "2743": { "varname": "ntp_systemd_timesyncd_critical_age", "caption": "NTP Systemd Timesyncd: Critical Age", "description": "CRIT threshold for the time since systemd-timesyncd last synchronized the clock. A duration such as `30m`, `2h` or `1D`; `0D` disables it.", @@ -28630,7 +28641,7 @@ }, "uuid": "7aac571e-a2d4-49d6-80ea-0de130d57278" }, - "2743": { + "2744": { "varname": "ntp_systemd_timesyncd_no_perfdata", "caption": "NTP Systemd Timesyncd: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -28639,7 +28650,7 @@ "settings": {}, "uuid": "36a8843b-67ac-4a7a-b672-f337c98f3700" }, - "2744": { + "2745": { "varname": "ntp_systemd_timesyncd_stratum", "caption": "NTP Systemd Timesyncd: Stratum", "description": "Warns if the stratum of this host is greater than or equal to this value. Stratum 1 indicates a computer with a locally attached reference clock. A computer that is synchronised to a stratum 1 computer is at stratum 2. A computer that is synchronised to a stratum 2 computer is at stratum 3, and so on.", @@ -28650,7 +28661,7 @@ }, "uuid": "60f4ae4a-5675-4490-9b26-206bd442a7ef" }, - "2745": { + "2746": { "varname": "ntp_systemd_timesyncd_timeout", "caption": "NTP Systemd Timesyncd: Timeout", "description": "Network timeout in seconds.", @@ -28661,7 +28672,7 @@ }, "uuid": "59041362-56c4-42c7-9e35-c72faaa053a7" }, - "2746": { + "2747": { "varname": "ntp_systemd_timesyncd_warning_age", "caption": "NTP Systemd Timesyncd: Warning Age", "description": "WARN threshold for the time since systemd-timesyncd last synchronized the clock. A duration such as `30m`, `2h` or `1D`; `0D` disables it.", @@ -28672,7 +28683,7 @@ }, "uuid": "6959ec09-5f91-40be-8e49-a01c989659ff" }, - "2747": { + "2748": { "varname": "ntp_w32tm_windows_always_ok", "caption": "NTP W32Tm: Always OK?", "description": "Always returns OK.", @@ -28681,7 +28692,7 @@ "settings": {}, "uuid": "c101af72-794f-4cfa-b0d5-48b722ea9885" }, - "2748": { + "2749": { "varname": "ntp_w32tm_windows_critical", "caption": "NTP W32Tm: Critical", "description": "CRIT threshold for the offset of the system clock, fast or slow, in milliseconds. Supports Nagios ranges.", @@ -28692,7 +28703,7 @@ }, "uuid": "fa437e67-a3e6-430f-906c-ad6330db9ffa" }, - "2749": { + "2750": { "varname": "ntp_w32tm_windows_critical_age", "caption": "NTP W32Tm: Critical Age", "description": "CRIT threshold for the time since W32Time last synchronized the clock. A duration such as `30m`, `2h` or `1D`; `0D` disables it.", @@ -28703,7 +28714,7 @@ }, "uuid": "08e3409a-4c83-4564-8a7c-d2ecee75154b" }, - "2750": { + "2751": { "varname": "ntp_w32tm_windows_no_perfdata", "caption": "NTP W32Tm: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -28712,7 +28723,7 @@ "settings": {}, "uuid": "acc532ad-b96c-4a4b-8568-d07edd771ae1" }, - "2751": { + "2752": { "varname": "ntp_w32tm_windows_stratum", "caption": "NTP W32Tm: Stratum", "description": "Warns if the stratum of this host is greater than or equal to this value. Stratum 1 indicates a computer with a locally attached reference clock. A computer that is synchronised to a stratum 1 computer is at stratum 2. A computer that is synchronised to a stratum 2 computer is at stratum 3, and so on.", @@ -28723,7 +28734,7 @@ }, "uuid": "8f9f18cb-43d7-45df-99ac-3fc76a0d03a2" }, - "2752": { + "2753": { "varname": "ntp_w32tm_windows_timeout", "caption": "NTP W32Tm: Timeout", "description": "Network timeout in seconds.", @@ -28734,7 +28745,7 @@ }, "uuid": "8457b3d2-e360-411f-b813-978424265783" }, - "2753": { + "2754": { "varname": "ntp_w32tm_windows_warning", "caption": "NTP W32Tm: Warning", "description": "WARN threshold for the offset of the system clock, fast or slow, in milliseconds. Supports Nagios ranges.", @@ -28745,7 +28756,7 @@ }, "uuid": "308ec0c1-ec53-4f57-8f90-9078fa714248" }, - "2754": { + "2755": { "varname": "ntp_w32tm_windows_warning_age", "caption": "NTP W32Tm: Warning Age", "description": "WARN threshold for the time since W32Time last synchronized the clock. A duration such as `30m`, `2h` or `1D`; `0D` disables it.", @@ -28756,7 +28767,7 @@ }, "uuid": "97f5916c-b326-4010-b3e9-b97841ef8e02" }, - "2755": { + "2756": { "varname": "onlyoffice_stats_always_ok", "caption": "Onlyoffice Stats: Always OK?", "description": "Always returns OK.", @@ -28765,7 +28776,7 @@ "settings": {}, "uuid": "f1eb45fb-59ba-4cb1-ba55-f5beae693b9c" }, - "2756": { + "2757": { "varname": "onlyoffice_stats_insecure", "caption": "Onlyoffice Stats: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -28774,7 +28785,7 @@ "settings": {}, "uuid": "5b60f920-7d6b-4c92-a415-c453bf012709" }, - "2757": { + "2758": { "varname": "onlyoffice_stats_no_perfdata", "caption": "Onlyoffice Stats: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -28783,7 +28794,7 @@ "settings": {}, "uuid": "80b55b17-17d3-48de-8cdd-47bdd595b889" }, - "2758": { + "2759": { "varname": "onlyoffice_stats_no_proxy", "caption": "Onlyoffice Stats: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -28792,7 +28803,7 @@ "settings": {}, "uuid": "fcc54d2e-ebde-4b93-8226-4cabbcdc111a" }, - "2759": { + "2760": { "varname": "onlyoffice_stats_proxy", "caption": "Onlyoffice Stats: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -28803,7 +28814,7 @@ }, "uuid": "cef359bd-ea0c-4abf-b070-1b05b9a39253" }, - "2760": { + "2761": { "varname": "onlyoffice_stats_timeout", "caption": "Onlyoffice Stats: Timeout", "description": "Network timeout in seconds.", @@ -28814,7 +28825,7 @@ }, "uuid": "7d19ca52-8915-49b3-8a9f-d5620ca55a3e" }, - "2761": { + "2762": { "varname": "onlyoffice_stats_url", "caption": "Onlyoffice Stats: URL", "description": "OnlyOffice API URL.", @@ -28825,7 +28836,7 @@ }, "uuid": "46b090a7-ef90-4c8f-ba98-0310ca70f8c7" }, - "2762": { + "2763": { "varname": "openjdk_redhat_version_always_ok", "caption": "Openjdk Redhat Version: Always OK?", "description": "Always returns OK.", @@ -28834,7 +28845,7 @@ "settings": {}, "uuid": "f323176c-ad42-408e-b649-5127d6277037" }, - "2763": { + "2764": { "varname": "openjdk_redhat_version_check_major", "caption": "Openjdk Redhat Version: Check Major?", "description": "Alert when a new major release is available, even if the current version is not yet EOL. Example: running v26 (not yet EOL) and v27 is available.", @@ -28843,7 +28854,7 @@ "settings": {}, "uuid": "1c5d8884-761f-4367-9172-dece72b90b40" }, - "2764": { + "2765": { "varname": "openjdk_redhat_version_check_minor", "caption": "Openjdk Redhat Version: Check Minor?", "description": "Alert when a new major.minor release is available, even if the current version is not yet EOL. Example: running v26.2 (not yet EOL) and v26.3 is available.", @@ -28852,7 +28863,7 @@ "settings": {}, "uuid": "e15d2298-aeb0-469b-b799-639b58e8fe60" }, - "2765": { + "2766": { "varname": "openjdk_redhat_version_check_patch", "caption": "Openjdk Redhat Version: Check Patch?", "description": "Alert when a new major.minor.patch release is available, even if the current version is not yet EOL. Example: running v26.2.7 (not yet EOL) and v26.2.8 is available.", @@ -28861,7 +28872,7 @@ "settings": {}, "uuid": "908c54bd-e452-4396-97c0-a1806902a630" }, - "2766": { + "2767": { "varname": "openjdk_redhat_version_insecure", "caption": "Openjdk Redhat Version: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -28870,7 +28881,7 @@ "settings": {}, "uuid": "426f608f-8a61-48fd-bf71-c761f1192889" }, - "2767": { + "2768": { "varname": "openjdk_redhat_version_no_perfdata", "caption": "Openjdk Redhat Version: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -28879,7 +28890,7 @@ "settings": {}, "uuid": "32b34d9e-f7e8-492e-a94a-4d468e05cb62" }, - "2768": { + "2769": { "varname": "openjdk_redhat_version_no_proxy", "caption": "Openjdk Redhat Version: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -28888,7 +28899,7 @@ "settings": {}, "uuid": "209d5fae-e697-48cf-8491-74c2be7ecb4a" }, - "2769": { + "2770": { "varname": "openjdk_redhat_version_offset_eol", "caption": "Openjdk Redhat Version: Offset Eol", "description": "Alert n days before (\"-30\") or after an EOL date (\"30\" or \"+30\").", @@ -28899,7 +28910,7 @@ }, "uuid": "d8c1c0e6-b807-4d31-842f-2a64db5b857b" }, - "2770": { + "2771": { "varname": "openjdk_redhat_version_path", "caption": "Openjdk Redhat Version: Path", "description": "Local path to your Java binary.", @@ -28910,7 +28921,7 @@ }, "uuid": "182f4a5c-c249-408d-8561-4fe3051523e1" }, - "2771": { + "2772": { "varname": "openjdk_redhat_version_proxy", "caption": "Openjdk Redhat Version: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -28921,7 +28932,7 @@ }, "uuid": "e1a53480-3fdd-4cd9-9f39-ee5a02bb896e" }, - "2772": { + "2773": { "varname": "openjdk_redhat_version_timeout", "caption": "Openjdk Redhat Version: Timeout", "description": "Network timeout in seconds.", @@ -28932,7 +28943,7 @@ }, "uuid": "8ddb8389-952d-4f63-911b-40d8a47aeb2b" }, - "2773": { + "2774": { "varname": "openjdk_redhat_version_unreachable_severity", "caption": "Openjdk Redhat Version: Unreachable Severity", "description": "State to report when the online source is unreachable. What is used instead - bundled offline data, a cached copy, or nothing at all - is named in the output, and a clean result then only covers what that fallback could confirm.", @@ -28945,7 +28956,7 @@ }, "uuid": "436a5075-392b-4ea1-9702-9aa761e5cca2" }, - "2774": { + "2775": { "varname": "openstack_cinder_list_always_ok", "caption": "Openstack Cinder List: Always OK?", "description": "Always returns OK.", @@ -28954,7 +28965,7 @@ "settings": {}, "uuid": "ed299159-3db4-4b96-a0f1-40b918955ec8" }, - "2775": { + "2776": { "varname": "openstack_cinder_list_brief", "caption": "Openstack Cinder List: Brief?", "description": "Hide the rows that are within the thresholds and show only those in a WARN or CRIT state. Perfdata and alerting are unaffected: every item still emits performance data and still drives the overall check state, so this is safe to leave on.", @@ -28963,7 +28974,7 @@ "settings": {}, "uuid": "139c008e-0f07-4503-b27c-79fa2c2e4b52" }, - "2776": { + "2777": { "varname": "openstack_cinder_list_cache_expire", "caption": "Openstack Cinder List: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -28974,7 +28985,7 @@ }, "uuid": "8d25b427-803a-4352-9d81-85f5f8b13c8c" }, - "2777": { + "2778": { "varname": "openstack_cinder_list_grace_available", "caption": "Openstack Cinder List: Grace Available", "description": "How long a volume is tolerated in the `available` status before it counts towards the state. A volume is available for a moment after it was created and after it was detached; one that has been available for weeks is a forgotten volume that keeps costing money. Measured from the last status change the API reports. A duration such as `12h`, `8D` or `2W`; `0D` disables the grace period. Only applies while `available` is rated as something other than ok.", @@ -28985,7 +28996,7 @@ }, "uuid": "4db7697d-dc4c-4a6a-91b0-4e7005941e68" }, - "2778": { + "2779": { "varname": "openstack_cinder_list_ignore", "caption": "Openstack Cinder List: Ignore", "description": "Any item matching this Python regex will be ignored. Can be specified multiple times. Example: `(?i)linuxfabrik` for a case-insensitive match. Matched against the volume name.", @@ -28996,7 +29007,7 @@ }, "uuid": "912a911e-d18e-4a01-99dc-0d8a05ec655c" }, - "2779": { + "2780": { "varname": "openstack_cinder_list_ignore_type", "caption": "Openstack Cinder List: Ignore Type", "description": "Any item matching this Python regex will be ignored. Can be specified multiple times. Example: `(?i)linuxfabrik` for a case-insensitive match. Matched against the volume type, for example `ssd`.", @@ -29007,7 +29018,7 @@ }, "uuid": "51405f5f-b571-4472-9520-81c0e1ad7078" }, - "2780": { + "2781": { "varname": "openstack_cinder_list_ignore_zone", "caption": "Openstack Cinder List: Ignore Zone", "description": "Any item matching this Python regex will be ignored. Can be specified multiple times. Example: `(?i)linuxfabrik` for a case-insensitive match. Matched against the availability zone of the volume.", @@ -29018,7 +29029,7 @@ }, "uuid": "42699e0d-fe10-44f7-b1bd-7c6f795b2e69" }, - "2781": { + "2782": { "varname": "openstack_cinder_list_insecure", "caption": "Openstack Cinder List: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -29027,7 +29038,7 @@ "settings": {}, "uuid": "23bc92ef-a932-4a16-aa9c-9bb9cc12a1ab" }, - "2782": { + "2783": { "varname": "openstack_cinder_list_lengthy", "caption": "Openstack Cinder List: Lengthy?", "description": "Extended reporting.", @@ -29036,7 +29047,7 @@ "settings": {}, "uuid": "45c39fd7-6269-4387-81d6-61b0e5b7818b" }, - "2783": { + "2784": { "varname": "openstack_cinder_list_match", "caption": "Openstack Cinder List: Match", "description": "Filter by this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Examples: `(?i)example` to match \"example\" regardless of case. `^(?!.*example).*$` to match any string except \"example\" (negative lookahead). Matched against the volume name.", @@ -29047,7 +29058,7 @@ }, "uuid": "e6faf1df-74d3-4cc4-bccd-0ae09fc9addc" }, - "2784": { + "2785": { "varname": "openstack_cinder_list_match_type", "caption": "Openstack Cinder List: Match Type", "description": "Filter by this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Examples: `(?i)example` to match \"example\" regardless of case. `^(?!.*example).*$` to match any string except \"example\" (negative lookahead). Matched against the volume type, for example `ssd`.", @@ -29058,7 +29069,7 @@ }, "uuid": "ba141007-9bc7-46da-a10c-a0944fd353c8" }, - "2785": { + "2786": { "varname": "openstack_cinder_list_match_zone", "caption": "Openstack Cinder List: Match Zone", "description": "Filter by this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Examples: `(?i)example` to match \"example\" regardless of case. `^(?!.*example).*$` to match any string except \"example\" (negative lookahead). Matched against the availability zone of the volume.", @@ -29069,7 +29080,7 @@ }, "uuid": "ab2cce1c-d4eb-4810-91fd-5e92086a8376" }, - "2786": { + "2787": { "varname": "openstack_cinder_list_no_match_severity", "caption": "Openstack Cinder List: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -29082,7 +29093,7 @@ }, "uuid": "22e098cb-54a1-4aee-99c5-b25697fe335e" }, - "2787": { + "2788": { "varname": "openstack_cinder_list_no_perfdata", "caption": "Openstack Cinder List: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -29091,7 +29102,7 @@ "settings": {}, "uuid": "d0444b2a-89ea-4ff5-9dee-1ad34366d8ec" }, - "2788": { + "2789": { "varname": "openstack_cinder_list_no_proxy", "caption": "Openstack Cinder List: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -29100,7 +29111,7 @@ "settings": {}, "uuid": "f19ba4c3-36a2-4180-b265-815fd18f8da6" }, - "2789": { + "2790": { "varname": "openstack_cinder_list_proxy", "caption": "Openstack Cinder List: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -29111,7 +29122,7 @@ }, "uuid": "95287b07-4e08-463a-acdc-bda230d17700" }, - "2790": { + "2791": { "varname": "openstack_cinder_list_rc_file", "caption": "Openstack Cinder List: Rc File", "description": "Path to a rc file containing OpenStack connection parameters like OS_USERNAME (instead of specifying them on the command line). Example: `--rc-file=/var/spool/icinga2/.openstack.cnf`.", @@ -29122,7 +29133,7 @@ }, "uuid": "88901604-45ab-449f-8422-b02857060c1a" }, - "2791": { + "2792": { "varname": "openstack_cinder_list_severity", "caption": "Openstack Cinder List: Severity", "description": "State to report for volumes in a given status, as `STATUS,STATE`. STATUS is a Cinder volume status such as `available`, case-insensitive. STATE is one of `ok`, `warn`, `crit` or `unknown`. Overrides the built-in state for that status only, every other status keeps its default. Can be specified multiple times. Example: `--severity=available,warn --severity=maintenance,crit`", @@ -29133,7 +29144,7 @@ }, "uuid": "f529f7e9-6288-4435-82a1-71353531825e" }, - "2792": { + "2793": { "varname": "openstack_cinder_list_timeout", "caption": "Openstack Cinder List: Timeout", "description": "Network timeout in seconds. Applies to the whole run, not to a single request.", @@ -29144,7 +29155,7 @@ }, "uuid": "9782a76a-38ca-46e8-ba6d-bd955cf56d3f" }, - "2793": { + "2794": { "varname": "openstack_nova_list_always_ok", "caption": "Openstack Nova List: Always OK?", "description": "Always returns OK.", @@ -29153,7 +29164,7 @@ "settings": {}, "uuid": "a47efdcb-cc96-487c-a1ef-fa8de770d19b" }, - "2794": { + "2795": { "varname": "openstack_nova_list_brief", "caption": "Openstack Nova List: Brief?", "description": "Hide the rows that are within the thresholds and show only those in a WARN or CRIT state. Perfdata and alerting are unaffected: every item still emits performance data and still drives the overall check state, so this is safe to leave on.", @@ -29162,7 +29173,7 @@ "settings": {}, "uuid": "8cdc0dac-f96a-4bc0-9744-1b8c55e6b962" }, - "2795": { + "2796": { "varname": "openstack_nova_list_cache_expire", "caption": "Openstack Nova List: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -29173,7 +29184,7 @@ }, "uuid": "ce87f435-a564-454c-b07e-431e13f48c0d" }, - "2796": { + "2797": { "varname": "openstack_nova_list_ignore", "caption": "Openstack Nova List: Ignore", "description": "Any item matching this Python regex will be ignored. Can be specified multiple times. Example: `(?i)linuxfabrik` for a case-insensitive match. Matched against the instance name.", @@ -29184,7 +29195,7 @@ }, "uuid": "82b262f9-2c78-45d4-9c3c-34cef8df66b9" }, - "2797": { + "2798": { "varname": "openstack_nova_list_ignore_host", "caption": "Openstack Nova List: Ignore Host", "description": "Any item matching this Python regex will be ignored. Can be specified multiple times. Example: `(?i)linuxfabrik` for a case-insensitive match. Matched against the compute host the instance runs on.", @@ -29195,7 +29206,7 @@ }, "uuid": "36905a5f-2bc0-436a-967d-669a79dbbf9f" }, - "2798": { + "2799": { "varname": "openstack_nova_list_ignore_vm_state", "caption": "Openstack Nova List: Ignore VM State", "description": "Any item matching this Python regex will be ignored. Can be specified multiple times. Example: `(?i)linuxfabrik` for a case-insensitive match. Matched against the VM state, which is the lower-case stable state the server status is derived from, for example `active` or `stopped`.", @@ -29206,7 +29217,7 @@ }, "uuid": "2d8bd219-8b0d-4c39-8615-36d0b9fa9c80" }, - "2799": { + "2800": { "varname": "openstack_nova_list_ignore_zone", "caption": "Openstack Nova List: Ignore Zone", "description": "Any item matching this Python regex will be ignored. Can be specified multiple times. Example: `(?i)linuxfabrik` for a case-insensitive match. Matched against the availability zone of the instance.", @@ -29217,7 +29228,7 @@ }, "uuid": "90d90705-8170-422c-9e97-21cc50b1a78d" }, - "2800": { + "2801": { "varname": "openstack_nova_list_insecure", "caption": "Openstack Nova List: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -29226,7 +29237,7 @@ "settings": {}, "uuid": "09644f99-ded7-4bfd-aade-18570790aa19" }, - "2801": { + "2802": { "varname": "openstack_nova_list_lengthy", "caption": "Openstack Nova List: Lengthy?", "description": "Extended reporting.", @@ -29235,7 +29246,7 @@ "settings": {}, "uuid": "872b091a-c789-412a-ae25-438d86f0c747" }, - "2802": { + "2803": { "varname": "openstack_nova_list_match", "caption": "Openstack Nova List: Match", "description": "Filter by this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Examples: `(?i)example` to match \"example\" regardless of case. `^(?!.*example).*$` to match any string except \"example\" (negative lookahead). Matched against the instance name.", @@ -29246,7 +29257,7 @@ }, "uuid": "3b0b9ae6-0801-49c4-8d1f-0eba8c7aee26" }, - "2803": { + "2804": { "varname": "openstack_nova_list_match_host", "caption": "Openstack Nova List: Match Host", "description": "Filter by this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Examples: `(?i)example` to match \"example\" regardless of case. `^(?!.*example).*$` to match any string except \"example\" (negative lookahead). Matched against the compute host the instance runs on.", @@ -29257,7 +29268,7 @@ }, "uuid": "a702a8a3-3647-49a1-8408-72b2419c2ab3" }, - "2804": { + "2805": { "varname": "openstack_nova_list_match_vm_state", "caption": "Openstack Nova List: Match VM State", "description": "Filter by this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Examples: `(?i)example` to match \"example\" regardless of case. `^(?!.*example).*$` to match any string except \"example\" (negative lookahead). Matched against the VM state, which is the lower-case stable state the server status is derived from, for example `active` or `stopped`.", @@ -29268,7 +29279,7 @@ }, "uuid": "22bc87f9-8c68-42c7-b67e-86f218ba32d9" }, - "2805": { + "2806": { "varname": "openstack_nova_list_match_zone", "caption": "Openstack Nova List: Match Zone", "description": "Filter by this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Examples: `(?i)example` to match \"example\" regardless of case. `^(?!.*example).*$` to match any string except \"example\" (negative lookahead). Matched against the availability zone of the instance.", @@ -29279,7 +29290,7 @@ }, "uuid": "62e5bbc3-8b92-44fe-ba2b-3dbd95f84a87" }, - "2806": { + "2807": { "varname": "openstack_nova_list_no_match_severity", "caption": "Openstack Nova List: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -29292,7 +29303,7 @@ }, "uuid": "9dd11aae-240b-415e-a263-3af11fd5f7dc" }, - "2807": { + "2808": { "varname": "openstack_nova_list_no_perfdata", "caption": "Openstack Nova List: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -29301,7 +29312,7 @@ "settings": {}, "uuid": "da136279-3f68-41eb-a5aa-f5cc0bb39416" }, - "2808": { + "2809": { "varname": "openstack_nova_list_no_proxy", "caption": "Openstack Nova List: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -29310,7 +29321,7 @@ "settings": {}, "uuid": "5c79ecb6-e711-4a23-b8d4-f8e63184e36a" }, - "2809": { + "2810": { "varname": "openstack_nova_list_power_mismatch_severity", "caption": "Openstack Nova List: Power Mismatch Severity", "description": "State to report for an instance Nova lists as ACTIVE while the hypervisor last reported it as anything but running, for example paused, shut down or gone. The Nova status never shows this, and Nova does not correct all of these cases by itself. Use `crit` on a cloud where such an instance is an outage.", @@ -29323,7 +29334,7 @@ }, "uuid": "fdf6085d-956a-4f5d-acff-baf0b3ee7ddd" }, - "2810": { + "2811": { "varname": "openstack_nova_list_proxy", "caption": "Openstack Nova List: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -29334,7 +29345,7 @@ }, "uuid": "ec0c1f13-e543-4e7a-a096-e6d42236ad2b" }, - "2811": { + "2812": { "varname": "openstack_nova_list_rc_file", "caption": "Openstack Nova List: Rc File", "description": "Path to a rc file containing OpenStack connection parameters like OS_USERNAME (instead of specifying them on the command line). Example: `--rc-file=/var/spool/icinga2/.openstack.cnf`.", @@ -29345,7 +29356,7 @@ }, "uuid": "3f888410-5f40-4878-8e55-0855238ac7cc" }, - "2812": { + "2813": { "varname": "openstack_nova_list_severity", "caption": "Openstack Nova List: Severity", "description": "State to report for instances in a given Nova status, as `STATUS,STATE`. STATUS is a Nova server status such as `SHUTOFF`, case-insensitive. STATE is one of `ok`, `warn`, `crit` or `unknown`. Overrides the built-in state for that status only, every other status keeps its default. Can be specified multiple times. Example: `--severity=SHUTOFF,warn --severity=BUILD,ok`", @@ -29356,7 +29367,7 @@ }, "uuid": "bf8ebf27-b82c-4218-84ae-a6c3f1c05c28" }, - "2813": { + "2814": { "varname": "openstack_nova_list_timeout", "caption": "Openstack Nova List: Timeout", "description": "Network timeout in seconds. Applies to the whole run, not to a single request.", @@ -29367,7 +29378,7 @@ }, "uuid": "56c38e3c-c405-4b78-8a79-231e0cd95954" }, - "2814": { + "2815": { "varname": "openstack_quota_always_ok", "caption": "Openstack Quota: Always OK?", "description": "Always returns OK.", @@ -29376,7 +29387,7 @@ "settings": {}, "uuid": "deffdabe-27ea-4c1d-bb67-7cee21bd13be" }, - "2815": { + "2816": { "varname": "openstack_quota_brief", "caption": "Openstack Quota: Brief?", "description": "Hide the rows that are within the thresholds and show only those in a WARN or CRIT state. Perfdata and alerting are unaffected: every item still emits performance data and still drives the overall check state, so this is safe to leave on.", @@ -29385,7 +29396,7 @@ "settings": {}, "uuid": "13c7fd65-fb97-49a9-a5e5-1d8619af7c3a" }, - "2816": { + "2817": { "varname": "openstack_quota_cache_expire", "caption": "Openstack Quota: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -29396,7 +29407,7 @@ }, "uuid": "96cf5a84-277d-4113-8180-487055065642" }, - "2817": { + "2818": { "varname": "openstack_quota_critical", "caption": "Openstack Quota: Critical", "description": "CRIT threshold for the share of a quota that is in use, in percent. Only applies to a quota that has a limit. Supports Nagios ranges.", @@ -29407,7 +29418,7 @@ }, "uuid": "8656ce5f-fd37-4fd7-a6f0-ae4b0cd15051" }, - "2818": { + "2819": { "varname": "openstack_quota_ignore", "caption": "Openstack Quota: Ignore", "description": "Any item matching this Python regex will be ignored. Can be specified multiple times. Example: `(?i)linuxfabrik` for a case-insensitive match. Matched against the quota name, which is the resource prefixed with its service, for example `compute_cores` or `network_port`.", @@ -29418,7 +29429,7 @@ }, "uuid": "af2e0000-a3cd-4a34-8538-1f07bf747d9d" }, - "2819": { + "2820": { "varname": "openstack_quota_insecure", "caption": "Openstack Quota: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -29427,7 +29438,7 @@ "settings": {}, "uuid": "cf2cf073-374a-460e-a9f0-6876d22d8b53" }, - "2820": { + "2821": { "varname": "openstack_quota_lengthy", "caption": "Openstack Quota: Lengthy?", "description": "Extended reporting.", @@ -29436,7 +29447,7 @@ "settings": {}, "uuid": "d6463004-1fd2-4520-adc3-6c15b5ebeef1" }, - "2821": { + "2822": { "varname": "openstack_quota_match", "caption": "Openstack Quota: Match", "description": "Filter by this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Examples: `(?i)example` to match \"example\" regardless of case. `^(?!.*example).*$` to match any string except \"example\" (negative lookahead). Matched against the quota name, which is the resource prefixed with its service, for example `compute_cores` or `network_port`.", @@ -29447,7 +29458,7 @@ }, "uuid": "3fe563d9-271c-46d2-83ce-755e4971f028" }, - "2822": { + "2823": { "varname": "openstack_quota_no_match_severity", "caption": "Openstack Quota: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -29460,7 +29471,7 @@ }, "uuid": "c3352499-5853-4b11-a5fc-4bbc2ca444d3" }, - "2823": { + "2824": { "varname": "openstack_quota_no_perfdata", "caption": "Openstack Quota: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -29469,7 +29480,7 @@ "settings": {}, "uuid": "f5f659b4-c427-4831-8b8f-7b71ada9a769" }, - "2824": { + "2825": { "varname": "openstack_quota_no_proxy", "caption": "Openstack Quota: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -29478,7 +29489,7 @@ "settings": {}, "uuid": "018cd8e9-1516-4fb9-a3ad-b15e4049748e" }, - "2825": { + "2826": { "varname": "openstack_quota_proxy", "caption": "Openstack Quota: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -29489,7 +29500,7 @@ }, "uuid": "6229e0ec-e02c-477a-b06c-e0f7b713badf" }, - "2826": { + "2827": { "varname": "openstack_quota_rc_file", "caption": "Openstack Quota: Rc File", "description": "Path to a rc file containing OpenStack connection parameters like OS_USERNAME (instead of specifying them on the command line). Example: `--rc-file=/var/spool/icinga2/.openstack.cnf`.", @@ -29500,7 +29511,7 @@ }, "uuid": "6f0c382d-8ab0-4fbe-84a3-7cb11955a677" }, - "2827": { + "2828": { "varname": "openstack_quota_service", "caption": "Openstack Quota: Service", "description": "OpenStack service to report the quotas of. Can be specified multiple times. A service that does not answer is reported as a warning, so name the ones this cloud actually runs. Example: `--service=compute --service=network`. If not specified, all of them are checked.", @@ -29513,7 +29524,7 @@ }, "uuid": "9627ea47-3ca6-4532-8fb5-61fac0abb497" }, - "2828": { + "2829": { "varname": "openstack_quota_timeout", "caption": "Openstack Quota: Timeout", "description": "Network timeout in seconds. Applies to the whole run, not to a single request.", @@ -29524,7 +29535,7 @@ }, "uuid": "f622b081-c131-4edb-89e6-ef339d62cd09" }, - "2829": { + "2830": { "varname": "openstack_quota_warning", "caption": "Openstack Quota: Warning", "description": "WARN threshold for the share of a quota that is in use, in percent. Only applies to a quota that has a limit. Supports Nagios ranges.", @@ -29535,7 +29546,7 @@ }, "uuid": "f996dcf5-9ab8-43fa-ba14-06261cc36e2f" }, - "2830": { + "2831": { "varname": "openstack_swift_stat_always_ok", "caption": "Openstack Swift Stat: Always OK?", "description": "Always returns OK.", @@ -29544,7 +29555,7 @@ "settings": {}, "uuid": "4ecf6873-9c6b-470c-bb83-da31e79735ce" }, - "2831": { + "2832": { "varname": "openstack_swift_stat_brief", "caption": "Openstack Swift Stat: Brief?", "description": "Hide the rows that are within the thresholds and show only those in a WARN or CRIT state. Perfdata and alerting are unaffected: every item still emits performance data and still drives the overall check state, so this is safe to leave on.", @@ -29553,7 +29564,7 @@ "settings": {}, "uuid": "828c8fa9-84bf-44a0-ab2b-4f988d3486cc" }, - "2832": { + "2833": { "varname": "openstack_swift_stat_cache_expire", "caption": "Openstack Swift Stat: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -29564,7 +29575,7 @@ }, "uuid": "d0bdb7da-917c-4da8-8fb1-8c6106e501a5" }, - "2833": { + "2834": { "varname": "openstack_swift_stat_critical", "caption": "Openstack Swift Stat: Critical", "description": "CRIT threshold for remaining free space, in GiB. Only applies to containers that have a quota set.", @@ -29575,7 +29586,7 @@ }, "uuid": "fdcfa197-d988-4c83-856b-99368bdee9f3" }, - "2834": { + "2835": { "varname": "openstack_swift_stat_critical_count", "caption": "Openstack Swift Stat: Critical Count", "description": "CRIT threshold for the remaining number of objects a container may still take. Only applies to containers that have an object count quota set.", @@ -29586,7 +29597,7 @@ }, "uuid": "f8476b3e-2ae8-4b60-bd36-2975db8055ae" }, - "2835": { + "2836": { "varname": "openstack_swift_stat_ignore", "caption": "Openstack Swift Stat: Ignore", "description": "Any item matching this Python regex will be ignored. Can be specified multiple times. Example: `(?i)linuxfabrik` for a case-insensitive match. Matched against the container name.", @@ -29597,7 +29608,7 @@ }, "uuid": "85657700-1c01-4b5f-aacc-f4c5f849ed99" }, - "2836": { + "2837": { "varname": "openstack_swift_stat_insecure", "caption": "Openstack Swift Stat: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -29606,7 +29617,7 @@ "settings": {}, "uuid": "802ba637-ca96-4d39-90c8-9723344bc869" }, - "2837": { + "2838": { "varname": "openstack_swift_stat_lengthy", "caption": "Openstack Swift Stat: Lengthy?", "description": "Extended reporting.", @@ -29615,7 +29626,7 @@ "settings": {}, "uuid": "e334df9b-c7a0-42ed-9ef2-de032ed72f96" }, - "2838": { + "2839": { "varname": "openstack_swift_stat_match", "caption": "Openstack Swift Stat: Match", "description": "Filter by this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Examples: `(?i)example` to match \"example\" regardless of case. `^(?!.*example).*$` to match any string except \"example\" (negative lookahead). Matched against the container name.", @@ -29626,7 +29637,7 @@ }, "uuid": "0077550a-f7ed-4b34-8325-92720485a3e6" }, - "2839": { + "2840": { "varname": "openstack_swift_stat_no_match_severity", "caption": "Openstack Swift Stat: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -29639,7 +29650,7 @@ }, "uuid": "f675bd33-caf0-4633-acd4-d28c9b4a9501" }, - "2840": { + "2841": { "varname": "openstack_swift_stat_no_perfdata", "caption": "Openstack Swift Stat: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -29648,7 +29659,7 @@ "settings": {}, "uuid": "30311b0c-b005-4943-aa48-1ecccef0ee98" }, - "2841": { + "2842": { "varname": "openstack_swift_stat_no_proxy", "caption": "Openstack Swift Stat: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -29657,7 +29668,7 @@ "settings": {}, "uuid": "fe9aa6de-6489-4de4-b4f7-f3e4f963a803" }, - "2842": { + "2843": { "varname": "openstack_swift_stat_proxy", "caption": "Openstack Swift Stat: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -29668,7 +29679,7 @@ }, "uuid": "cbee3f68-3384-47eb-bff7-207ad8577587" }, - "2843": { + "2844": { "varname": "openstack_swift_stat_rc_file", "caption": "Openstack Swift Stat: Rc File", "description": "Path to a rc file containing OpenStack connection parameters like OS_USERNAME (instead of specifying them on the command line). Example: `--rc-file=/var/spool/icinga2/.openstack.cnf`.", @@ -29679,7 +29690,7 @@ }, "uuid": "82bbe4ec-0447-443f-96d7-eb7c0b2d9325" }, - "2844": { + "2845": { "varname": "openstack_swift_stat_timeout", "caption": "Openstack Swift Stat: Timeout", "description": "Network timeout in seconds. Applies to the whole run, not to a single request.", @@ -29690,7 +29701,7 @@ }, "uuid": "5381aead-532b-4161-9af8-8e1025060b92" }, - "2845": { + "2846": { "varname": "openstack_swift_stat_warning", "caption": "Openstack Swift Stat: Warning", "description": "WARN threshold for remaining free space, in GiB. Only applies to containers that have a quota set.", @@ -29701,7 +29712,7 @@ }, "uuid": "e144fa43-88c7-4093-b041-1af6348bfbaa" }, - "2846": { + "2847": { "varname": "openstack_swift_stat_warning_count", "caption": "Openstack Swift Stat: Warning Count", "description": "WARN threshold for the remaining number of objects a container may still take. Only applies to containers that have an object count quota set.", @@ -29712,7 +29723,7 @@ }, "uuid": "2c14817c-0468-4608-b710-c2a5f39ad447" }, - "2847": { + "2848": { "varname": "openvpn_client_list_always_ok", "caption": "OpenVPN Client List: Always OK?", "description": "Always returns OK.", @@ -29721,7 +29732,7 @@ "settings": {}, "uuid": "69128a55-0e10-4702-975d-d845db709770" }, - "2848": { + "2849": { "varname": "openvpn_client_list_critical", "caption": "OpenVPN Client List: Critical", "description": "CRIT threshold for the number of connected clients. Supports Nagios ranges.", @@ -29732,7 +29743,7 @@ }, "uuid": "c4b359e9-11f2-4784-8369-df1d5024f64e" }, - "2849": { + "2850": { "varname": "openvpn_client_list_filename", "caption": "OpenVPN Client List: Filename", "description": "Path to the OpenVPN status log file.", @@ -29743,7 +29754,7 @@ }, "uuid": "cb646c3e-1803-4758-8c0a-7dac4b035543" }, - "2850": { + "2851": { "varname": "openvpn_client_list_no_perfdata", "caption": "OpenVPN Client List: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -29752,7 +29763,7 @@ "settings": {}, "uuid": "f8d21bd5-f1f4-4392-89dd-c1bc520e9f5a" }, - "2851": { + "2852": { "varname": "openvpn_client_list_warning", "caption": "OpenVPN Client List: Warning", "description": "WARN threshold for the number of connected clients. Supports Nagios ranges.", @@ -29763,7 +29774,7 @@ }, "uuid": "b3dd5846-d89a-40fb-bf0d-8de358345af0" }, - "2852": { + "2853": { "varname": "openvpn_version_always_ok", "caption": "OpenVPN Version: Always OK?", "description": "Always returns OK.", @@ -29772,7 +29783,7 @@ "settings": {}, "uuid": "2c0bade6-538e-46c1-89c2-0e6198c45cae" }, - "2853": { + "2854": { "varname": "openvpn_version_check_major", "caption": "OpenVPN Version: Check Major?", "description": "Alert when a new major release is available, even if the current version is not yet EOL. Example: running v26 (not yet EOL) and v27 is available.", @@ -29781,7 +29792,7 @@ "settings": {}, "uuid": "9ee894f5-952a-4c60-a574-51b315d7aee4" }, - "2854": { + "2855": { "varname": "openvpn_version_check_minor", "caption": "OpenVPN Version: Check Minor?", "description": "Alert when a new major.minor release is available, even if the current version is not yet EOL. Example: running v26.2 (not yet EOL) and v26.3 is available.", @@ -29790,7 +29801,7 @@ "settings": {}, "uuid": "57872e72-6fdb-444f-8870-75992f11d6fb" }, - "2855": { + "2856": { "varname": "openvpn_version_check_patch", "caption": "OpenVPN Version: Check Patch?", "description": "Alert when a new major.minor.patch release is available, even if the current version is not yet EOL. Example: running v26.2.7 (not yet EOL) and v26.2.8 is available.", @@ -29799,7 +29810,7 @@ "settings": {}, "uuid": "f21d6e48-ad90-4171-b2d7-26bc1514be5e" }, - "2856": { + "2857": { "varname": "openvpn_version_insecure", "caption": "OpenVPN Version: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -29808,7 +29819,7 @@ "settings": {}, "uuid": "4c0015cc-32f8-4f10-9b83-89105d8650af" }, - "2857": { + "2858": { "varname": "openvpn_version_no_perfdata", "caption": "OpenVPN Version: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -29817,7 +29828,7 @@ "settings": {}, "uuid": "3a348157-920f-4574-9dcf-c0aa6b32601a" }, - "2858": { + "2859": { "varname": "openvpn_version_no_proxy", "caption": "OpenVPN Version: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -29826,7 +29837,7 @@ "settings": {}, "uuid": "760b74dc-0bb5-4fa6-9436-f1667fc76c7b" }, - "2859": { + "2860": { "varname": "openvpn_version_offset_eol", "caption": "OpenVPN Version: Offset Eol", "description": "Alert n days before (\"-30\") or after an EOL date (\"30\" or \"+30\").", @@ -29837,7 +29848,7 @@ }, "uuid": "2f3b8c6b-57b6-4672-ab49-2f870a8bfcf7" }, - "2860": { + "2861": { "varname": "openvpn_version_path", "caption": "OpenVPN Version: Path", "description": "Local path to your OpenVPN binary.", @@ -29848,7 +29859,7 @@ }, "uuid": "2f4a0067-4400-4683-8037-88f94227ce9c" }, - "2861": { + "2862": { "varname": "openvpn_version_proxy", "caption": "OpenVPN Version: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -29859,7 +29870,7 @@ }, "uuid": "64977492-80de-4c92-9faa-665957c81116" }, - "2862": { + "2863": { "varname": "openvpn_version_timeout", "caption": "OpenVPN Version: Timeout", "description": "Network timeout in seconds.", @@ -29870,7 +29881,7 @@ }, "uuid": "220a662a-2586-4d7a-905c-c7d7e39d9bab" }, - "2863": { + "2864": { "varname": "openvpn_version_unreachable_severity", "caption": "OpenVPN Version: Unreachable Severity", "description": "State to report when the online source is unreachable. What is used instead - bundled offline data, a cached copy, or nothing at all - is named in the output, and a clean result then only covers what that fallback could confirm.", @@ -29883,7 +29894,7 @@ }, "uuid": "5beb8caa-012e-4dc5-910e-dee0385dcde9" }, - "2864": { + "2865": { "varname": "path_rw_test_always_ok", "caption": "Path RW Test: Always OK?", "description": "Always returns OK.", @@ -29892,7 +29903,7 @@ "settings": {}, "uuid": "3da6dfb3-63b4-4521-b8f6-633edd9fc0e3" }, - "2865": { + "2866": { "varname": "path_rw_test_path", "caption": "Path RW Test: Path", "description": "Path to test for read/write access by creating and deleting a temporary file. Can be specified multiple times.", @@ -29903,7 +29914,7 @@ }, "uuid": "6f80bd32-0b34-4930-a7d1-50863013b047" }, - "2866": { + "2867": { "varname": "path_rw_test_severity", "caption": "Path RW Test: Severity", "description": "Severity for alerting.", @@ -29916,7 +29927,7 @@ }, "uuid": "24862773-1f7f-415c-bc26-b2d229055b3f" }, - "2867": { + "2868": { "varname": "path_rw_test_timeout", "caption": "Path RW Test: Timeout", "description": "How long a path gets to answer before it is reported as unreachable. Every path is tested at the same time and they share one deadline, so this is the runtime of the whole check and not a budget per path.", @@ -29927,7 +29938,7 @@ }, "uuid": "98444b83-0301-4d3e-ac33-adda3dd986bf" }, - "2868": { + "2869": { "varname": "path_rw_test_windows_always_ok", "caption": "Path RW Test: Always OK?", "description": "Always returns OK.", @@ -29936,7 +29947,7 @@ "settings": {}, "uuid": "9b87d0c0-7a1e-46bd-8427-52cde5789ac7" }, - "2869": { + "2870": { "varname": "path_rw_test_windows_path", "caption": "Path RW Test: Path", "description": "Path to test for read/write access by creating and deleting a temporary file. Can be specified multiple times.", @@ -29947,7 +29958,7 @@ }, "uuid": "79938d65-9f58-4ce3-88ef-48b8a3122f3e" }, - "2870": { + "2871": { "varname": "path_rw_test_windows_severity", "caption": "Path RW Test: Severity", "description": "Severity for alerting.", @@ -29960,7 +29971,7 @@ }, "uuid": "2f0f3ad0-32bd-4feb-8fd6-5628d4227486" }, - "2871": { + "2872": { "varname": "path_rw_test_windows_timeout", "caption": "Path RW Test: Timeout", "description": "How long a path gets to answer before it is reported as unreachable. Every path is tested at the same time and they share one deadline, so this is the runtime of the whole check and not a budget per path.", @@ -29971,7 +29982,7 @@ }, "uuid": "56bf3ed0-6c0b-4454-9438-d0af1bb65dfa" }, - "2872": { + "2873": { "varname": "php_fpm_logfile_always_ok", "caption": "PHP-FPM Logfile: Always OK?", "description": "Always returns OK.", @@ -29980,7 +29991,7 @@ "settings": {}, "uuid": "8b3757c6-1a57-40a3-9f44-47a103ccf133" }, - "2873": { + "2874": { "varname": "php_fpm_logfile_critical_level", "caption": "PHP-FPM Logfile: Critical Level", "description": "Least severe PHP-FPM log level that returns CRITICAL. Each level includes everything more severe than itself, so `WARNING` covers `ERROR` and `ALERT` as well. Case-sensitive. `none` lets no level return CRITICAL, which leaves the events this check names as the only way to reach it. Example: `--critical-level=WARNING`.", @@ -29993,7 +30004,7 @@ }, "uuid": "65452e80-4103-4dec-acfe-137d86643c42" }, - "2874": { + "2875": { "varname": "php_fpm_logfile_fatal_errors_critical", "caption": "PHP-FPM Logfile: Fatal Errors Critical", "description": "Number of PHP fatal errors in the `error_log` of the pools within `--lookback` that returns CRITICAL. 0 turns the threshold off. Example: `--fatal-errors-critical=50`.", @@ -30004,7 +30015,7 @@ }, "uuid": "c601038d-d8ba-4b43-866d-189646aa7e8f" }, - "2875": { + "2876": { "varname": "php_fpm_logfile_fatal_errors_warning", "caption": "PHP-FPM Logfile: Fatal Errors Warning", "description": "Number of PHP fatal errors in the `error_log` of the pools within `--lookback` that returns WARNING. 0 turns the threshold off. Example: `--fatal-errors-warning=1`.", @@ -30015,7 +30026,7 @@ }, "uuid": "25d3aa7a-3cf0-42ef-8816-e01b054d3206" }, - "2876": { + "2877": { "varname": "php_fpm_logfile_icinga_callback", "caption": "PHP-FPM Logfile: Icinga Callback?", "description": "Ask the monitoring server whether the service running this check is acknowledged. Where it is, what this run reports is remembered as already handled, so it no longer raises an alert on the following runs. Requires `--icinga-url`, `--icinga-username`, `--icinga-password` and `--icinga-service-name`.", @@ -30024,7 +30035,7 @@ "settings": {}, "uuid": "3303f03c-8005-4382-9600-bbf98a6f81ab" }, - "2877": { + "2878": { "varname": "php_fpm_logfile_icinga_password", "caption": "PHP-FPM Logfile: Icinga Password", "description": "Monitoring server API password.", @@ -30035,7 +30046,7 @@ }, "uuid": "f54bb5bd-57bd-49d9-872a-524d440809e0" }, - "2878": { + "2879": { "varname": "php_fpm_logfile_icinga_service_name", "caption": "PHP-FPM Logfile: Icinga Service Name", "description": "Unique name of the service running this check, as the monitoring server knows it. Take it from the `__name` service attribute. Example: `monitoring-server!my-service-name`.", @@ -30046,7 +30057,7 @@ }, "uuid": "2af9743d-3ad3-4f4e-aee3-c3e994a3c2e6" }, - "2879": { + "2880": { "varname": "php_fpm_logfile_icinga_url", "caption": "PHP-FPM Logfile: Icinga URL", "description": "Monitoring server API URL. Example: `https://monitoring.example.com:5665`.", @@ -30057,7 +30068,7 @@ }, "uuid": "c6132a27-c052-4cbc-9bba-204cd9a56815" }, - "2880": { + "2881": { "varname": "php_fpm_logfile_icinga_username", "caption": "PHP-FPM Logfile: Icinga Username", "description": "Monitoring server API username.", @@ -30068,7 +30079,7 @@ }, "uuid": "257dac9d-7375-4fcf-b281-90009ed24eda" }, - "2881": { + "2882": { "varname": "php_fpm_logfile_ignore", "caption": "PHP-FPM Logfile: Ignore", "description": "Ignore a log line matching this Python regular expression. The log line is lowercased before matching, so write the pattern in lowercase (or use the `(?i)` flag). Can be specified multiple times. Example: `--ignore='(?i)linuxfabrik'`.", @@ -30079,7 +30090,7 @@ }, "uuid": "852f3fa7-35ea-4cff-b733-f7653a21804a" }, - "2882": { + "2883": { "varname": "php_fpm_logfile_insecure", "caption": "PHP-FPM Logfile: Insecure?", "description": "Applies to the connection to the monitoring server that `--icinga-callback` makes, which is the only network connection this check opens. This option explicitly allows insecure SSL connections.", @@ -30088,7 +30099,7 @@ "settings": {}, "uuid": "3fb00ec2-cccd-4861-a6ec-a387b2610222" }, - "2883": { + "2884": { "varname": "php_fpm_logfile_lookback", "caption": "PHP-FPM Logfile: Lookback", "description": "Request timeouts, slow requests and spawn pressure are counted within this window rather than reported one by one. Time window in seconds to look back over, ending at the moment of the run. Only what falls within it is counted, so what is reported is how often something happened lately rather than a total that keeps growing for as long as the source is kept. Example: `--lookback=3600`.", @@ -30099,7 +30110,7 @@ }, "uuid": "a2f18994-f646-49fa-b70b-6384491fb069" }, - "2884": { + "2885": { "varname": "php_fpm_logfile_match", "caption": "PHP-FPM Logfile: Match", "description": "Only consider a log line matching this Python regular expression. The log line is lowercased before matching, so write the pattern in lowercase (or use the `(?i)` flag). Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Example: `--match='\\[pool www\\]'`.", @@ -30110,7 +30121,7 @@ }, "uuid": "669df737-c49f-47a1-9a31-1050d1eac8e6" }, - "2885": { + "2886": { "varname": "php_fpm_logfile_no_insecure", "caption": "PHP-FPM Logfile: No Insecure?", "description": "Applies to the connection to the monitoring server that `--icinga-callback` makes, which is the only network connection this check opens. Verify the TLS certificate against the system trust store, overriding the insecure default of this check. Use it once the endpoint presents a publicly trusted certificate, or once its CA has been added to the system trust store.", @@ -30119,7 +30130,7 @@ "settings": {}, "uuid": "5e2c3abc-120b-409a-9952-e031345721b2" }, - "2886": { + "2887": { "varname": "php_fpm_logfile_no_match_severity", "caption": "PHP-FPM Logfile: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -30132,7 +30143,7 @@ }, "uuid": "cfd11895-68fb-4f1f-85ba-186115c62fdb" }, - "2887": { + "2888": { "varname": "php_fpm_logfile_no_perfdata", "caption": "PHP-FPM Logfile: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -30141,7 +30152,7 @@ "settings": {}, "uuid": "6d4cfd28-89fc-4cb8-85d3-57156201c84f" }, - "2888": { + "2889": { "varname": "php_fpm_logfile_no_proxy", "caption": "PHP-FPM Logfile: No Proxy?", "description": "Applies to the connection to the monitoring server that `--icinga-callback` makes, which is the only network connection this check opens. Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -30150,7 +30161,7 @@ "settings": {}, "uuid": "0a201557-781e-42f0-8809-415d074d10ba" }, - "2889": { + "2890": { "varname": "php_fpm_logfile_proxy", "caption": "PHP-FPM Logfile: Proxy", "description": "Applies to the connection to the monitoring server that `--icinga-callback` makes, which is the only network connection this check opens. Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -30161,7 +30172,7 @@ }, "uuid": "bbf103ec-87ac-4af6-8031-58b4dba5fbf2" }, - "2890": { + "2891": { "varname": "php_fpm_logfile_request_timeouts_critical", "caption": "PHP-FPM Logfile: Request Timeouts Critical", "description": "Number of terminated requests within `--lookback` that returns CRITICAL. 0 turns the threshold off. Example: `--request-timeouts-critical=20`.", @@ -30172,7 +30183,7 @@ }, "uuid": "b1f6a8ad-a732-4381-816e-580df256aeca" }, - "2891": { + "2892": { "varname": "php_fpm_logfile_request_timeouts_warning", "caption": "PHP-FPM Logfile: Request Timeouts Warning", "description": "Number of terminated requests within `--lookback` that returns WARNING. 0 turns the threshold off. Example: `--request-timeouts-warning=1`.", @@ -30183,7 +30194,7 @@ }, "uuid": "fdf1110d-3b6b-4cc1-a038-4c807f545b31" }, - "2892": { + "2893": { "varname": "php_fpm_logfile_server_log", "caption": "PHP-FPM Logfile: Server Log", "description": "Log source to read from. Accepts a file path, `docker:CONTAINER`, `podman:CONTAINER`, `kubectl:CONTAINER` or `systemd:UNITNAME`. Can be specified multiple times, and everything named is then read as one window; a source named twice is read once. If omitted, the check reads the `error_log` directive of the PHP-FPM configuration, falls back to the common locations of the distributions, and reads the journal of the PHP-FPM unit along with it; what the two share is counted once. It also reads the `error_log` file every pool names for the messages of PHP itself. Example: `--server-log=systemd:php-fpm.service`.", @@ -30194,7 +30205,7 @@ }, "uuid": "99493e9f-8b56-4f77-9a04-b2c5960bd44f" }, - "2893": { + "2894": { "varname": "php_fpm_logfile_slow_requests_critical", "caption": "PHP-FPM Logfile: Slow Requests Critical", "description": "Number of slow requests within `--lookback` that returns CRITICAL. 0 turns the threshold off. Example: `--slow-requests-critical=100`.", @@ -30205,7 +30216,7 @@ }, "uuid": "895a9515-c5c2-4a64-8770-69ea20e861e6" }, - "2894": { + "2895": { "varname": "php_fpm_logfile_slow_requests_warning", "caption": "PHP-FPM Logfile: Slow Requests Warning", "description": "Number of slow requests within `--lookback` that returns WARNING. 0 turns the threshold off. Example: `--slow-requests-warning=5`.", @@ -30216,7 +30227,7 @@ }, "uuid": "295485ef-a5dc-439d-826a-90870c02ec99" }, - "2895": { + "2896": { "varname": "php_fpm_logfile_spawn_pressure_critical", "caption": "PHP-FPM Logfile: Spawn Pressure Critical", "description": "Number of spawn pressure warnings within `--lookback` that returns CRITICAL. 0 turns the threshold off. Example: `--spawn-pressure-critical=50`.", @@ -30227,7 +30238,7 @@ }, "uuid": "fce1c352-33a2-4048-a9f9-8ec8029b1952" }, - "2896": { + "2897": { "varname": "php_fpm_logfile_spawn_pressure_warning", "caption": "PHP-FPM Logfile: Spawn Pressure Warning", "description": "Number of spawn pressure warnings within `--lookback` that returns WARNING. A pool logs one of these per second while it is spawning in bursts, so this counts how many arrived rather than that any did. 0 turns the threshold off. Example: `--spawn-pressure-warning=30`.", @@ -30238,7 +30249,7 @@ }, "uuid": "768137a7-a524-41ea-93e6-2ccf613d8981" }, - "2897": { + "2898": { "varname": "php_fpm_logfile_timeout", "caption": "PHP-FPM Logfile: Timeout", "description": "Network timeout in seconds.", @@ -30249,7 +30260,7 @@ }, "uuid": "a063d9e3-f5fc-4cce-a89b-e581151eb97e" }, - "2898": { + "2899": { "varname": "php_fpm_logfile_warning_level", "caption": "PHP-FPM Logfile: Warning Level", "description": "Least severe PHP-FPM log level that returns WARNING. Each level includes everything more severe than itself, and a level that `--critical-level` already covers returns CRITICAL instead. Case-sensitive. `none` lets no level return WARNING, which leaves the events this check names as the only way to reach it. Example: `--warning-level=none`.", @@ -30262,7 +30273,7 @@ }, "uuid": "b4ddd585-115a-4bb7-a613-8ad7055685f2" }, - "2899": { + "2900": { "varname": "php_fpm_ping_always_ok", "caption": "PHP-FPM Ping: Always OK?", "description": "Always returns OK.", @@ -30271,7 +30282,7 @@ "settings": {}, "uuid": "4eb61e4d-bce7-4b95-bda5-86aac59cf53c" }, - "2900": { + "2901": { "varname": "php_fpm_ping_insecure", "caption": "PHP-FPM Ping: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -30280,7 +30291,7 @@ "settings": {}, "uuid": "9a40b467-eca0-4360-8df4-90da80fbe83d" }, - "2901": { + "2902": { "varname": "php_fpm_ping_no_perfdata", "caption": "PHP-FPM Ping: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -30289,7 +30300,7 @@ "settings": {}, "uuid": "66f6b073-d0fa-4dce-b9f0-c22d9a626859" }, - "2902": { + "2903": { "varname": "php_fpm_ping_no_proxy", "caption": "PHP-FPM Ping: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -30298,7 +30309,7 @@ "settings": {}, "uuid": "103b5574-ce76-40c7-8dfa-f6c50cf3cd44" }, - "2903": { + "2904": { "varname": "php_fpm_ping_proxy", "caption": "PHP-FPM Ping: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -30309,7 +30320,7 @@ }, "uuid": "2911a921-c0e8-44f2-96b5-d00f99cc23de" }, - "2904": { + "2905": { "varname": "php_fpm_ping_response", "caption": "PHP-FPM Ping: Response", "description": "Expected PHP-FPM ping response string.", @@ -30320,7 +30331,7 @@ }, "uuid": "3e752354-5f37-478b-a59f-68fb911a3886" }, - "2905": { + "2906": { "varname": "php_fpm_ping_severity", "caption": "PHP-FPM Ping: Severity", "description": "Severity for alerting.", @@ -30333,7 +30344,7 @@ }, "uuid": "58f1d2f7-a0b9-4e34-960f-b6ed3572d988" }, - "2906": { + "2907": { "varname": "php_fpm_ping_timeout", "caption": "PHP-FPM Ping: Timeout", "description": "Network timeout in seconds.", @@ -30344,7 +30355,7 @@ }, "uuid": "10779f26-9d45-4c1a-a266-27e6b131ed35" }, - "2907": { + "2908": { "varname": "php_fpm_ping_url", "caption": "PHP-FPM Ping: URL", "description": "PHP-FPM ping URL.", @@ -30355,7 +30366,7 @@ }, "uuid": "fd7bceee-f899-4584-9909-01dc9242969a" }, - "2908": { + "2909": { "varname": "php_fpm_status_always_ok", "caption": "PHP-FPM Status: Always OK?", "description": "Always returns OK.", @@ -30364,7 +30375,7 @@ "settings": {}, "uuid": "01b705c9-7450-4f79-a5f7-3ba0196c6bd1" }, - "2909": { + "2910": { "varname": "php_fpm_status_critical", "caption": "PHP-FPM Status: Critical", "description": "CRIT threshold for pool saturation (active processes / total processes), in percent. Applies to static pools only - on dynamic and ondemand pools, `total processes` is the live worker count, so 100% is a transient state and the plugin uses `listen queue > 0` as the saturation signal instead.", @@ -30375,7 +30386,7 @@ }, "uuid": "6b8f771a-894f-4279-998e-c01334e2953e" }, - "2910": { + "2911": { "varname": "php_fpm_status_critical_slowreq", "caption": "PHP-FPM Status: Critical SlowReq", "description": "CRIT threshold for the number of NEW slow requests seen since the previous check run.", @@ -30386,7 +30397,7 @@ }, "uuid": "dc2dd1c4-2128-4f8f-827f-35ab0e30f503" }, - "2911": { + "2912": { "varname": "php_fpm_status_insecure", "caption": "PHP-FPM Status: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -30395,7 +30406,7 @@ "settings": {}, "uuid": "eeac9421-bebc-411c-b1d0-fabc1f193d4c" }, - "2912": { + "2913": { "varname": "php_fpm_status_lengthy", "caption": "PHP-FPM Status: Lengthy?", "description": "Extended reporting.", @@ -30404,7 +30415,7 @@ "settings": {}, "uuid": "12bbadd2-a970-41e7-a6d6-9cfd70afa63e" }, - "2913": { + "2914": { "varname": "php_fpm_status_no_perfdata", "caption": "PHP-FPM Status: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -30413,7 +30424,7 @@ "settings": {}, "uuid": "c54e63fa-42c1-4cb9-9701-538ac7c548f3" }, - "2914": { + "2915": { "varname": "php_fpm_status_no_proxy", "caption": "PHP-FPM Status: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -30422,7 +30433,7 @@ "settings": {}, "uuid": "08da853d-60f1-4210-831c-5a4bcdab4441" }, - "2915": { + "2916": { "varname": "php_fpm_status_proxy", "caption": "PHP-FPM Status: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -30433,7 +30444,7 @@ }, "uuid": "da71aea9-4459-4a6a-99d1-d97952156979" }, - "2916": { + "2917": { "varname": "php_fpm_status_severity", "caption": "PHP-FPM Status: Severity", "description": "Severity for alerting. Applied to pools that are unreachable or whose status JSON cannot be parsed. Saturation and slow-request thresholds are unaffected.", @@ -30446,7 +30457,7 @@ }, "uuid": "f8ed8237-b7e0-4802-ac0e-ee05c52babbc" }, - "2917": { + "2918": { "varname": "php_fpm_status_timeout", "caption": "PHP-FPM Status: Timeout", "description": "Network timeout in seconds.", @@ -30457,7 +30468,7 @@ }, "uuid": "0facfbb8-835e-4490-877a-d8b89f639a8e" }, - "2918": { + "2919": { "varname": "php_fpm_status_url", "caption": "PHP-FPM Status: URL", "description": "PHP-FPM status page URL. Can be specified multiple times to check several pools on the same host; each URL is treated as an independent pool. Basic authentication may be embedded in the URL as `http://user:password@host/pool-status`; the credentials are stripped from the request URL and sent via the `Authorization` header. Default: http://localhost/fpm-status", @@ -30468,7 +30479,7 @@ }, "uuid": "0922b18b-1da9-426f-95dd-3ba879acd78b" }, - "2919": { + "2920": { "varname": "php_fpm_status_warning", "caption": "PHP-FPM Status: Warning", "description": "WARN threshold for pool saturation (active processes / total processes), in percent. Applies to static pools only - on dynamic and ondemand pools, `total processes` is the live worker count, so 100% is a transient state and the plugin uses `listen queue > 0` as the saturation signal instead.", @@ -30479,7 +30490,7 @@ }, "uuid": "392b0d19-572e-4c6b-90c1-23c2b741f846" }, - "2920": { + "2921": { "varname": "php_fpm_status_warning_slowreq", "caption": "PHP-FPM Status: Warning SlowReq", "description": "WARN threshold for the number of NEW slow requests seen since the previous check run.", @@ -30490,7 +30501,7 @@ }, "uuid": "768af837-1cd9-4136-a9a0-5dd7badd0c37" }, - "2921": { + "2922": { "varname": "php_status_always_ok", "caption": "PHP Status: Always OK?", "description": "Always returns OK.", @@ -30499,7 +30510,7 @@ "settings": {}, "uuid": "9a4136bf-be36-4afa-8078-c208ecac22a0" }, - "2922": { + "2923": { "varname": "php_status_config", "caption": "PHP Status: Config", "description": "PHP ini \"key=value\" pair to check. The whole value is compared, case-insensitive. Can be specified multiple times. Example: `--config=memory_limit=128M`. Without it, only an unset `date.timezone` is reported.", @@ -30510,7 +30521,7 @@ }, "uuid": "d11ee44d-c53d-43e5-9b33-43fba40637b3" }, - "2923": { + "2924": { "varname": "php_status_critical", "caption": "PHP Status: Critical", "description": "CRIT threshold for OPcache memory and key usage, in percent.", @@ -30521,7 +30532,7 @@ }, "uuid": "162e21e0-3704-4892-bef6-6c4ffac9edbc" }, - "2924": { + "2925": { "varname": "php_status_dev", "caption": "PHP Status: Dev?", "description": "Development mode. Tolerates `display_errors=On` and `display_startup_errors=On`.", @@ -30530,7 +30541,7 @@ "settings": {}, "uuid": "61f682f6-f855-4ec4-9a07-052c964c6f7f" }, - "2925": { + "2926": { "varname": "php_status_extend_module", "caption": "PHP Status: Extend Module", "description": "PHP module name to check, matched against the start of each module `php --modules` lists, appended to the default or the `--module` list. Case-insensitive. Can be specified multiple times. Example: `--extend-module=mbstring`.", @@ -30541,7 +30552,7 @@ }, "uuid": "6619ff9f-aa55-4d7b-93ce-b8deca28b2d6" }, - "2926": { + "2927": { "varname": "php_status_ignore_multiple_masters", "caption": "PHP Status: Ignore Multiple Masters?", "description": "Do not warn when more than one PHP-FPM master is running. Use this on hosts where you intentionally run several PHP-FPM services and monitor each one with its own check.", @@ -30550,7 +30561,7 @@ "settings": {}, "uuid": "77de0d8f-e005-4b87-aefe-d0a294bfd692" }, - "2927": { + "2928": { "varname": "php_status_insecure", "caption": "PHP Status: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -30559,7 +30570,7 @@ "settings": {}, "uuid": "f03ac94c-1259-4957-85fa-87d501eaf9f8" }, - "2928": { + "2929": { "varname": "php_status_module", "caption": "PHP Status: Module", "description": "PHP module name to check, matched against the start of each module `php --modules` lists. Replaces the default list, use `--extend-module` to append to it. Case-insensitive. Can be specified multiple times. Example: `--module=json --module=mbstring`. Default: calendar, Core, ctype, date, exif, fileinfo, filter, ftp, gettext, hash, iconv, json, libxml, openssl, pcntl, pcre, Phar, readline, Reflection, session, sockets, SPL, standard, tokenizer, xml, zlib.", @@ -30570,7 +30581,7 @@ }, "uuid": "0163dde8-1441-475e-8e3d-2041a7bc9509" }, - "2929": { + "2930": { "varname": "php_status_no_perfdata", "caption": "PHP Status: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -30579,7 +30590,7 @@ "settings": {}, "uuid": "49536afb-98ac-45ad-8bd1-ce1fd943c02b" }, - "2930": { + "2931": { "varname": "php_status_no_proxy", "caption": "PHP Status: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -30588,7 +30599,7 @@ "settings": {}, "uuid": "1cdf44d2-2b6b-434b-92d5-41bb2800dc19" }, - "2931": { + "2932": { "varname": "php_status_proxy", "caption": "PHP Status: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -30599,7 +30610,7 @@ }, "uuid": "581b8d69-f592-4b2c-8618-8816f512033b" }, - "2932": { + "2933": { "varname": "php_status_timeout", "caption": "PHP Status: Timeout", "description": "Network timeout in seconds.", @@ -30610,7 +30621,7 @@ }, "uuid": "a45b9da4-1508-46db-b844-7797bcbd97ef" }, - "2933": { + "2934": { "varname": "php_status_top", "caption": "PHP Status: Top", "description": "Number of largest OPcache scripts to list, sorted by memory consumption (descending). Use `--top=0` to disable.", @@ -30621,7 +30632,7 @@ }, "uuid": "97fb6bd7-1514-4d58-a3e9-1e7d7066f4ec" }, - "2934": { + "2935": { "varname": "php_status_url", "caption": "PHP Status: URL", "description": "URL to the optional PHP `monitoring.php` helper script. The helper runs in the context of the single PHP-FPM master that serves this URL and reports only that master's OPcache and php.ini settings. To check several PHP-FPM services on a host, deploy one monitoring.php per service and run this plugin once per URL. Without it the plugin still works, but with reduced accuracy.", @@ -30632,7 +30643,7 @@ }, "uuid": "b12706cc-8a72-48e5-a89d-5581ccd96c32" }, - "2935": { + "2936": { "varname": "php_status_warning", "caption": "PHP Status: Warning", "description": "WARN threshold for OPcache memory and key usage, in percent.", @@ -30643,7 +30654,7 @@ }, "uuid": "cb56684b-b3d9-47d6-bec7-09479a46bc48" }, - "2936": { + "2937": { "varname": "php_version_always_ok", "caption": "PHP Version: Always OK?", "description": "Always returns OK.", @@ -30652,7 +30663,7 @@ "settings": {}, "uuid": "25a76a1b-6f13-4713-9bf6-cf15f82e79ce" }, - "2937": { + "2938": { "varname": "php_version_check_major", "caption": "PHP Version: Check Major?", "description": "Alert when a new major release is available, even if the current version is not yet EOL. Example: running v26 (not yet EOL) and v27 is available.", @@ -30661,7 +30672,7 @@ "settings": {}, "uuid": "9c248669-f453-4aff-a2de-69ea24a3f726" }, - "2938": { + "2939": { "varname": "php_version_check_minor", "caption": "PHP Version: Check Minor?", "description": "Alert when a new major.minor release is available, even if the current version is not yet EOL. Example: running v26.2 (not yet EOL) and v26.3 is available.", @@ -30670,7 +30681,7 @@ "settings": {}, "uuid": "206ae6cf-fc2e-4b93-87cf-558645eb1924" }, - "2939": { + "2940": { "varname": "php_version_check_patch", "caption": "PHP Version: Check Patch?", "description": "Alert when a new major.minor.patch release is available, even if the current version is not yet EOL. Example: running v26.2.7 (not yet EOL) and v26.2.8 is available.", @@ -30679,7 +30690,7 @@ "settings": {}, "uuid": "4564ea54-4c8a-476d-a164-df39ed2de3ac" }, - "2940": { + "2941": { "varname": "php_version_insecure", "caption": "PHP Version: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -30688,7 +30699,7 @@ "settings": {}, "uuid": "c97490c2-ad18-43df-8137-7e0507eb2b6a" }, - "2941": { + "2942": { "varname": "php_version_no_perfdata", "caption": "PHP Version: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -30697,7 +30708,7 @@ "settings": {}, "uuid": "bc09d644-eb7e-4170-949d-77d72331cac9" }, - "2942": { + "2943": { "varname": "php_version_no_proxy", "caption": "PHP Version: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -30706,7 +30717,7 @@ "settings": {}, "uuid": "0df69da9-2939-424a-8a20-4a486b248c02" }, - "2943": { + "2944": { "varname": "php_version_offset_eol", "caption": "PHP Version: Offset Eol", "description": "Alert n days before (\"-30\") or after an EOL date (\"30\" or \"+30\").", @@ -30717,7 +30728,7 @@ }, "uuid": "c7626574-2e48-48bf-9dd6-21859affdbca" }, - "2944": { + "2945": { "varname": "php_version_path", "caption": "PHP Version: Path", "description": "Local path to your PHP binary.", @@ -30728,7 +30739,7 @@ }, "uuid": "943bc02d-85f3-48b1-85b9-a823947c94b8" }, - "2945": { + "2946": { "varname": "php_version_proxy", "caption": "PHP Version: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -30739,7 +30750,7 @@ }, "uuid": "331fca69-2eb1-4275-b892-f82d1f03bacb" }, - "2946": { + "2947": { "varname": "php_version_timeout", "caption": "PHP Version: Timeout", "description": "Network timeout in seconds.", @@ -30750,7 +30761,7 @@ }, "uuid": "d6278d08-80c2-4748-b617-6a46ca52d3aa" }, - "2947": { + "2948": { "varname": "php_version_unreachable_severity", "caption": "PHP Version: Unreachable Severity", "description": "State to report when the online source is unreachable. What is used instead - bundled offline data, a cached copy, or nothing at all - is named in the output, and a clean result then only covers what that fallback could confirm.", @@ -30763,7 +30774,7 @@ }, "uuid": "5e2d149e-29c0-48c3-b91d-afccc47e58b5" }, - "2948": { + "2949": { "varname": "ping_always_ok", "caption": "Ping: Always OK?", "description": "Always returns OK.", @@ -30772,7 +30783,7 @@ "settings": {}, "uuid": "8b73ad73-f1f2-4ee6-b075-48134f0e63f0" }, - "2949": { + "2950": { "varname": "ping_count", "caption": "Ping: Count", "description": "Number of ECHO_REQUEST packets to send.", @@ -30783,7 +30794,7 @@ }, "uuid": "d1be5af4-f89a-4dcf-80e2-ac1508fd4ad8" }, - "2950": { + "2951": { "varname": "ping_hostname", "caption": "Ping: Hostname", "description": "Hostname or IP address to ping.", @@ -30794,7 +30805,7 @@ }, "uuid": "fcd9fdac-8264-403b-b4a1-699dcdd70e61" }, - "2951": { + "2952": { "varname": "ping_interface", "caption": "Ping: Interface", "description": "Interface name or source address to ping from (`ping -I`). Example: `--interface eth0`.", @@ -30805,7 +30816,7 @@ }, "uuid": "d9122429-0626-4cee-bfaf-30f29a5f8a06" }, - "2952": { + "2953": { "varname": "ping_interval", "caption": "Ping: Interval", "description": "Interval between sending each packet, in seconds. Accepts real numbers with dot as decimal separator (regardless of locale).", @@ -30816,7 +30827,7 @@ }, "uuid": "c8d8ef18-d76f-4037-acd9-6ce28368c01c" }, - "2953": { + "2954": { "varname": "ping_ipv4", "caption": "Ping: IPv4?", "description": "Force IPv4.", @@ -30825,7 +30836,7 @@ "settings": {}, "uuid": "546d4a49-98aa-417e-a403-cab298d2d3d5" }, - "2954": { + "2955": { "varname": "ping_ipv6", "caption": "Ping: IPv6?", "description": "Use IPv6.", @@ -30834,7 +30845,7 @@ "settings": {}, "uuid": "4b04dc81-4c24-41d9-94b0-002b7a157bc4" }, - "2955": { + "2956": { "varname": "ping_no_perfdata", "caption": "Ping: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -30843,7 +30854,7 @@ "settings": {}, "uuid": "a128f20b-e3ee-4c3b-ad8f-08b183bf8c66" }, - "2956": { + "2957": { "varname": "ping_packet_loss_critical", "caption": "Ping: Packet Loss Critical", "description": "CRIT threshold for the packet loss, in percent. Supports Nagios ranges. Disabled by default.", @@ -30854,7 +30865,7 @@ }, "uuid": "b8ef29ea-3725-45c1-b1a9-4615e9df7430" }, - "2957": { + "2958": { "varname": "ping_packet_loss_warning", "caption": "Ping: Packet Loss Warning", "description": "WARN threshold for the packet loss, in percent. Supports Nagios ranges. Disabled by default.", @@ -30865,7 +30876,7 @@ }, "uuid": "69ddc309-c622-4ff4-b819-570f6844a775" }, - "2958": { + "2959": { "varname": "ping_packet_size", "caption": "Ping: Packet Size", "description": "Number of data bytes to send (`ping -s`), excluding the 8-byte ICMP header. Example: `--packet-size 1472`.", @@ -30876,7 +30887,7 @@ }, "uuid": "6ac46524-c1fe-4c33-ae5b-863f6f80eaaa" }, - "2959": { + "2960": { "varname": "ping_rta_critical", "caption": "Ping: Rta Critical", "description": "CRIT threshold for the round-trip average, in milliseconds. Supports Nagios ranges. Disabled by default.", @@ -30887,7 +30898,7 @@ }, "uuid": "0563f9d6-4f15-43c5-82df-25b3c00111fd" }, - "2960": { + "2961": { "varname": "ping_rta_warning", "caption": "Ping: Rta Warning", "description": "WARN threshold for the round-trip average, in milliseconds. Supports Nagios ranges. Disabled by default.", @@ -30898,7 +30909,7 @@ }, "uuid": "f70fc578-aa79-4cb6-a1ed-07238c6aa5c9" }, - "2961": { + "2962": { "varname": "ping_rtt_mdev_critical", "caption": "Ping: Rtt Mdev Critical", "description": "CRIT threshold for the round-trip variability (mdev, a jitter measure), in milliseconds. Supports Nagios ranges. Disabled by default.", @@ -30909,7 +30920,7 @@ }, "uuid": "63baa8c4-361f-4f1f-a773-589be45bad0f" }, - "2962": { + "2963": { "varname": "ping_rtt_mdev_warning", "caption": "Ping: Rtt Mdev Warning", "description": "WARN threshold for the round-trip variability (mdev, a jitter measure), in milliseconds. Supports Nagios ranges. Disabled by default.", @@ -30920,7 +30931,7 @@ }, "uuid": "4b70f67e-5d5d-4fee-956c-cbadb34a7fe1" }, - "2963": { + "2964": { "varname": "ping_timeout", "caption": "Ping: Timeout", "description": "Timeout in seconds before ping exits regardless of how many packets have been sent or received.", @@ -30931,7 +30942,7 @@ }, "uuid": "7a98988f-14de-4d75-a837-514548accc6d" }, - "2964": { + "2965": { "varname": "ping_ttl", "caption": "Ping: Ttl", "description": "IP Time To Live for the outgoing packets (`ping -t`). Example: `--ttl 64`.", @@ -30942,7 +30953,7 @@ }, "uuid": "8ee4709c-849a-451b-83cb-465c2c9b92f6" }, - "2965": { + "2966": { "varname": "pip_updates_always_ok", "caption": "pip Updates: Always OK?", "description": "Always returns OK.", @@ -30951,7 +30962,7 @@ "settings": {}, "uuid": "4e71c4cf-6e0f-478f-bc55-b6cc4e5f1689" }, - "2966": { + "2967": { "varname": "pip_updates_critical", "caption": "pip Updates: Critical", "description": "CRIT threshold for the number of outdated packages.", @@ -30962,7 +30973,7 @@ }, "uuid": "54bf439f-909a-4fa9-adda-98e3924e8f01" }, - "2967": { + "2968": { "varname": "pip_updates_exclude", "caption": "pip Updates: Exclude", "description": "Package name to exclude from the output. Can be specified multiple times.", @@ -30973,7 +30984,7 @@ }, "uuid": "b3148062-c0ea-4396-b1f3-e0f08456a250" }, - "2968": { + "2969": { "varname": "pip_updates_extra_index_url", "caption": "pip Updates: Extra Index URL", "description": "Extra URL of a package index to use in addition to --index-url. Should follow the same rules as --index-url. Can be specified multiple times.", @@ -30984,7 +30995,7 @@ }, "uuid": "8a5f617b-9d57-49f0-975d-a592572d757f" }, - "2969": { + "2970": { "varname": "pip_updates_find_links", "caption": "pip Updates: Find Links", "description": "URL or path to an HTML file to parse for links to archives (.tar.gz, .whl). If a local path or file:// URL pointing to a directory, look for archives in the directory listing. VCS project URLs are not supported. Can be specified multiple times.", @@ -30995,7 +31006,7 @@ }, "uuid": "24148ce3-31bb-4e36-9aba-da408a396579" }, - "2970": { + "2971": { "varname": "pip_updates_index_url", "caption": "pip Updates: Index URL", "description": "Base URL of the Python Package Index (PEP 503 compliant repository or local directory in the same format).", @@ -31006,7 +31017,7 @@ }, "uuid": "fe8d9248-b929-4b1d-9df7-c8b3b575b950" }, - "2971": { + "2972": { "varname": "pip_updates_local", "caption": "pip Updates: Local?", "description": "If in a virtualenv that has global access, do not list globally-installed packages.", @@ -31015,7 +31026,7 @@ "settings": {}, "uuid": "dc6430b6-c535-473d-a292-5069ce5f4be9" }, - "2972": { + "2973": { "varname": "pip_updates_no_index", "caption": "pip Updates: No Index?", "description": "Ignore the package index and only look at --find-links URLs.", @@ -31024,7 +31035,7 @@ "settings": {}, "uuid": "41bb4196-0c2a-4652-a245-9e36c21a8c33" }, - "2973": { + "2974": { "varname": "pip_updates_no_perfdata", "caption": "pip Updates: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -31033,7 +31044,7 @@ "settings": {}, "uuid": "73ce2e7b-86b5-4a4f-9763-671e39b62574" }, - "2974": { + "2975": { "varname": "pip_updates_not_required", "caption": "pip Updates: Not Required?", "description": "Only list packages that are not dependencies of other installed packages.", @@ -31042,7 +31053,7 @@ "settings": {}, "uuid": "3cfd5e50-6f3a-4a73-b25e-cb91a9f56fb2" }, - "2975": { + "2976": { "varname": "pip_updates_pre", "caption": "pip Updates: Pre?", "description": "Include pre-release and development versions. By default, pip only finds stable versions.", @@ -31051,7 +31062,7 @@ "settings": {}, "uuid": "0f50b608-ba12-40b7-a195-97451ad936de" }, - "2976": { + "2977": { "varname": "pip_updates_timeout", "caption": "pip Updates: Timeout", "description": "Network timeout in seconds.", @@ -31062,7 +31073,7 @@ }, "uuid": "1def7577-a0a8-4b56-879f-f87d571625dd" }, - "2977": { + "2978": { "varname": "pip_updates_user", "caption": "pip Updates: User?", "description": "Only check packages installed in the user-site directory.", @@ -31071,7 +31082,7 @@ "settings": {}, "uuid": "d7a1e082-3a23-4364-9782-1820cc916884" }, - "2978": { + "2979": { "varname": "pip_updates_virtualenv", "caption": "pip Updates: Virtualenv", "description": "Path to the activate script of a virtualenv. The interpreter of that virtualenv is used to check for updates inside it. Example: `--virtualenv=/opt/sphinx-venv/bin/activate`.", @@ -31082,7 +31093,7 @@ }, "uuid": "8aa7a83e-68fe-40cb-a3e7-1fa9d6e2837b" }, - "2979": { + "2980": { "varname": "pip_updates_warning", "caption": "pip Updates: Warning", "description": "WARN threshold for the number of outdated packages.", @@ -31093,7 +31104,7 @@ }, "uuid": "596913b8-7ab4-4d04-8b5e-3ac512fe7daa" }, - "2980": { + "2981": { "varname": "podman_container_always_ok", "caption": "Podman Container: Always OK?", "description": "Always returns OK.", @@ -31102,7 +31113,7 @@ "settings": {}, "uuid": "585c4020-af62-481f-a815-cb1f341e9803" }, - "2981": { + "2982": { "varname": "podman_container_critical_restarts", "caption": "Podman Container: Critical Restarts", "description": "CRIT threshold for the number of automatic restarts a container has performed, compared as a Nagios range. Example: `--critical-restarts=5` alerts when a container has restarted more than 5 times. By default, the restart count is reported but not alerted on.", @@ -31113,7 +31124,7 @@ }, "uuid": "cd4dc8e4-5297-4fa6-afe7-e04ece9d2919" }, - "2982": { + "2983": { "varname": "podman_container_critical_uptime", "caption": "Podman Container: Critical Uptime", "description": "CRIT threshold for the container uptime in a human-readable format (s = seconds, m = minutes, h = hours, D = days, W = weeks, M = months, Y = years). Supports Nagios ranges. Example: `5m:` alerts if a running container has been up for less than 5 minutes (catches a crash-looping or flapping container). By default, the uptime is reported but not alerted on.", @@ -31124,7 +31135,7 @@ }, "uuid": "5989dfe2-fe2b-48d7-babc-11256ff732be" }, - "2983": { + "2984": { "varname": "podman_container_full_name", "caption": "Podman Container: Full Name?", "description": "Use the full container name, for example `traefik_traefik.2.1idw12p2yqp`. Without this flag, the name is shortened after the replica number.", @@ -31133,7 +31144,7 @@ "settings": {}, "uuid": "789786ef-8276-41f0-af28-8c73d90a977c" }, - "2984": { + "2985": { "varname": "podman_container_ignore", "caption": "Podman Container: Ignore", "description": "Ignore containers whose name matches this Python regular expression. Matched against the full container name, even when the displayed name is shortened (see --full-name). Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. Example: `--ignore=\"^k8s_\"` to skip Kubernetes pod infrastructure containers. Example: `--ignore=\"(?i)test\"` (case-insensitive) to skip any container with \"test\" in its name.", @@ -31144,7 +31155,7 @@ }, "uuid": "aba7dbd2-f624-479e-aa44-2d13de7c447e" }, - "2985": { + "2986": { "varname": "podman_container_match", "caption": "Podman Container: Match", "description": "Only check containers whose name matches this Python regular expression. Matched against the full container name, even when the displayed name is shortened (see --full-name). Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Example: `--match=\"^traefik$\"` to pin a service to one specific container. Example: `--match=\"(?i)^web\"` (case-insensitive) to check every web container.", @@ -31155,7 +31166,7 @@ }, "uuid": "f0c02ee8-3ca0-4500-b338-07d052b117b3" }, - "2986": { + "2987": { "varname": "podman_container_no_match_severity", "caption": "Podman Container: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -31168,7 +31179,7 @@ }, "uuid": "b1e47def-fc3d-4f8a-8f04-3cca130bafaf" }, - "2987": { + "2988": { "varname": "podman_container_no_perfdata", "caption": "Podman Container: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -31177,7 +31188,7 @@ "settings": {}, "uuid": "2233b776-6106-4a15-a137-0c695c05439e" }, - "2988": { + "2989": { "varname": "podman_container_status", "caption": "Podman Container: Status", "description": "Desired container status. Podman reports one of `created`, `initialized`, `running`, `paused`, `stopping`, `stopped`, `exited`, `removing` and `unknown`. A container whose status differs is reported as CRITICAL. If not specified, the status is reported but not alerted on.", @@ -31188,7 +31199,7 @@ }, "uuid": "dc81e9be-035d-47e8-b17c-da1eaa2e23d5" }, - "2989": { + "2990": { "varname": "podman_container_timeout", "caption": "Podman Container: Timeout", "description": "Network timeout in seconds.", @@ -31199,7 +31210,7 @@ }, "uuid": "b12dbde8-4eaa-47f7-8bfb-017b1b2df670" }, - "2990": { + "2991": { "varname": "podman_container_user", "caption": "Podman Container: User", "description": "Inspect the rootless containers of this user instead of those visible to the executing user. Podman keeps each user's rootless containers in that user's own storage, so root (the monitoring user runs the check via sudo) does not see them. With --user, the check runs podman as that user. Requires the right to `sudo -u ` (root has this by default), and the user needs a subordinate UID range in /etc/subuid, as rootless Podman does. Example: `--user=rocketchat`.", @@ -31210,7 +31221,7 @@ }, "uuid": "96756a80-4f8e-4cff-9672-137faa70db7a" }, - "2991": { + "2992": { "varname": "podman_container_warning_restarts", "caption": "Podman Container: Warning Restarts", "description": "WARN threshold for the number of automatic restarts a container has performed, compared as a Nagios range. Example: `--warning-restarts=3` alerts when a container has restarted more than 3 times. By default, the restart count is reported but not alerted on.", @@ -31221,7 +31232,7 @@ }, "uuid": "b03e1cce-19dd-427e-95a1-a6293c964ee6" }, - "2992": { + "2993": { "varname": "podman_container_warning_uptime", "caption": "Podman Container: Warning Uptime", "description": "WARN threshold for the container uptime in a human-readable format (s = seconds, m = minutes, h = hours, D = days, W = weeks, M = months, Y = years). Supports Nagios ranges. Example: `5m:` alerts if a running container has been up for less than 5 minutes (catches a crash-looping or flapping container). By default, the uptime is reported but not alerted on.", @@ -31232,7 +31243,7 @@ }, "uuid": "779f5d7f-30da-41d2-9e9f-7bfee5816bbb" }, - "2993": { + "2994": { "varname": "podman_image_always_ok", "caption": "Podman Image: Always OK?", "description": "Always returns OK.", @@ -31241,7 +31252,7 @@ "settings": {}, "uuid": "20946820-3164-4a93-8bd5-a899f490034b" }, - "2994": { + "2995": { "varname": "podman_image_brief", "caption": "Podman Image: Brief?", "description": "Hide the rows that are within the thresholds and show only those in a WARN or CRIT state. Perfdata and alerting are unaffected: every item still emits performance data and still drives the overall check state, so this is safe to leave on.", @@ -31250,7 +31261,7 @@ "settings": {}, "uuid": "601c5f29-58e0-4b00-b473-46e26124efcb" }, - "2995": { + "2996": { "varname": "podman_image_critical", "caption": "Podman Image: Critical", "description": "CRIT threshold for the image age in a human-readable format (s = seconds, m = minutes, h = hours, D = days, W = weeks, M = months, Y = years). Supports Nagios ranges. Example: `180D` alerts on images older than 180 days.", @@ -31261,7 +31272,7 @@ }, "uuid": "b8348e50-0c39-41f8-b8ef-210a147a9fdf" }, - "2996": { + "2997": { "varname": "podman_image_ignore", "caption": "Podman Image: Ignore", "description": "Ignore images whose repository tag matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. Example: `--ignore=\"^localhost/\"` to skip locally built images. Example: `--ignore=\"(?i)test\"` (case-insensitive) to skip any image with \"test\" in its tag.", @@ -31272,7 +31283,7 @@ }, "uuid": "b2cd8faf-9156-48be-8817-b5bfe0d68813" }, - "2997": { + "2998": { "varname": "podman_image_match", "caption": "Podman Image: Match", "description": "Only check images whose repository tag matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Example: `--match=\"^docker.io/library/nginx\"` to check only the nginx images.", @@ -31283,7 +31294,7 @@ }, "uuid": "2d2792d5-9c4d-49f5-94cc-84cc0fb8474e" }, - "2998": { + "2999": { "varname": "podman_image_no_match_severity", "caption": "Podman Image: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -31296,7 +31307,7 @@ }, "uuid": "ad54edfd-1695-4ca5-ab99-cc23ccff35f6" }, - "2999": { + "3000": { "varname": "podman_image_no_perfdata", "caption": "Podman Image: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -31305,7 +31316,7 @@ "settings": {}, "uuid": "9b9e8dd5-d6a2-4353-b142-8deb4a1aba70" }, - "3000": { + "3001": { "varname": "podman_image_timeout", "caption": "Podman Image: Timeout", "description": "Network timeout in seconds.", @@ -31316,7 +31327,7 @@ }, "uuid": "a796e405-dfc3-4d65-b509-f47ff51e0858" }, - "3001": { + "3002": { "varname": "podman_image_user", "caption": "Podman Image: User", "description": "Inspect the rootless images of this user instead of those visible to the executing user. Podman keeps each user's rootless images in that user's own storage, so root (the monitoring user runs the check via sudo) does not see them. With --user, the check runs podman as that user. Requires the right to `sudo -u ` (root has this by default), and the user needs a subordinate UID range in /etc/subuid, as rootless Podman does. Example: `--user=webapp`.", @@ -31327,7 +31338,7 @@ }, "uuid": "131d5316-a224-4d3a-b918-802a6c6cfac9" }, - "3002": { + "3003": { "varname": "podman_image_warning", "caption": "Podman Image: Warning", "description": "WARN threshold for the image age in a human-readable format (s = seconds, m = minutes, h = hours, D = days, W = weeks, M = months, Y = years). Supports Nagios ranges. Example: `90D` alerts on images older than 90 days.", @@ -31338,7 +31349,7 @@ }, "uuid": "d9976853-63f6-4cec-b94b-7c2c38d56852" }, - "3003": { + "3004": { "varname": "podman_info_always_ok", "caption": "Podman Info: Always OK?", "description": "Always returns OK.", @@ -31347,7 +31358,7 @@ "settings": {}, "uuid": "bab2f8e7-6496-4b71-8f2c-06eb6840b6b0" }, - "3004": { + "3005": { "varname": "podman_info_ignore", "caption": "Podman Info: Ignore", "description": "Ignore stderr lines matching this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. Example: `--ignore=\"cgroup v1\"` to suppress a benign cgroup-version warning on hosts that have not yet migrated to cgroup v2. Example: `--ignore=\"(?i)rootless\"` (case-insensitive) to suppress any rootless-related informational warning.", @@ -31358,7 +31369,7 @@ }, "uuid": "96a363d6-0b4a-4fd0-b521-48310425c78e" }, - "3005": { + "3006": { "varname": "podman_info_no_perfdata", "caption": "Podman Info: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -31367,7 +31378,7 @@ "settings": {}, "uuid": "376e203a-c501-4b97-acbb-67055801cace" }, - "3006": { + "3007": { "varname": "podman_info_timeout", "caption": "Podman Info: Timeout", "description": "Network timeout in seconds.", @@ -31378,7 +31389,7 @@ }, "uuid": "7b140481-f97d-4744-9b7c-2a5f68af4d2c" }, - "3007": { + "3008": { "varname": "podman_info_user", "caption": "Podman Info: User", "description": "Report on the rootless Podman of this user instead of the one visible to the executing user. Podman keeps each user's rootless containers and images in that user's own storage, so root (the monitoring user runs the check via sudo) does not see them. With --user, the check runs podman as that user. Requires the right to `sudo -u ` (root has this by default), and the user needs a subordinate UID range in /etc/subuid, as rootless Podman does. Example: `--user=rocketchat`.", @@ -31389,7 +31400,7 @@ }, "uuid": "d8e7f642-c89c-42ff-a3dd-d17d8a4969fa" }, - "3008": { + "3009": { "varname": "podman_stats_always_ok", "caption": "Podman Stats: Always OK?", "description": "Always returns OK.", @@ -31398,7 +31409,7 @@ "settings": {}, "uuid": "a11ddf69-1c02-45ce-bbd9-a3e9e599abf8" }, - "3009": { + "3010": { "varname": "podman_stats_count", "caption": "Podman Stats: Count", "description": "Number of consecutive checks the threshold must be exceeded before alerting.", @@ -31409,7 +31420,7 @@ }, "uuid": "c9af25b4-b459-4c0f-9f59-24cb9d5fa8ad" }, - "3010": { + "3011": { "varname": "podman_stats_critical_cpu", "caption": "Podman Stats: Critical CPU", "description": "CRIT threshold for CPU usage, in percent. Supports Nagios ranges.", @@ -31420,7 +31431,7 @@ }, "uuid": "b2f9be2c-d37c-483b-8224-6b7d0442a129" }, - "3011": { + "3012": { "varname": "podman_stats_critical_mem", "caption": "Podman Stats: Critical Memory", "description": "CRIT threshold for memory usage, in percent. Supports Nagios ranges.", @@ -31431,7 +31442,7 @@ }, "uuid": "651e6359-6b8a-4622-861a-4276335c5705" }, - "3012": { + "3013": { "varname": "podman_stats_full_name", "caption": "Podman Stats: Full Name?", "description": "Use the full container name, for example `traefik_traefik.2.1idw12p2yqp`. Without this flag, the name is shortened after the replica number.", @@ -31440,7 +31451,7 @@ "settings": {}, "uuid": "ec607876-1052-41ca-b854-a170f10c81c3" }, - "3013": { + "3014": { "varname": "podman_stats_ignore", "caption": "Podman Stats: Ignore", "description": "Ignore containers whose name matches this Python regular expression. Matched against the full container name, even when the displayed name is shortened (see --full-name). Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. Example: `--ignore=\"^k8s_\"` to skip Kubernetes pod infrastructure containers. Example: `--ignore=\"(?i)test\"` (case-insensitive) to skip any container with \"test\" in its name.", @@ -31451,7 +31462,7 @@ }, "uuid": "7a0b1f16-d3e1-4841-b6cb-9f1398f59945" }, - "3014": { + "3015": { "varname": "podman_stats_match", "caption": "Podman Stats: Match", "description": "Only check containers whose name matches this Python regular expression. Matched against the full container name, even when the displayed name is shortened (see --full-name). Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Example: `--match=\"^traefik$\"` to pin the check to one specific container. Example: `--match=\"(?i)^web\"` (case-insensitive) to check every web container.", @@ -31462,7 +31473,7 @@ }, "uuid": "292f2a2d-ab4a-43e5-942e-1979f0138652" }, - "3015": { + "3016": { "varname": "podman_stats_no_match_severity", "caption": "Podman Stats: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -31475,7 +31486,7 @@ }, "uuid": "5b12f209-5e5e-43fe-857c-401389f8af88" }, - "3016": { + "3017": { "varname": "podman_stats_no_perfdata", "caption": "Podman Stats: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -31484,7 +31495,7 @@ "settings": {}, "uuid": "ac36433b-04d1-4bfb-b1fb-40b026f15359" }, - "3017": { + "3018": { "varname": "podman_stats_timeout", "caption": "Podman Stats: Timeout", "description": "Network timeout in seconds.", @@ -31495,7 +31506,7 @@ }, "uuid": "b073edc2-778c-48d5-9f6a-b790520b45e8" }, - "3018": { + "3019": { "varname": "podman_stats_user", "caption": "Podman Stats: User", "description": "Report on the rootless containers of this user instead of those visible to the executing user. Podman keeps each user's rootless containers in that user's own storage, so root (the monitoring user runs the check via sudo) does not see them. With --user, the check runs podman as that user. Requires the right to `sudo -u ` (root has this by default), and the user needs a subordinate UID range in /etc/subuid, as rootless Podman does. Example: `--user=rocketchat`.", @@ -31506,7 +31517,7 @@ }, "uuid": "46be914e-a6b2-49ab-b7bb-c0e34d0675ae" }, - "3019": { + "3020": { "varname": "podman_stats_warning_cpu", "caption": "Podman Stats: Warning CPU", "description": "WARN threshold for CPU usage, in percent. Supports Nagios ranges.", @@ -31517,7 +31528,7 @@ }, "uuid": "d2580263-e0b7-4637-87a6-32ea6976e2b9" }, - "3020": { + "3021": { "varname": "podman_stats_warning_mem", "caption": "Podman Stats: Warning Memory", "description": "WARN threshold for memory usage, in percent. Supports Nagios ranges.", @@ -31528,7 +31539,7 @@ }, "uuid": "69bdb916-c136-412b-9d21-b4d8a8b6f47c" }, - "3021": { + "3022": { "varname": "postfix_logfile_aborted_connections_critical", "caption": "Postfix Logfile: Aborted Connections Critical", "description": "Number of conversations that ended before a message was handed over within `--lookback` that returns CRITICAL. 0 turns the threshold off. Example: `--aborted-connections-critical=5000`.", @@ -31539,7 +31550,7 @@ }, "uuid": "3b9e7bcb-ce75-469f-b194-2700fce1e646" }, - "3022": { + "3023": { "varname": "postfix_logfile_aborted_connections_warning", "caption": "Postfix Logfile: Aborted Connections Warning", "description": "Number of conversations that ended before a message was handed over within `--lookback` that returns WARNING. Every server answering on port 25 collects these all day, so this is meant to catch a scan starting and not the background noise. 0 turns the threshold off. Example: `--aborted-connections-warning=500`.", @@ -31550,7 +31561,7 @@ }, "uuid": "2f6384c1-092b-4d7a-9926-3a7d47f75a96" }, - "3023": { + "3024": { "varname": "postfix_logfile_always_ok", "caption": "Postfix Logfile: Always OK?", "description": "Always returns OK.", @@ -31559,7 +31570,7 @@ "settings": {}, "uuid": "45523d0e-363f-42e8-9977-9e9ed8799b1d" }, - "3024": { + "3025": { "varname": "postfix_logfile_auth_failures_critical", "caption": "Postfix Logfile: Auth Failures Critical", "description": "Number of failed SMTP logins within `--lookback` that returns CRITICAL. 0 turns the threshold off. Example: `--auth-failures-critical=200`.", @@ -31570,7 +31581,7 @@ }, "uuid": "3d05d03c-7faf-4060-b03a-24e22fbac103" }, - "3025": { + "3026": { "varname": "postfix_logfile_auth_failures_warning", "caption": "Postfix Logfile: Auth Failures Warning", "description": "Number of failed SMTP logins within `--lookback` that returns WARNING. Counted per source address, so a run against one mailbox from one host reaches it while the same number of typos across a fleet does not. 0 turns the threshold off. Example: `--auth-failures-warning=5`.", @@ -31581,7 +31592,7 @@ }, "uuid": "010effb4-b602-45a1-ab72-7b295b5d4dba" }, - "3026": { + "3027": { "varname": "postfix_logfile_bounced_critical", "caption": "Postfix Logfile: Bounced Critical", "description": "Number of deliveries given up on within `--lookback` that returns CRITICAL. 0 turns the threshold off. Example: `--bounced-critical=500`.", @@ -31592,7 +31603,7 @@ }, "uuid": "69763c9f-862c-4ec4-bfe9-2c4e5931529a" }, - "3027": { + "3028": { "varname": "postfix_logfile_bounced_warning", "caption": "Postfix Logfile: Bounced Warning", "description": "Number of deliveries given up on within `--lookback` that returns WARNING. On a host that only sends its own mail, every one of them is a message nobody will read; a server receiving from the internet bounces all day and wants this raised. 0 turns the threshold off. Example: `--bounced-warning=1`.", @@ -31603,7 +31614,7 @@ }, "uuid": "4343a86a-7e5c-4249-a2bd-0454da5c4c9a" }, - "3028": { + "3029": { "varname": "postfix_logfile_critical_level", "caption": "Postfix Logfile: Critical Level", "description": "Least severe Postfix log level that returns CRITICAL. Each level includes everything more severe than itself, so `error` covers `fatal` and `panic` as well. Case-sensitive. `none` lets no level return CRITICAL, which leaves the events this check names as the only way to reach it. Example: `--critical-level=error`.", @@ -31616,7 +31627,7 @@ }, "uuid": "44d62534-f972-44cf-96de-57ec292f9b5e" }, - "3029": { + "3030": { "varname": "postfix_logfile_deferred_critical", "caption": "Postfix Logfile: Deferred Critical", "description": "Number of deliveries put back into the queue within `--lookback` that returns CRITICAL. 0 turns the threshold off. Example: `--deferred-critical=500`.", @@ -31627,7 +31638,7 @@ }, "uuid": "0b333d14-db99-494f-98af-4e59b98096b9" }, - "3030": { + "3031": { "varname": "postfix_logfile_deferred_warning", "caption": "Postfix Logfile: Deferred Warning", "description": "Number of deliveries put back into the queue within `--lookback` that returns WARNING. A single one is a mailbox that is full; a burst of them is the next hop being down. 0 turns the threshold off. Example: `--deferred-warning=5`.", @@ -31638,7 +31649,7 @@ }, "uuid": "d3eebb9f-a113-48e4-9bcb-c36fffcbba6a" }, - "3031": { + "3032": { "varname": "postfix_logfile_icinga_callback", "caption": "Postfix Logfile: Icinga Callback?", "description": "Ask the monitoring server whether the service running this check is acknowledged. Where it is, what this run reports is remembered as already handled, so it no longer raises an alert on the following runs. Requires `--icinga-url`, `--icinga-username`, `--icinga-password` and `--icinga-service-name`.", @@ -31647,7 +31658,7 @@ "settings": {}, "uuid": "8d9f0f15-f75b-49f0-b2ba-0c759e1af87b" }, - "3032": { + "3033": { "varname": "postfix_logfile_icinga_password", "caption": "Postfix Logfile: Icinga Password", "description": "Monitoring server API password.", @@ -31658,7 +31669,7 @@ }, "uuid": "c8b8a90b-e28c-4760-829f-8eef1e8530b1" }, - "3033": { + "3034": { "varname": "postfix_logfile_icinga_service_name", "caption": "Postfix Logfile: Icinga Service Name", "description": "Unique name of the service running this check, as the monitoring server knows it. Take it from the `__name` service attribute. Example: `monitoring-server!my-service-name`.", @@ -31669,7 +31680,7 @@ }, "uuid": "a21c349b-c507-47ed-b8df-529c88995fdc" }, - "3034": { + "3035": { "varname": "postfix_logfile_icinga_url", "caption": "Postfix Logfile: Icinga URL", "description": "Monitoring server API URL. Example: `https://monitoring.example.com:5665`.", @@ -31680,7 +31691,7 @@ }, "uuid": "19907566-ba39-4b48-94fd-37dc7abf8ce7" }, - "3035": { + "3036": { "varname": "postfix_logfile_icinga_username", "caption": "Postfix Logfile: Icinga Username", "description": "Monitoring server API username.", @@ -31691,7 +31702,7 @@ }, "uuid": "bb712ebb-107c-40c8-9a7e-7c39beb00276" }, - "3036": { + "3037": { "varname": "postfix_logfile_ignore", "caption": "Postfix Logfile: Ignore", "description": "Ignore a log line matching this Python regular expression. The log line is lowercased before matching, so write the pattern in lowercase (or use the `(?i)` flag). Can be specified multiple times. Example: `--ignore='status=bounced'`.", @@ -31702,7 +31713,7 @@ }, "uuid": "fb749dd6-d237-4f19-9211-8771801e906b" }, - "3037": { + "3038": { "varname": "postfix_logfile_insecure", "caption": "Postfix Logfile: Insecure?", "description": "Applies to the connection to the monitoring server that `--icinga-callback` makes, which is the only network connection this check opens. This option explicitly allows insecure SSL connections.", @@ -31711,7 +31722,7 @@ "settings": {}, "uuid": "005f371c-d3d7-4362-969f-382c6c0ab23a" }, - "3038": { + "3039": { "varname": "postfix_logfile_lookback", "caption": "Postfix Logfile: Lookback", "description": "Failed logins, rejected messages, aborted connections, deferred and bounced deliveries are counted within this window rather than reported one by one. Time window in seconds to look back over, ending at the moment of the run. Only what falls within it is counted, so what is reported is how often something happened lately rather than a total that keeps growing for as long as the source is kept. Example: `--lookback=3600`.", @@ -31722,7 +31733,7 @@ }, "uuid": "e5566f18-9f61-4baa-860f-4b90a8aa7565" }, - "3039": { + "3040": { "varname": "postfix_logfile_match", "caption": "Postfix Logfile: Match", "description": "Only consider a log line matching this Python regular expression. The log line is lowercased before matching, so write the pattern in lowercase (or use the `(?i)` flag). Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Example: `--match='postfix/smtpd'`.", @@ -31733,7 +31744,7 @@ }, "uuid": "6a11a263-9dce-4268-b96a-a50a1878ff02" }, - "3040": { + "3041": { "varname": "postfix_logfile_no_insecure", "caption": "Postfix Logfile: No Insecure?", "description": "Applies to the connection to the monitoring server that `--icinga-callback` makes, which is the only network connection this check opens. Verify the TLS certificate against the system trust store, overriding the insecure default of this check. Use it once the endpoint presents a publicly trusted certificate, or once its CA has been added to the system trust store.", @@ -31742,7 +31753,7 @@ "settings": {}, "uuid": "7a7fc621-7955-4d00-bade-86c7a6e8dffc" }, - "3041": { + "3042": { "varname": "postfix_logfile_no_match_severity", "caption": "Postfix Logfile: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -31755,7 +31766,7 @@ }, "uuid": "e62f91e0-abed-41bd-8455-8bbbbc730991" }, - "3042": { + "3043": { "varname": "postfix_logfile_no_per_source", "caption": "Postfix Logfile: No Per Source?", "description": "Judge a rate by everything that arrived within the window, whatever source the lines name. Use this where the log reaches this check through something that rewrites or drops the address of the peer, or where every source is as interesting as the next.", @@ -31764,7 +31775,7 @@ "settings": {}, "uuid": "224b8f8e-99d5-43fb-823a-cb82f9f4a9e4" }, - "3043": { + "3044": { "varname": "postfix_logfile_no_perfdata", "caption": "Postfix Logfile: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -31773,7 +31784,7 @@ "settings": {}, "uuid": "58c1a824-7950-4c2c-aeb7-ff879952618a" }, - "3044": { + "3045": { "varname": "postfix_logfile_no_proxy", "caption": "Postfix Logfile: No Proxy?", "description": "Applies to the connection to the monitoring server that `--icinga-callback` makes, which is the only network connection this check opens. Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -31782,7 +31793,7 @@ "settings": {}, "uuid": "10208ff0-d89a-4125-a8f8-a71dd5148ec1" }, - "3045": { + "3046": { "varname": "postfix_logfile_per_source", "caption": "Postfix Logfile: Per Source?", "description": "Judge a rate by the busiest single source address rather than by everything that arrived. A handful of failures from one address within the window is somebody working on this host; the same number spread over as many addresses is the background of an open network going past, and only the first is worth reporting. Lines that name no source are counted together as one, so a burst of those still reports.", @@ -31791,7 +31802,7 @@ "settings": {}, "uuid": "fdd5fdb8-8c8f-41eb-a799-9da0deeb859f" }, - "3046": { + "3047": { "varname": "postfix_logfile_proxy", "caption": "Postfix Logfile: Proxy", "description": "Applies to the connection to the monitoring server that `--icinga-callback` makes, which is the only network connection this check opens. Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -31802,7 +31813,7 @@ }, "uuid": "01603acf-a313-40cb-a091-88ee3e02f1d6" }, - "3047": { + "3048": { "varname": "postfix_logfile_rejects_critical", "caption": "Postfix Logfile: Rejects Critical", "description": "Number of messages the server turned away within `--lookback` that returns CRITICAL. 0 turns the threshold off. Example: `--rejects-critical=200`.", @@ -31813,7 +31824,7 @@ }, "uuid": "09888df9-73e8-439d-ac12-607c84ebd680" }, - "3048": { + "3049": { "varname": "postfix_logfile_rejects_warning", "caption": "Postfix Logfile: Rejects Warning", "description": "Number of messages the server turned away within `--lookback` that returns WARNING. Counted per source address. A server that answers the internet turns mail away all day and wants this raised. 0 turns the threshold off. Example: `--rejects-warning=50`.", @@ -31824,7 +31835,7 @@ }, "uuid": "e03f28ac-155b-4d15-888f-3d9fabf511a3" }, - "3049": { + "3050": { "varname": "postfix_logfile_relay_failures_critical", "caption": "Postfix Logfile: Relay Failures Critical", "description": "Number of failed connections to the next hop within `--lookback` that returns CRITICAL. 0 turns the threshold off. Example: `--relay-failures-critical=500`.", @@ -31835,7 +31846,7 @@ }, "uuid": "7678c3e6-ae35-4748-a495-6a4b74509405" }, - "3050": { + "3051": { "varname": "postfix_logfile_relay_failures_warning", "caption": "Postfix Logfile: Relay Failures Warning", "description": "Number of failed connections to the next hop within `--lookback` that returns WARNING. A host without an IPv6 route logs one for the AAAA record of its relay and delivers over IPv4 in the same second, so a single one is not a failure; a relay that is really down produces them by the dozen. 0 turns the threshold off. Example: `--relay-failures-warning=5`.", @@ -31846,7 +31857,7 @@ }, "uuid": "cf23623d-6a8f-4bd0-9563-10d468346600" }, - "3051": { + "3052": { "varname": "postfix_logfile_server_log", "caption": "Postfix Logfile: Server Log", "description": "Log source to read from. Accepts a file path, `docker:CONTAINER`, `podman:CONTAINER`, `kubectl:CONTAINER` or `systemd:UNITNAME`. Can be specified multiple times, and everything named is then read as one window; a source named twice is read once. If omitted, the check takes `maillog_file` from the Postfix configuration where it is set, falls back to the mail log of the distribution, and reads the journal of the Postfix unit along with it; what the two share is counted once. Example: `--server-log=systemd:postfix.service`.", @@ -31857,7 +31868,7 @@ }, "uuid": "b1cc71a8-88dc-40b3-91ff-8e7eced8e781" }, - "3052": { + "3053": { "varname": "postfix_logfile_timeout", "caption": "Postfix Logfile: Timeout", "description": "Network timeout in seconds.", @@ -31868,7 +31879,7 @@ }, "uuid": "c29642b0-620f-44f5-a63f-7da491ddc190" }, - "3053": { + "3054": { "varname": "postfix_logfile_tls_failures_critical", "caption": "Postfix Logfile: TLS Failures Critical", "description": "Number of TLS connections that did not come off within `--lookback` that returns CRITICAL. 0 turns the threshold off. Example: `--tls-failures-critical=500`.", @@ -31879,7 +31890,7 @@ }, "uuid": "2c1ba4f1-c10a-4db4-aaf2-579a95071a0e" }, - "3054": { + "3055": { "varname": "postfix_logfile_tls_failures_warning", "caption": "Postfix Logfile: TLS Failures Warning", "description": "Number of TLS connections that did not come off within `--lookback` that returns WARNING. A single one is one remote server having a bad day; a server that answers the internet collects those all day. 0 turns the threshold off. Example: `--tls-failures-warning=5`.", @@ -31890,7 +31901,7 @@ }, "uuid": "f32c4265-4fb4-4288-bb2e-7a626aec2032" }, - "3055": { + "3056": { "varname": "postfix_logfile_warning_level", "caption": "Postfix Logfile: Warning Level", "description": "Least severe Postfix log level that returns WARNING. Each level includes everything more severe than itself, and a level that `--critical-level` already covers returns CRITICAL instead. Case-sensitive. `none` lets no level return WARNING, which leaves the events this check names as the only way to reach it. Example: `--warning-level=error`.", @@ -31903,7 +31914,7 @@ }, "uuid": "eab3e90e-7dff-48b2-95d4-c4cf3099afeb" }, - "3056": { + "3057": { "varname": "postfix_version_always_ok", "caption": "Postfix Version: Always OK?", "description": "Always returns OK.", @@ -31912,7 +31923,7 @@ "settings": {}, "uuid": "61b50348-8e1c-4910-bac3-64ad1b8b5c88" }, - "3057": { + "3058": { "varname": "postfix_version_check_major", "caption": "Postfix Version: Check Major?", "description": "Alert when a new major release is available, even if the current version is not yet EOL. Example: running v26 (not yet EOL) and v27 is available.", @@ -31921,7 +31932,7 @@ "settings": {}, "uuid": "42d3e7ad-e43d-4d81-849c-bbcc13f5f9e3" }, - "3058": { + "3059": { "varname": "postfix_version_check_minor", "caption": "Postfix Version: Check Minor?", "description": "Alert when a new major.minor release is available, even if the current version is not yet EOL. Example: running v26.2 (not yet EOL) and v26.3 is available.", @@ -31930,7 +31941,7 @@ "settings": {}, "uuid": "6a256ee5-898e-4434-9132-e6af9da5ae61" }, - "3059": { + "3060": { "varname": "postfix_version_check_patch", "caption": "Postfix Version: Check Patch?", "description": "Alert when a new major.minor.patch release is available, even if the current version is not yet EOL. Example: running v26.2.7 (not yet EOL) and v26.2.8 is available.", @@ -31939,7 +31950,7 @@ "settings": {}, "uuid": "17ec1fc3-0179-4141-b262-aa3fe6e28a71" }, - "3060": { + "3061": { "varname": "postfix_version_insecure", "caption": "Postfix Version: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -31948,7 +31959,7 @@ "settings": {}, "uuid": "ac0bffb5-5840-45ac-97cd-ec173685142f" }, - "3061": { + "3062": { "varname": "postfix_version_no_perfdata", "caption": "Postfix Version: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -31957,7 +31968,7 @@ "settings": {}, "uuid": "51c586ec-93a0-42ac-b007-1402a3788edf" }, - "3062": { + "3063": { "varname": "postfix_version_no_proxy", "caption": "Postfix Version: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -31966,7 +31977,7 @@ "settings": {}, "uuid": "04d06168-2667-4d52-b6d5-6e6f9b06792f" }, - "3063": { + "3064": { "varname": "postfix_version_offset_eol", "caption": "Postfix Version: Offset Eol", "description": "Alert n days before (\"-30\") or after an EOL date (\"30\" or \"+30\").", @@ -31977,7 +31988,7 @@ }, "uuid": "78c17fb7-2f6b-4a96-8fd8-e353e56247e7" }, - "3064": { + "3065": { "varname": "postfix_version_path", "caption": "Postfix Version: Path", "description": "Path to the Postfix binary. Resolved via $PATH when given without a directory.", @@ -31988,7 +31999,7 @@ }, "uuid": "700d0ad2-c620-46e6-ac01-6d37be0831aa" }, - "3065": { + "3066": { "varname": "postfix_version_proxy", "caption": "Postfix Version: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -31999,7 +32010,7 @@ }, "uuid": "ef417fb4-58c6-4af3-a7a7-0e875c2ec69e" }, - "3066": { + "3067": { "varname": "postfix_version_timeout", "caption": "Postfix Version: Timeout", "description": "Network timeout in seconds.", @@ -32010,7 +32021,7 @@ }, "uuid": "91111c27-db15-4d4b-9558-84d841e97416" }, - "3067": { + "3068": { "varname": "postfix_version_unreachable_severity", "caption": "Postfix Version: Unreachable Severity", "description": "State to report when the online source is unreachable. What is used instead - bundled offline data, a cached copy, or nothing at all - is named in the output, and a clean result then only covers what that fallback could confirm.", @@ -32023,7 +32034,7 @@ }, "uuid": "77186e78-e2aa-4045-9e84-35d6eeea7d7a" }, - "3068": { + "3069": { "varname": "postgresql_version_always_ok", "caption": "Postgresql Version: Always OK?", "description": "Always returns OK.", @@ -32032,7 +32043,7 @@ "settings": {}, "uuid": "d4e4e22d-1b83-463c-8eda-7b6aacfcc615" }, - "3069": { + "3070": { "varname": "postgresql_version_check_major", "caption": "Postgresql Version: Check Major?", "description": "Alert when a new major release is available, even if the current version is not yet EOL. Example: running v26 (not yet EOL) and v27 is available.", @@ -32041,7 +32052,7 @@ "settings": {}, "uuid": "ba1adf33-f6a4-4b2f-8060-5865491f54e4" }, - "3070": { + "3071": { "varname": "postgresql_version_check_minor", "caption": "Postgresql Version: Check Minor?", "description": "Alert when a new major.minor release is available, even if the current version is not yet EOL. Example: running v26.2 (not yet EOL) and v26.3 is available.", @@ -32050,7 +32061,7 @@ "settings": {}, "uuid": "b3c2dec1-059f-40e5-bde8-f2cce67b49ca" }, - "3071": { + "3072": { "varname": "postgresql_version_check_patch", "caption": "Postgresql Version: Check Patch?", "description": "Alert when a new major.minor.patch release is available, even if the current version is not yet EOL. Example: running v26.2.7 (not yet EOL) and v26.2.8 is available.", @@ -32059,7 +32070,7 @@ "settings": {}, "uuid": "682d580e-583b-4282-93c7-52575b35cd3f" }, - "3072": { + "3073": { "varname": "postgresql_version_insecure", "caption": "Postgresql Version: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -32068,7 +32079,7 @@ "settings": {}, "uuid": "50fff7bb-9983-42df-8ab1-33f8542a087f" }, - "3073": { + "3074": { "varname": "postgresql_version_no_perfdata", "caption": "Postgresql Version: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -32077,7 +32088,7 @@ "settings": {}, "uuid": "e976f867-8c39-49a5-84b7-f766148b5a7c" }, - "3074": { + "3075": { "varname": "postgresql_version_no_proxy", "caption": "Postgresql Version: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -32086,7 +32097,7 @@ "settings": {}, "uuid": "ee78cb07-0400-4483-b631-c518e9b98b8e" }, - "3075": { + "3076": { "varname": "postgresql_version_offset_eol", "caption": "Postgresql Version: Offset Eol", "description": "Alert n days before (\"-30\") or after an EOL date (\"30\" or \"+30\").", @@ -32097,7 +32108,7 @@ }, "uuid": "d04d9b28-d206-42ef-9748-ed7c24e33002" }, - "3076": { + "3077": { "varname": "postgresql_version_path", "caption": "Postgresql Version: Path", "description": "Path to the psql binary. Resolved via $PATH when given without a directory.", @@ -32108,7 +32119,7 @@ }, "uuid": "f79e928b-c52b-4ed2-a1ba-53884e314c50" }, - "3077": { + "3078": { "varname": "postgresql_version_proxy", "caption": "Postgresql Version: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -32119,7 +32130,7 @@ }, "uuid": "bcdfdc78-fd1e-4769-9368-1dfc8f8844c6" }, - "3078": { + "3079": { "varname": "postgresql_version_timeout", "caption": "Postgresql Version: Timeout", "description": "Network timeout in seconds.", @@ -32130,7 +32141,7 @@ }, "uuid": "58d4de13-e37e-4258-a560-357ea5017ee5" }, - "3079": { + "3080": { "varname": "postgresql_version_unreachable_severity", "caption": "Postgresql Version: Unreachable Severity", "description": "State to report when the online source is unreachable. What is used instead - bundled offline data, a cached copy, or nothing at all - is named in the output, and a clean result then only covers what that fallback could confirm.", @@ -32143,7 +32154,7 @@ }, "uuid": "4c7dce9d-41b5-4d9d-a553-941535f7fdb4" }, - "3080": { + "3081": { "varname": "postgresql_version_username", "caption": "Postgresql Version: Username", "description": "PostgreSQL username for running `psql`.", @@ -32154,7 +32165,7 @@ }, "uuid": "1d10e457-6fbd-428e-9fb2-0ee0a8d89330" }, - "3081": { + "3082": { "varname": "procs_always_ok", "caption": "Procs: Always OK?", "description": "Always returns OK.", @@ -32163,7 +32174,7 @@ "settings": {}, "uuid": "607cd1b0-99ae-406e-9a3b-0a736c10e7ea" }, - "3082": { + "3083": { "varname": "procs_argument", "caption": "Procs: Argument", "description": "Filter by command line arguments. Uses Python regular expressions. Case-insensitive. Example: `--argument=\"--config.*production\"`", @@ -32174,7 +32185,7 @@ }, "uuid": "2f05e013-bbbe-41d1-87dd-adb2860672c4" }, - "3083": { + "3084": { "varname": "procs_command", "caption": "Procs: Command", "description": "Filter by process name. Uses Python regular expressions. Case-insensitive. Example: `--command=\"^(apache|httpd)\"`", @@ -32185,7 +32196,7 @@ }, "uuid": "a92a6aef-0348-4d68-a1d9-0c52949b29e2" }, - "3084": { + "3085": { "varname": "procs_critical", "caption": "Procs: Critical", "description": "CRIT threshold for the number of matching processes.", @@ -32196,7 +32207,7 @@ }, "uuid": "d7ef1ad4-8744-4f8c-9ff0-64853458f8d7" }, - "3085": { + "3086": { "varname": "procs_critical_age", "caption": "Procs: Critical Age", "description": "CRIT threshold for age of the oldest matching process, in seconds.", @@ -32207,7 +32218,7 @@ }, "uuid": "a6ce9f19-7f48-4bb1-bfd9-543af72746e4" }, - "3086": { + "3087": { "varname": "procs_critical_cpu_percent", "caption": "Procs: Critical CPU Percent", "description": "CRIT threshold for aggregated CPU usage of all matching processes, in percent. Requires two consecutive check runs to calculate. 100% equals one fully utilized CPU core.", @@ -32218,7 +32229,7 @@ }, "uuid": "883dad67-7928-40e1-a9ef-6563ebc4ed93" }, - "3087": { + "3088": { "varname": "procs_critical_mem", "caption": "Procs: Critical Memory", "description": "CRIT threshold for aggregated memory usage, in bytes.", @@ -32229,7 +32240,7 @@ }, "uuid": "082cc9eb-e3d2-450e-9dea-e351ecae3cd0" }, - "3088": { + "3089": { "varname": "procs_critical_mem_percent", "caption": "Procs: Critical Memory Percent", "description": "CRIT threshold for aggregated memory usage, in percent.", @@ -32240,7 +32251,7 @@ }, "uuid": "3a42c0a0-67ee-42bc-b514-390d1ba795f2" }, - "3089": { + "3090": { "varname": "procs_lengthy", "caption": "Procs: Lengthy?", "description": "Extended reporting.", @@ -32249,7 +32260,7 @@ "settings": {}, "uuid": "8adaceba-0a08-4d11-8c0c-dfe0b61aa17f" }, - "3090": { + "3091": { "varname": "procs_no_kthreads", "caption": "Procs: No KThreads?", "description": "Exclude kernel threads from the scan (Linux only).", @@ -32258,7 +32269,7 @@ "settings": {}, "uuid": "25bf1d6b-1284-481a-9d43-153ed2ca43dc" }, - "3091": { + "3092": { "varname": "procs_no_perfdata", "caption": "Procs: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -32267,7 +32278,7 @@ "settings": {}, "uuid": "e42fd8c8-3dd1-454a-a614-83dc1a5aee3e" }, - "3092": { + "3093": { "varname": "procs_status", "caption": "Procs: Status", "description": "Filter by process status.", @@ -32280,7 +32291,7 @@ }, "uuid": "420a87a9-9ef9-4d4e-9931-7e37536397cb" }, - "3093": { + "3094": { "varname": "procs_top", "caption": "Procs: Top", "description": "Number of top processes by CPU time to display. Processes with zero CPU time are excluded. Use `--top=0` to disable.", @@ -32291,7 +32302,7 @@ }, "uuid": "f279f834-a707-4da9-9ea5-22acda8c558b" }, - "3094": { + "3095": { "varname": "procs_username", "caption": "Procs: Username", "description": "Filter by user name. Uses Python regular expressions. Case-insensitive. Example: `--username=\"^(apache|www-data)$\"`", @@ -32302,7 +32313,7 @@ }, "uuid": "89d5757b-04b0-444f-98af-dd65bdd2dc5d" }, - "3095": { + "3096": { "varname": "procs_warning", "caption": "Procs: Warning", "description": "WARN threshold for the number of matching processes.", @@ -32313,7 +32324,7 @@ }, "uuid": "f503bdb1-a9df-44ad-9c46-dbfd59531ee9" }, - "3096": { + "3097": { "varname": "procs_warning_age", "caption": "Procs: Warning Age", "description": "WARN threshold for age of the oldest matching process, in seconds.", @@ -32324,7 +32335,7 @@ }, "uuid": "4bc69774-4b1c-4f8c-9485-014c6d449dda" }, - "3097": { + "3098": { "varname": "procs_warning_cpu_percent", "caption": "Procs: Warning CPU Percent", "description": "WARN threshold for aggregated CPU usage of all matching processes, in percent. Requires two consecutive check runs to calculate. 100% equals one fully utilized CPU core.", @@ -32335,7 +32346,7 @@ }, "uuid": "13668f24-9c42-4fb3-920b-eb1d27da45d6" }, - "3098": { + "3099": { "varname": "procs_warning_mem", "caption": "Procs: Warning Memory", "description": "WARN threshold for aggregated memory usage, in bytes.", @@ -32346,7 +32357,7 @@ }, "uuid": "d4597d61-14ed-4fc2-b516-24f7c42f29d8" }, - "3099": { + "3100": { "varname": "procs_warning_mem_percent", "caption": "Procs: Warning Memory Percent", "description": "WARN threshold for aggregated memory usage, in percent.", @@ -32357,7 +32368,7 @@ }, "uuid": "5f4edaf4-f4cf-4a65-9895-37e8aa54f0a2" }, - "3100": { + "3101": { "varname": "procs_windows_always_ok", "caption": "Procs: Always OK?", "description": "Always returns OK.", @@ -32366,7 +32377,7 @@ "settings": {}, "uuid": "c1ab7e89-c80a-491b-926a-612e843b4b4b" }, - "3101": { + "3102": { "varname": "procs_windows_argument", "caption": "Procs: Argument", "description": "Filter by command line arguments. Uses Python regular expressions. Case-insensitive. Example: `--argument=\"--config.*production\"`", @@ -32377,7 +32388,7 @@ }, "uuid": "8b433173-a4a3-45f6-9b11-313d32cbc8a8" }, - "3102": { + "3103": { "varname": "procs_windows_command", "caption": "Procs: Command", "description": "Filter by process name. Uses Python regular expressions. Case-insensitive. Example: `--command=\"^(apache|httpd)\"`", @@ -32388,7 +32399,7 @@ }, "uuid": "7b50ebbb-5aa3-4294-9874-e9fa3d86e90b" }, - "3103": { + "3104": { "varname": "procs_windows_critical", "caption": "Procs: Critical", "description": "CRIT threshold for the number of matching processes.", @@ -32399,7 +32410,7 @@ }, "uuid": "308cad68-29a8-4229-9e8f-288e0d39dc51" }, - "3104": { + "3105": { "varname": "procs_windows_critical_age", "caption": "Procs: Critical Age", "description": "CRIT threshold for age of the oldest matching process, in seconds.", @@ -32410,7 +32421,7 @@ }, "uuid": "b0357195-062d-49b1-91e4-85b4e17c327b" }, - "3105": { + "3106": { "varname": "procs_windows_critical_cpu_percent", "caption": "Procs: Critical CPU Percent", "description": "CRIT threshold for aggregated CPU usage of all matching processes, in percent. Requires two consecutive check runs to calculate. 100% equals one fully utilized CPU core.", @@ -32421,7 +32432,7 @@ }, "uuid": "1c4f90b6-2cd7-4dbd-81be-bfa2b7e83b1e" }, - "3106": { + "3107": { "varname": "procs_windows_critical_mem", "caption": "Procs: Critical Memory", "description": "CRIT threshold for aggregated memory usage, in bytes.", @@ -32432,7 +32443,7 @@ }, "uuid": "42ceb239-0a36-4f46-a0c1-6c8d10d06f5f" }, - "3107": { + "3108": { "varname": "procs_windows_critical_mem_percent", "caption": "Procs: Critical Memory Percent", "description": "CRIT threshold for aggregated memory usage, in percent.", @@ -32443,7 +32454,7 @@ }, "uuid": "29d7f6f8-8d9a-4fea-b0e6-3fe37f8f4c7b" }, - "3108": { + "3109": { "varname": "procs_windows_lengthy", "caption": "Procs: Lengthy?", "description": "Extended reporting.", @@ -32452,7 +32463,7 @@ "settings": {}, "uuid": "5aec4169-489f-4610-a8e0-98282ea2ebfa" }, - "3109": { + "3110": { "varname": "procs_windows_no_kthreads", "caption": "Procs: No KThreads?", "description": "Exclude kernel threads from the scan (Linux only).", @@ -32461,7 +32472,7 @@ "settings": {}, "uuid": "f1e51251-c2f3-45e5-b941-d8f178472504" }, - "3110": { + "3111": { "varname": "procs_windows_no_perfdata", "caption": "Procs: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -32470,7 +32481,7 @@ "settings": {}, "uuid": "6ff96524-9ff2-4cc7-8a6a-35305ffa7d5f" }, - "3111": { + "3112": { "varname": "procs_windows_status", "caption": "Procs: Status", "description": "Filter by process status.", @@ -32483,7 +32494,7 @@ }, "uuid": "479980ff-1661-41c3-b1b7-9d866b197884" }, - "3112": { + "3113": { "varname": "procs_windows_top", "caption": "Procs: Top", "description": "Number of top processes by CPU time to display. Processes with zero CPU time are excluded. Use `--top=0` to disable.", @@ -32494,7 +32505,7 @@ }, "uuid": "abdc41bb-dc94-48dd-ad09-2f02b5c7312e" }, - "3113": { + "3114": { "varname": "procs_windows_username", "caption": "Procs: Username", "description": "Filter by user name. Uses Python regular expressions. Case-insensitive. Example: `--username=\"^(apache|www-data)$\"`", @@ -32505,7 +32516,7 @@ }, "uuid": "8dede2b2-0542-4a75-99e3-66f0073d61b9" }, - "3114": { + "3115": { "varname": "procs_windows_warning", "caption": "Procs: Warning", "description": "WARN threshold for the number of matching processes.", @@ -32516,7 +32527,7 @@ }, "uuid": "c285a3f7-3125-4b11-8593-bfd5717c6a39" }, - "3115": { + "3116": { "varname": "procs_windows_warning_age", "caption": "Procs: Warning Age", "description": "WARN threshold for age of the oldest matching process, in seconds.", @@ -32527,7 +32538,7 @@ }, "uuid": "31d5c5a9-b49f-472b-bd61-ed73bd9439c9" }, - "3116": { + "3117": { "varname": "procs_windows_warning_cpu_percent", "caption": "Procs: Warning CPU Percent", "description": "WARN threshold for aggregated CPU usage of all matching processes, in percent. Requires two consecutive check runs to calculate. 100% equals one fully utilized CPU core.", @@ -32538,7 +32549,7 @@ }, "uuid": "4c033fd2-c3b6-4591-8ce6-65640f27696f" }, - "3117": { + "3118": { "varname": "procs_windows_warning_mem", "caption": "Procs: Warning Memory", "description": "WARN threshold for aggregated memory usage, in bytes.", @@ -32549,7 +32560,7 @@ }, "uuid": "467822e7-aa4e-4e70-89dd-ef3673f3745d" }, - "3118": { + "3119": { "varname": "procs_windows_warning_mem_percent", "caption": "Procs: Warning Memory Percent", "description": "WARN threshold for aggregated memory usage, in percent.", @@ -32560,7 +32571,7 @@ }, "uuid": "c1698394-a266-471b-8db9-419a3c62a3c9" }, - "3119": { + "3120": { "varname": "psi_cpu_always_ok", "caption": "Psi CPU: Always OK?", "description": "Always returns OK.", @@ -32569,7 +32580,7 @@ "settings": {}, "uuid": "92f46782-bf9f-4613-a209-57606de3abd5" }, - "3120": { + "3121": { "varname": "psi_cpu_critical", "caption": "Psi CPU: Critical", "description": "CRIT threshold for the CPU pressure, in percent of wall clock time, measured over the last five minutes. Supports Nagios ranges. Example: `80` alerts where work waits for a CPU 80 percent of the time.", @@ -32580,7 +32591,7 @@ }, "uuid": "6ad3f1b8-b348-4821-ac96-eb320404b2f1" }, - "3121": { + "3122": { "varname": "psi_cpu_critical_avg10", "caption": "Psi CPU: Critical Avg10", "description": "CRIT threshold for the CPU pressure, in percent of wall clock time, measured over the last ten seconds. Catches a burst that the five minute average smooths away, at the price of alerting on a stall that is over before anybody looks. Supports Nagios ranges. Example: `90` alerts where work waited for a CPU for nine of the last ten seconds. Default: no critical threshold", @@ -32591,7 +32602,7 @@ }, "uuid": "656de428-3a88-4fc8-b2ef-36f5fb528384" }, - "3122": { + "3123": { "varname": "psi_cpu_no_perfdata", "caption": "Psi CPU: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -32600,7 +32611,7 @@ "settings": {}, "uuid": "cf142433-5534-4090-b516-c3881300e3dc" }, - "3123": { + "3124": { "varname": "psi_cpu_severity_no_psi", "caption": "Psi CPU: Severity No Psi", "description": "Severity for alerting if the kernel keeps no pressure statistics.", @@ -32613,7 +32624,7 @@ }, "uuid": "ea36d39d-8ea2-4730-ad5d-94550b69a4c3" }, - "3124": { + "3125": { "varname": "psi_cpu_warning", "caption": "Psi CPU: Warning", "description": "WARN threshold for the CPU pressure, in percent of wall clock time, measured over the last five minutes. Supports Nagios ranges. Example: `50` alerts where work waits for a CPU 50 percent of the time.", @@ -32624,7 +32635,7 @@ }, "uuid": "fe14dcbc-0b07-41d0-b8e0-f49728e7ba60" }, - "3125": { + "3126": { "varname": "psi_cpu_warning_avg10", "caption": "Psi CPU: Warning Avg10", "description": "WARN threshold for the CPU pressure, in percent of wall clock time, measured over the last ten seconds. Catches a burst that the five minute average smooths away, at the price of alerting on a stall that is over before anybody looks. Supports Nagios ranges. Example: `80` alerts where work waited for a CPU for eight of the last ten seconds. Default: no warning threshold", @@ -32635,7 +32646,7 @@ }, "uuid": "497780b3-7ad5-4ca6-96ea-a32b03936277" }, - "3126": { + "3127": { "varname": "psi_io_always_ok", "caption": "Psi I/O: Always OK?", "description": "Always returns OK.", @@ -32644,7 +32655,7 @@ "settings": {}, "uuid": "77eac798-428b-4d21-88b8-99993036014d" }, - "3127": { + "3128": { "varname": "psi_io_critical", "caption": "Psi I/O: Critical", "description": "CRIT threshold for the storage pressure, in percent of wall clock time, measured over the last five minutes. Supports Nagios ranges. Example: `30` alerts where 30 percent of the time is lost.", @@ -32655,7 +32666,7 @@ }, "uuid": "762f972f-b5e8-45ba-88a0-2ac85d31c1a7" }, - "3128": { + "3129": { "varname": "psi_io_critical_avg10", "caption": "Psi I/O: Critical Avg10", "description": "CRIT threshold for the storage pressure, in percent of wall clock time, measured over the last ten seconds. Catches a burst that the five minute average smooths away, at the price of alerting on a stall that is over before anybody looks. Supports Nagios ranges. Example: `90` alerts where the storage stood still for nine of the last ten seconds. Default: no critical threshold", @@ -32666,7 +32677,7 @@ }, "uuid": "4f2c6d07-635f-40e2-ab55-58b823d6e050" }, - "3129": { + "3130": { "varname": "psi_io_no_perfdata", "caption": "Psi I/O: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -32675,7 +32686,7 @@ "settings": {}, "uuid": "a4ae1203-d80c-447e-80e4-1fde27668ac1" }, - "3130": { + "3131": { "varname": "psi_io_severity_no_psi", "caption": "Psi I/O: Severity No Psi", "description": "Severity for alerting if the kernel keeps no pressure statistics.", @@ -32688,7 +32699,7 @@ }, "uuid": "37decba3-fa7c-4cc0-b815-6c05e821780f" }, - "3131": { + "3132": { "varname": "psi_io_warning", "caption": "Psi I/O: Warning", "description": "WARN threshold for the storage pressure, in percent of wall clock time, measured over the last five minutes. Supports Nagios ranges. Example: `15` alerts where 15 percent of the time is lost.", @@ -32699,7 +32710,7 @@ }, "uuid": "5d9cfe96-a69c-4d2f-9277-088d301cddff" }, - "3132": { + "3133": { "varname": "psi_io_warning_avg10", "caption": "Psi I/O: Warning Avg10", "description": "WARN threshold for the storage pressure, in percent of wall clock time, measured over the last ten seconds. Catches a burst that the five minute average smooths away, at the price of alerting on a stall that is over before anybody looks. Supports Nagios ranges. Example: `80` alerts where the storage stood still for eight of the last ten seconds. Default: no warning threshold", @@ -32710,7 +32721,7 @@ }, "uuid": "a7eb62f7-1ee2-43ac-9fc5-3cd26c2362b2" }, - "3133": { + "3134": { "varname": "psi_irq_always_ok", "caption": "Psi Irq: Always OK?", "description": "Always returns OK.", @@ -32719,7 +32730,7 @@ "settings": {}, "uuid": "f7f6259a-0ded-4b3e-bfd8-197d2a8ce2fb" }, - "3134": { + "3135": { "varname": "psi_irq_critical", "caption": "Psi Irq: Critical", "description": "CRIT threshold for the interrupt pressure, in percent of wall clock time, measured over the last five minutes. Supports Nagios ranges. Example: `25` alerts where 25 percent of the time is lost.", @@ -32730,7 +32741,7 @@ }, "uuid": "ee768966-ee43-40ae-b0a9-0e6dd411a579" }, - "3135": { + "3136": { "varname": "psi_irq_critical_avg10", "caption": "Psi Irq: Critical Avg10", "description": "CRIT threshold for the interrupt pressure, in percent of wall clock time, measured over the last ten seconds. Catches a burst that the five minute average smooths away, at the price of alerting on a stall that is over before anybody looks. Supports Nagios ranges. Example: `60` alerts where interrupt handling took six of the last ten seconds. Default: no critical threshold", @@ -32741,7 +32752,7 @@ }, "uuid": "2f37c9ba-9e99-4de2-8dec-fc5a861a12e2" }, - "3136": { + "3137": { "varname": "psi_irq_no_perfdata", "caption": "Psi Irq: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -32750,7 +32761,7 @@ "settings": {}, "uuid": "205dd3ef-e510-4181-8464-375ebca74a3d" }, - "3137": { + "3138": { "varname": "psi_irq_severity_no_psi", "caption": "Psi Irq: Severity No Psi", "description": "Severity for alerting if the kernel keeps no pressure statistics.", @@ -32763,7 +32774,7 @@ }, "uuid": "63d29f3b-c1c9-4965-980a-4c59d5d71b2a" }, - "3138": { + "3139": { "varname": "psi_irq_warning", "caption": "Psi Irq: Warning", "description": "WARN threshold for the interrupt pressure, in percent of wall clock time, measured over the last five minutes. Supports Nagios ranges. Example: `10` alerts where 10 percent of the time is lost.", @@ -32774,7 +32785,7 @@ }, "uuid": "acefa408-c96e-410e-be21-4233c0f09199" }, - "3139": { + "3140": { "varname": "psi_irq_warning_avg10", "caption": "Psi Irq: Warning Avg10", "description": "WARN threshold for the interrupt pressure, in percent of wall clock time, measured over the last ten seconds. Catches a burst that the five minute average smooths away, at the price of alerting on a stall that is over before anybody looks. Supports Nagios ranges. Example: `40` alerts where interrupt handling took four of the last ten seconds. Default: no warning threshold", @@ -32785,7 +32796,7 @@ }, "uuid": "866c8487-6310-4bec-bf5f-2191fbf698f8" }, - "3140": { + "3141": { "varname": "psi_memory_always_ok", "caption": "Psi Memory: Always OK?", "description": "Always returns OK.", @@ -32794,7 +32805,7 @@ "settings": {}, "uuid": "dbc982a1-2e4e-4ecc-b325-76bc99312167" }, - "3141": { + "3142": { "varname": "psi_memory_critical", "caption": "Psi Memory: Critical", "description": "CRIT threshold for the memory pressure, in percent of wall clock time, measured over the last five minutes. Supports Nagios ranges. Example: `10` alerts where 10 percent of the time is lost.", @@ -32805,7 +32816,7 @@ }, "uuid": "35f1e3df-1f54-407c-8852-1a9e2397c893" }, - "3142": { + "3143": { "varname": "psi_memory_critical_avg10", "caption": "Psi Memory: Critical Avg10", "description": "CRIT threshold for the memory pressure, in percent of wall clock time, measured over the last ten seconds. Catches a burst that the five minute average smooths away, at the price of alerting on a stall that is over before anybody looks. Supports Nagios ranges. Example: `90` alerts where work waited for memory for nine of the last ten seconds. Default: no critical threshold", @@ -32816,7 +32827,7 @@ }, "uuid": "16844797-656d-4558-929c-986beb98fe91" }, - "3143": { + "3144": { "varname": "psi_memory_no_perfdata", "caption": "Psi Memory: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -32825,7 +32836,7 @@ "settings": {}, "uuid": "f6774261-eec8-44f0-be3a-e92d3e51ce8c" }, - "3144": { + "3145": { "varname": "psi_memory_severity_no_psi", "caption": "Psi Memory: Severity No Psi", "description": "Severity for alerting if the kernel keeps no pressure statistics.", @@ -32838,7 +32849,7 @@ }, "uuid": "6dce2060-1a91-45ef-ad5c-b7abea279d59" }, - "3145": { + "3146": { "varname": "psi_memory_warning", "caption": "Psi Memory: Warning", "description": "WARN threshold for the memory pressure, in percent of wall clock time, measured over the last five minutes. Supports Nagios ranges. Example: `5` alerts where 5 percent of the time is lost.", @@ -32849,7 +32860,7 @@ }, "uuid": "e0837d79-29be-4a54-ab10-cbfbc6e5432a" }, - "3146": { + "3147": { "varname": "psi_memory_warning_avg10", "caption": "Psi Memory: Warning Avg10", "description": "WARN threshold for the memory pressure, in percent of wall clock time, measured over the last ten seconds. Catches a burst that the five minute average smooths away, at the price of alerting on a stall that is over before anybody looks. Supports Nagios ranges. Example: `80` alerts where work waited for memory for eight of the last ten seconds. Default: no warning threshold", @@ -32860,7 +32871,7 @@ }, "uuid": "1106a965-4cd5-4f56-a5b0-23e1a6d0f213" }, - "3147": { + "3148": { "varname": "python_version_always_ok", "caption": "Python Version: Always OK?", "description": "Always returns OK.", @@ -32869,7 +32880,7 @@ "settings": {}, "uuid": "39cdc3e4-7881-4e71-bedf-a49c1c67cfee" }, - "3148": { + "3149": { "varname": "python_version_check_major", "caption": "Python Version: Check Major?", "description": "Alert when a new major release is available, even if the current version is not yet EOL. Example: running v26 (not yet EOL) and v27 is available.", @@ -32878,7 +32889,7 @@ "settings": {}, "uuid": "1fb9e511-74ff-4c6f-b4de-b2073cb7ce1e" }, - "3149": { + "3150": { "varname": "python_version_check_minor", "caption": "Python Version: Check Minor?", "description": "Alert when a new major.minor release is available, even if the current version is not yet EOL. Example: running v26.2 (not yet EOL) and v26.3 is available.", @@ -32887,7 +32898,7 @@ "settings": {}, "uuid": "11f99b7a-53c0-4f8a-a481-4eb04b71e7e6" }, - "3150": { + "3151": { "varname": "python_version_check_patch", "caption": "Python Version: Check Patch?", "description": "Alert when a new major.minor.patch release is available, even if the current version is not yet EOL. Example: running v26.2.7 (not yet EOL) and v26.2.8 is available.", @@ -32896,7 +32907,7 @@ "settings": {}, "uuid": "fd21c3b7-bc64-4fc8-ba4e-1558dc131541" }, - "3151": { + "3152": { "varname": "python_version_insecure", "caption": "Python Version: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -32905,7 +32916,7 @@ "settings": {}, "uuid": "a87ba83c-d101-40b6-9bec-fb590dc1c045" }, - "3152": { + "3153": { "varname": "python_version_no_perfdata", "caption": "Python Version: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -32914,7 +32925,7 @@ "settings": {}, "uuid": "6056ba50-adea-4cc6-9418-ddca471a6455" }, - "3153": { + "3154": { "varname": "python_version_no_proxy", "caption": "Python Version: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -32923,7 +32934,7 @@ "settings": {}, "uuid": "4adbf2bf-2e01-42be-980d-059fab2e9c1c" }, - "3154": { + "3155": { "varname": "python_version_offset_eol", "caption": "Python Version: Offset Eol", "description": "Alert n days before (\"-30\") or after an EOL date (\"30\" or \"+30\").", @@ -32934,7 +32945,7 @@ }, "uuid": "40c4aaa2-d4b3-4df9-bd93-f6f70d5f6c99" }, - "3155": { + "3156": { "varname": "python_version_path", "caption": "Python Version: Path", "description": "Local path to your Python binary.", @@ -32945,7 +32956,7 @@ }, "uuid": "30b8f696-01c4-4a6a-8ac7-6a5fe4c9b887" }, - "3156": { + "3157": { "varname": "python_version_proxy", "caption": "Python Version: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -32956,7 +32967,7 @@ }, "uuid": "973dc0ab-e687-498e-b4a5-49b52b129631" }, - "3157": { + "3158": { "varname": "python_version_timeout", "caption": "Python Version: Timeout", "description": "Network timeout in seconds.", @@ -32967,7 +32978,7 @@ }, "uuid": "0a425655-4d8e-495d-8ac8-839d194c5ae3" }, - "3158": { + "3159": { "varname": "python_version_unreachable_severity", "caption": "Python Version: Unreachable Severity", "description": "State to report when the online source is unreachable. What is used instead - bundled offline data, a cached copy, or nothing at all - is named in the output, and a clean result then only covers what that fallback could confirm.", @@ -32980,7 +32991,7 @@ }, "uuid": "dc5872e8-e50f-4cd8-953d-698c52a425c7" }, - "3159": { + "3160": { "varname": "qts_cpu_usage_always_ok", "caption": "QTS CPU Usage: Always OK?", "description": "Always returns OK.", @@ -32989,7 +33000,7 @@ "settings": {}, "uuid": "6ea06958-b6ae-487c-87a8-7dbbde5a5fcb" }, - "3160": { + "3161": { "varname": "qts_cpu_usage_count", "caption": "QTS CPU Usage: Count", "description": "Number of consecutive checks the threshold must be exceeded before alerting.", @@ -33000,7 +33011,7 @@ }, "uuid": "b2c087d0-8981-4e8d-8fb6-34c359c7a14b" }, - "3161": { + "3162": { "varname": "qts_cpu_usage_critical", "caption": "QTS CPU Usage: Critical", "description": "CRIT threshold in percent. Supports Nagios ranges. Alerts only after `--count` consecutive runs above the threshold.", @@ -33011,7 +33022,7 @@ }, "uuid": "657a6653-d2e6-45a1-8622-7df960585c3f" }, - "3162": { + "3163": { "varname": "qts_cpu_usage_insecure", "caption": "QTS CPU Usage: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -33020,7 +33031,7 @@ "settings": {}, "uuid": "90ba0c69-9bd5-431d-9f5f-5b4df1a303c6" }, - "3163": { + "3164": { "varname": "qts_cpu_usage_no_perfdata", "caption": "QTS CPU Usage: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -33029,7 +33040,7 @@ "settings": {}, "uuid": "c2149d14-d966-48a9-bb06-c251c6614716" }, - "3164": { + "3165": { "varname": "qts_cpu_usage_no_proxy", "caption": "QTS CPU Usage: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -33038,7 +33049,7 @@ "settings": {}, "uuid": "4481c533-fefd-441b-a8c3-406b643b3f7a" }, - "3165": { + "3166": { "varname": "qts_cpu_usage_password", "caption": "QTS CPU Usage: Password", "description": "QTS API password.", @@ -33049,7 +33060,7 @@ }, "uuid": "aa28d5e8-b635-4e2c-80b8-825329811372" }, - "3166": { + "3167": { "varname": "qts_cpu_usage_proxy", "caption": "QTS CPU Usage: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -33060,7 +33071,7 @@ }, "uuid": "81dc4c05-fec9-41f0-be5d-d71bf7d5e0bd" }, - "3167": { + "3168": { "varname": "qts_cpu_usage_timeout", "caption": "QTS CPU Usage: Timeout", "description": "Network timeout in seconds.", @@ -33071,7 +33082,7 @@ }, "uuid": "3ec27acc-a716-4259-90c2-3b244f6b0b75" }, - "3168": { + "3169": { "varname": "qts_cpu_usage_url", "caption": "QTS CPU Usage: URL", "description": "QTS-based appliance URL. Example: `--url=https://192.0.2.10:8080`.", @@ -33082,7 +33093,7 @@ }, "uuid": "243e1bff-e818-4cbb-b464-b80589431d89" }, - "3169": { + "3170": { "varname": "qts_cpu_usage_username", "caption": "QTS CPU Usage: Username", "description": "QTS API username.", @@ -33093,7 +33104,7 @@ }, "uuid": "e5d06b2d-af8c-4f6d-9eec-5bdeda00e43c" }, - "3170": { + "3171": { "varname": "qts_cpu_usage_warning", "caption": "QTS CPU Usage: Warning", "description": "WARN threshold in percent. Supports Nagios ranges. Alerts only after `--count` consecutive runs above the threshold.", @@ -33104,7 +33115,7 @@ }, "uuid": "a05ab1b5-aac4-4722-ae0c-705c9cf3c229" }, - "3171": { + "3172": { "varname": "qts_disk_smart_always_ok", "caption": "QTS Disk SMART: Always OK?", "description": "Always returns OK.", @@ -33113,7 +33124,7 @@ "settings": {}, "uuid": "6e627a4e-40a5-44e2-a5bc-cfb1b36a3c24" }, - "3172": { + "3173": { "varname": "qts_disk_smart_insecure", "caption": "QTS Disk SMART: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -33122,7 +33133,7 @@ "settings": {}, "uuid": "11d1dbae-7e92-4bc7-83f2-76c1669c9340" }, - "3173": { + "3174": { "varname": "qts_disk_smart_no_perfdata", "caption": "QTS Disk SMART: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -33131,7 +33142,7 @@ "settings": {}, "uuid": "614b7aa8-e048-4666-b731-4a43377db758" }, - "3174": { + "3175": { "varname": "qts_disk_smart_no_proxy", "caption": "QTS Disk SMART: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -33140,7 +33151,7 @@ "settings": {}, "uuid": "31953bba-e8ea-4726-b639-938515417fca" }, - "3175": { + "3176": { "varname": "qts_disk_smart_password", "caption": "QTS Disk SMART: Password", "description": "QTS API password.", @@ -33151,7 +33162,7 @@ }, "uuid": "5ba57af4-190a-44d6-ac2f-d0645c98862a" }, - "3176": { + "3177": { "varname": "qts_disk_smart_proxy", "caption": "QTS Disk SMART: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -33162,7 +33173,7 @@ }, "uuid": "ba81b6fd-5864-411b-b30c-5963a3e4c6b4" }, - "3177": { + "3178": { "varname": "qts_disk_smart_timeout", "caption": "QTS Disk SMART: Timeout", "description": "Network timeout in seconds.", @@ -33173,7 +33184,7 @@ }, "uuid": "89004c22-37c5-402e-91ce-a1bce1de69b4" }, - "3178": { + "3179": { "varname": "qts_disk_smart_url", "caption": "QTS Disk SMART: URL", "description": "QTS-based appliance URL. Example: `--url=https://192.0.2.10:8080`.", @@ -33184,7 +33195,7 @@ }, "uuid": "9a12f567-b0ae-45be-a313-06df16bd354c" }, - "3179": { + "3180": { "varname": "qts_disk_smart_username", "caption": "QTS Disk SMART: Username", "description": "QTS API username.", @@ -33195,7 +33206,7 @@ }, "uuid": "1ae9a0fe-c4b4-4b39-bdb1-b537720a2ade" }, - "3180": { + "3181": { "varname": "qts_memory_usage_always_ok", "caption": "QTS Memory Usage: Always OK?", "description": "Always returns OK.", @@ -33204,7 +33215,7 @@ "settings": {}, "uuid": "8bf047f3-68d2-4762-ba3f-90aceae21f88" }, - "3181": { + "3182": { "varname": "qts_memory_usage_critical", "caption": "QTS Memory Usage: Critical", "description": "CRIT threshold for memory usage in percent. Supports Nagios ranges.", @@ -33215,7 +33226,7 @@ }, "uuid": "41986706-4cf8-4b50-af59-6ea1048fa49d" }, - "3182": { + "3183": { "varname": "qts_memory_usage_insecure", "caption": "QTS Memory Usage: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -33224,7 +33235,7 @@ "settings": {}, "uuid": "02f5ccdd-bd59-4cb7-8eb6-7d7c0e60c9fa" }, - "3183": { + "3184": { "varname": "qts_memory_usage_no_perfdata", "caption": "QTS Memory Usage: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -33233,7 +33244,7 @@ "settings": {}, "uuid": "71a1f924-6555-4100-9941-454f1c0b9ed5" }, - "3184": { + "3185": { "varname": "qts_memory_usage_no_proxy", "caption": "QTS Memory Usage: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -33242,7 +33253,7 @@ "settings": {}, "uuid": "6898c73e-5f3c-41cd-8b4a-2efea061ced7" }, - "3185": { + "3186": { "varname": "qts_memory_usage_password", "caption": "QTS Memory Usage: Password", "description": "QTS API password.", @@ -33253,7 +33264,7 @@ }, "uuid": "ce483e47-8fe4-43c6-9bcd-0b1c310a7b32" }, - "3186": { + "3187": { "varname": "qts_memory_usage_proxy", "caption": "QTS Memory Usage: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -33264,7 +33275,7 @@ }, "uuid": "d1dbca9b-46a9-46d1-b56b-2a851e2fe69a" }, - "3187": { + "3188": { "varname": "qts_memory_usage_timeout", "caption": "QTS Memory Usage: Timeout", "description": "Network timeout in seconds.", @@ -33275,7 +33286,7 @@ }, "uuid": "b59ddf1e-8d60-4b33-b054-bb075e27b6a9" }, - "3188": { + "3189": { "varname": "qts_memory_usage_url", "caption": "QTS Memory Usage: URL", "description": "QTS-based appliance URL. Example: `--url=https://192.0.2.10:8080`.", @@ -33286,7 +33297,7 @@ }, "uuid": "fe4c02c9-8d1a-4c62-b83d-cc606c14c87f" }, - "3189": { + "3190": { "varname": "qts_memory_usage_username", "caption": "QTS Memory Usage: Username", "description": "QTS API username.", @@ -33297,7 +33308,7 @@ }, "uuid": "fde3bbfb-bc5c-4dfd-957d-2c095e932964" }, - "3190": { + "3191": { "varname": "qts_memory_usage_warning", "caption": "QTS Memory Usage: Warning", "description": "WARN threshold for memory usage in percent. Supports Nagios ranges.", @@ -33308,7 +33319,7 @@ }, "uuid": "aaa7a6d0-cab3-44b9-9dbd-5145f465f7df" }, - "3191": { + "3192": { "varname": "qts_temperatures_always_ok", "caption": "QTS Temperatures: Always OK?", "description": "Always returns OK.", @@ -33317,7 +33328,7 @@ "settings": {}, "uuid": "2bb13fa0-3b59-4f48-ae31-f267b1a89544" }, - "3192": { + "3193": { "varname": "qts_temperatures_insecure", "caption": "QTS Temperatures: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -33326,7 +33337,7 @@ "settings": {}, "uuid": "b16239bb-672f-453a-a8e4-46336bfeba0d" }, - "3193": { + "3194": { "varname": "qts_temperatures_no_perfdata", "caption": "QTS Temperatures: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -33335,7 +33346,7 @@ "settings": {}, "uuid": "9c77a215-d68b-45fe-bc3a-80ab82e3e645" }, - "3194": { + "3195": { "varname": "qts_temperatures_no_proxy", "caption": "QTS Temperatures: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -33344,7 +33355,7 @@ "settings": {}, "uuid": "74bfcf10-2a8b-4995-b170-406e79b48e4c" }, - "3195": { + "3196": { "varname": "qts_temperatures_password", "caption": "QTS Temperatures: Password", "description": "QTS API password.", @@ -33355,7 +33366,7 @@ }, "uuid": "71cd4039-d7e7-48df-8699-a5de36abbf26" }, - "3196": { + "3197": { "varname": "qts_temperatures_proxy", "caption": "QTS Temperatures: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -33366,7 +33377,7 @@ }, "uuid": "c69b37bb-b683-44c8-8089-7d015f6e48c0" }, - "3197": { + "3198": { "varname": "qts_temperatures_timeout", "caption": "QTS Temperatures: Timeout", "description": "Network timeout in seconds.", @@ -33377,7 +33388,7 @@ }, "uuid": "53b328f3-62cd-4eee-a78d-0a056cd5fe35" }, - "3198": { + "3199": { "varname": "qts_temperatures_url", "caption": "QTS Temperatures: URL", "description": "QTS-based appliance URL. Example: `--url=https://192.0.2.10:8080`.", @@ -33388,7 +33399,7 @@ }, "uuid": "22831b26-0a24-44e0-bd9c-cfccf4737c9d" }, - "3199": { + "3200": { "varname": "qts_temperatures_username", "caption": "QTS Temperatures: Username", "description": "QTS API username.", @@ -33399,7 +33410,7 @@ }, "uuid": "63554a34-f862-4e72-84c1-384f48345225" }, - "3200": { + "3201": { "varname": "qts_uptime_always_ok", "caption": "QTS Uptime: Always OK?", "description": "Always returns OK.", @@ -33408,7 +33419,7 @@ "settings": {}, "uuid": "0a156e7d-f4b8-4dd1-9984-02046d419f4f" }, - "3201": { + "3202": { "varname": "qts_uptime_insecure", "caption": "QTS Uptime: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -33417,7 +33428,7 @@ "settings": {}, "uuid": "920d50d8-170c-48c9-8d24-0b7452062184" }, - "3202": { + "3203": { "varname": "qts_uptime_no_perfdata", "caption": "QTS Uptime: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -33426,7 +33437,7 @@ "settings": {}, "uuid": "5130dfa2-417b-4253-ae6f-527b95c193cd" }, - "3203": { + "3204": { "varname": "qts_uptime_no_proxy", "caption": "QTS Uptime: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -33435,7 +33446,7 @@ "settings": {}, "uuid": "e65e729a-7275-4aed-8dcb-da3949a14e42" }, - "3204": { + "3205": { "varname": "qts_uptime_password", "caption": "QTS Uptime: Password", "description": "QTS API password.", @@ -33446,7 +33457,7 @@ }, "uuid": "7215ca31-9bc6-41cc-9c74-12c840dd3f0c" }, - "3205": { + "3206": { "varname": "qts_uptime_proxy", "caption": "QTS Uptime: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -33457,7 +33468,7 @@ }, "uuid": "85bdadb9-6d7b-46bb-8f2a-60927a9155d9" }, - "3206": { + "3207": { "varname": "qts_uptime_timeout", "caption": "QTS Uptime: Timeout", "description": "Network timeout in seconds.", @@ -33468,7 +33479,7 @@ }, "uuid": "65329a94-cbe8-46b5-b7b3-c5e43d847042" }, - "3207": { + "3208": { "varname": "qts_uptime_url", "caption": "QTS Uptime: URL", "description": "QTS-based appliance URL. Example: `--url=https://192.0.2.10:8080`.", @@ -33479,7 +33490,7 @@ }, "uuid": "aff6dfdc-bb9f-40ad-86aa-0c9ed646702b" }, - "3208": { + "3209": { "varname": "qts_uptime_username", "caption": "QTS Uptime: Username", "description": "QTS API username.", @@ -33490,7 +33501,7 @@ }, "uuid": "32751e9a-5b67-4601-beff-f211f053e455" }, - "3209": { + "3210": { "varname": "qts_version_always_ok", "caption": "QTS Version: Always OK?", "description": "Always returns OK.", @@ -33499,7 +33510,7 @@ "settings": {}, "uuid": "76aa6bdc-8d09-451d-a39d-f0b780fe4a4c" }, - "3210": { + "3211": { "varname": "qts_version_insecure", "caption": "QTS Version: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -33508,7 +33519,7 @@ "settings": {}, "uuid": "6466b3a3-e4c8-40e5-bfbf-92be289eba4f" }, - "3211": { + "3212": { "varname": "qts_version_no_proxy", "caption": "QTS Version: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -33517,7 +33528,7 @@ "settings": {}, "uuid": "c54b5de3-65da-470e-9afd-31dc4f12c063" }, - "3212": { + "3213": { "varname": "qts_version_password", "caption": "QTS Version: Password", "description": "QTS API password.", @@ -33528,7 +33539,7 @@ }, "uuid": "ee114e68-cb3a-42fb-947e-1facb9b7f7b9" }, - "3213": { + "3214": { "varname": "qts_version_proxy", "caption": "QTS Version: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -33539,7 +33550,7 @@ }, "uuid": "102ba377-4581-475e-8d48-4bad05120630" }, - "3214": { + "3215": { "varname": "qts_version_timeout", "caption": "QTS Version: Timeout", "description": "Network timeout in seconds.", @@ -33550,7 +33561,7 @@ }, "uuid": "ca2bf282-8d3e-4d61-9414-180aac3f0c3b" }, - "3215": { + "3216": { "varname": "qts_version_url", "caption": "QTS Version: URL", "description": "QTS-based appliance URL. Example: `--url=https://192.0.2.10:8080`.", @@ -33561,7 +33572,7 @@ }, "uuid": "42216358-787c-4566-8311-711cd864f6aa" }, - "3216": { + "3217": { "varname": "qts_version_username", "caption": "QTS Version: Username", "description": "QTS API username.", @@ -33572,7 +33583,7 @@ }, "uuid": "e2840aaa-a709-4ba0-acf9-2095d897d1e6" }, - "3217": { + "3218": { "varname": "redfish_ethernetinterfaces_always_ok", "caption": "Redfish Ethernetinterfaces: Always OK?", "description": "Always returns OK.", @@ -33581,7 +33592,7 @@ "settings": {}, "uuid": "5d2f0911-1505-4dc4-b91b-edb7d51f9110" }, - "3218": { + "3219": { "varname": "redfish_ethernetinterfaces_brief", "caption": "Redfish Ethernetinterfaces: Brief?", "description": "Hide items that are OK and show only those in WARN/CRIT state. Alerting is unaffected: all items still drive the overall check state.", @@ -33590,7 +33601,7 @@ "settings": {}, "uuid": "6aa4147b-312a-4d16-9830-082438605a46" }, - "3219": { + "3220": { "varname": "redfish_ethernetinterfaces_cache_expire", "caption": "Redfish Ethernetinterfaces: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -33601,7 +33612,7 @@ }, "uuid": "b44bd92e-1e3b-4bd3-8975-62b006c472c5" }, - "3220": { + "3221": { "varname": "redfish_ethernetinterfaces_ignore", "caption": "Redfish Ethernetinterfaces: Ignore", "description": "Ignore items whose name matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times.", @@ -33612,7 +33623,7 @@ }, "uuid": "95b1a8ff-37f3-4a96-a41c-9b54bca8db30" }, - "3221": { + "3222": { "varname": "redfish_ethernetinterfaces_insecure", "caption": "Redfish Ethernetinterfaces: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -33621,7 +33632,7 @@ "settings": {}, "uuid": "d0148bf3-da2f-43c9-ae17-2e39b95ab53f" }, - "3222": { + "3223": { "varname": "redfish_ethernetinterfaces_inventory", "caption": "Redfish Ethernetinterfaces: Inventory?", "description": "Output the parsed components as JSON on stdout and exit OK, instead of running a health check. Use this to collect a hardware inventory: the JSON is a single object keyed by component type, so the output of several Redfish checks can be merged into one inventory document with `jq --slurp`. Ignores --brief, --match and --ignore.", @@ -33630,7 +33641,7 @@ "settings": {}, "uuid": "3ee17983-6ad1-4ed3-951b-74fc2ec2bf31" }, - "3223": { + "3224": { "varname": "redfish_ethernetinterfaces_match", "caption": "Redfish Ethernetinterfaces: Match", "description": "Only check items whose name matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second).", @@ -33641,7 +33652,7 @@ }, "uuid": "baec9dba-32e5-4e3b-a17d-8f0665b58a8c" }, - "3224": { + "3225": { "varname": "redfish_ethernetinterfaces_no_insecure", "caption": "Redfish Ethernetinterfaces: No Insecure?", "description": "Verify the TLS certificate against the system trust store, overriding the insecure default of this check. Use it once the endpoint presents a publicly trusted certificate, or once its CA has been added to the system trust store.", @@ -33650,7 +33661,7 @@ "settings": {}, "uuid": "12b77553-d5d6-4a6d-8e7e-ae9ba7882ed0" }, - "3225": { + "3226": { "varname": "redfish_ethernetinterfaces_no_perfdata", "caption": "Redfish Ethernetinterfaces: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -33659,7 +33670,7 @@ "settings": {}, "uuid": "98f9c1a9-5979-458b-afc0-d9a0fc12e632" }, - "3226": { + "3227": { "varname": "redfish_ethernetinterfaces_no_proxy", "caption": "Redfish Ethernetinterfaces: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -33668,7 +33679,7 @@ "settings": {}, "uuid": "d0561c73-46ae-4aea-b795-59c804b4650c" }, - "3227": { + "3228": { "varname": "redfish_ethernetinterfaces_password", "caption": "Redfish Ethernetinterfaces: Password", "description": "Redfish API password.", @@ -33679,7 +33690,7 @@ }, "uuid": "eda2e078-1bc1-4274-a27c-9f88308d9267" }, - "3228": { + "3229": { "varname": "redfish_ethernetinterfaces_proxy", "caption": "Redfish Ethernetinterfaces: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -33690,7 +33701,7 @@ }, "uuid": "cc2747c3-52b6-4654-8900-983a1ab87d5c" }, - "3229": { + "3230": { "varname": "redfish_ethernetinterfaces_retries", "caption": "Redfish Ethernetinterfaces: Retries", "description": "Number of extra attempts if a request to the Redfish API fails, before the check gives up. Helps against an occasionally slow or flaky management controller.", @@ -33701,7 +33712,7 @@ }, "uuid": "ed265d4a-0c1f-4ee1-b354-3e426c2a3647" }, - "3230": { + "3231": { "varname": "redfish_ethernetinterfaces_timeout", "caption": "Redfish Ethernetinterfaces: Timeout", "description": "Network timeout in seconds.", @@ -33712,7 +33723,7 @@ }, "uuid": "af84eb76-9f5d-451b-a09f-9e1f02c0956c" }, - "3231": { + "3232": { "varname": "redfish_ethernetinterfaces_url", "caption": "Redfish Ethernetinterfaces: URL", "description": "Redfish API URL.", @@ -33723,7 +33734,7 @@ }, "uuid": "648c93a0-ebfd-495b-9803-8567f698cc13" }, - "3232": { + "3233": { "varname": "redfish_ethernetinterfaces_username", "caption": "Redfish Ethernetinterfaces: Username", "description": "Redfish API username.", @@ -33734,7 +33745,7 @@ }, "uuid": "a5e350fb-c3b7-40a0-a59b-ad5aeb2015c5" }, - "3233": { + "3234": { "varname": "redfish_ethernetinterfaces_verbose", "caption": "Redfish Ethernetinterfaces: Verbose?", "description": "Makes this plugin verbose during the operation. Useful for debugging and seeing what is going on under the hood. For this check that also appends every Redfish response it evaluated to its output, ready to be attached to a bug report, and writes a trace of every Redfish request, with timings, to linuxfabrik-monitoring-plugins-redfish-trace.log below the temporary directory. Unlike this check's output, the trace survives a check that the monitoring server terminates for exceeding its timeout, which is what makes it useful against a slow management controller. Passwords and session tokens are kept out of both. The output grows with the responses, so keep this switched on in a service definition only while chasing a problem.", @@ -33743,7 +33754,7 @@ "settings": {}, "uuid": "6de2ee89-9f47-4746-9c66-98d1d959bcc4" }, - "3234": { + "3235": { "varname": "redfish_firmwareinventory_always_ok", "caption": "Redfish Firmwareinventory: Always OK?", "description": "Always returns OK.", @@ -33752,7 +33763,7 @@ "settings": {}, "uuid": "4d1f2a3e-3929-4fb7-b1f1-a2f8221d44d1" }, - "3235": { + "3236": { "varname": "redfish_firmwareinventory_brief", "caption": "Redfish Firmwareinventory: Brief?", "description": "Hide items that are OK and show only those in WARN/CRIT state. Alerting is unaffected: all items still drive the overall check state.", @@ -33761,7 +33772,7 @@ "settings": {}, "uuid": "0e2e742f-6203-4fd6-99f0-0592c033fe57" }, - "3236": { + "3237": { "varname": "redfish_firmwareinventory_cache_expire", "caption": "Redfish Firmwareinventory: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -33772,7 +33783,7 @@ }, "uuid": "3cef3f11-e1d1-4220-b60f-0c5879971fe0" }, - "3237": { + "3238": { "varname": "redfish_firmwareinventory_ignore", "caption": "Redfish Firmwareinventory: Ignore", "description": "Ignore items whose name matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times.", @@ -33783,7 +33794,7 @@ }, "uuid": "7bcb54f0-7199-42f6-a5bc-0a8903e15c2f" }, - "3238": { + "3239": { "varname": "redfish_firmwareinventory_insecure", "caption": "Redfish Firmwareinventory: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -33792,7 +33803,7 @@ "settings": {}, "uuid": "8d2c2efa-b8ed-459d-ba61-80a3473ed67f" }, - "3239": { + "3240": { "varname": "redfish_firmwareinventory_inventory", "caption": "Redfish Firmwareinventory: Inventory?", "description": "Output the parsed components as JSON on stdout and exit OK, instead of running a health check. Use this to collect a hardware inventory: the JSON is a single object keyed by component type, so the output of several Redfish checks can be merged into one inventory document with `jq --slurp`. Ignores --brief, --match and --ignore.", @@ -33801,7 +33812,7 @@ "settings": {}, "uuid": "3678244a-d14f-4569-888f-b670651a877a" }, - "3240": { + "3241": { "varname": "redfish_firmwareinventory_match", "caption": "Redfish Firmwareinventory: Match", "description": "Only check items whose name matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second).", @@ -33812,7 +33823,7 @@ }, "uuid": "fcc630b2-6e2b-4aec-bd35-845f98786e14" }, - "3241": { + "3242": { "varname": "redfish_firmwareinventory_no_insecure", "caption": "Redfish Firmwareinventory: No Insecure?", "description": "Verify the TLS certificate against the system trust store, overriding the insecure default of this check. Use it once the endpoint presents a publicly trusted certificate, or once its CA has been added to the system trust store.", @@ -33821,7 +33832,7 @@ "settings": {}, "uuid": "ba6f5e11-0c46-41a1-a0ec-ef8d096ec8c6" }, - "3242": { + "3243": { "varname": "redfish_firmwareinventory_no_perfdata", "caption": "Redfish Firmwareinventory: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -33830,7 +33841,7 @@ "settings": {}, "uuid": "32080db6-b5b7-4686-8502-fd78dbcc541e" }, - "3243": { + "3244": { "varname": "redfish_firmwareinventory_no_proxy", "caption": "Redfish Firmwareinventory: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -33839,7 +33850,7 @@ "settings": {}, "uuid": "2cfbfaf3-4df8-463f-aab7-15628673e100" }, - "3244": { + "3245": { "varname": "redfish_firmwareinventory_password", "caption": "Redfish Firmwareinventory: Password", "description": "Redfish API password.", @@ -33850,7 +33861,7 @@ }, "uuid": "003306d8-d47a-4737-93aa-bd2f1551912d" }, - "3245": { + "3246": { "varname": "redfish_firmwareinventory_proxy", "caption": "Redfish Firmwareinventory: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -33861,7 +33872,7 @@ }, "uuid": "abaf0284-5ba8-4a4c-839e-713899848088" }, - "3246": { + "3247": { "varname": "redfish_firmwareinventory_retries", "caption": "Redfish Firmwareinventory: Retries", "description": "Number of extra attempts if a request to the Redfish API fails, before the check gives up. Helps against an occasionally slow or flaky management controller.", @@ -33872,7 +33883,7 @@ }, "uuid": "e8e93777-a0a7-4dc5-9f0b-c68a648f96d7" }, - "3247": { + "3248": { "varname": "redfish_firmwareinventory_timeout", "caption": "Redfish Firmwareinventory: Timeout", "description": "Network timeout in seconds.", @@ -33883,7 +33894,7 @@ }, "uuid": "b8baae2d-fbeb-4bd1-b6a8-15a0ae407c6d" }, - "3248": { + "3249": { "varname": "redfish_firmwareinventory_url", "caption": "Redfish Firmwareinventory: URL", "description": "Redfish API URL.", @@ -33894,7 +33905,7 @@ }, "uuid": "ba6a6764-c7f4-4df3-8428-cd3e86ad190d" }, - "3249": { + "3250": { "varname": "redfish_firmwareinventory_username", "caption": "Redfish Firmwareinventory: Username", "description": "Redfish API username.", @@ -33905,7 +33916,7 @@ }, "uuid": "663e4199-9abc-4273-b161-05dd7f40e4c6" }, - "3250": { + "3251": { "varname": "redfish_firmwareinventory_verbose", "caption": "Redfish Firmwareinventory: Verbose?", "description": "Makes this plugin verbose during the operation. Useful for debugging and seeing what is going on under the hood. For this check that also appends every Redfish response it evaluated to its output, ready to be attached to a bug report, and writes a trace of every Redfish request, with timings, to linuxfabrik-monitoring-plugins-redfish-trace.log below the temporary directory. Unlike this check's output, the trace survives a check that the monitoring server terminates for exceeding its timeout, which is what makes it useful against a slow management controller. Passwords and session tokens are kept out of both. The output grows with the responses, so keep this switched on in a service definition only while chasing a problem.", @@ -33914,7 +33925,7 @@ "settings": {}, "uuid": "002b7b26-72ae-4b8b-9147-57bb5802c160" }, - "3251": { + "3252": { "varname": "redfish_logservices_always_ok", "caption": "Redfish Logservices: Always OK?", "description": "Always returns OK.", @@ -33923,7 +33934,7 @@ "settings": {}, "uuid": "9dc645f6-bf54-4f6b-aeb5-adf7e4ed71f7" }, - "3252": { + "3253": { "varname": "redfish_logservices_cache_expire", "caption": "Redfish Logservices: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -33934,7 +33945,7 @@ }, "uuid": "7b3e6d49-eafa-4186-bffa-04e3e000309e" }, - "3253": { + "3254": { "varname": "redfish_logservices_ignore", "caption": "Redfish Logservices: Ignore", "description": "Ignore log entries whose message matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. Example: `--ignore=\"Log area reset/cleared\"`.", @@ -33945,7 +33956,7 @@ }, "uuid": "0f067a4f-995b-43d6-9d2a-84f89d32e7dc" }, - "3254": { + "3255": { "varname": "redfish_logservices_insecure", "caption": "Redfish Logservices: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -33954,7 +33965,7 @@ "settings": {}, "uuid": "65e6a027-057f-4db2-a02d-1d62dc740ca9" }, - "3255": { + "3256": { "varname": "redfish_logservices_log_type", "caption": "Redfish Logservices: Log Type", "description": "Which log to read: `sel` (System Event Log, default), `mel` (management controller event log) or `both`.", @@ -33967,7 +33978,7 @@ }, "uuid": "dd096293-575f-41fc-876b-d7fd194ccde0" }, - "3256": { + "3257": { "varname": "redfish_logservices_match", "caption": "Redfish Logservices: Match", "description": "Only consider log entries whose message matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Example: `--match=\"(?i)temperature\"`.", @@ -33978,7 +33989,7 @@ }, "uuid": "f50237b7-e9cb-46c2-9618-77646c59001a" }, - "3257": { + "3258": { "varname": "redfish_logservices_max_age", "caption": "Redfish Logservices: Max Age", "description": "Age out log entries older than this many days: they are no longer alerted on, only counted in the summary. A controller keeps an entry until the log is cleared, so a long-since resolved event would otherwise keep the check in a non-OK state forever.", @@ -33989,7 +34000,7 @@ }, "uuid": "b6c45fc8-5096-4ac0-8cde-e8527f197736" }, - "3258": { + "3259": { "varname": "redfish_logservices_no_insecure", "caption": "Redfish Logservices: No Insecure?", "description": "Verify the TLS certificate against the system trust store, overriding the insecure default of this check. Use it once the endpoint presents a publicly trusted certificate, or once its CA has been added to the system trust store.", @@ -33998,7 +34009,7 @@ "settings": {}, "uuid": "8b16b42f-3e3d-4309-8dc7-4b974ba5ee33" }, - "3259": { + "3260": { "varname": "redfish_logservices_no_perfdata", "caption": "Redfish Logservices: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -34007,7 +34018,7 @@ "settings": {}, "uuid": "f3882cdd-86db-4326-8129-32e3bff324b2" }, - "3260": { + "3261": { "varname": "redfish_logservices_no_proxy", "caption": "Redfish Logservices: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -34016,7 +34027,7 @@ "settings": {}, "uuid": "5e425606-47a0-452d-acbf-2c5ea3d1198b" }, - "3261": { + "3262": { "varname": "redfish_logservices_password", "caption": "Redfish Logservices: Password", "description": "Redfish API password.", @@ -34027,7 +34038,7 @@ }, "uuid": "826845c8-1e94-447b-a677-b6348aab23df" }, - "3262": { + "3263": { "varname": "redfish_logservices_proxy", "caption": "Redfish Logservices: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -34038,7 +34049,7 @@ }, "uuid": "2cfcc9b3-cd78-4c44-9f81-094cd0acf4fa" }, - "3263": { + "3264": { "varname": "redfish_logservices_retries", "caption": "Redfish Logservices: Retries", "description": "Number of extra attempts if a request to the Redfish API fails, before the check gives up. Helps against an occasionally slow or flaky management controller.", @@ -34049,7 +34060,7 @@ }, "uuid": "41853167-e12a-439d-ba3e-d05201470dde" }, - "3264": { + "3265": { "varname": "redfish_logservices_timeout", "caption": "Redfish Logservices: Timeout", "description": "Network timeout in seconds.", @@ -34060,7 +34071,7 @@ }, "uuid": "f8b6aaaf-a0d9-4f35-8ae3-9562431cb6c1" }, - "3265": { + "3266": { "varname": "redfish_logservices_url", "caption": "Redfish Logservices: URL", "description": "Redfish API URL.", @@ -34071,7 +34082,7 @@ }, "uuid": "c6273264-ce5c-4373-89b4-27048978c4bc" }, - "3266": { + "3267": { "varname": "redfish_logservices_username", "caption": "Redfish Logservices: Username", "description": "Redfish API username.", @@ -34082,7 +34093,7 @@ }, "uuid": "a1d4f78f-80eb-432b-a943-27fb1edc8b30" }, - "3267": { + "3268": { "varname": "redfish_logservices_verbose", "caption": "Redfish Logservices: Verbose?", "description": "Makes this plugin verbose during the operation. Useful for debugging and seeing what is going on under the hood. For this check that also appends every Redfish response it evaluated to its output, ready to be attached to a bug report, and writes a trace of every Redfish request, with timings, to linuxfabrik-monitoring-plugins-redfish-trace.log below the temporary directory. Unlike this check's output, the trace survives a check that the monitoring server terminates for exceeding its timeout, which is what makes it useful against a slow management controller. Passwords and session tokens are kept out of both. The output grows with the responses, so keep this switched on in a service definition only while chasing a problem.", @@ -34091,7 +34102,7 @@ "settings": {}, "uuid": "8196f30a-ed21-4ded-b3f5-ecfbdd2628d3" }, - "3268": { + "3269": { "varname": "redfish_managers_always_ok", "caption": "Redfish Managers: Always OK?", "description": "Always returns OK.", @@ -34100,7 +34111,7 @@ "settings": {}, "uuid": "9e2f7d6a-b26b-4998-98c5-a50df5caebe9" }, - "3269": { + "3270": { "varname": "redfish_managers_cache_expire", "caption": "Redfish Managers: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -34111,7 +34122,7 @@ }, "uuid": "268c7b4e-3c13-4b06-90c1-9e367ece6dae" }, - "3270": { + "3271": { "varname": "redfish_managers_ignore", "caption": "Redfish Managers: Ignore", "description": "Ignore items whose name matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times.", @@ -34122,7 +34133,7 @@ }, "uuid": "10389a19-f00a-43c1-9562-cdbbe660d257" }, - "3271": { + "3272": { "varname": "redfish_managers_insecure", "caption": "Redfish Managers: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -34131,7 +34142,7 @@ "settings": {}, "uuid": "324a1c28-cbc9-4e2f-8e87-ed4de7210b3c" }, - "3272": { + "3273": { "varname": "redfish_managers_inventory", "caption": "Redfish Managers: Inventory?", "description": "Output the parsed components as JSON on stdout and exit OK, instead of running a health check. Use this to collect a hardware inventory: the JSON is a single object keyed by component type, so the output of several Redfish checks can be merged into one inventory document with `jq --slurp`. Ignores --brief, --match and --ignore.", @@ -34140,7 +34151,7 @@ "settings": {}, "uuid": "4fbf1dc4-2dce-4d22-9c80-a560c2d8a883" }, - "3273": { + "3274": { "varname": "redfish_managers_match", "caption": "Redfish Managers: Match", "description": "Only check items whose name matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second).", @@ -34151,7 +34162,7 @@ }, "uuid": "f6be010c-43ab-4093-b59c-d3c4aec2f772" }, - "3274": { + "3275": { "varname": "redfish_managers_no_insecure", "caption": "Redfish Managers: No Insecure?", "description": "Verify the TLS certificate against the system trust store, overriding the insecure default of this check. Use it once the endpoint presents a publicly trusted certificate, or once its CA has been added to the system trust store.", @@ -34160,7 +34171,7 @@ "settings": {}, "uuid": "59afb54d-87b4-47d2-887f-c891aa936d99" }, - "3275": { + "3276": { "varname": "redfish_managers_no_perfdata", "caption": "Redfish Managers: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -34169,7 +34180,7 @@ "settings": {}, "uuid": "09ef560d-d2ae-4379-9ba4-7e38279ac38f" }, - "3276": { + "3277": { "varname": "redfish_managers_no_proxy", "caption": "Redfish Managers: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -34178,7 +34189,7 @@ "settings": {}, "uuid": "5c686a2d-cfea-42b4-bdfd-fad2447a88cb" }, - "3277": { + "3278": { "varname": "redfish_managers_password", "caption": "Redfish Managers: Password", "description": "Redfish API password.", @@ -34189,7 +34200,7 @@ }, "uuid": "a73c4a83-ca44-4d82-afe7-3a4f9c808f38" }, - "3278": { + "3279": { "varname": "redfish_managers_proxy", "caption": "Redfish Managers: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -34200,7 +34211,7 @@ }, "uuid": "60f94439-b057-4fd9-888f-d39c63e7fb10" }, - "3279": { + "3280": { "varname": "redfish_managers_retries", "caption": "Redfish Managers: Retries", "description": "Number of extra attempts if a request to the Redfish API fails, before the check gives up. Helps against an occasionally slow or flaky management controller.", @@ -34211,7 +34222,7 @@ }, "uuid": "ab07c64d-0aed-4f60-9752-7bd3d83457eb" }, - "3280": { + "3281": { "varname": "redfish_managers_timeout", "caption": "Redfish Managers: Timeout", "description": "Network timeout in seconds.", @@ -34222,7 +34233,7 @@ }, "uuid": "aaf8b017-7bdd-465e-9bda-b4ac57802f85" }, - "3281": { + "3282": { "varname": "redfish_managers_url", "caption": "Redfish Managers: URL", "description": "Redfish API URL.", @@ -34233,7 +34244,7 @@ }, "uuid": "70b0b19e-daf9-43c8-b58c-97e60cfa465f" }, - "3282": { + "3283": { "varname": "redfish_managers_username", "caption": "Redfish Managers: Username", "description": "Redfish API username.", @@ -34244,7 +34255,7 @@ }, "uuid": "a5f2bd30-c0f0-41bb-add1-6da96514dd7d" }, - "3283": { + "3284": { "varname": "redfish_managers_verbose", "caption": "Redfish Managers: Verbose?", "description": "Makes this plugin verbose during the operation. Useful for debugging and seeing what is going on under the hood. For this check that also appends every Redfish response it evaluated to its output, ready to be attached to a bug report, and writes a trace of every Redfish request, with timings, to linuxfabrik-monitoring-plugins-redfish-trace.log below the temporary directory. Unlike this check's output, the trace survives a check that the monitoring server terminates for exceeding its timeout, which is what makes it useful against a slow management controller. Passwords and session tokens are kept out of both. The output grows with the responses, so keep this switched on in a service definition only while chasing a problem.", @@ -34253,7 +34264,7 @@ "settings": {}, "uuid": "c466b2ca-3f1a-461a-affd-8b06225abf78" }, - "3284": { + "3285": { "varname": "redfish_memory_always_ok", "caption": "Redfish Memory: Always OK?", "description": "Always returns OK.", @@ -34262,7 +34273,7 @@ "settings": {}, "uuid": "b9164173-78b2-42b5-aa32-725d6572d3db" }, - "3285": { + "3286": { "varname": "redfish_memory_brief", "caption": "Redfish Memory: Brief?", "description": "Hide items that are OK and show only those in WARN/CRIT state. Alerting is unaffected: all items still drive the overall check state.", @@ -34271,7 +34282,7 @@ "settings": {}, "uuid": "7b9a48d0-2b58-418f-966e-96664209b028" }, - "3286": { + "3287": { "varname": "redfish_memory_cache_expire", "caption": "Redfish Memory: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -34282,7 +34293,7 @@ }, "uuid": "434112ef-954e-4c64-9175-697f6a31c32d" }, - "3287": { + "3288": { "varname": "redfish_memory_ignore", "caption": "Redfish Memory: Ignore", "description": "Ignore items whose name matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times.", @@ -34293,7 +34304,7 @@ }, "uuid": "7c0063e8-cd53-4e15-9fbd-68a544fa03e8" }, - "3288": { + "3289": { "varname": "redfish_memory_insecure", "caption": "Redfish Memory: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -34302,7 +34313,7 @@ "settings": {}, "uuid": "b5e650b2-a535-4217-829d-63de429bfa3d" }, - "3289": { + "3290": { "varname": "redfish_memory_inventory", "caption": "Redfish Memory: Inventory?", "description": "Output the parsed components as JSON on stdout and exit OK, instead of running a health check. Use this to collect a hardware inventory: the JSON is a single object keyed by component type, so the output of several Redfish checks can be merged into one inventory document with `jq --slurp`. Ignores --brief, --match and --ignore.", @@ -34311,7 +34322,7 @@ "settings": {}, "uuid": "748afb9d-90fc-47e6-938e-aea83b16b273" }, - "3290": { + "3291": { "varname": "redfish_memory_match", "caption": "Redfish Memory: Match", "description": "Only check items whose name matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second).", @@ -34322,7 +34333,7 @@ }, "uuid": "f9c486a6-ff85-43ee-a987-39a7ae9db8ae" }, - "3291": { + "3292": { "varname": "redfish_memory_no_insecure", "caption": "Redfish Memory: No Insecure?", "description": "Verify the TLS certificate against the system trust store, overriding the insecure default of this check. Use it once the endpoint presents a publicly trusted certificate, or once its CA has been added to the system trust store.", @@ -34331,7 +34342,7 @@ "settings": {}, "uuid": "7085aa1b-65a9-44ae-ac43-eb1e28e11410" }, - "3292": { + "3293": { "varname": "redfish_memory_no_perfdata", "caption": "Redfish Memory: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -34340,7 +34351,7 @@ "settings": {}, "uuid": "05760c81-630b-4e65-8b08-41423389f44d" }, - "3293": { + "3294": { "varname": "redfish_memory_no_proxy", "caption": "Redfish Memory: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -34349,7 +34360,7 @@ "settings": {}, "uuid": "3a574e46-fb17-421f-a501-8a49196c2a68" }, - "3294": { + "3295": { "varname": "redfish_memory_password", "caption": "Redfish Memory: Password", "description": "Redfish API password.", @@ -34360,7 +34371,7 @@ }, "uuid": "92e8bcf5-05b4-4695-becf-52c896c622ad" }, - "3295": { + "3296": { "varname": "redfish_memory_proxy", "caption": "Redfish Memory: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -34371,7 +34382,7 @@ }, "uuid": "d1e196e9-4400-42b2-868e-950471ac70bf" }, - "3296": { + "3297": { "varname": "redfish_memory_retries", "caption": "Redfish Memory: Retries", "description": "Number of extra attempts if a request to the Redfish API fails, before the check gives up. Helps against an occasionally slow or flaky management controller.", @@ -34382,7 +34393,7 @@ }, "uuid": "963aa7ba-7811-4724-b6ed-0ba84d921661" }, - "3297": { + "3298": { "varname": "redfish_memory_timeout", "caption": "Redfish Memory: Timeout", "description": "Network timeout in seconds.", @@ -34393,7 +34404,7 @@ }, "uuid": "a51f4d4d-c700-4cb3-84d8-d4ae04cae54e" }, - "3298": { + "3299": { "varname": "redfish_memory_url", "caption": "Redfish Memory: URL", "description": "Redfish API URL.", @@ -34404,7 +34415,7 @@ }, "uuid": "07749e4d-2139-48ad-a6ee-cf4dedbd8143" }, - "3299": { + "3300": { "varname": "redfish_memory_username", "caption": "Redfish Memory: Username", "description": "Redfish API username.", @@ -34415,7 +34426,7 @@ }, "uuid": "9f4113b6-1c1a-4b5b-aebe-5b9a70f90aae" }, - "3300": { + "3301": { "varname": "redfish_memory_verbose", "caption": "Redfish Memory: Verbose?", "description": "Makes this plugin verbose during the operation. Useful for debugging and seeing what is going on under the hood. For this check that also appends every Redfish response it evaluated to its output, ready to be attached to a bug report, and writes a trace of every Redfish request, with timings, to linuxfabrik-monitoring-plugins-redfish-trace.log below the temporary directory. Unlike this check's output, the trace survives a check that the monitoring server terminates for exceeding its timeout, which is what makes it useful against a slow management controller. Passwords and session tokens are kept out of both. The output grows with the responses, so keep this switched on in a service definition only while chasing a problem.", @@ -34424,7 +34435,7 @@ "settings": {}, "uuid": "57b8e2fa-2eea-40a9-bb28-b44ce17d5d33" }, - "3301": { + "3302": { "varname": "redfish_processors_always_ok", "caption": "Redfish Processors: Always OK?", "description": "Always returns OK.", @@ -34433,7 +34444,7 @@ "settings": {}, "uuid": "82eed2f0-ef2a-4d85-afbd-f6873880ac02" }, - "3302": { + "3303": { "varname": "redfish_processors_brief", "caption": "Redfish Processors: Brief?", "description": "Hide items that are OK and show only those in WARN/CRIT state. Alerting is unaffected: all items still drive the overall check state.", @@ -34442,7 +34453,7 @@ "settings": {}, "uuid": "9b1ba85d-c043-4495-9511-8c62ee8f6ac6" }, - "3303": { + "3304": { "varname": "redfish_processors_cache_expire", "caption": "Redfish Processors: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -34453,7 +34464,7 @@ }, "uuid": "700f591c-f0c0-41af-8fd1-4c8931963ee3" }, - "3304": { + "3305": { "varname": "redfish_processors_ignore", "caption": "Redfish Processors: Ignore", "description": "Ignore items whose name matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times.", @@ -34464,7 +34475,7 @@ }, "uuid": "e4214bdb-de6e-4713-b2fe-f6d97e50e88b" }, - "3305": { + "3306": { "varname": "redfish_processors_insecure", "caption": "Redfish Processors: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -34473,7 +34484,7 @@ "settings": {}, "uuid": "0e4206e2-27ce-4cd6-b15d-b4d55c134d17" }, - "3306": { + "3307": { "varname": "redfish_processors_inventory", "caption": "Redfish Processors: Inventory?", "description": "Output the parsed components as JSON on stdout and exit OK, instead of running a health check. Use this to collect a hardware inventory: the JSON is a single object keyed by component type, so the output of several Redfish checks can be merged into one inventory document with `jq --slurp`. Ignores --brief, --match and --ignore.", @@ -34482,7 +34493,7 @@ "settings": {}, "uuid": "e8664a09-4d8e-460b-b276-f90c750b5481" }, - "3307": { + "3308": { "varname": "redfish_processors_match", "caption": "Redfish Processors: Match", "description": "Only check items whose name matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second).", @@ -34493,7 +34504,7 @@ }, "uuid": "2194f56b-cb9a-4bfb-b646-f45c8115fc65" }, - "3308": { + "3309": { "varname": "redfish_processors_no_insecure", "caption": "Redfish Processors: No Insecure?", "description": "Verify the TLS certificate against the system trust store, overriding the insecure default of this check. Use it once the endpoint presents a publicly trusted certificate, or once its CA has been added to the system trust store.", @@ -34502,7 +34513,7 @@ "settings": {}, "uuid": "0f3c2358-a3fd-489a-a196-8caaa157c719" }, - "3309": { + "3310": { "varname": "redfish_processors_no_perfdata", "caption": "Redfish Processors: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -34511,7 +34522,7 @@ "settings": {}, "uuid": "7de72c06-772b-4875-ac1d-57c7ec6f3b65" }, - "3310": { + "3311": { "varname": "redfish_processors_no_proxy", "caption": "Redfish Processors: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -34520,7 +34531,7 @@ "settings": {}, "uuid": "f84034ba-e7f1-4af7-981e-eb31d57581f9" }, - "3311": { + "3312": { "varname": "redfish_processors_password", "caption": "Redfish Processors: Password", "description": "Redfish API password.", @@ -34531,7 +34542,7 @@ }, "uuid": "89eb649f-2fb0-43f2-b2f0-378dd771c103" }, - "3312": { + "3313": { "varname": "redfish_processors_proxy", "caption": "Redfish Processors: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -34542,7 +34553,7 @@ }, "uuid": "e081f673-bfeb-4fb6-989e-eee6460c5acb" }, - "3313": { + "3314": { "varname": "redfish_processors_retries", "caption": "Redfish Processors: Retries", "description": "Number of extra attempts if a request to the Redfish API fails, before the check gives up. Helps against an occasionally slow or flaky management controller.", @@ -34553,7 +34564,7 @@ }, "uuid": "522be7bf-caf9-4693-a24b-91e5da46dafe" }, - "3314": { + "3315": { "varname": "redfish_processors_timeout", "caption": "Redfish Processors: Timeout", "description": "Network timeout in seconds.", @@ -34564,7 +34575,7 @@ }, "uuid": "c059afba-0462-48cb-9f41-c5213fb31c5a" }, - "3315": { + "3316": { "varname": "redfish_processors_url", "caption": "Redfish Processors: URL", "description": "Redfish API URL.", @@ -34575,7 +34586,7 @@ }, "uuid": "b8819efb-b690-4bde-90a4-025603d4d930" }, - "3316": { + "3317": { "varname": "redfish_processors_username", "caption": "Redfish Processors: Username", "description": "Redfish API username.", @@ -34586,7 +34597,7 @@ }, "uuid": "31f11d3e-3b1c-44d9-be96-5448a614cf77" }, - "3317": { + "3318": { "varname": "redfish_processors_verbose", "caption": "Redfish Processors: Verbose?", "description": "Makes this plugin verbose during the operation. Useful for debugging and seeing what is going on under the hood. For this check that also appends every Redfish response it evaluated to its output, ready to be attached to a bug report, and writes a trace of every Redfish request, with timings, to linuxfabrik-monitoring-plugins-redfish-trace.log below the temporary directory. Unlike this check's output, the trace survives a check that the monitoring server terminates for exceeding its timeout, which is what makes it useful against a slow management controller. Passwords and session tokens are kept out of both. The output grows with the responses, so keep this switched on in a service definition only while chasing a problem.", @@ -34595,7 +34606,7 @@ "settings": {}, "uuid": "044c0346-b026-4cbd-9d4d-5497ffbd95b7" }, - "3318": { + "3319": { "varname": "redfish_sensors_always_ok", "caption": "Redfish Sensors: Always OK?", "description": "Always returns OK.", @@ -34604,7 +34615,7 @@ "settings": {}, "uuid": "cf7accbb-2f2b-495a-9197-4852cb3aa601" }, - "3319": { + "3320": { "varname": "redfish_sensors_brief", "caption": "Redfish Sensors: Brief?", "description": "Hide items that are OK and show only those in WARN/CRIT state. Alerting is unaffected: all items still drive the overall check state.", @@ -34613,7 +34624,7 @@ "settings": {}, "uuid": "79b78cc5-23b7-4393-bae6-9b1a3ee7bf8a" }, - "3320": { + "3321": { "varname": "redfish_sensors_cache_expire", "caption": "Redfish Sensors: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -34624,7 +34635,7 @@ }, "uuid": "3c6578d6-a90a-4130-91a7-52c56440c240" }, - "3321": { + "3322": { "varname": "redfish_sensors_ignore", "caption": "Redfish Sensors: Ignore", "description": "Ignore items whose name matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times.", @@ -34635,7 +34646,7 @@ }, "uuid": "a49b8c05-3553-4e2c-97aa-17f320031d46" }, - "3322": { + "3323": { "varname": "redfish_sensors_insecure", "caption": "Redfish Sensors: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -34644,7 +34655,7 @@ "settings": {}, "uuid": "8dd888af-1cfe-48cd-a3ca-e8040ee1bf2f" }, - "3323": { + "3324": { "varname": "redfish_sensors_inventory", "caption": "Redfish Sensors: Inventory?", "description": "Output the parsed components as JSON on stdout and exit OK, instead of running a health check. Use this to collect a hardware inventory: the JSON is a single object keyed by component type, so the output of several Redfish checks can be merged into one inventory document with `jq --slurp`. Ignores --brief, --match and --ignore.", @@ -34653,7 +34664,7 @@ "settings": {}, "uuid": "621b0121-e422-4136-a631-67cd4c16b142" }, - "3324": { + "3325": { "varname": "redfish_sensors_match", "caption": "Redfish Sensors: Match", "description": "Only check items whose name matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second).", @@ -34664,7 +34675,7 @@ }, "uuid": "a1d4b3a7-7c58-4ff4-99b5-711e81982f5c" }, - "3325": { + "3326": { "varname": "redfish_sensors_no_insecure", "caption": "Redfish Sensors: No Insecure?", "description": "Verify the TLS certificate against the system trust store, overriding the insecure default of this check. Use it once the endpoint presents a publicly trusted certificate, or once its CA has been added to the system trust store.", @@ -34673,7 +34684,7 @@ "settings": {}, "uuid": "f6553a22-ade7-43f6-8d5a-47db738c9bbb" }, - "3326": { + "3327": { "varname": "redfish_sensors_no_perfdata", "caption": "Redfish Sensors: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -34682,7 +34693,7 @@ "settings": {}, "uuid": "1b34b5af-f1b7-4312-a52e-a2c6ace42a76" }, - "3327": { + "3328": { "varname": "redfish_sensors_no_proxy", "caption": "Redfish Sensors: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -34691,7 +34702,7 @@ "settings": {}, "uuid": "1aabcbc7-3f45-4359-a9a8-93273888fea6" }, - "3328": { + "3329": { "varname": "redfish_sensors_password", "caption": "Redfish Sensors: Password", "description": "Redfish API password.", @@ -34702,7 +34713,7 @@ }, "uuid": "b2e57e6e-3e8d-4881-a90d-667a6f5b885f" }, - "3329": { + "3330": { "varname": "redfish_sensors_proxy", "caption": "Redfish Sensors: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -34713,7 +34724,7 @@ }, "uuid": "321ab7bc-2731-4560-95d3-e31d43fb8fd3" }, - "3330": { + "3331": { "varname": "redfish_sensors_retries", "caption": "Redfish Sensors: Retries", "description": "Number of extra attempts if a request to the Redfish API fails, before the check gives up. Helps against an occasionally slow or flaky management controller.", @@ -34724,7 +34735,7 @@ }, "uuid": "45a174fe-ec73-486b-a531-8caab030d9c2" }, - "3331": { + "3332": { "varname": "redfish_sensors_timeout", "caption": "Redfish Sensors: Timeout", "description": "Network timeout in seconds.", @@ -34735,7 +34746,7 @@ }, "uuid": "177a3150-bab7-4dac-82d5-f29b6c15be87" }, - "3332": { + "3333": { "varname": "redfish_sensors_url", "caption": "Redfish Sensors: URL", "description": "Redfish API URL.", @@ -34746,7 +34757,7 @@ }, "uuid": "081877df-622b-4c93-998b-398d394f8527" }, - "3333": { + "3334": { "varname": "redfish_sensors_username", "caption": "Redfish Sensors: Username", "description": "Redfish API username.", @@ -34757,7 +34768,7 @@ }, "uuid": "c34296a7-23b9-43d8-b87c-fc6d013d1e00" }, - "3334": { + "3335": { "varname": "redfish_sensors_verbose", "caption": "Redfish Sensors: Verbose?", "description": "Makes this plugin verbose during the operation. Useful for debugging and seeing what is going on under the hood. For this check that also appends every Redfish response it evaluated to its output, ready to be attached to a bug report, and writes a trace of every Redfish request, with timings, to linuxfabrik-monitoring-plugins-redfish-trace.log below the temporary directory. Unlike this check's output, the trace survives a check that the monitoring server terminates for exceeding its timeout, which is what makes it useful against a slow management controller. Passwords and session tokens are kept out of both. The output grows with the responses, so keep this switched on in a service definition only while chasing a problem.", @@ -34766,7 +34777,7 @@ "settings": {}, "uuid": "f3be6560-c8c4-4951-af16-9b1769b205b2" }, - "3335": { + "3336": { "varname": "redfish_storage_always_ok", "caption": "Redfish Storage: Always OK?", "description": "Always returns OK.", @@ -34775,7 +34786,7 @@ "settings": {}, "uuid": "86f500da-cbff-478b-8c3b-49ce71ebc5b5" }, - "3336": { + "3337": { "varname": "redfish_storage_brief", "caption": "Redfish Storage: Brief?", "description": "Hide items that are OK and show only those in WARN/CRIT state. Alerting is unaffected: all items still drive the overall check state.", @@ -34784,7 +34795,7 @@ "settings": {}, "uuid": "693f4b61-f32d-44d4-b620-5f96f5f31e37" }, - "3337": { + "3338": { "varname": "redfish_storage_cache_expire", "caption": "Redfish Storage: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -34795,7 +34806,7 @@ }, "uuid": "00748b5f-da3a-41bb-bad8-cc58ceb397c0" }, - "3338": { + "3339": { "varname": "redfish_storage_ignore", "caption": "Redfish Storage: Ignore", "description": "Ignore items whose name matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times.", @@ -34806,7 +34817,7 @@ }, "uuid": "a4691c5e-534a-48e8-b8fe-3749f5cbebb4" }, - "3339": { + "3340": { "varname": "redfish_storage_insecure", "caption": "Redfish Storage: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -34815,7 +34826,7 @@ "settings": {}, "uuid": "70c21dbe-0a34-4f13-acf4-014a9da8e745" }, - "3340": { + "3341": { "varname": "redfish_storage_inventory", "caption": "Redfish Storage: Inventory?", "description": "Output the parsed components as JSON on stdout and exit OK, instead of running a health check. Use this to collect a hardware inventory: the JSON is a single object keyed by component type, so the output of several Redfish checks can be merged into one inventory document with `jq --slurp`. Ignores --brief, --match and --ignore.", @@ -34824,7 +34835,7 @@ "settings": {}, "uuid": "b5086c31-042c-41c9-8134-b623d6eeb367" }, - "3341": { + "3342": { "varname": "redfish_storage_match", "caption": "Redfish Storage: Match", "description": "Only check items whose name matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second).", @@ -34835,7 +34846,7 @@ }, "uuid": "0a8d8484-6df4-4f57-8d9d-9455f19c9ffd" }, - "3342": { + "3343": { "varname": "redfish_storage_no_insecure", "caption": "Redfish Storage: No Insecure?", "description": "Verify the TLS certificate against the system trust store, overriding the insecure default of this check. Use it once the endpoint presents a publicly trusted certificate, or once its CA has been added to the system trust store.", @@ -34844,7 +34855,7 @@ "settings": {}, "uuid": "16b868a4-cdc2-41fe-ba0b-0a7fef7de90d" }, - "3343": { + "3344": { "varname": "redfish_storage_no_perfdata", "caption": "Redfish Storage: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -34853,7 +34864,7 @@ "settings": {}, "uuid": "75a99bf3-cd02-4976-b3c8-85224b1544dc" }, - "3344": { + "3345": { "varname": "redfish_storage_no_proxy", "caption": "Redfish Storage: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -34862,7 +34873,7 @@ "settings": {}, "uuid": "bce2a499-b0be-432c-805e-706f4ae33377" }, - "3345": { + "3346": { "varname": "redfish_storage_password", "caption": "Redfish Storage: Password", "description": "Redfish API password.", @@ -34873,7 +34884,7 @@ }, "uuid": "77904e59-da06-4e8f-a17b-2a632985a6b1" }, - "3346": { + "3347": { "varname": "redfish_storage_proxy", "caption": "Redfish Storage: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -34884,7 +34895,7 @@ }, "uuid": "d7d09b20-7082-41ca-954a-e0c24b34c0da" }, - "3347": { + "3348": { "varname": "redfish_storage_retries", "caption": "Redfish Storage: Retries", "description": "Number of extra attempts if a request to the Redfish API fails, before the check gives up. Helps against an occasionally slow or flaky management controller.", @@ -34895,7 +34906,7 @@ }, "uuid": "78bf9467-bdb5-4114-ae03-e64f4ddfda72" }, - "3348": { + "3349": { "varname": "redfish_storage_timeout", "caption": "Redfish Storage: Timeout", "description": "Network timeout in seconds.", @@ -34906,7 +34917,7 @@ }, "uuid": "59ca2c35-414e-4763-82e2-3b59c39524f6" }, - "3349": { + "3350": { "varname": "redfish_storage_url", "caption": "Redfish Storage: URL", "description": "Redfish API URL.", @@ -34917,7 +34928,7 @@ }, "uuid": "a2f07a98-af67-482c-a037-669e8edf578b" }, - "3350": { + "3351": { "varname": "redfish_storage_username", "caption": "Redfish Storage: Username", "description": "Redfish API username.", @@ -34928,7 +34939,7 @@ }, "uuid": "b2bd915d-f555-4258-bb09-83a3d9984f88" }, - "3351": { + "3352": { "varname": "redfish_storage_verbose", "caption": "Redfish Storage: Verbose?", "description": "Makes this plugin verbose during the operation. Useful for debugging and seeing what is going on under the hood. For this check that also appends every Redfish response it evaluated to its output, ready to be attached to a bug report, and writes a trace of every Redfish request, with timings, to linuxfabrik-monitoring-plugins-redfish-trace.log below the temporary directory. Unlike this check's output, the trace survives a check that the monitoring server terminates for exceeding its timeout, which is what makes it useful against a slow management controller. Passwords and session tokens are kept out of both. The output grows with the responses, so keep this switched on in a service definition only while chasing a problem.", @@ -34937,7 +34948,7 @@ "settings": {}, "uuid": "1e6304ab-5407-419f-a4eb-024be10d2702" }, - "3352": { + "3353": { "varname": "redfish_systems_always_ok", "caption": "Redfish Systems: Always OK?", "description": "Always returns OK.", @@ -34946,7 +34957,7 @@ "settings": {}, "uuid": "ff307bd7-d03e-47ff-9f48-b9c745d367eb" }, - "3353": { + "3354": { "varname": "redfish_systems_cache_expire", "caption": "Redfish Systems: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -34957,7 +34968,7 @@ }, "uuid": "13cebb7a-9965-4cc7-b559-d4055662447c" }, - "3354": { + "3355": { "varname": "redfish_systems_insecure", "caption": "Redfish Systems: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -34966,7 +34977,7 @@ "settings": {}, "uuid": "fd5d152d-ba21-4c04-81a0-c56e5ede1e3c" }, - "3355": { + "3356": { "varname": "redfish_systems_inventory", "caption": "Redfish Systems: Inventory?", "description": "Output the parsed components as JSON on stdout and exit OK, instead of running a health check. Use this to collect a hardware inventory: the JSON is a single object keyed by component type, so the output of several Redfish checks can be merged into one inventory document with `jq --slurp`.", @@ -34975,7 +34986,7 @@ "settings": {}, "uuid": "38e77961-e76f-4b4a-98f4-88789f43f951" }, - "3356": { + "3357": { "varname": "redfish_systems_no_insecure", "caption": "Redfish Systems: No Insecure?", "description": "Verify the TLS certificate against the system trust store, overriding the insecure default of this check. Use it once the endpoint presents a publicly trusted certificate, or once its CA has been added to the system trust store.", @@ -34984,7 +34995,7 @@ "settings": {}, "uuid": "4e8fea3b-d853-4f6e-8d7a-44de83cc3bfa" }, - "3357": { + "3358": { "varname": "redfish_systems_no_perfdata", "caption": "Redfish Systems: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -34993,7 +35004,7 @@ "settings": {}, "uuid": "63ef967f-4ed9-4003-820a-2d54ebe557b0" }, - "3358": { + "3359": { "varname": "redfish_systems_no_proxy", "caption": "Redfish Systems: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -35002,7 +35013,7 @@ "settings": {}, "uuid": "9e85a7e3-e39b-48c6-9364-1f1d82b29c13" }, - "3359": { + "3360": { "varname": "redfish_systems_password", "caption": "Redfish Systems: Password", "description": "Redfish API password.", @@ -35013,7 +35024,7 @@ }, "uuid": "80c35e1f-f7cb-4fcb-b562-762cf72ba4be" }, - "3360": { + "3361": { "varname": "redfish_systems_proxy", "caption": "Redfish Systems: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -35024,7 +35035,7 @@ }, "uuid": "4d4f3c48-a9ec-4c60-a781-f64e34878708" }, - "3361": { + "3362": { "varname": "redfish_systems_retries", "caption": "Redfish Systems: Retries", "description": "Number of extra attempts if a request to the Redfish API fails, before the check gives up. Helps against an occasionally slow or flaky management controller.", @@ -35035,7 +35046,7 @@ }, "uuid": "cdd1e07f-fabb-49c8-b47e-57b9df24929c" }, - "3362": { + "3363": { "varname": "redfish_systems_timeout", "caption": "Redfish Systems: Timeout", "description": "Network timeout in seconds.", @@ -35046,7 +35057,7 @@ }, "uuid": "dbfe3a04-69b3-40b1-bbf1-4d816cbebbd7" }, - "3363": { + "3364": { "varname": "redfish_systems_url", "caption": "Redfish Systems: URL", "description": "Redfish API URL.", @@ -35057,7 +35068,7 @@ }, "uuid": "3040cb79-856b-4e6c-ac8d-7a1bbd025b36" }, - "3364": { + "3365": { "varname": "redfish_systems_username", "caption": "Redfish Systems: Username", "description": "Redfish API username.", @@ -35068,7 +35079,7 @@ }, "uuid": "b1775c93-3790-4f10-af9d-301c63c6e23c" }, - "3365": { + "3366": { "varname": "redfish_systems_verbose", "caption": "Redfish Systems: Verbose?", "description": "Makes this plugin verbose during the operation. Useful for debugging and seeing what is going on under the hood. For this check that also appends every Redfish response it evaluated to its output, ready to be attached to a bug report, and writes a trace of every Redfish request, with timings, to linuxfabrik-monitoring-plugins-redfish-trace.log below the temporary directory. Unlike this check's output, the trace survives a check that the monitoring server terminates for exceeding its timeout, which is what makes it useful against a slow management controller. Passwords and session tokens are kept out of both. The output grows with the responses, so keep this switched on in a service definition only while chasing a problem.", @@ -35077,7 +35088,7 @@ "settings": {}, "uuid": "a8601e80-4168-4bd1-bb8d-558944ba737d" }, - "3366": { + "3367": { "varname": "redis_status_always_ok", "caption": "Redis Status: Always OK?", "description": "Always returns OK.", @@ -35086,7 +35097,7 @@ "settings": {}, "uuid": "79d5910d-c4bf-4281-85ef-4f34e8f04614" }, - "3367": { + "3368": { "varname": "redis_status_cacert", "caption": "Redis Status: Cacert", "description": "CA certificate file for TLS verification. Requires `--tls`.", @@ -35097,7 +35108,7 @@ }, "uuid": "16720bf0-7d82-4588-8055-57b0ee443234" }, - "3368": { + "3369": { "varname": "redis_status_critical", "caption": "Redis Status: Critical", "description": "CRIT threshold for memory usage as a percentage.", @@ -35108,7 +35119,7 @@ }, "uuid": "35c762a1-c673-4a3e-bf30-68770d52b14d" }, - "3369": { + "3370": { "varname": "redis_status_hostname", "caption": "Redis Status: Hostname", "description": "Redis server hostname.", @@ -35119,7 +35130,7 @@ }, "uuid": "f29df302-80f1-4c0b-b835-396fe1f06b10" }, - "3370": { + "3371": { "varname": "redis_status_ignore_maxmemory0", "caption": "Redis Status: Ignore Maxmemory0?", "description": "Suppress the warning when Redis maxmemory is set to 0 (unlimited).", @@ -35128,7 +35139,7 @@ "settings": {}, "uuid": "53a21ea5-e1e4-4eac-8fd8-96baeab59f94" }, - "3371": { + "3372": { "varname": "redis_status_ignore_overcommit", "caption": "Redis Status: Ignore Overcommit?", "description": "Suppress the warning when vm.overcommit_memory is not set to 1.", @@ -35137,7 +35148,7 @@ "settings": {}, "uuid": "16bca65f-dc6d-4655-a11e-f783cb3fe427" }, - "3372": { + "3373": { "varname": "redis_status_ignore_somaxconn", "caption": "Redis Status: Ignore Somaxconn?", "description": "Suppress the warning when net.core.somaxconn is lower than net.ipv4.tcp_max_syn_backlog.", @@ -35146,7 +35157,7 @@ "settings": {}, "uuid": "b36373f6-40b3-46a6-b074-ade8326cdc82" }, - "3373": { + "3374": { "varname": "redis_status_ignore_sync_partial_err", "caption": "Redis Status: Ignore Sync Partial Err?", "description": "Suppress the warning when replicas were denied a partial resync since the last check and fell back to a full sync.", @@ -35155,7 +35166,7 @@ "settings": {}, "uuid": "6b089856-43d7-4008-94d8-478fbacc7730" }, - "3374": { + "3375": { "varname": "redis_status_ignore_thp", "caption": "Redis Status: Ignore Thp?", "description": "Suppress the warning about transparent huge pages being set to \"always\".", @@ -35164,7 +35175,7 @@ "settings": {}, "uuid": "c7300af7-f285-4012-a160-2647a5a58a2b" }, - "3375": { + "3376": { "varname": "redis_status_no_perfdata", "caption": "Redis Status: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -35173,7 +35184,7 @@ "settings": {}, "uuid": "9329a107-0fec-45d8-83d3-17084ed3264c" }, - "3376": { + "3377": { "varname": "redis_status_password", "caption": "Redis Status: Password", "description": "Password for Redis server authentication.", @@ -35184,7 +35195,7 @@ }, "uuid": "eabaadd8-f4c3-4313-afee-cfea175f93aa" }, - "3377": { + "3378": { "varname": "redis_status_port", "caption": "Redis Status: Port", "description": "Redis server port.", @@ -35195,7 +35206,7 @@ }, "uuid": "15c740aa-0173-4b4f-b139-b1595d8052c8" }, - "3378": { + "3379": { "varname": "redis_status_socket", "caption": "Redis Status: Socket", "description": "Redis server Unix socket path. Overrides --hostname and --port.", @@ -35206,7 +35217,7 @@ }, "uuid": "bf84ac19-1b7a-406f-9699-08a66b0bd733" }, - "3379": { + "3380": { "varname": "redis_status_timeout", "caption": "Redis Status: Timeout", "description": "Network timeout in seconds.", @@ -35217,7 +35228,7 @@ }, "uuid": "9c342a4f-57cb-4a2a-8bc8-d797b4a65af2" }, - "3380": { + "3381": { "varname": "redis_status_tls", "caption": "Redis Status: TLS?", "description": "Establish a secure TLS connection to Redis.", @@ -35226,7 +35237,7 @@ "settings": {}, "uuid": "5390b14b-2ee3-4ad5-a1f0-dc8d94e1a5db" }, - "3381": { + "3382": { "varname": "redis_status_username", "caption": "Redis Status: Username", "description": "Username for Redis server authentication.", @@ -35237,7 +35248,7 @@ }, "uuid": "00b3c2c2-db14-46da-a0fe-27ac0b3d77ba" }, - "3382": { + "3383": { "varname": "redis_status_verbose", "caption": "Redis Status: Verbose?", "description": "Makes this plugin verbose during the operation. Useful for debugging and seeing what is going on under the hood.", @@ -35246,7 +35257,7 @@ "settings": {}, "uuid": "b810b444-d17e-4609-b579-0717285f17d1" }, - "3383": { + "3384": { "varname": "redis_status_warning", "caption": "Redis Status: Warning", "description": "WARN threshold for memory usage as a percentage.", @@ -35257,7 +35268,7 @@ }, "uuid": "eef3bebc-32c2-46fe-87cf-92c1e751c8be" }, - "3384": { + "3385": { "varname": "redis_version_always_ok", "caption": "Redis Version: Always OK?", "description": "Always returns OK.", @@ -35266,7 +35277,7 @@ "settings": {}, "uuid": "f661e5f0-ad51-4c8d-8865-630e5581b6ad" }, - "3385": { + "3386": { "varname": "redis_version_check_major", "caption": "Redis Version: Check Major?", "description": "Alert when a new major release is available, even if the current version is not yet EOL. Example: running v26 (not yet EOL) and v27 is available.", @@ -35275,7 +35286,7 @@ "settings": {}, "uuid": "3c05506c-3011-4123-9cda-4be6024a12cf" }, - "3386": { + "3387": { "varname": "redis_version_check_minor", "caption": "Redis Version: Check Minor?", "description": "Alert when a new major.minor release is available, even if the current version is not yet EOL. Example: running v26.2 (not yet EOL) and v26.3 is available.", @@ -35284,7 +35295,7 @@ "settings": {}, "uuid": "dfd3b717-0341-4ea0-9d5c-2a88f38fefb3" }, - "3387": { + "3388": { "varname": "redis_version_check_patch", "caption": "Redis Version: Check Patch?", "description": "Alert when a new major.minor.patch release is available, even if the current version is not yet EOL. Example: running v26.2.7 (not yet EOL) and v26.2.8 is available.", @@ -35293,7 +35304,7 @@ "settings": {}, "uuid": "b2a725e5-e059-416b-9db7-74eca42778e8" }, - "3388": { + "3389": { "varname": "redis_version_insecure", "caption": "Redis Version: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -35302,7 +35313,7 @@ "settings": {}, "uuid": "20804efc-9576-4da0-9236-32ab23bdecaa" }, - "3389": { + "3390": { "varname": "redis_version_no_perfdata", "caption": "Redis Version: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -35311,7 +35322,7 @@ "settings": {}, "uuid": "2c8b1a32-36f4-4fa9-9024-452755ee98eb" }, - "3390": { + "3391": { "varname": "redis_version_no_proxy", "caption": "Redis Version: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -35320,7 +35331,7 @@ "settings": {}, "uuid": "69113ba7-b938-47f6-864f-920027549d4b" }, - "3391": { + "3392": { "varname": "redis_version_offset_eol", "caption": "Redis Version: Offset Eol", "description": "Alert n days before (\"-30\") or after an EOL date (\"30\" or \"+30\").", @@ -35331,7 +35342,7 @@ }, "uuid": "196390e9-3534-4aac-bf51-09a88d0026d3" }, - "3392": { + "3393": { "varname": "redis_version_path", "caption": "Redis Version: Path", "description": "Path to the Redis binary. Resolved via $PATH when given without a directory.", @@ -35342,7 +35353,7 @@ }, "uuid": "5ebcbcb6-503f-47ae-8d71-27a6fd2f69e6" }, - "3393": { + "3394": { "varname": "redis_version_proxy", "caption": "Redis Version: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -35353,7 +35364,7 @@ }, "uuid": "193a365a-ee59-45c9-891e-b6a5f0fcd8a8" }, - "3394": { + "3395": { "varname": "redis_version_timeout", "caption": "Redis Version: Timeout", "description": "Network timeout in seconds.", @@ -35364,7 +35375,7 @@ }, "uuid": "e525c55e-a35a-4ea5-9450-d49a962f50e2" }, - "3395": { + "3396": { "varname": "redis_version_unreachable_severity", "caption": "Redis Version: Unreachable Severity", "description": "State to report when the online source is unreachable. What is used instead - bundled offline data, a cached copy, or nothing at all - is named in the output, and a clean result then only covers what that fallback could confirm.", @@ -35377,7 +35388,7 @@ }, "uuid": "8e89bc8f-ae24-4f7b-8249-b7b070dface3" }, - "3396": { + "3397": { "varname": "restic_check_always_ok", "caption": "Restic Check: Always OK?", "description": "Always returns OK.", @@ -35386,7 +35397,7 @@ "settings": {}, "uuid": "6366e0a8-4069-4b1f-85dc-365ab7aa3b31" }, - "3397": { + "3398": { "varname": "restic_check_password_file", "caption": "Restic Check: Password File", "description": "Path to the file containing the repository password. Must be a file that only root can change.", @@ -35397,7 +35408,7 @@ }, "uuid": "c78befe6-51d0-487e-b77f-21729187f690" }, - "3398": { + "3399": { "varname": "restic_check_repo", "caption": "Restic Check: Repo", "description": "Restic repository location. A local repository has to be a directory that only root can change. Give exactly one of --repo and --repository-file.", @@ -35408,7 +35419,7 @@ }, "uuid": "69c6896f-82e0-4c78-b4c7-186a8ad4357f" }, - "3399": { + "3400": { "varname": "restic_check_repository_file", "caption": "Restic Check: Repository File", "description": "Path to a file whose first line is the repository location. Use this instead of --repo for a repository whose location selects an external helper (an `rclone:` repository): the file must be one that only root can change, so an unprivileged caller cannot choose what runs. Give exactly one of --repo and --repository-file.", @@ -35419,7 +35430,7 @@ }, "uuid": "759f165a-6e1f-4aff-818e-15651d1dee7c" }, - "3400": { + "3401": { "varname": "restic_check_timeout", "caption": "Restic Check: Timeout", "description": "Network timeout in seconds.", @@ -35430,7 +35441,7 @@ }, "uuid": "be8404f2-3129-4343-b4ec-38700d454415" }, - "3401": { + "3402": { "varname": "restic_snapshots_always_ok", "caption": "Restic Snapshots: Always OK?", "description": "Always returns OK.", @@ -35439,7 +35450,7 @@ "settings": {}, "uuid": "460f9322-112a-4980-a9ee-6dff8e1afbc3" }, - "3402": { + "3403": { "varname": "restic_snapshots_critical", "caption": "Restic Snapshots: Critical", "description": "CRIT threshold for the age of the newest snapshot in each group, in hours.", @@ -35450,7 +35461,7 @@ }, "uuid": "bfa33d98-ab64-4a54-83ae-dd99da0151bd" }, - "3403": { + "3404": { "varname": "restic_snapshots_group_by", "caption": "Restic Snapshots: Group By", "description": "Comma-separated list of fields to group snapshots by. Allowed values: host, paths, tags.", @@ -35461,7 +35472,7 @@ }, "uuid": "04435f9d-0d83-44ff-979e-37804019c467" }, - "3404": { + "3405": { "varname": "restic_snapshots_host", "caption": "Restic Snapshots: Host", "description": "Only consider snapshots for this host. Can be specified multiple times.", @@ -35472,7 +35483,7 @@ }, "uuid": "17f813b5-c7eb-4186-a066-3d55550d76e3" }, - "3405": { + "3406": { "varname": "restic_snapshots_latest", "caption": "Restic Snapshots: Latest", "description": "Number of latest snapshots to show per host and path.", @@ -35483,7 +35494,7 @@ }, "uuid": "8ae13405-0362-4b02-9821-a80b44ab0392" }, - "3406": { + "3407": { "varname": "restic_snapshots_lengthy", "caption": "Restic Snapshots: Lengthy?", "description": "Extended reporting.", @@ -35492,7 +35503,7 @@ "settings": {}, "uuid": "b07120aa-86ed-4c85-9531-0d49e5c8d602" }, - "3407": { + "3408": { "varname": "restic_snapshots_no_perfdata", "caption": "Restic Snapshots: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -35501,7 +35512,7 @@ "settings": {}, "uuid": "49c3ed77-8b87-49cd-9c2d-e1f72fc4ca39" }, - "3408": { + "3409": { "varname": "restic_snapshots_password_file", "caption": "Restic Snapshots: Password File", "description": "Path to the file containing the repository password. Must be a file that only root can change.", @@ -35512,7 +35523,7 @@ }, "uuid": "64db9b76-219e-429e-b4a0-e2d47a6acd19" }, - "3409": { + "3410": { "varname": "restic_snapshots_path", "caption": "Restic Snapshots: Path", "description": "Only consider snapshots for this path. Can be specified multiple times.", @@ -35523,7 +35534,7 @@ }, "uuid": "19fcadd7-7e0b-44a4-9712-530e253fc090" }, - "3410": { + "3411": { "varname": "restic_snapshots_repo", "caption": "Restic Snapshots: Repo", "description": "Restic repository location. A local repository has to be a directory that only root can change. Give exactly one of --repo and --repository-file.", @@ -35534,7 +35545,7 @@ }, "uuid": "67690ac7-b505-4470-bff7-bd3b73877782" }, - "3411": { + "3412": { "varname": "restic_snapshots_repository_file", "caption": "Restic Snapshots: Repository File", "description": "Path to a file whose first line is the repository location. Use this instead of --repo for a repository whose location selects an external helper (an `rclone:` repository): the file must be one that only root can change, so an unprivileged caller cannot choose what runs. Give exactly one of --repo and --repository-file.", @@ -35545,7 +35556,7 @@ }, "uuid": "a87235d7-b381-4545-b779-d3ef309ae314" }, - "3412": { + "3413": { "varname": "restic_snapshots_tag", "caption": "Restic Snapshots: Tag", "description": "Only consider snapshots matching this taglist in the format `tag[,tag,...]`. Can be specified multiple times.", @@ -35556,7 +35567,7 @@ }, "uuid": "56596688-9aea-43b5-9b89-c5f3aad5a126" }, - "3413": { + "3414": { "varname": "restic_snapshots_timeout", "caption": "Restic Snapshots: Timeout", "description": "Network timeout in seconds.", @@ -35567,7 +35578,7 @@ }, "uuid": "da1bdd55-0cd3-44f5-9802-8267748858d4" }, - "3414": { + "3415": { "varname": "restic_snapshots_warning", "caption": "Restic Snapshots: Warning", "description": "WARN threshold for the age of the newest snapshot in each group, in hours.", @@ -35578,7 +35589,7 @@ }, "uuid": "bf97caf1-9b69-4636-9ca7-7915e94e9046" }, - "3415": { + "3416": { "varname": "restic_stats_always_ok", "caption": "Restic Stats: Always OK?", "description": "Always returns OK.", @@ -35587,7 +35598,7 @@ "settings": {}, "uuid": "f1a2f212-1186-4402-9ac2-896e63d65692" }, - "3416": { + "3417": { "varname": "restic_stats_host", "caption": "Restic Stats: Host", "description": "Only consider snapshots for this host. Can be specified multiple times.", @@ -35598,7 +35609,7 @@ }, "uuid": "ccbcd454-8a91-4f07-bd41-4f15427dd806" }, - "3417": { + "3418": { "varname": "restic_stats_mode", "caption": "Restic Stats: Mode", "description": "Counting mode for the statistics calculation.", @@ -35611,7 +35622,7 @@ }, "uuid": "84007f0a-f84c-4b51-abf7-acbece83df66" }, - "3418": { + "3419": { "varname": "restic_stats_no_perfdata", "caption": "Restic Stats: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -35620,7 +35631,7 @@ "settings": {}, "uuid": "9462adbe-8f4c-4410-9de1-226ca5e95a80" }, - "3419": { + "3420": { "varname": "restic_stats_password_file", "caption": "Restic Stats: Password File", "description": "Path to the file containing the repository password. Must be a file that only root can change.", @@ -35631,7 +35642,7 @@ }, "uuid": "f4ba8e92-6775-473c-a3e8-14ede8f012d4" }, - "3420": { + "3421": { "varname": "restic_stats_path", "caption": "Restic Stats: Path", "description": "Only consider snapshots for this path. Can be specified multiple times.", @@ -35642,7 +35653,7 @@ }, "uuid": "0f3f29c2-c889-453c-9d5b-6fb2c87308e9" }, - "3421": { + "3422": { "varname": "restic_stats_repo", "caption": "Restic Stats: Repo", "description": "Restic repository location. A local repository has to be a directory that only root can change. Give exactly one of --repo and --repository-file.", @@ -35653,7 +35664,7 @@ }, "uuid": "0a0184a5-481e-4445-963a-a57896d91172" }, - "3422": { + "3423": { "varname": "restic_stats_repository_file", "caption": "Restic Stats: Repository File", "description": "Path to a file whose first line is the repository location. Use this instead of --repo for a repository whose location selects an external helper (an `rclone:` repository): the file must be one that only root can change, so an unprivileged caller cannot choose what runs. Give exactly one of --repo and --repository-file.", @@ -35664,7 +35675,7 @@ }, "uuid": "85fb7409-c434-48ba-9cd4-de24b7821653" }, - "3423": { + "3424": { "varname": "restic_stats_tag", "caption": "Restic Stats: Tag", "description": "Only consider snapshots matching this taglist in the format `tag[,tag,...]`. Can be specified multiple times.", @@ -35675,7 +35686,7 @@ }, "uuid": "75720a99-42cb-4c1c-80e2-b6473e8be218" }, - "3424": { + "3425": { "varname": "restic_stats_timeout", "caption": "Restic Stats: Timeout", "description": "Network timeout in seconds.", @@ -35686,7 +35697,7 @@ }, "uuid": "09f89ffe-a3b1-4252-a0c1-240d7667d24d" }, - "3425": { + "3426": { "varname": "rhel_version_always_ok", "caption": "Rhel Version: Always OK?", "description": "Always returns OK.", @@ -35695,7 +35706,7 @@ "settings": {}, "uuid": "dcfae79b-eaa2-4be9-8a31-e6ac8d994692" }, - "3426": { + "3427": { "varname": "rhel_version_check_major", "caption": "Rhel Version: Check Major?", "description": "Alert when a new major release is available, even if the current version is not yet EOL. Example: running v26 (not yet EOL) and v27 is available.", @@ -35704,7 +35715,7 @@ "settings": {}, "uuid": "9e2baaed-0c01-44fb-bd4d-0cd4004ec022" }, - "3427": { + "3428": { "varname": "rhel_version_check_minor", "caption": "Rhel Version: Check Minor?", "description": "Alert when a new major.minor release is available, even if the current version is not yet EOL. Example: running v26.2 (not yet EOL) and v26.3 is available.", @@ -35713,7 +35724,7 @@ "settings": {}, "uuid": "2518f9c8-cb42-43d8-9490-07234ddf61ce" }, - "3428": { + "3429": { "varname": "rhel_version_check_patch", "caption": "Rhel Version: Check Patch?", "description": "Alert when a new major.minor.patch release is available, even if the current version is not yet EOL. Example: running v26.2.7 (not yet EOL) and v26.2.8 is available.", @@ -35722,7 +35733,7 @@ "settings": {}, "uuid": "cd2c383b-a730-483d-8316-c46e5e048592" }, - "3429": { + "3430": { "varname": "rhel_version_extended_support", "caption": "Rhel Version: Extended Support?", "description": "Instead of \"Maintenance Support\" EOL (default), check for \"Extended Life Cycle Support\" EOL.", @@ -35731,7 +35742,7 @@ "settings": {}, "uuid": "36d8af6d-cba6-4042-a09f-b2416d67980f" }, - "3430": { + "3431": { "varname": "rhel_version_insecure", "caption": "Rhel Version: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -35740,7 +35751,7 @@ "settings": {}, "uuid": "1792f462-8d9b-4267-b383-4567bf46efe8" }, - "3431": { + "3432": { "varname": "rhel_version_no_perfdata", "caption": "Rhel Version: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -35749,7 +35760,7 @@ "settings": {}, "uuid": "5d960068-c792-483c-9921-f6af37471edc" }, - "3432": { + "3433": { "varname": "rhel_version_no_proxy", "caption": "Rhel Version: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -35758,7 +35769,7 @@ "settings": {}, "uuid": "8ef23dcc-9db4-4c6a-a3f0-1e5ab1c3406f" }, - "3433": { + "3434": { "varname": "rhel_version_offset_eol", "caption": "Rhel Version: Offset Eol", "description": "Alert n days before (\"-30\") or after an EOL date (\"30\" or \"+30\").", @@ -35769,7 +35780,7 @@ }, "uuid": "2efcd6f2-d885-4f36-a152-c943d1109eb3" }, - "3434": { + "3435": { "varname": "rhel_version_proxy", "caption": "Rhel Version: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -35780,7 +35791,7 @@ }, "uuid": "32a17949-9547-486b-850a-1620c79690c8" }, - "3435": { + "3436": { "varname": "rhel_version_timeout", "caption": "Rhel Version: Timeout", "description": "Network timeout in seconds.", @@ -35791,7 +35802,7 @@ }, "uuid": "6395964b-57da-42c4-b677-5f36e93c3aed" }, - "3436": { + "3437": { "varname": "rhel_version_unreachable_severity", "caption": "Rhel Version: Unreachable Severity", "description": "State to report when the online source is unreachable. What is used instead - bundled offline data, a cached copy, or nothing at all - is named in the output, and a clean result then only covers what that fallback could confirm.", @@ -35804,7 +35815,7 @@ }, "uuid": "3ccdda9d-a29a-4f7a-ae08-dea44ba4e066" }, - "3437": { + "3438": { "varname": "rocketchat_stats_always_ok", "caption": "Rocket.Chat Stats: Always OK?", "description": "Always returns OK.", @@ -35813,7 +35824,7 @@ "settings": {}, "uuid": "4b1fe1ce-6c16-4fee-b3b8-22ef9ec87baa" }, - "3438": { + "3439": { "varname": "rocketchat_stats_insecure", "caption": "Rocket.Chat Stats: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -35822,7 +35833,7 @@ "settings": {}, "uuid": "e2eb536a-a684-43ed-b957-8391e408f044" }, - "3439": { + "3440": { "varname": "rocketchat_stats_no_perfdata", "caption": "Rocket.Chat Stats: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -35831,7 +35842,7 @@ "settings": {}, "uuid": "93614aa7-ec5e-4716-b37f-133371ec0876" }, - "3440": { + "3441": { "varname": "rocketchat_stats_no_proxy", "caption": "Rocket.Chat Stats: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -35840,7 +35851,7 @@ "settings": {}, "uuid": "5f4b983b-6472-49e0-9ae3-91b2438f3bad" }, - "3441": { + "3442": { "varname": "rocketchat_stats_password", "caption": "Rocket.Chat Stats: Password", "description": "Rocket.Chat API password.", @@ -35851,7 +35862,7 @@ }, "uuid": "5cf670cd-6882-4495-a1f6-b1fbc0a7e70f" }, - "3442": { + "3443": { "varname": "rocketchat_stats_proxy", "caption": "Rocket.Chat Stats: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -35862,7 +35873,7 @@ }, "uuid": "24631c17-9146-4a66-aa9d-51cbfad206d0" }, - "3443": { + "3444": { "varname": "rocketchat_stats_timeout", "caption": "Rocket.Chat Stats: Timeout", "description": "Network timeout in seconds.", @@ -35873,7 +35884,7 @@ }, "uuid": "104c7f5f-8aee-48ee-9edb-01d71487521b" }, - "3444": { + "3445": { "varname": "rocketchat_stats_url", "caption": "Rocket.Chat Stats: URL", "description": "Rocket.Chat API URL.", @@ -35884,7 +35895,7 @@ }, "uuid": "1774c56e-c5ae-49ef-b41c-93a54a1390bb" }, - "3445": { + "3446": { "varname": "rocketchat_stats_username", "caption": "Rocket.Chat Stats: Username", "description": "Rocket.Chat API username.", @@ -35895,7 +35906,7 @@ }, "uuid": "870859db-a57d-449c-9350-02d324b87b46" }, - "3446": { + "3447": { "varname": "rocketchat_version_always_ok", "caption": "Rocket.Chat Version: Always OK?", "description": "Always returns OK.", @@ -35904,7 +35915,7 @@ "settings": {}, "uuid": "18a1a375-def8-49b7-8b5c-036658d13491" }, - "3447": { + "3448": { "varname": "rocketchat_version_check_major", "caption": "Rocket.Chat Version: Check Major?", "description": "Alert when a new major release is available, even if the current version is not yet EOL. Example: running v26 (not yet EOL) and v27 is available.", @@ -35913,7 +35924,7 @@ "settings": {}, "uuid": "2ed0bb4c-c286-4f98-b4da-036703c67016" }, - "3448": { + "3449": { "varname": "rocketchat_version_check_minor", "caption": "Rocket.Chat Version: Check Minor?", "description": "Alert when a new major.minor release is available, even if the current version is not yet EOL. Example: running v26.2 (not yet EOL) and v26.3 is available.", @@ -35922,7 +35933,7 @@ "settings": {}, "uuid": "a1cab73f-f7f0-41ae-884b-98750439ff34" }, - "3449": { + "3450": { "varname": "rocketchat_version_check_patch", "caption": "Rocket.Chat Version: Check Patch?", "description": "Alert when a new major.minor.patch release is available, even if the current version is not yet EOL. Example: running v26.2.7 (not yet EOL) and v26.2.8 is available.", @@ -35931,7 +35942,7 @@ "settings": {}, "uuid": "9c65d5f5-df98-476c-9cf7-ba0148bfd8ce" }, - "3450": { + "3451": { "varname": "rocketchat_version_insecure", "caption": "Rocket.Chat Version: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -35940,7 +35951,7 @@ "settings": {}, "uuid": "22b43ced-907d-4e77-98ee-3980066245f8" }, - "3451": { + "3452": { "varname": "rocketchat_version_no_perfdata", "caption": "Rocket.Chat Version: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -35949,7 +35960,7 @@ "settings": {}, "uuid": "709bc518-559d-4282-8c28-91fb8941ca04" }, - "3452": { + "3453": { "varname": "rocketchat_version_no_proxy", "caption": "Rocket.Chat Version: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -35958,7 +35969,7 @@ "settings": {}, "uuid": "3315382a-f203-4339-969a-516f37071e3f" }, - "3453": { + "3454": { "varname": "rocketchat_version_offset_eol", "caption": "Rocket.Chat Version: Offset Eol", "description": "Alert n days before (\"-30\") or after an EOL date (\"30\" or \"+30\").", @@ -35969,7 +35980,7 @@ }, "uuid": "8bd56531-d0b1-4232-8b32-cd104cda083b" }, - "3454": { + "3455": { "varname": "rocketchat_version_password", "caption": "Rocket.Chat Version: Password", "description": "Rocket.Chat API password.", @@ -35980,7 +35991,7 @@ }, "uuid": "0faa2276-8b8c-4243-9f1c-1ee5b201f6b8" }, - "3455": { + "3456": { "varname": "rocketchat_version_proxy", "caption": "Rocket.Chat Version: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -35991,7 +36002,7 @@ }, "uuid": "f7809c42-4f60-47d5-88d0-7c476bccc714" }, - "3456": { + "3457": { "varname": "rocketchat_version_timeout", "caption": "Rocket.Chat Version: Timeout", "description": "Network timeout in seconds.", @@ -36002,7 +36013,7 @@ }, "uuid": "375577a3-fc98-410e-bd10-8a628df85719" }, - "3457": { + "3458": { "varname": "rocketchat_version_unreachable_severity", "caption": "Rocket.Chat Version: Unreachable Severity", "description": "State to report when the online source is unreachable. What is used instead - bundled offline data, a cached copy, or nothing at all - is named in the output, and a clean result then only covers what that fallback could confirm.", @@ -36015,7 +36026,7 @@ }, "uuid": "42cb714d-63ae-4101-82fc-4a70695c72e2" }, - "3458": { + "3459": { "varname": "rocketchat_version_url", "caption": "Rocket.Chat Version: URL", "description": "Rocket.Chat API URL.", @@ -36026,7 +36037,7 @@ }, "uuid": "35abdd21-dfc9-4e38-bdb6-9d8acdf761f2" }, - "3459": { + "3460": { "varname": "rocketchat_version_username", "caption": "Rocket.Chat Version: Username", "description": "Rocket.Chat API username.", @@ -36037,7 +36048,7 @@ }, "uuid": "6a182ca3-2bba-4792-b1ad-4332663e65c5" }, - "3460": { + "3461": { "varname": "rpm_database_always_ok", "caption": "RPM Database: Always OK?", "description": "Always returns OK.", @@ -36046,7 +36057,7 @@ "settings": {}, "uuid": "c8f227ec-aad0-4599-9370-f5b7e5650f9e" }, - "3461": { + "3462": { "varname": "rpm_database_no_perfdata", "caption": "RPM Database: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -36055,7 +36066,7 @@ "settings": {}, "uuid": "43a61ac6-a4ad-4fbb-96f8-eb036a47ddc8" }, - "3462": { + "3463": { "varname": "rpm_database_timeout", "caption": "RPM Database: Timeout", "description": "Network timeout in seconds.", @@ -36066,7 +36077,7 @@ }, "uuid": "feed64d7-88c5-4cb5-abc5-fad9af4b6e55" }, - "3463": { + "3464": { "varname": "rpm_lastactivity_always_ok", "caption": "RPM Lastactivity: Always OK?", "description": "Always returns OK.", @@ -36075,7 +36086,7 @@ "settings": {}, "uuid": "23ac5774-9ffd-4b62-9c93-754e82ececcf" }, - "3464": { + "3465": { "varname": "rpm_lastactivity_critical", "caption": "RPM Lastactivity: Critical", "description": "CRIT threshold for the time since the last RPM activity, in days.", @@ -36086,7 +36097,7 @@ }, "uuid": "e6b89a6c-4001-48b5-ac29-d2a1c3ee731b" }, - "3465": { + "3466": { "varname": "rpm_lastactivity_warning", "caption": "RPM Lastactivity: Warning", "description": "WARN threshold for the time since the last RPM activity, in days.", @@ -36097,7 +36108,7 @@ }, "uuid": "2107267a-5ef0-4d34-a465-e801b1e21bba" }, - "3466": { + "3467": { "varname": "rpm_updates_always_ok", "caption": "RPM Updates: Always OK?", "description": "Always returns OK.", @@ -36106,7 +36117,7 @@ "settings": {}, "uuid": "58daef4a-6c3d-41d1-96e4-87f62af56d57" }, - "3467": { + "3468": { "varname": "rpm_updates_critical", "caption": "RPM Updates: Critical", "description": "Minimum number of pending security updates to trigger a CRITICAL. Counts the updates carrying a security advisory or coming from the Rocky Linux `security` repository (if enabled), within the scope of `--query`. Unset by default, so security updates raise a WARNING like any other update until a threshold is given. Example: `--critical=1`", @@ -36117,7 +36128,7 @@ }, "uuid": "3af1f847-68f3-41c8-aab6-8d599fdfb1ef" }, - "3468": { + "3469": { "varname": "rpm_updates_grace_security", "caption": "RPM Updates: Grace Security", "description": "How long a pending security update is tolerated before it counts towards the thresholds. Starts when the update is first seen, and starts over if the package drops off the list and comes back. A duration such as `12h`, `8D` or `2W`; `0D` disables the grace period.", @@ -36128,7 +36139,7 @@ }, "uuid": "bc482990-82e6-442f-af8e-d4dbd333940b" }, - "3469": { + "3470": { "varname": "rpm_updates_grace_updates", "caption": "RPM Updates: Grace Updates", "description": "How long a pending update is tolerated before it counts towards the thresholds. Set this to cover the interval between two patch windows, so a host stays quiet about updates it has had no chance to install yet. Starts when the update is first seen, and starts over if the package drops off the list and comes back. A duration such as `12h`, `8D` or `2W`; `0D` disables the grace period.", @@ -36139,7 +36150,7 @@ }, "uuid": "5c595621-2be0-4fba-9300-07a1d4fef5cc" }, - "3470": { + "3471": { "varname": "rpm_updates_no_perfdata", "caption": "RPM Updates: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -36148,7 +36159,7 @@ "settings": {}, "uuid": "6b251aa8-b6a7-4b7c-8539-2c20d16cfd7b" }, - "3471": { + "3472": { "varname": "rpm_updates_only_critical", "caption": "RPM Updates: Only Critical?", "description": "Only report security updates and upgrades.", @@ -36157,7 +36168,7 @@ "settings": {}, "uuid": "70ad3640-3806-48d1-a788-db5e59a09fb2" }, - "3472": { + "3473": { "varname": "rpm_updates_query", "caption": "RPM Updates: Query", "description": "SQL WHERE clause to filter the list of available updates. Supports regular expressions via a REGEXP statement. See the README for a list of available columns. If specified, a list of matching updates is printed. Example: `--query='package like \"bind9-%\"'`.", @@ -36168,7 +36179,7 @@ }, "uuid": "56eaeee2-8988-47b3-9057-cf363f67da41" }, - "3473": { + "3474": { "varname": "rpm_updates_timeout", "caption": "RPM Updates: Timeout", "description": "Network timeout in seconds.", @@ -36179,7 +36190,7 @@ }, "uuid": "88935be0-efc5-411b-816c-a99de02da48d" }, - "3474": { + "3475": { "varname": "rpm_updates_warning", "caption": "RPM Updates: Warning", "description": "Minimum number of pending updates to trigger a WARNING.", @@ -36190,7 +36201,7 @@ }, "uuid": "913a0207-1e42-4498-9d1b-5997c1b90051" }, - "3475": { + "3476": { "varname": "rpm_versionlock_always_ok", "caption": "RPM Versionlock: Always OK?", "description": "Always returns OK.", @@ -36199,7 +36210,7 @@ "settings": {}, "uuid": "9561fba1-0a66-4265-b374-f0d34c82840a" }, - "3476": { + "3477": { "varname": "rpm_versionlock_check_excludes", "caption": "RPM Versionlock: Check Excludes?", "description": "Additionally report the packages excluded in the package manager configuration. An exclusion keeps a package off the host just as effectively as a version lock, but it is also used legitimately to keep two repositories apart, which is why it is not reported by default.", @@ -36208,7 +36219,7 @@ "settings": {}, "uuid": "fdde4e35-4c3a-43de-8b6b-13f73fff32d8" }, - "3477": { + "3478": { "varname": "rpm_versionlock_critical", "caption": "RPM Versionlock: Critical", "description": "CRIT threshold for the number of version locks. Supports Nagios ranges.", @@ -36219,7 +36230,7 @@ }, "uuid": "067b81d7-29fe-40f2-b505-e701211bdc86" }, - "3478": { + "3479": { "varname": "rpm_versionlock_ignore", "caption": "RPM Versionlock: Ignore", "description": "Any item matching this Python regex will be ignored. Can be specified multiple times. Example: `(?i)linuxfabrik` for a case-insensitive match.", @@ -36230,7 +36241,7 @@ }, "uuid": "66e63a9a-fc90-48d6-a2c8-6de7207354a3" }, - "3479": { + "3480": { "varname": "rpm_versionlock_lengthy", "caption": "RPM Versionlock: Lengthy?", "description": "Extended reporting.", @@ -36239,7 +36250,7 @@ "settings": {}, "uuid": "55103115-13b5-42a4-ad83-173bea281b7f" }, - "3480": { + "3481": { "varname": "rpm_versionlock_match", "caption": "RPM Versionlock: Match", "description": "Filter by this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Examples: `(?i)example` to match \"example\" regardless of case. `^(?!.*example).*$` to match any string except \"example\" (negative lookahead).", @@ -36250,7 +36261,7 @@ }, "uuid": "6e7dd6f3-b52b-43bb-8465-12a22aff45ab" }, - "3481": { + "3482": { "varname": "rpm_versionlock_no_match_severity", "caption": "RPM Versionlock: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -36263,7 +36274,7 @@ }, "uuid": "f1512803-c279-49c0-9834-92991a7eba87" }, - "3482": { + "3483": { "varname": "rpm_versionlock_no_perfdata", "caption": "RPM Versionlock: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -36272,7 +36283,7 @@ "settings": {}, "uuid": "27c5e88b-a5f5-467e-8fad-cca97179b132" }, - "3483": { + "3484": { "varname": "rpm_versionlock_warning", "caption": "RPM Versionlock: Warning", "description": "WARN threshold for the number of version locks. Supports Nagios ranges.", @@ -36283,7 +36294,7 @@ }, "uuid": "b5249fb3-176f-4a8e-84df-a8562bef8350" }, - "3484": { + "3485": { "varname": "safenet_hsm_state_always_ok", "caption": "Safenet Hsm State: Always OK?", "description": "Always returns OK.", @@ -36292,7 +36303,7 @@ "settings": {}, "uuid": "33bb6bfc-f473-4976-8217-3a89143eb75f" }, - "3485": { + "3486": { "varname": "safenet_hsm_state_critical", "caption": "Safenet Hsm State: Critical", "description": "CRIT threshold in percent.", @@ -36303,7 +36314,7 @@ }, "uuid": "10bbc626-7b0b-4bc4-a722-ca8ea351e230" }, - "3486": { + "3487": { "varname": "safenet_hsm_state_hostname", "caption": "Safenet Hsm State: Hostname", "description": "SafeNet HSM hostname or IP address.", @@ -36314,7 +36325,7 @@ }, "uuid": "36776892-e04c-40e5-a1d7-34d08427cbcc" }, - "3487": { + "3488": { "varname": "safenet_hsm_state_no_perfdata", "caption": "Safenet Hsm State: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -36323,7 +36334,7 @@ "settings": {}, "uuid": "2746f68d-e8c7-41a4-bec5-63310030ad89" }, - "3488": { + "3489": { "varname": "safenet_hsm_state_password", "caption": "Safenet Hsm State: Password", "description": "SafeNet HSM password.", @@ -36334,7 +36345,7 @@ }, "uuid": "372ba494-b827-4188-8499-131973e7d0b3" }, - "3489": { + "3490": { "varname": "safenet_hsm_state_severity", "caption": "Safenet Hsm State: Severity", "description": "Severity for alerting.", @@ -36347,7 +36358,7 @@ }, "uuid": "ae5ebe7e-afaf-4dba-9950-4c74680d8ed7" }, - "3490": { + "3491": { "varname": "safenet_hsm_state_timeout", "caption": "Safenet Hsm State: Timeout", "description": "Network timeout in seconds.", @@ -36358,7 +36369,7 @@ }, "uuid": "10e5728f-648c-4221-b357-533eddffa59d" }, - "3491": { + "3492": { "varname": "safenet_hsm_state_username", "caption": "Safenet Hsm State: Username", "description": "SafeNet HSM username. Example: `--username admin`.", @@ -36371,7 +36382,7 @@ }, "uuid": "c33c3c95-3129-40be-bcfb-b0893f8e8e28" }, - "3492": { + "3493": { "varname": "safenet_hsm_state_warning", "caption": "Safenet Hsm State: Warning", "description": "WARN threshold in percent.", @@ -36382,7 +36393,7 @@ }, "uuid": "eba807ff-6fb3-4e3b-a466-1699b61f2c3a" }, - "3493": { + "3494": { "varname": "sap_open_concur_com_always_ok", "caption": "Sap Open Concur Com: Always OK?", "description": "Always returns OK.", @@ -36391,7 +36402,7 @@ "settings": {}, "uuid": "7ddceb9c-1768-4277-bfc3-65beef1ff624" }, - "3494": { + "3495": { "varname": "sap_open_concur_com_datacenter", "caption": "Sap Open Concur Com: Datacenter", "description": "SAP Concur datacenter to query.", @@ -36404,7 +36415,7 @@ }, "uuid": "16f1cea8-3b07-41fa-bceb-8898e18899aa" }, - "3495": { + "3496": { "varname": "sap_open_concur_com_insecure", "caption": "Sap Open Concur Com: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -36413,7 +36424,7 @@ "settings": {}, "uuid": "bde88ba1-7498-49f5-809e-3fffa7194a06" }, - "3496": { + "3497": { "varname": "sap_open_concur_com_no_proxy", "caption": "Sap Open Concur Com: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -36422,7 +36433,7 @@ "settings": {}, "uuid": "124f8f4d-270e-4755-b653-a3f13acfc434" }, - "3497": { + "3498": { "varname": "sap_open_concur_com_proxy", "caption": "Sap Open Concur Com: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -36433,7 +36444,7 @@ }, "uuid": "ba46eb3a-b401-48d9-a350-474c643b0671" }, - "3498": { + "3499": { "varname": "sap_open_concur_com_service", "caption": "Sap Open Concur Com: Service", "description": "SAP Concur service to check. One of \"Analysis/Intelligence\", \"Compleat (TMC Services)\", \"Expense\", \"Imaging\", \"Invoice\", \"Mobile\", \"Request\", \"Travel\", or simply \"All\". Check https://open.concur.com to see which service is available for which datacenter.", @@ -36446,7 +36457,7 @@ }, "uuid": "13b32ef7-ae49-452e-8eab-c72d89a6b92e" }, - "3499": { + "3500": { "varname": "sap_open_concur_com_timeout", "caption": "Sap Open Concur Com: Timeout", "description": "Network timeout in seconds.", @@ -36457,7 +36468,7 @@ }, "uuid": "d9410fcd-4b71-4504-a6b1-609f05df1b96" }, - "3500": { + "3501": { "varname": "sap_open_concur_com_utc_offset", "caption": "Sap Open Concur Com: Utc Offset", "description": "UTC offset for timestamp display. Example: `--utc-offset=+0100`. Default: the current offset of the local time zone", @@ -36468,7 +36479,7 @@ }, "uuid": "7f8b1fc7-a45d-41e1-be0e-24bb5759910d" }, - "3501": { + "3502": { "varname": "scanrootkit_always_ok", "caption": "Scanrootkit: Always OK?", "description": "Always returns OK.", @@ -36477,7 +36488,7 @@ "settings": {}, "uuid": "2aefb4fc-404d-42cc-9614-0b150c5d071c" }, - "3502": { + "3503": { "varname": "scanrootkit_no_perfdata", "caption": "Scanrootkit: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -36486,7 +36497,7 @@ "settings": {}, "uuid": "b88fa430-245c-4228-acc0-e3a07e4245ee" }, - "3503": { + "3504": { "varname": "scanrootkit_severity", "caption": "Scanrootkit: Severity", "description": "Severity for alerts when rootkit indicators are found. One of \"warn\" or \"crit\".", @@ -36499,7 +36510,7 @@ }, "uuid": "e635548c-9c22-451d-a109-1be66a3a5978" }, - "3504": { + "3505": { "varname": "scheduled_task_windows_always_ok", "caption": "Scheduled Task: Always OK?", "description": "Always returns OK.", @@ -36508,7 +36519,7 @@ "settings": {}, "uuid": "eb9cfb92-893e-4f12-9c10-596f75351598" }, - "3505": { + "3506": { "varname": "scheduled_task_windows_extend_status", "caption": "Scheduled Task: Extend Status", "description": "Expected task state, appended to the default or the `--status` list. Can be specified multiple times. Example: `--extend-status=Queued`.", @@ -36521,7 +36532,7 @@ }, "uuid": "16490646-cdc8-4348-b730-c45f55233e59" }, - "3506": { + "3507": { "varname": "scheduled_task_windows_severity", "caption": "Scheduled Task: Severity", "description": "Severity when the task is not in an expected state or its last run failed.", @@ -36534,7 +36545,7 @@ }, "uuid": "6108f0fe-b3cd-44a8-819e-7073b7078728" }, - "3507": { + "3508": { "varname": "scheduled_task_windows_status", "caption": "Scheduled Task: Status", "description": "Expected task state. Replaces the default list, use `--extend-status` to append to it. Can be specified multiple times. Default: Ready, Running.", @@ -36547,7 +36558,7 @@ }, "uuid": "226de678-87de-466d-95ae-6e36601a03f3" }, - "3508": { + "3509": { "varname": "scheduled_task_windows_task", "caption": "Scheduled Task: Task", "description": "Path of the Windows scheduled task to check, its folder followed by its name, as the Task Scheduler shows it. Case-insensitive. Example: `--task=\\Microsoft\\Windows\\Defrag\\ScheduledDefrag`.", @@ -36558,7 +36569,7 @@ }, "uuid": "3a365e0d-0cf9-4d47-8904-d1918162a3a2" }, - "3509": { + "3510": { "varname": "scheduled_task_windows_timeout", "caption": "Scheduled Task: Timeout", "description": "Network timeout in seconds.", @@ -36569,7 +36580,7 @@ }, "uuid": "f01a1874-6052-4663-801c-5384f6e1c102" }, - "3510": { + "3511": { "varname": "selinux_mode_always_ok", "caption": "SELinux Mode: Always OK?", "description": "Always returns OK.", @@ -36578,7 +36589,7 @@ "settings": {}, "uuid": "6d9265c8-968f-47e8-8ace-3e745227c3b3" }, - "3511": { + "3512": { "varname": "selinux_mode_mode", "caption": "SELinux Mode: Mode", "description": "Expected SELinux mode, one of \"enforcing\", \"permissive\" or \"disabled\" (case-insensitive).", @@ -36591,7 +36602,7 @@ }, "uuid": "936d3b44-91c9-492f-8f8e-81614eb329a5" }, - "3512": { + "3513": { "varname": "sensors_battery_always_ok", "caption": "Sensors Battery: Always OK?", "description": "Always returns OK.", @@ -36600,7 +36611,7 @@ "settings": {}, "uuid": "059d820e-40be-41db-8bf0-4a1ef9aa7e4f" }, - "3513": { + "3514": { "varname": "sensors_battery_critical", "caption": "Sensors Battery: Critical", "description": "CRIT threshold for battery power left, in percent.", @@ -36611,7 +36622,7 @@ }, "uuid": "a8085162-78ef-4a19-a351-95866d344580" }, - "3514": { + "3515": { "varname": "sensors_battery_no_perfdata", "caption": "Sensors Battery: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -36620,7 +36631,7 @@ "settings": {}, "uuid": "3f4a19b1-83c9-4fee-9fcd-6a634eb98737" }, - "3515": { + "3516": { "varname": "sensors_battery_warning", "caption": "Sensors Battery: Warning", "description": "WARN threshold for battery power left, in percent.", @@ -36631,7 +36642,7 @@ }, "uuid": "2ca72c61-b128-47b0-a594-a1af572ab6aa" }, - "3516": { + "3517": { "varname": "sensors_fans_always_ok", "caption": "Sensors Fans: Always OK?", "description": "Always returns OK.", @@ -36640,7 +36651,7 @@ "settings": {}, "uuid": "0af57b0a-837d-4bcf-8670-79cf7b66b13e" }, - "3517": { + "3518": { "varname": "sensors_fans_critical", "caption": "Sensors Fans: Critical", "description": "CRIT threshold for fan speed, in RPM.", @@ -36651,7 +36662,7 @@ }, "uuid": "afdd504c-0f69-4e7c-ab06-d4157f4f74bf" }, - "3518": { + "3519": { "varname": "sensors_fans_no_perfdata", "caption": "Sensors Fans: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -36660,7 +36671,7 @@ "settings": {}, "uuid": "357ab00f-7d5a-4322-8aaf-852ea1cb3cbd" }, - "3519": { + "3520": { "varname": "sensors_fans_warning", "caption": "Sensors Fans: Warning", "description": "WARN threshold for fan speed, in RPM.", @@ -36671,7 +36682,7 @@ }, "uuid": "48379f14-4823-4625-bcef-71547c4f9e4a" }, - "3520": { + "3521": { "varname": "sensors_temperatures_always_ok", "caption": "Sensors Temperatures: Always OK?", "description": "Always returns OK.", @@ -36680,7 +36691,7 @@ "settings": {}, "uuid": "7170c8a1-70a8-4052-b98f-253d25ca28b5" }, - "3521": { + "3522": { "varname": "sensors_temperatures_ignore", "caption": "Sensors Temperatures: Ignore", "description": "Ignore sensors matching this Python regular expression on the sensor name or label. Can be specified multiple times. Example: `--ignore=\"iwlwifi_1\"` or `--ignore=\"^acpitz\"`.", @@ -36691,7 +36702,7 @@ }, "uuid": "3148036c-198e-47c1-bec8-cc4800683402" }, - "3522": { + "3523": { "varname": "sensors_temperatures_no_match_severity", "caption": "Sensors Temperatures: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -36704,7 +36715,7 @@ }, "uuid": "dba8f57b-4c09-430a-8eac-cdb367eb6225" }, - "3523": { + "3524": { "varname": "sensors_temperatures_no_perfdata", "caption": "Sensors Temperatures: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -36713,7 +36724,7 @@ "settings": {}, "uuid": "16bc36af-3f2b-4c5f-9c4a-863d8688e475" }, - "3524": { + "3525": { "varname": "service_windows_always_ok", "caption": "Service: Always OK?", "description": "Always returns OK.", @@ -36722,7 +36733,7 @@ "settings": {}, "uuid": "2f4cd078-e8c6-4c2b-b4fe-449ebc9d0afe" }, - "3525": { + "3526": { "varname": "service_windows_critical", "caption": "Service: Critical", "description": "CRIT threshold for the number of services in the expected status. Supports Nagios ranges.", @@ -36733,7 +36744,7 @@ }, "uuid": "482ad4b0-9399-47e1-82a4-2db938828426" }, - "3526": { + "3527": { "varname": "service_windows_extend_starttype", "caption": "Service: Extend Starttype", "description": "Filter by service start type, appended to the default or the `--starttype` list. Can be specified multiple times. Example: `--extend-starttype=manual`.", @@ -36746,7 +36757,7 @@ }, "uuid": "11e4b86a-690e-495b-97ac-b194ceccd4c3" }, - "3527": { + "3528": { "varname": "service_windows_extend_status", "caption": "Service: Extend Status", "description": "Expected service status, appended to the default or the `--status` list. Can be specified multiple times. Example: `--extend-status=start_pending`.", @@ -36759,7 +36770,7 @@ }, "uuid": "76e78754-381c-40d2-8a5e-e02b9d1db9f6" }, - "3528": { + "3529": { "varname": "service_windows_service", "caption": "Service: Service", "description": "Name of the Windows service(s) to check. Uses Python regular expressions. Case-insensitive.", @@ -36770,7 +36781,7 @@ }, "uuid": "046363e7-2655-49c7-96e0-42f5449da328" }, - "3529": { + "3530": { "varname": "service_windows_starttype", "caption": "Service: Starttype", "description": "Filter by service start type. Replaces the default list, use `--extend-starttype` to append to it. Can be specified multiple times. Default: automatic.", @@ -36783,7 +36794,7 @@ }, "uuid": "9fe764dd-a4de-4e61-b8d6-40849a9bebc3" }, - "3530": { + "3531": { "varname": "service_windows_status", "caption": "Service: Status", "description": "Expected service status. Replaces the default list, use `--extend-status` to append to it. Can be specified multiple times. Default: running.", @@ -36796,7 +36807,7 @@ }, "uuid": "cfedc075-96bb-4911-97cb-efaa7022193a" }, - "3531": { + "3532": { "varname": "service_windows_warning", "caption": "Service: Warning", "description": "WARN threshold for the number of services in the expected status. Supports Nagios ranges.", @@ -36807,7 +36818,7 @@ }, "uuid": "b4cdfdcd-f7bf-4f15-9347-307d5919b59b" }, - "3532": { + "3533": { "varname": "snmp_always_ok", "caption": "SNMP: Always OK?", "description": "Always returns OK.", @@ -36816,7 +36827,7 @@ "settings": {}, "uuid": "2471db3e-fcb0-4960-99f9-e1211deb343a" }, - "3533": { + "3534": { "varname": "snmp_community", "caption": "SNMP: Community", "description": "SNMP v1/v2c community string.", @@ -36827,7 +36838,7 @@ }, "uuid": "cd8cd93a-9386-4342-abca-33220ded3cc7" }, - "3534": { + "3535": { "varname": "snmp_device", "caption": "SNMP: Device", "description": "CSV file containing the SNMP OIDs. A bare filename is looked up under the bundled `./device-oids` directory. An absolute path loads a CSV from anywhere on the filesystem, so the OID definitions can live outside the plugin directory. The recommended naming convention is `class-vendor-model.csv`. `any-any-any.csv` is a good starting point showing some features. The file is trusted input: its recalculation and threshold fields are evaluated as Python expressions, so it must be writable only by trusted, privileged users. The monitoring user (for example `icinga` or `nagios`) only needs read access. Example: `--device=switch-fs-s3900.csv`. Example: `--device=/etc/icinga2/snmp-devices/switch-fs-s3900.csv`.", @@ -36838,7 +36849,7 @@ }, "uuid": "c0cfc763-6a5f-4b0f-8b32-e4000b01f830" }, - "3535": { + "3536": { "varname": "snmp_hide_ok", "caption": "SNMP: Hide OK?", "description": "Suppress OIDs with OK state from output.", @@ -36847,7 +36858,7 @@ "settings": {}, "uuid": "6547a9dc-cd34-417f-9a95-2284883b8569" }, - "3536": { + "3537": { "varname": "snmp_hide_table", "caption": "SNMP: Hide Table?", "description": "Suppress the table from output.", @@ -36856,7 +36867,7 @@ "settings": {}, "uuid": "7cd6f2fc-dcc1-4cc2-bf18-7117f38f8e59" }, - "3537": { + "3538": { "varname": "snmp_hostname", "caption": "SNMP: Hostname", "description": "SNMP appliance hostname or IP address.", @@ -36867,7 +36878,7 @@ }, "uuid": "6b9bd0e5-d731-4f49-8038-6a902b5e9218" }, - "3538": { + "3539": { "varname": "snmp_mib", "caption": "SNMP: MIB", "description": "MIB(s) to load, behaves like the `-m` option of `snmpget`. Example: `--mib=+FS-MIB` or `--mib=FS-MIB:BROTHER-MIB`.", @@ -36878,7 +36889,7 @@ }, "uuid": "44634455-a0e5-4463-81ca-7710b6c6398a" }, - "3539": { + "3540": { "varname": "snmp_mib_dir", "caption": "SNMP: MIB Dir", "description": "Colon-separated list of directories to search for MIBs, behaves like the `-M` option of `snmpget`: a leading `+` adds them to the search path of net-snmp instead of replacing it. Example: `--mib-dir=+/usr/lib64/nagios/plugins/device-mibs/switch-fs-s3900`. Default: the search path of net-snmp.", @@ -36889,7 +36900,7 @@ }, "uuid": "ee829f8b-ac45-45ae-9718-97b08e50c582" }, - "3540": { + "3541": { "varname": "snmp_no_perfdata", "caption": "SNMP: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -36898,7 +36909,7 @@ "settings": {}, "uuid": "983ec0dd-525e-4c09-a0a7-97603d4c1a99" }, - "3541": { + "3542": { "varname": "snmp_snmp_version", "caption": "SNMP: SNMP Version", "description": "SNMP version to use.", @@ -36911,7 +36922,7 @@ }, "uuid": "e6aba866-969f-4f4a-9116-9b92e9f7b481" }, - "3542": { + "3543": { "varname": "snmp_snmpconf_path", "caption": "SNMP: Snmpconf Path", "description": "Colon-separated list of directories added to the net-snmp config search path (`SNMPCONFPATH`), so the credentials are read from a config file instead of being exposed on the command line and in the process list. Put a file named `snmp.conf` (or `snmpget.conf`) into one of the directories and set `defCommunity` (v1/v2c) or `defAuthPassphrase`/`defPrivPassphrase` (v3) in it. When set, `--community`, `--v3-auth-prot-password` and `--v3-priv-prot-password` are ignored. Keep the file readable only by the monitoring user. Example: `--snmpconf-path=/var/spool/icinga2/.snmp`.", @@ -36922,7 +36933,7 @@ }, "uuid": "76ca7839-cf4e-4a02-ab2d-f0a7da170fe2" }, - "3543": { + "3544": { "varname": "snmp_timeout", "caption": "SNMP: Timeout", "description": "Network timeout in seconds.", @@ -36933,7 +36944,7 @@ }, "uuid": "2a99ff07-0562-4759-8fd0-3639297b54e3" }, - "3544": { + "3545": { "varname": "snmp_v3_auth_prot", "caption": "SNMP: v3 Auth Prot", "description": "SNMPv3 authentication protocol.", @@ -36946,7 +36957,7 @@ }, "uuid": "cb551079-71f3-4012-8182-cf4c82b20f99" }, - "3545": { + "3546": { "varname": "snmp_v3_auth_prot_password", "caption": "SNMP: v3 Auth Prot Password", "description": "SNMPv3 authentication protocol passphrase.", @@ -36957,7 +36968,7 @@ }, "uuid": "70fd4bb9-935c-4b05-97e5-f5f6d834f46b" }, - "3546": { + "3547": { "varname": "snmp_v3_boots_time", "caption": "SNMP: v3 Boots Time", "description": "SNMPv3 destination engine boots and time, as the comma-separated pair `boots,time` expected by `snmpget -Z`. Example: `--v3-boots-time 1,42`.", @@ -36968,7 +36979,7 @@ }, "uuid": "54d46a14-db2f-4812-9b6a-7bc06cf515d5" }, - "3547": { + "3548": { "varname": "snmp_v3_context", "caption": "SNMP: v3 Context", "description": "SNMPv3 context name. Example: `--v3-context bridge1`.", @@ -36979,7 +36990,7 @@ }, "uuid": "63d8670c-f0b1-41bf-8889-fbfb1ef9ddca" }, - "3548": { + "3549": { "varname": "snmp_v3_context_engine_id", "caption": "SNMP: v3 Context Engine ID", "description": "SNMPv3 context engine ID. Example: `--v3-context-engine-id 800000020109840301`.", @@ -36990,7 +37001,7 @@ }, "uuid": "69e04d85-87d5-4954-880c-4a8de5e8c9b2" }, - "3549": { + "3550": { "varname": "snmp_v3_level", "caption": "SNMP: v3 Level", "description": "SNMPv3 security level.", @@ -37003,7 +37014,7 @@ }, "uuid": "9108eb88-11fa-4f83-ac26-3be81fb6e7e6" }, - "3550": { + "3551": { "varname": "snmp_v3_priv_prot", "caption": "SNMP: v3 Priv Prot", "description": "SNMPv3 privacy protocol. `AES-192` and `AES-256` require a net-snmp built with Blumenthal AES draft support; a stock build rejects them.", @@ -37016,7 +37027,7 @@ }, "uuid": "ebcce2dc-3df1-47a1-ac6c-627b315789e2" }, - "3551": { + "3552": { "varname": "snmp_v3_priv_prot_password", "caption": "SNMP: v3 Priv Prot Password", "description": "SNMPv3 privacy protocol passphrase.", @@ -37027,7 +37038,7 @@ }, "uuid": "f39688e1-6d0c-4628-b940-58ea113afa18" }, - "3552": { + "3553": { "varname": "snmp_v3_security_engine_id", "caption": "SNMP: v3 Security Engine ID", "description": "SNMPv3 security engine ID. Example: `--v3-security-engine-id 800000020109840301`.", @@ -37038,7 +37049,7 @@ }, "uuid": "28f9fdaf-da72-4850-b3ca-edf559bf380b" }, - "3553": { + "3554": { "varname": "snmp_v3_username", "caption": "SNMP: v3 Username", "description": "SNMPv3 security name (username). Example: `--v3-username bert`.", @@ -37049,7 +37060,7 @@ }, "uuid": "a9b10cbd-0ea9-4019-80ad-15a310523eee" }, - "3554": { + "3555": { "varname": "spring_boot_actuator_health_always_ok", "caption": "Spring Boot Actuator Health: Always OK?", "description": "Always returns OK.", @@ -37058,7 +37069,7 @@ "settings": {}, "uuid": "a5cccbfa-4ff6-4f71-812f-e3f19a99acc1" }, - "3555": { + "3556": { "varname": "spring_boot_actuator_health_component_severity", "caption": "Spring Boot Actuator Health: Component Severity", "description": "Map an API status (`UP`, `DEGRADED`, `DOWN`) for a specific component to a Nagios state (`ok`, `warn`, `crit`, `unknown`). Can be specified multiple times. Format: `component-name,api-status,nagios-state`. Example: `--component-severity hikariConnectionPool,DEGRADED,crit`.", @@ -37069,7 +37080,7 @@ }, "uuid": "522fa78d-8276-4f20-8def-2d9146aa1647" }, - "3556": { + "3557": { "varname": "spring_boot_actuator_health_detail_severity", "caption": "Spring Boot Actuator Health: Detail Severity", "description": "Threshold for a numeric component detail value. Can be specified multiple times. Format: `component-name,detail-name,warn,crit`. Example: `--detail-severity hikariConnectionPool,activeConnections,@10:20,@0:9`.", @@ -37080,7 +37091,7 @@ }, "uuid": "1a4654be-91cd-448f-b375-cced8bb4cbeb" }, - "3557": { + "3558": { "varname": "spring_boot_actuator_health_insecure", "caption": "Spring Boot Actuator Health: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -37089,7 +37100,7 @@ "settings": {}, "uuid": "88a6e6b5-5647-4c3c-9390-ec26c6077994" }, - "3558": { + "3559": { "varname": "spring_boot_actuator_health_no_perfdata", "caption": "Spring Boot Actuator Health: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -37098,7 +37109,7 @@ "settings": {}, "uuid": "544e26a6-d6cb-4745-a538-1266898dcc38" }, - "3559": { + "3560": { "varname": "spring_boot_actuator_health_no_proxy", "caption": "Spring Boot Actuator Health: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -37107,7 +37118,7 @@ "settings": {}, "uuid": "a0608290-bfdb-43cc-845f-62118bbf8174" }, - "3560": { + "3561": { "varname": "spring_boot_actuator_health_proxy", "caption": "Spring Boot Actuator Health: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -37118,7 +37129,7 @@ }, "uuid": "b18ff7d2-6899-4b0a-8fff-760574cd94b2" }, - "3561": { + "3562": { "varname": "spring_boot_actuator_health_timeout", "caption": "Spring Boot Actuator Health: Timeout", "description": "Network timeout in seconds.", @@ -37129,7 +37140,7 @@ }, "uuid": "bb231ad9-6bd1-4fe4-afd6-6a16e199c800" }, - "3562": { + "3563": { "varname": "spring_boot_actuator_health_url", "caption": "Spring Boot Actuator Health: URL", "description": "Spring Boot Actuator health endpoint URL. Example: `--url http://server:80/health/diskSpace`.", @@ -37140,7 +37151,7 @@ }, "uuid": "5b789799-e63f-48cc-b085-e7c95f5ab174" }, - "3563": { + "3564": { "varname": "spring_boot_actuator_health_verbose", "caption": "Spring Boot Actuator Health: Verbose?", "description": "Makes this plugin verbose during the operation. Useful for debugging and seeing what is going on under the hood.", @@ -37149,7 +37160,7 @@ "settings": {}, "uuid": "968831ec-412d-4900-ba47-2765542fbe60" }, - "3564": { + "3565": { "varname": "sshd_logfile_aborted_connections_critical", "caption": "Sshd Logfile: Aborted Connections Critical", "description": "Number of connections that ended before authentication within `--lookback` that returns CRITICAL. 0 turns the threshold off. Example: `--aborted-connections-critical=5000`.", @@ -37160,7 +37171,7 @@ }, "uuid": "b2ca7c79-e9f6-4825-9888-9fbb0ce9e737" }, - "3565": { + "3566": { "varname": "sshd_logfile_aborted_connections_warning", "caption": "Sshd Logfile: Aborted Connections Warning", "description": "Number of connections that ended before authentication within `--lookback` that returns WARNING. Every host answering on the SSH port collects these all day, so this is meant to catch a scan starting and not the background noise. 0 turns the threshold off. Example: `--aborted-connections-warning=500`.", @@ -37171,7 +37182,7 @@ }, "uuid": "2c85eace-ca0c-4aee-9b9c-f766237fd477" }, - "3566": { + "3567": { "varname": "sshd_logfile_access_denials_critical", "caption": "Sshd Logfile: Access Denials Critical", "description": "Number of accounts turned away by policy within `--lookback` that returns CRITICAL. 0 turns the threshold off. Example: `--access-denials-critical=200`.", @@ -37182,7 +37193,7 @@ }, "uuid": "63982ab2-b4d3-435e-9f21-bb61fdda89a0" }, - "3567": { + "3568": { "varname": "sshd_logfile_access_denials_warning", "caption": "Sshd Logfile: Access Denials Warning", "description": "Number of accounts turned away by policy within `--lookback` that returns WARNING. Counts the accounts that exist and that `AllowUsers`, `DenyUsers`, the group lists, a missing login shell or a locked password refused. 0 turns the threshold off. Example: `--access-denials-warning=1`.", @@ -37193,7 +37204,7 @@ }, "uuid": "96c64cb8-9793-44b2-abd0-d355cfef0511" }, - "3568": { + "3569": { "varname": "sshd_logfile_always_ok", "caption": "Sshd Logfile: Always OK?", "description": "Always returns OK.", @@ -37202,7 +37213,7 @@ "settings": {}, "uuid": "b2a97c4d-0eee-471d-8c8e-3ba9edd07fb5" }, - "3569": { + "3570": { "varname": "sshd_logfile_auth_failures_critical", "caption": "Sshd Logfile: Auth Failures Critical", "description": "Number of failed authentications for accounts that exist within `--lookback` that returns CRITICAL. 0 turns the threshold off. Example: `--auth-failures-critical=200`.", @@ -37213,7 +37224,7 @@ }, "uuid": "07106c25-95b2-49bc-adf7-03a638a0338d" }, - "3570": { + "3571": { "varname": "sshd_logfile_auth_failures_warning", "caption": "Sshd Logfile: Auth Failures Warning", "description": "Number of failed authentications for accounts that exist within `--lookback` that returns WARNING. Attempts for accounts that do not exist are counted by `--invalid-users-warning` instead. 0 turns the threshold off. Example: `--auth-failures-warning=5`.", @@ -37224,7 +37235,7 @@ }, "uuid": "7fcb6572-75db-4110-ad30-21e4f97297a1" }, - "3571": { + "3572": { "varname": "sshd_logfile_icinga_callback", "caption": "Sshd Logfile: Icinga Callback?", "description": "Ask the monitoring server whether the service running this check is acknowledged. Where it is, what this run reports is remembered as already handled, so it no longer raises an alert on the following runs. Requires `--icinga-url`, `--icinga-username`, `--icinga-password` and `--icinga-service-name`.", @@ -37233,7 +37244,7 @@ "settings": {}, "uuid": "51a1affa-7c6f-472d-97fa-ac28f10889fb" }, - "3572": { + "3573": { "varname": "sshd_logfile_icinga_password", "caption": "Sshd Logfile: Icinga Password", "description": "Monitoring server API password.", @@ -37244,7 +37255,7 @@ }, "uuid": "dbdf051d-1c01-43a4-8d15-98bfb96b00e2" }, - "3573": { + "3574": { "varname": "sshd_logfile_icinga_service_name", "caption": "Sshd Logfile: Icinga Service Name", "description": "Unique name of the service running this check, as the monitoring server knows it. Take it from the `__name` service attribute. Example: `monitoring-server!my-service-name`.", @@ -37255,7 +37266,7 @@ }, "uuid": "f9721277-938f-4683-a338-9313e2b901d1" }, - "3574": { + "3575": { "varname": "sshd_logfile_icinga_url", "caption": "Sshd Logfile: Icinga URL", "description": "Monitoring server API URL. Example: `https://monitoring.example.com:5665`.", @@ -37266,7 +37277,7 @@ }, "uuid": "0bae1d6c-0158-4be0-9a88-101144e8f431" }, - "3575": { + "3576": { "varname": "sshd_logfile_icinga_username", "caption": "Sshd Logfile: Icinga Username", "description": "Monitoring server API username.", @@ -37277,7 +37288,7 @@ }, "uuid": "34ea27f6-232a-4ab6-bc43-04dbca3f9aca" }, - "3576": { + "3577": { "varname": "sshd_logfile_ignore", "caption": "Sshd Logfile: Ignore", "description": "Ignore a log line matching this Python regular expression. The log line is lowercased before matching, so write the pattern in lowercase (or use the `(?i)` flag). Can be specified multiple times. Example: `--ignore='invalid user'`.", @@ -37288,7 +37299,7 @@ }, "uuid": "7e1cd102-e2b1-4554-8d26-e325f42da414" }, - "3577": { + "3578": { "varname": "sshd_logfile_insecure", "caption": "Sshd Logfile: Insecure?", "description": "Applies to the connection to the monitoring server that `--icinga-callback` makes, which is the only network connection this check opens. This option explicitly allows insecure SSL connections.", @@ -37297,7 +37308,7 @@ "settings": {}, "uuid": "8e0e75ad-dc87-4fcd-884b-c1d7c8d73d1f" }, - "3578": { + "3579": { "varname": "sshd_logfile_invalid_users_critical", "caption": "Sshd Logfile: Invalid Users Critical", "description": "Number of logins attempted for accounts that do not exist within `--lookback` that returns CRITICAL. 0 turns the threshold off. Example: `--invalid-users-critical=500`.", @@ -37308,7 +37319,7 @@ }, "uuid": "07640833-a2b0-4563-b5ac-4d7e8ba3372e" }, - "3579": { + "3580": { "varname": "sshd_logfile_invalid_users_warning", "caption": "Sshd Logfile: Invalid Users Warning", "description": "Number of logins attempted for accounts that do not exist within `--lookback` that returns WARNING. Counted once per connection, however many passwords it went through. 0 turns the threshold off. Example: `--invalid-users-warning=50`.", @@ -37319,7 +37330,7 @@ }, "uuid": "67113f2d-6cb9-45d6-9821-93d955147179" }, - "3580": { + "3581": { "varname": "sshd_logfile_lookback", "caption": "Sshd Logfile: Lookback", "description": "Failed authentications, invalid users, access denials, throttled and aborted connections are counted within this window rather than reported one by one. Time window in seconds to look back over, ending at the moment of the run. Only what falls within it is counted, so what is reported is how often something happened lately rather than a total that keeps growing for as long as the source is kept. Example: `--lookback=3600`.", @@ -37330,7 +37341,7 @@ }, "uuid": "ada6ca3b-f411-4dfe-8053-778e0fd727ba" }, - "3581": { + "3582": { "varname": "sshd_logfile_match", "caption": "Sshd Logfile: Match", "description": "Only consider a log line matching this Python regular expression. The log line is lowercased before matching, so write the pattern in lowercase (or use the `(?i)` flag). Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Example: `--match='sshd-session'`.", @@ -37341,7 +37352,7 @@ }, "uuid": "4bcc32b7-9ce2-4588-82ec-f896e6b966ad" }, - "3582": { + "3583": { "varname": "sshd_logfile_no_insecure", "caption": "Sshd Logfile: No Insecure?", "description": "Applies to the connection to the monitoring server that `--icinga-callback` makes, which is the only network connection this check opens. Verify the TLS certificate against the system trust store, overriding the insecure default of this check. Use it once the endpoint presents a publicly trusted certificate, or once its CA has been added to the system trust store.", @@ -37350,7 +37361,7 @@ "settings": {}, "uuid": "05c6071d-e1c5-4591-9b57-199e34733e13" }, - "3583": { + "3584": { "varname": "sshd_logfile_no_match_severity", "caption": "Sshd Logfile: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -37363,7 +37374,7 @@ }, "uuid": "f0101888-ad93-4299-ba28-2c550e66b279" }, - "3584": { + "3585": { "varname": "sshd_logfile_no_per_source", "caption": "Sshd Logfile: No Per Source?", "description": "Judge a rate by everything that arrived within the window, whatever source the lines name. Use this where the log reaches this check through something that rewrites or drops the address of the peer, or where every source is as interesting as the next.", @@ -37372,7 +37383,7 @@ "settings": {}, "uuid": "2c48844d-fe95-42cd-a768-b586590e0780" }, - "3585": { + "3586": { "varname": "sshd_logfile_no_perfdata", "caption": "Sshd Logfile: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -37381,7 +37392,7 @@ "settings": {}, "uuid": "bf5a5c2f-2671-4871-8175-04a0196223b3" }, - "3586": { + "3587": { "varname": "sshd_logfile_no_proxy", "caption": "Sshd Logfile: No Proxy?", "description": "Applies to the connection to the monitoring server that `--icinga-callback` makes, which is the only network connection this check opens. Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -37390,7 +37401,7 @@ "settings": {}, "uuid": "fb4aefb0-d0b8-4fca-b036-e6b871078a72" }, - "3587": { + "3588": { "varname": "sshd_logfile_per_source", "caption": "Sshd Logfile: Per Source?", "description": "Judge a rate by the busiest single source address rather than by everything that arrived. A handful of failures from one address within the window is somebody working on this host; the same number spread over as many addresses is the background of an open network going past, and only the first is worth reporting. Lines that name no source are counted together as one, so a burst of those still reports.", @@ -37399,7 +37410,7 @@ "settings": {}, "uuid": "92aff35f-32cd-4982-9820-12643ac1714a" }, - "3588": { + "3589": { "varname": "sshd_logfile_proxy", "caption": "Sshd Logfile: Proxy", "description": "Applies to the connection to the monitoring server that `--icinga-callback` makes, which is the only network connection this check opens. Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -37410,7 +37421,7 @@ }, "uuid": "5b0634d0-c337-4421-958f-289323b3c531" }, - "3589": { + "3590": { "varname": "sshd_logfile_server_log", "caption": "Sshd Logfile: Server Log", "description": "Log source to read from. Accepts a file path, `docker:CONTAINER`, `podman:CONTAINER`, `kubectl:CONTAINER` or `systemd:UNITNAME`. Can be specified multiple times, and everything named is then read as one window; a source named twice is read once. If omitted, the check takes the first of the usual authentication logs of the distributions that exists and reads the journal of the sshd unit along with it; what the two share is counted once. Example: `--server-log=systemd:sshd.service`.", @@ -37421,7 +37432,7 @@ }, "uuid": "19b70f53-c9b8-4362-8415-8262dee43d80" }, - "3590": { + "3591": { "varname": "sshd_logfile_throttled_connections_critical", "caption": "Sshd Logfile: Throttled Connections Critical", "description": "Number of connections refused for being past `MaxStartups` within `--lookback` that returns CRITICAL. 0 turns the threshold off. Example: `--throttled-connections-critical=50`.", @@ -37432,7 +37443,7 @@ }, "uuid": "ffa8e41c-231a-44b2-9ab9-726bb2d4ae0f" }, - "3591": { + "3592": { "varname": "sshd_logfile_throttled_connections_warning", "caption": "Sshd Logfile: Throttled Connections Warning", "description": "Number of connections refused for being past `MaxStartups` within `--lookback` that returns WARNING. These hit whoever connects next, an administrator included, which is why one of them is already worth reporting. 0 turns the threshold off. Example: `--throttled-connections-warning=5`.", @@ -37443,7 +37454,7 @@ }, "uuid": "2ccf7abd-f993-47be-8cf1-ad217b3093f5" }, - "3592": { + "3593": { "varname": "sshd_logfile_timeout", "caption": "Sshd Logfile: Timeout", "description": "Network timeout in seconds.", @@ -37454,7 +37465,7 @@ }, "uuid": "a9f4502c-6a71-4faa-8bb8-89825115af03" }, - "3593": { + "3594": { "varname": "starface_account_stats_always_ok", "caption": "Starface Account Stats: Always OK?", "description": "Always returns OK.", @@ -37463,7 +37474,7 @@ "settings": {}, "uuid": "2300a93b-1383-43ea-a9fd-0c4e192d692a" }, - "3594": { + "3595": { "varname": "starface_account_stats_cache_expire", "caption": "Starface Account Stats: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -37474,7 +37485,7 @@ }, "uuid": "868b9aed-7476-481f-968e-4bedd447b7bd" }, - "3595": { + "3596": { "varname": "starface_account_stats_hostname", "caption": "Starface Account Stats: Hostname", "description": "Starface PBX hostname or IP address.", @@ -37485,7 +37496,7 @@ }, "uuid": "10371745-be68-4aa6-82cf-f22a165a3a93" }, - "3596": { + "3597": { "varname": "starface_account_stats_ipv6", "caption": "Starface Account Stats: IPv6?", "description": "Use IPv6.", @@ -37494,7 +37505,7 @@ "settings": {}, "uuid": "153f01b9-19db-42f8-9e78-30e1136ff3a7" }, - "3597": { + "3598": { "varname": "starface_account_stats_no_perfdata", "caption": "Starface Account Stats: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -37503,7 +37514,7 @@ "settings": {}, "uuid": "9373ae7f-193a-4443-a8a3-397870543b60" }, - "3598": { + "3599": { "varname": "starface_account_stats_port", "caption": "Starface Account Stats: Port", "description": "Starface PBX monitoring port.", @@ -37514,7 +37525,7 @@ }, "uuid": "e80fe7ec-10de-4e03-8e8f-a51a02d3d23a" }, - "3599": { + "3600": { "varname": "starface_account_stats_timeout", "caption": "Starface Account Stats: Timeout", "description": "Network timeout in seconds.", @@ -37525,7 +37536,7 @@ }, "uuid": "b29ff37f-5951-4094-9c6b-02e553bf808d" }, - "3600": { + "3601": { "varname": "starface_backup_status_always_ok", "caption": "Starface Backup Status: Always OK?", "description": "Always returns OK.", @@ -37534,7 +37545,7 @@ "settings": {}, "uuid": "2e655bf0-713c-4335-965c-dd54cbd192dc" }, - "3601": { + "3602": { "varname": "starface_backup_status_cache_expire", "caption": "Starface Backup Status: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -37545,7 +37556,7 @@ }, "uuid": "9a3f2ec1-85cd-4d82-b2a7-8e3e9795300d" }, - "3602": { + "3603": { "varname": "starface_backup_status_critical", "caption": "Starface Backup Status: Critical", "description": "CRIT threshold for the age of the last backup, in hours.", @@ -37556,7 +37567,7 @@ }, "uuid": "31e4146b-72cb-4e50-9fa5-07fa00fb09c9" }, - "3603": { + "3604": { "varname": "starface_backup_status_hostname", "caption": "Starface Backup Status: Hostname", "description": "Starface PBX hostname or IP address.", @@ -37567,7 +37578,7 @@ }, "uuid": "cc28cc19-5363-45c0-842c-b56da2a4dedf" }, - "3604": { + "3605": { "varname": "starface_backup_status_ipv6", "caption": "Starface Backup Status: IPv6?", "description": "Use IPv6.", @@ -37576,7 +37587,7 @@ "settings": {}, "uuid": "74ffac1e-6150-46d4-9bb3-4bd7c4dcb584" }, - "3605": { + "3606": { "varname": "starface_backup_status_no_perfdata", "caption": "Starface Backup Status: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -37585,7 +37596,7 @@ "settings": {}, "uuid": "fc9e1e9f-a9a7-4d25-92dc-b7bcc6b4cc70" }, - "3606": { + "3607": { "varname": "starface_backup_status_port", "caption": "Starface Backup Status: Port", "description": "Starface PBX monitoring port.", @@ -37596,7 +37607,7 @@ }, "uuid": "2a6e2bc8-8675-48f3-82f3-0c9ed3a10b68" }, - "3607": { + "3608": { "varname": "starface_backup_status_timeout", "caption": "Starface Backup Status: Timeout", "description": "Network timeout in seconds.", @@ -37607,7 +37618,7 @@ }, "uuid": "cb265177-4a00-4d36-afe3-79cbcf9d09fd" }, - "3608": { + "3609": { "varname": "starface_backup_status_warning", "caption": "Starface Backup Status: Warning", "description": "WARN threshold for the age of the last backup, in hours.", @@ -37618,7 +37629,7 @@ }, "uuid": "5b60c0ba-39df-4b55-b5d2-0da001bfb25a" }, - "3609": { + "3610": { "varname": "starface_channel_status_always_ok", "caption": "Starface Channel Status: Always OK?", "description": "Always returns OK.", @@ -37627,7 +37638,7 @@ "settings": {}, "uuid": "408b9cab-e290-4995-aef9-6bf684677dea" }, - "3610": { + "3611": { "varname": "starface_channel_status_cache_expire", "caption": "Starface Channel Status: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -37638,7 +37649,7 @@ }, "uuid": "55e66060-8577-4349-9106-de77926dd51c" }, - "3611": { + "3612": { "varname": "starface_channel_status_critical", "caption": "Starface Channel Status: Critical", "description": "CRIT threshold in percent.", @@ -37649,7 +37660,7 @@ }, "uuid": "698b5d53-d01f-4b2c-be03-bc8cb2226d9f" }, - "3612": { + "3613": { "varname": "starface_channel_status_hostname", "caption": "Starface Channel Status: Hostname", "description": "Starface PBX hostname or IP address.", @@ -37660,7 +37671,7 @@ }, "uuid": "4efe59dc-ae6f-4a5c-b88e-31f93f6b7914" }, - "3613": { + "3614": { "varname": "starface_channel_status_ipv6", "caption": "Starface Channel Status: IPv6?", "description": "Use IPv6.", @@ -37669,7 +37680,7 @@ "settings": {}, "uuid": "3b991138-95bc-4a03-9979-5fc9f53465e5" }, - "3614": { + "3615": { "varname": "starface_channel_status_no_perfdata", "caption": "Starface Channel Status: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -37678,7 +37689,7 @@ "settings": {}, "uuid": "233297cc-ca64-4e98-8ccc-cc7ac2a66d73" }, - "3615": { + "3616": { "varname": "starface_channel_status_port", "caption": "Starface Channel Status: Port", "description": "Starface PBX monitoring port.", @@ -37689,7 +37700,7 @@ }, "uuid": "c582ecf2-5a2b-4a6f-9c4c-b20e9f3f9ae8" }, - "3616": { + "3617": { "varname": "starface_channel_status_timeout", "caption": "Starface Channel Status: Timeout", "description": "Network timeout in seconds.", @@ -37700,7 +37711,7 @@ }, "uuid": "06936338-147a-4227-9ba4-d5927fe6418e" }, - "3617": { + "3618": { "varname": "starface_channel_status_warning", "caption": "Starface Channel Status: Warning", "description": "WARN threshold in percent.", @@ -37711,7 +37722,7 @@ }, "uuid": "7afc9657-1553-43e5-8e71-243763187ff0" }, - "3618": { + "3619": { "varname": "starface_database_stats_always_ok", "caption": "Starface Database Stats: Always OK?", "description": "Always returns OK.", @@ -37720,7 +37731,7 @@ "settings": {}, "uuid": "be047d70-e50d-4aec-af04-c88d3c814249" }, - "3619": { + "3620": { "varname": "starface_database_stats_cache_expire", "caption": "Starface Database Stats: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -37731,7 +37742,7 @@ }, "uuid": "b9d46fe9-6a1a-430f-a7bb-f572a8f6d3a2" }, - "3620": { + "3621": { "varname": "starface_database_stats_hostname", "caption": "Starface Database Stats: Hostname", "description": "Starface PBX hostname or IP address.", @@ -37742,7 +37753,7 @@ }, "uuid": "ec25cb21-a99f-4ae8-95ed-99bf577e045a" }, - "3621": { + "3622": { "varname": "starface_database_stats_ipv6", "caption": "Starface Database Stats: IPv6?", "description": "Use IPv6.", @@ -37751,7 +37762,7 @@ "settings": {}, "uuid": "79f211c5-3a7e-4561-9a48-70876fb1aa02" }, - "3622": { + "3623": { "varname": "starface_database_stats_no_perfdata", "caption": "Starface Database Stats: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -37760,7 +37771,7 @@ "settings": {}, "uuid": "4f932237-f031-46a5-910c-3184efd3ea91" }, - "3623": { + "3624": { "varname": "starface_database_stats_port", "caption": "Starface Database Stats: Port", "description": "Starface PBX monitoring port.", @@ -37771,7 +37782,7 @@ }, "uuid": "2418eb21-65bb-4929-b3f8-55d61cc6dcaa" }, - "3624": { + "3625": { "varname": "starface_database_stats_timeout", "caption": "Starface Database Stats: Timeout", "description": "Network timeout in seconds.", @@ -37782,7 +37793,7 @@ }, "uuid": "b8108526-f7c2-4390-abc1-ed307a6c56c3" }, - "3625": { + "3626": { "varname": "starface_java_memory_usage_always_ok", "caption": "Starface Java Memory Usage: Always OK?", "description": "Always returns OK.", @@ -37791,7 +37802,7 @@ "settings": {}, "uuid": "cd73e242-5e9b-4162-bc04-16ca69238c8b" }, - "3626": { + "3627": { "varname": "starface_java_memory_usage_cache_expire", "caption": "Starface Java Memory Usage: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -37802,7 +37813,7 @@ }, "uuid": "9f71427a-7dc8-47cb-8aaa-b6eb117c9e17" }, - "3627": { + "3628": { "varname": "starface_java_memory_usage_critical", "caption": "Starface Java Memory Usage: Critical", "description": "CRIT threshold in percent.", @@ -37813,7 +37824,7 @@ }, "uuid": "be1946d3-b986-40bb-97c7-f9cb3dd8a3ce" }, - "3628": { + "3629": { "varname": "starface_java_memory_usage_hostname", "caption": "Starface Java Memory Usage: Hostname", "description": "Starface PBX hostname or IP address.", @@ -37824,7 +37835,7 @@ }, "uuid": "b4481cf2-9f8e-4943-965e-610c0345ba14" }, - "3629": { + "3630": { "varname": "starface_java_memory_usage_ipv6", "caption": "Starface Java Memory Usage: IPv6?", "description": "Use IPv6.", @@ -37833,7 +37844,7 @@ "settings": {}, "uuid": "de62dd2e-9b50-4023-87a5-b97e35e27d03" }, - "3630": { + "3631": { "varname": "starface_java_memory_usage_no_perfdata", "caption": "Starface Java Memory Usage: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -37842,7 +37853,7 @@ "settings": {}, "uuid": "34a26908-d38b-459e-a298-1cc64f269a72" }, - "3631": { + "3632": { "varname": "starface_java_memory_usage_port", "caption": "Starface Java Memory Usage: Port", "description": "Starface PBX monitoring port.", @@ -37853,7 +37864,7 @@ }, "uuid": "bc5cb62f-3548-43e0-939e-e7db7bfc678f" }, - "3632": { + "3633": { "varname": "starface_java_memory_usage_timeout", "caption": "Starface Java Memory Usage: Timeout", "description": "Network timeout in seconds.", @@ -37864,7 +37875,7 @@ }, "uuid": "3aadd89c-75d0-4d12-836a-326f14388d03" }, - "3633": { + "3634": { "varname": "starface_java_memory_usage_warning", "caption": "Starface Java Memory Usage: Warning", "description": "WARN threshold in percent.", @@ -37875,7 +37886,7 @@ }, "uuid": "d88cd40e-8b48-4766-b549-4170848439c2" }, - "3634": { + "3635": { "varname": "starface_peer_stats_always_ok", "caption": "Starface Peer Stats: Always OK?", "description": "Always returns OK.", @@ -37884,7 +37895,7 @@ "settings": {}, "uuid": "76219498-69d8-454b-bfbc-87242d3eab80" }, - "3635": { + "3636": { "varname": "starface_peer_stats_cache_expire", "caption": "Starface Peer Stats: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -37895,7 +37906,7 @@ }, "uuid": "3f22b683-d201-4b30-89bf-50e6708a4295" }, - "3636": { + "3637": { "varname": "starface_peer_stats_hostname", "caption": "Starface Peer Stats: Hostname", "description": "Starface PBX hostname or IP address.", @@ -37906,7 +37917,7 @@ }, "uuid": "b78a3116-b052-41df-b0a7-6663d3c613cd" }, - "3637": { + "3638": { "varname": "starface_peer_stats_ipv6", "caption": "Starface Peer Stats: IPv6?", "description": "Use IPv6.", @@ -37915,7 +37926,7 @@ "settings": {}, "uuid": "353c27a6-f9fb-41e3-9695-1072d8ae1a29" }, - "3638": { + "3639": { "varname": "starface_peer_stats_no_perfdata", "caption": "Starface Peer Stats: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -37924,7 +37935,7 @@ "settings": {}, "uuid": "c6bac5e3-b11b-4ffb-a2bf-fdc64f2ba473" }, - "3639": { + "3640": { "varname": "starface_peer_stats_port", "caption": "Starface Peer Stats: Port", "description": "Starface PBX monitoring port.", @@ -37935,7 +37946,7 @@ }, "uuid": "1e3220e5-02cc-46cb-a6fc-5ec7002b375c" }, - "3640": { + "3641": { "varname": "starface_peer_stats_timeout", "caption": "Starface Peer Stats: Timeout", "description": "Network timeout in seconds.", @@ -37946,7 +37957,7 @@ }, "uuid": "e3ff8017-3267-4ee4-847f-e96d40ee2afe" }, - "3641": { + "3642": { "varname": "starface_status_always_ok", "caption": "Starface Status: Always OK?", "description": "Always returns OK.", @@ -37955,7 +37966,7 @@ "settings": {}, "uuid": "c89ee192-ceba-4b7b-b51c-d1849098b961" }, - "3642": { + "3643": { "varname": "starface_status_cache_expire", "caption": "Starface Status: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes.", @@ -37966,7 +37977,7 @@ }, "uuid": "227957f2-2e6a-4fc7-b9f1-263144fe2eb3" }, - "3643": { + "3644": { "varname": "starface_status_critical", "caption": "Starface Status: Critical", "description": "CRIT threshold in percent.", @@ -37977,7 +37988,7 @@ }, "uuid": "01f5ab2d-11b7-4703-ba86-3171915391f3" }, - "3644": { + "3645": { "varname": "starface_status_hostname", "caption": "Starface Status: Hostname", "description": "Starface PBX hostname or IP address.", @@ -37988,7 +37999,7 @@ }, "uuid": "73b92518-044f-4282-8b6e-ddea93818c8d" }, - "3645": { + "3646": { "varname": "starface_status_ipv6", "caption": "Starface Status: IPv6?", "description": "Use IPv6.", @@ -37997,7 +38008,7 @@ "settings": {}, "uuid": "3aee6ba9-a652-4f1a-8373-0f5a3c843481" }, - "3646": { + "3647": { "varname": "starface_status_no_perfdata", "caption": "Starface Status: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -38006,7 +38017,7 @@ "settings": {}, "uuid": "ed121dba-56b0-41fd-8b6f-587d36611e48" }, - "3647": { + "3648": { "varname": "starface_status_port", "caption": "Starface Status: Port", "description": "Starface PBX monitoring port.", @@ -38017,7 +38028,7 @@ }, "uuid": "778359bc-d5a0-4732-a8f7-28a4ca5bbed1" }, - "3648": { + "3649": { "varname": "starface_status_timeout", "caption": "Starface Status: Timeout", "description": "Network timeout in seconds.", @@ -38028,7 +38039,7 @@ }, "uuid": "2f844efa-82ea-4f6a-82dd-5629fb4d7748" }, - "3649": { + "3650": { "varname": "starface_status_warning", "caption": "Starface Status: Warning", "description": "WARN threshold in percent.", @@ -38039,7 +38050,7 @@ }, "uuid": "f504433d-4f5f-4977-a24b-8280ddd9d832" }, - "3650": { + "3651": { "varname": "statusiq_always_ok", "caption": "Statusiq: Always OK?", "description": "Always returns OK.", @@ -38048,7 +38059,7 @@ "settings": {}, "uuid": "c3f078fa-e8db-4c3f-a070-d62d07086f5e" }, - "3651": { + "3652": { "varname": "statusiq_insecure", "caption": "Statusiq: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -38057,7 +38068,7 @@ "settings": {}, "uuid": "e57be994-82a6-4b47-b24a-3dc2455a5f23" }, - "3652": { + "3653": { "varname": "statusiq_no_perfdata", "caption": "Statusiq: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -38066,7 +38077,7 @@ "settings": {}, "uuid": "a01e13a6-1450-4a45-989e-4bf265f001f6" }, - "3653": { + "3654": { "varname": "statusiq_no_proxy", "caption": "Statusiq: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -38075,7 +38086,7 @@ "settings": {}, "uuid": "0b6c13dd-1faf-4035-a80b-7ea71dc095a4" }, - "3654": { + "3655": { "varname": "statusiq_proxy", "caption": "Statusiq: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -38086,7 +38097,7 @@ }, "uuid": "dda05780-f437-41d6-9b93-c27a24b938ef" }, - "3655": { + "3656": { "varname": "statusiq_retries", "caption": "Statusiq: Retries", "description": "Number of extra attempts if the status page does not answer with its feed, before the check gives up. Helps against a status page that intermittently returns an error page or an empty response instead.", @@ -38097,7 +38108,7 @@ }, "uuid": "22f46353-1084-4061-bf4b-84c74e4ec4bc" }, - "3656": { + "3657": { "varname": "statusiq_timeout", "caption": "Statusiq: Timeout", "description": "Network timeout in seconds.", @@ -38108,7 +38119,7 @@ }, "uuid": "fcb1fb7f-dc87-45c5-a055-67f132697f4f" }, - "3657": { + "3658": { "varname": "statusiq_url", "caption": "Statusiq: URL", "description": "StatusIQ status page URL.", @@ -38119,7 +38130,7 @@ }, "uuid": "a5b4e143-c74b-49f6-9ea6-e3d9b55d5553" }, - "3658": { + "3659": { "varname": "statuspal_always_ok", "caption": "Statuspal: Always OK?", "description": "Always returns OK.", @@ -38128,7 +38139,7 @@ "settings": {}, "uuid": "828c1950-96e9-49c9-8ea4-f0ab08c03198" }, - "3659": { + "3660": { "varname": "statuspal_insecure", "caption": "Statuspal: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -38137,7 +38148,7 @@ "settings": {}, "uuid": "1a92202d-afb7-4d9a-be98-5ad7334004d4" }, - "3660": { + "3661": { "varname": "statuspal_no_perfdata", "caption": "Statuspal: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -38146,7 +38157,7 @@ "settings": {}, "uuid": "e1ae6001-fae1-4709-bc16-c4b28f4d43f3" }, - "3661": { + "3662": { "varname": "statuspal_no_proxy", "caption": "Statuspal: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -38155,7 +38166,7 @@ "settings": {}, "uuid": "a05b85c1-aea8-4723-adcd-50200c2a0229" }, - "3662": { + "3663": { "varname": "statuspal_proxy", "caption": "Statuspal: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -38166,7 +38177,7 @@ }, "uuid": "9e06e1b7-622b-47e2-9eb9-803d342df837" }, - "3663": { + "3664": { "varname": "statuspal_timeout", "caption": "Statuspal: Timeout", "description": "Network timeout in seconds.", @@ -38177,7 +38188,7 @@ }, "uuid": "dfab5f87-db79-43f2-97b8-9cb0c5e4f3d5" }, - "3664": { + "3665": { "varname": "statuspal_url", "caption": "Statuspal: URL", "description": "Statuspal API URL pointing to the summary endpoint.", @@ -38188,7 +38199,7 @@ }, "uuid": "610d0458-53e2-440a-89ab-93e8ab4a6893" }, - "3665": { + "3666": { "varname": "strongswan_connections_always_ok", "caption": "Strongswan Connections: Always OK?", "description": "Always returns OK.", @@ -38197,7 +38208,7 @@ "settings": {}, "uuid": "584d20e3-6a37-49bd-8775-e659107932ea" }, - "3666": { + "3667": { "varname": "strongswan_connections_ignore", "caption": "Strongswan Connections: Ignore", "description": "Ignore connections whose VICI key matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. Example: `--ignore=\"^RA_\"` to skip transient remote-access clients on a VPN gateway that also carries permanent site-to-site peers. Example: `--ignore=\"(?i)test\"` (case-insensitive) to skip any connection with \"test\" in its name.", @@ -38208,7 +38219,7 @@ }, "uuid": "aa407e77-234d-4bd0-ace0-81c21fe71a9d" }, - "3667": { + "3668": { "varname": "strongswan_connections_lengthy", "caption": "Strongswan Connections: Lengthy?", "description": "Extended reporting.", @@ -38217,7 +38228,7 @@ "settings": {}, "uuid": "a59704e1-8a80-4f5a-a8f5-e7ed09ef73ab" }, - "3668": { + "3669": { "varname": "strongswan_connections_match", "caption": "Strongswan Connections: Match", "description": "Only check connections whose VICI key matches this Python regular expression. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Example: `--match=\"^S2S_SITE-XY$\"` to pin an Icinga service to one specific site-to-site peer. Example: `--match=\"(?i)^s2s_\"` (case-insensitive) to check every site-to-site peer on a gateway.", @@ -38228,7 +38239,7 @@ }, "uuid": "003dbb6e-6dd0-40f7-892c-e61871dd5e7c" }, - "3669": { + "3670": { "varname": "strongswan_connections_no_perfdata", "caption": "Strongswan Connections: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -38237,7 +38248,7 @@ "settings": {}, "uuid": "21647116-78c6-4dab-b6a8-a1a785e9fdaf" }, - "3670": { + "3671": { "varname": "strongswan_connections_socket", "caption": "Strongswan Connections: Socket", "description": "Path to the Versatile IKE Control Interface (VICI) socket. Must resolve within /run or /var/run, and nobody but root may be able to replace it.", @@ -38248,7 +38259,7 @@ }, "uuid": "dfb9fc01-b4e7-46cc-bc83-66324da1628e" }, - "3671": { + "3672": { "varname": "strongswan_connections_timeout", "caption": "Strongswan Connections: Timeout", "description": "Network timeout in seconds.", @@ -38259,7 +38270,7 @@ }, "uuid": "1477a543-e937-40a0-b419-7918b8d16407" }, - "3672": { + "3673": { "varname": "swap_usage_always_ok", "caption": "Swap Usage: Always OK?", "description": "Always returns OK.", @@ -38268,7 +38279,7 @@ "settings": {}, "uuid": "40904a35-5a61-4d4c-94ba-4d036b6183f2" }, - "3673": { + "3674": { "varname": "swap_usage_critical", "caption": "Swap Usage: Critical", "description": "CRIT threshold for swap usage in percent. Supports Nagios ranges.", @@ -38279,7 +38290,7 @@ }, "uuid": "06ff088c-6a20-4d7c-a2cd-e853740d4d7a" }, - "3674": { + "3675": { "varname": "swap_usage_no_perfdata", "caption": "Swap Usage: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -38288,7 +38299,7 @@ "settings": {}, "uuid": "82fc8de6-74bd-4db6-b219-23df7ecc643a" }, - "3675": { + "3676": { "varname": "swap_usage_severity_no_swap", "caption": "Swap Usage: Severity No Swap", "description": "Severity for alerting if no swap is configured.", @@ -38301,7 +38312,7 @@ }, "uuid": "a3d33372-e998-48f1-b594-d0604df219f1" }, - "3676": { + "3677": { "varname": "swap_usage_top", "caption": "Swap Usage: Top", "description": "Number of top processes consuming the most swap space to list (not available on Windows).", @@ -38312,7 +38323,7 @@ }, "uuid": "e310bfe0-6eee-41c1-8d53-7044e4f128fc" }, - "3677": { + "3678": { "varname": "swap_usage_warning", "caption": "Swap Usage: Warning", "description": "WARN threshold for swap usage in percent. Supports Nagios ranges.", @@ -38323,7 +38334,7 @@ }, "uuid": "dd0c4593-8faf-4ebc-901b-6c7025483143" }, - "3678": { + "3679": { "varname": "swap_usage_windows_always_ok", "caption": "Swap Usage: Always OK?", "description": "Always returns OK.", @@ -38332,7 +38343,7 @@ "settings": {}, "uuid": "31890764-645c-4a8f-9de7-0086e31e66f7" }, - "3679": { + "3680": { "varname": "swap_usage_windows_critical", "caption": "Swap Usage: Critical", "description": "CRIT threshold for swap usage in percent. Supports Nagios ranges.", @@ -38343,7 +38354,7 @@ }, "uuid": "6876e2d9-8cf4-4511-be68-9f7dfc7aa273" }, - "3680": { + "3681": { "varname": "swap_usage_windows_no_perfdata", "caption": "Swap Usage: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -38352,7 +38363,7 @@ "settings": {}, "uuid": "e2cddb07-6930-4983-8760-1c4a1fc9905b" }, - "3681": { + "3682": { "varname": "swap_usage_windows_severity_no_swap", "caption": "Swap Usage: Severity No Swap", "description": "Severity for alerting if no swap is configured.", @@ -38365,7 +38376,7 @@ }, "uuid": "169c202a-99d0-4290-97d0-e0f11939ee74" }, - "3682": { + "3683": { "varname": "swap_usage_windows_top", "caption": "Swap Usage: Top", "description": "Number of top processes consuming the most swap space to list (not available on Windows).", @@ -38376,7 +38387,7 @@ }, "uuid": "3f02a0e9-7453-4d56-bc9e-4c29e1ad6879" }, - "3683": { + "3684": { "varname": "swap_usage_windows_warning", "caption": "Swap Usage: Warning", "description": "WARN threshold for swap usage in percent. Supports Nagios ranges.", @@ -38387,7 +38398,7 @@ }, "uuid": "6aa1a348-15eb-411b-8afb-153931a64872" }, - "3684": { + "3685": { "varname": "systemd_timedate_status_always_ok", "caption": "Systemd Timedate Status: Always OK?", "description": "Always returns OK.", @@ -38396,7 +38407,7 @@ "settings": {}, "uuid": "da57ea5c-3448-46bb-8087-4ce9690064fd" }, - "3685": { + "3686": { "varname": "systemd_timedate_status_timeout", "caption": "Systemd Timedate Status: Timeout", "description": "Network timeout in seconds.", @@ -38407,7 +38418,7 @@ }, "uuid": "61b04390-18a1-434f-9f95-ef509e8bed47" }, - "3686": { + "3687": { "varname": "systemd_unit_activestate", "caption": "Systemd Unit: Activestate", "description": "Expected systemd ActiveState (high-level unit activation state, i.e. generalization of SUB). Can be specified multiple times. If omitted or set to \"None\", the unit's active state will not be checked.", @@ -38420,7 +38431,7 @@ }, "uuid": "94a52ec4-ba17-4975-9fc3-f3b081db6b95" }, - "3687": { + "3688": { "varname": "systemd_unit_always_ok", "caption": "Systemd Unit: Always OK?", "description": "Always returns OK.", @@ -38429,7 +38440,7 @@ "settings": {}, "uuid": "a7ffab73-dd72-458c-8c89-6559efa26a75" }, - "3688": { + "3689": { "varname": "systemd_unit_loadstate", "caption": "Systemd Unit: Loadstate", "description": "Expected systemd LoadState, reflecting whether the unit definition was properly loaded. If omitted or set to \"None\", the unit's load state will not be checked.", @@ -38442,7 +38453,7 @@ }, "uuid": "52984dff-232b-4bf9-b627-e9215b046483" }, - "3689": { + "3690": { "varname": "systemd_unit_machine", "caption": "Systemd Unit: Machine", "description": "Execute operation on a local container. Specify the name of the container to connect to. A user name prefix (`user@container`) is not accepted. Example: `--machine=mycontainer`.", @@ -38453,7 +38464,7 @@ }, "uuid": "2fb4b9db-9e55-486e-bf4d-1fc57241cbc8" }, - "3690": { + "3691": { "varname": "systemd_unit_severity", "caption": "Systemd Unit: Severity", "description": "Severity for alerting.", @@ -38466,7 +38477,7 @@ }, "uuid": "6a074f34-081c-4f4d-a8d2-871d0b83fc07" }, - "3691": { + "3692": { "varname": "systemd_unit_substate", "caption": "Systemd Unit: Substate", "description": "Expected systemd SubState (low-level unit activation state; values depend on unit type). Can be specified multiple times. If omitted or set to \"None\", the unit's substate will not be checked.", @@ -38479,7 +38490,7 @@ }, "uuid": "8dd61646-5d92-4378-9097-a3f124fca4f4" }, - "3692": { + "3693": { "varname": "systemd_unit_unit", "caption": "Systemd Unit: Unit", "description": "Systemd unit name to check (service, timer, mount, etc.). Required. Example: `--unit=sshd.service`.", @@ -38490,7 +38501,7 @@ }, "uuid": "499e53dc-746c-4194-92c0-c0e0f725e872" }, - "3693": { + "3694": { "varname": "systemd_unit_unitfilestate", "caption": "Systemd Unit: Unitfilestate", "description": "Expected systemd UnitFileState. If set to \"empty\", checks exactly for `UnitFileState=\"\"`. If omitted or set to \"None\", the unit's unit-file state will not be checked.", @@ -38503,7 +38514,7 @@ }, "uuid": "83015b7c-4f1d-41e6-ab44-fc0ed649f813" }, - "3694": { + "3695": { "varname": "systemd_unit_user", "caption": "Systemd Unit: User?", "description": "Talk to the service manager of the calling user rather than the service manager of the system.", @@ -38512,7 +38523,7 @@ "settings": {}, "uuid": "bc1e6272-2008-47f9-8226-b4042cd57d20" }, - "3695": { + "3696": { "varname": "systemd_units_failed_always_ok", "caption": "Systemd Units Failed: Always OK?", "description": "Always returns OK.", @@ -38521,7 +38532,7 @@ "settings": {}, "uuid": "87f78746-3582-4cf5-a68a-4d3fbd120f95" }, - "3696": { + "3697": { "varname": "systemd_units_failed_ignore", "caption": "Systemd Units Failed: Ignore", "description": "Unit name to exclude from the check. Supports glob patterns according to https://docs.python.org/3/library/fnmatch.html. Case-sensitive. Can be specified multiple times. Example: `--ignore=dhcpd.service`.", @@ -38532,7 +38543,7 @@ }, "uuid": "447234a9-2c7c-459d-9608-068f40242d50" }, - "3697": { + "3698": { "varname": "systemd_units_failed_no_perfdata", "caption": "Systemd Units Failed: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -38541,7 +38552,7 @@ "settings": {}, "uuid": "6e3628b6-9552-44c6-8039-a8a5e775aaf2" }, - "3698": { + "3699": { "varname": "tuned_profile_always_ok", "caption": "Tuned Profile: Always OK?", "description": "Always returns OK.", @@ -38550,7 +38561,7 @@ "settings": {}, "uuid": "6af7c6e8-9590-4690-aa49-6c156c94f1ac" }, - "3699": { + "3700": { "varname": "tuned_profile_profile", "caption": "Tuned Profile: Profile", "description": "Expected tuned profile name. Case-insensitive. Example: `--profile=virtual-guest`.", @@ -38561,7 +38572,7 @@ }, "uuid": "b7f5a8c4-4367-477f-a01b-2e8d37e86176" }, - "3700": { + "3701": { "varname": "tuned_profile_timeout", "caption": "Tuned Profile: Timeout", "description": "Network timeout in seconds.", @@ -38572,7 +38583,7 @@ }, "uuid": "47362be2-1881-4629-a8e5-e1dffab44871" }, - "3701": { + "3702": { "varname": "updates_windows_always_ok", "caption": "Updates: Always OK?", "description": "Always returns OK.", @@ -38581,7 +38592,7 @@ "settings": {}, "uuid": "dc7f7931-90f3-42bf-a10d-43684cf76c4c" }, - "3702": { + "3703": { "varname": "updates_windows_critical", "caption": "Updates: Critical", "description": "Threshold for the number of pending updates.", @@ -38592,7 +38603,7 @@ }, "uuid": "9188240c-b08e-450a-bb30-3388c215f68d" }, - "3703": { + "3704": { "varname": "updates_windows_no_perfdata", "caption": "Updates: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -38601,7 +38612,7 @@ "settings": {}, "uuid": "dd1bf8e3-527a-459c-8371-35de3ee770af" }, - "3704": { + "3705": { "varname": "updates_windows_timeout", "caption": "Updates: Timeout", "description": "Network timeout in seconds.", @@ -38612,7 +38623,7 @@ }, "uuid": "50f2dcee-1051-4f0f-aebc-fe6c4ed7a920" }, - "3705": { + "3706": { "varname": "updates_windows_warning", "caption": "Updates: Warning", "description": "Threshold for the number of pending updates.", @@ -38623,7 +38634,7 @@ }, "uuid": "76912128-e786-4747-877a-7458d3441d04" }, - "3706": { + "3707": { "varname": "ups_nut_always_ok", "caption": "Ups Nut: Always OK?", "description": "Always returns OK.", @@ -38632,7 +38643,7 @@ "settings": {}, "uuid": "d9dcf2ed-0d41-4692-8e3f-2e75735dd907" }, - "3707": { + "3708": { "varname": "ups_nut_critical_charge", "caption": "Ups Nut: Critical Charge", "description": "CRIT threshold for battery charge in percent. When omitted, the plugin prefers the UPS-reported `battery.charge.low` (which is the level at which the UPS itself triggers the LB flag). Falls back to '10:' if neither the UPS nor the admin configured a value. Supports Nagios ranges.", @@ -38643,7 +38654,7 @@ }, "uuid": "f9daa349-d92d-4a91-82bc-b284aaaabec0" }, - "3708": { + "3709": { "varname": "ups_nut_critical_load", "caption": "Ups Nut: Critical Load", "description": "CRIT threshold for UPS load in percent. Supports Nagios ranges.", @@ -38654,7 +38665,7 @@ }, "uuid": "e5566d4e-6d58-404d-8f97-9fe91dcbbb1e" }, - "3709": { + "3710": { "varname": "ups_nut_critical_runtime", "caption": "Ups Nut: Critical Runtime", "description": "CRIT threshold for remaining battery runtime in seconds. When omitted, the plugin prefers the UPS-reported `battery.runtime.low` (which is the runtime at which the UPS itself triggers the LB flag). Falls back to '300:' if neither the UPS nor the admin configured a value. Supports Nagios ranges.", @@ -38665,7 +38676,7 @@ }, "uuid": "3b8cf1af-3210-43d5-8289-238711160cae" }, - "3710": { + "3711": { "varname": "ups_nut_critical_temperature", "caption": "Ups Nut: Critical Temperature", "description": "CRIT threshold for UPS temperature in degrees Celsius. Supports Nagios ranges.", @@ -38676,7 +38687,7 @@ }, "uuid": "e61a0b57-6966-4386-a5a6-0301f43134bc" }, - "3711": { + "3712": { "varname": "ups_nut_device", "caption": "Ups Nut: Device", "description": "UPS device name as configured in NUT (matches the [section] in ups.conf). If omitted, the plugin queries upsd for the configured UPS list and picks the first entry, which is the right thing to do on the typical single-UPS setup. On hosts with more than one configured UPS the picked name is mentioned in the plugin output so the admin notices and can pin the choice via --device.", @@ -38687,7 +38698,7 @@ }, "uuid": "cd53c48f-df51-4e1b-b285-ac0b9f69b5e4" }, - "3712": { + "3713": { "varname": "ups_nut_hostname", "caption": "Ups Nut: Hostname", "description": "Hostname or IP address.", @@ -38698,7 +38709,7 @@ }, "uuid": "3bf5d757-4899-4035-ac9a-853b462ef17d" }, - "3713": { + "3714": { "varname": "ups_nut_lengthy", "caption": "Ups Nut: Lengthy?", "description": "Extended reporting.", @@ -38707,7 +38718,7 @@ "settings": {}, "uuid": "dc3c24ce-2784-4c20-9d22-f9c32a411a89" }, - "3714": { + "3715": { "varname": "ups_nut_no_perfdata", "caption": "Ups Nut: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -38716,7 +38727,7 @@ "settings": {}, "uuid": "c74f9aee-9d9a-4d96-be27-2026221d0f9c" }, - "3715": { + "3716": { "varname": "ups_nut_password", "caption": "Ups Nut: Password", "description": "Password.", @@ -38727,7 +38738,7 @@ }, "uuid": "8e6e13d4-2a48-43d7-9008-7977e0c99deb" }, - "3716": { + "3717": { "varname": "ups_nut_port", "caption": "Ups Nut: Port", "description": "Port number.", @@ -38738,7 +38749,7 @@ }, "uuid": "f2d460b9-e000-4e26-b76c-dd5e5c678009" }, - "3717": { + "3718": { "varname": "ups_nut_timeout", "caption": "Ups Nut: Timeout", "description": "Network timeout in seconds.", @@ -38749,7 +38760,7 @@ }, "uuid": "b382fecd-fce8-40aa-abda-9f34ae5ce187" }, - "3718": { + "3719": { "varname": "ups_nut_username", "caption": "Ups Nut: Username", "description": "Username.", @@ -38760,7 +38771,7 @@ }, "uuid": "1f91e064-7c80-4358-bca1-97dae74f074d" }, - "3719": { + "3720": { "varname": "ups_nut_warning_charge", "caption": "Ups Nut: Warning Charge", "description": "WARN threshold for battery charge in percent. When omitted, the plugin prefers the UPS-reported `battery.charge.warning`. Falls back to '30:' if neither the UPS nor the admin configured a value. Supports Nagios ranges.", @@ -38771,7 +38782,7 @@ }, "uuid": "baa8fe32-0f34-465e-b593-102213470996" }, - "3720": { + "3721": { "varname": "ups_nut_warning_load", "caption": "Ups Nut: Warning Load", "description": "WARN threshold for UPS load in percent. Supports Nagios ranges.", @@ -38782,7 +38793,7 @@ }, "uuid": "dea631c3-9f3f-4f22-aeb2-e82c15a43b46" }, - "3721": { + "3722": { "varname": "ups_nut_warning_runtime", "caption": "Ups Nut: Warning Runtime", "description": "WARN threshold for remaining battery runtime in seconds. Supports Nagios ranges.", @@ -38793,7 +38804,7 @@ }, "uuid": "6a3619cf-7050-46d2-9218-987ff069d2ff" }, - "3722": { + "3723": { "varname": "ups_nut_warning_temperature", "caption": "Ups Nut: Warning Temperature", "description": "WARN threshold for UPS temperature in degrees Celsius. Supports Nagios ranges.", @@ -38804,7 +38815,7 @@ }, "uuid": "af9da51b-9cd7-44c0-9ba5-c0e4d0887222" }, - "3723": { + "3724": { "varname": "uptime_always_ok", "caption": "Uptime: Always OK?", "description": "Always returns OK.", @@ -38813,7 +38824,7 @@ "settings": {}, "uuid": "0edbc7d6-14e0-4a10-8678-15829c304d7b" }, - "3724": { + "3725": { "varname": "uptime_critical", "caption": "Uptime: Critical", "description": "Threshold for the uptime in a human-readable format (s = seconds, m = minutes, h = hours, D = days, W = weeks, M = months, Y = years). Supports Nagios ranges. Example: `:1Y` alerts if uptime is greater than 1 year.", @@ -38824,7 +38835,7 @@ }, "uuid": "12e5f57e-072c-456e-becf-0df633a0f690" }, - "3725": { + "3726": { "varname": "uptime_no_perfdata", "caption": "Uptime: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -38833,7 +38844,7 @@ "settings": {}, "uuid": "6a16becc-ec01-4d9a-aef0-c051ff752cb5" }, - "3726": { + "3727": { "varname": "uptime_warning", "caption": "Uptime: Warning", "description": "Threshold for the uptime in a human-readable format (s = seconds, m = minutes, h = hours, D = days, W = weeks, M = months, Y = years). Supports Nagios ranges. Example: `5m:180D` warns if uptime is not between 5 minutes and 180 days.", @@ -38844,7 +38855,7 @@ }, "uuid": "c6a9f9a1-a699-412d-9f40-522f6a951cee" }, - "3727": { + "3728": { "varname": "uptime_windows_always_ok", "caption": "Uptime: Always OK?", "description": "Always returns OK.", @@ -38853,7 +38864,7 @@ "settings": {}, "uuid": "2919785a-cbc4-49b6-ad5b-90e359dc0139" }, - "3728": { + "3729": { "varname": "uptime_windows_critical", "caption": "Uptime: Critical", "description": "Threshold for the uptime in a human-readable format (s = seconds, m = minutes, h = hours, D = days, W = weeks, M = months, Y = years). Supports Nagios ranges. Example: `:1Y` alerts if uptime is greater than 1 year.", @@ -38864,7 +38875,7 @@ }, "uuid": "34841eea-03fa-4b21-b425-043dfa13db21" }, - "3729": { + "3730": { "varname": "uptime_windows_no_perfdata", "caption": "Uptime: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -38873,7 +38884,7 @@ "settings": {}, "uuid": "366ba34b-0678-4bf5-a14f-63eb90f39332" }, - "3730": { + "3731": { "varname": "uptime_windows_warning", "caption": "Uptime: Warning", "description": "Threshold for the uptime in a human-readable format (s = seconds, m = minutes, h = hours, D = days, W = weeks, M = months, Y = years). Supports Nagios ranges. Example: `5m:180D` warns if uptime is not between 5 minutes and 180 days.", @@ -38884,7 +38895,7 @@ }, "uuid": "65c393e2-8732-4e00-b4bd-a1a254678a3b" }, - "3731": { + "3732": { "varname": "uptimerobot_always_ok", "caption": "Uptimerobot: Always OK?", "description": "Always returns OK.", @@ -38893,7 +38904,7 @@ "settings": {}, "uuid": "2e3bf7ae-194b-4bcc-aadf-11dd4ad66e42" }, - "3732": { + "3733": { "varname": "uptimerobot_insecure", "caption": "Uptimerobot: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -38902,7 +38913,7 @@ "settings": {}, "uuid": "da7270ef-52c6-4b95-b6c5-210d3f153f7a" }, - "3733": { + "3734": { "varname": "uptimerobot_no_perfdata", "caption": "Uptimerobot: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -38911,7 +38922,7 @@ "settings": {}, "uuid": "9eb96bf3-ab7f-4127-899c-13b6b7c62784" }, - "3734": { + "3735": { "varname": "uptimerobot_no_proxy", "caption": "Uptimerobot: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -38920,7 +38931,7 @@ "settings": {}, "uuid": "890200bc-45bb-4159-a441-c87dfaca52fa" }, - "3735": { + "3736": { "varname": "uptimerobot_proxy", "caption": "Uptimerobot: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -38931,7 +38942,7 @@ }, "uuid": "a49ae19e-8ad4-4402-82ac-8409657add03" }, - "3736": { + "3737": { "varname": "uptimerobot_timeout", "caption": "Uptimerobot: Timeout", "description": "Network timeout in seconds.", @@ -38942,7 +38953,7 @@ }, "uuid": "d9110461-ccca-4df9-9246-e523da090514" }, - "3737": { + "3738": { "varname": "uptimerobot_url", "caption": "Uptimerobot: URL", "description": "UptimeRobot status page URL.", @@ -38953,7 +38964,7 @@ }, "uuid": "9cece61f-86be-4326-9070-29b89f82d998" }, - "3738": { + "3739": { "varname": "users_always_ok", "caption": "Users: Always OK?", "description": "Always returns OK.", @@ -38962,7 +38973,7 @@ "settings": {}, "uuid": "ef6a6f4e-a933-4a90-a91d-64c9a6e2651c" }, - "3739": { + "3740": { "varname": "users_critical", "caption": "Users: Critical", "description": "Threshold for the number of tty and pts sessions, in the format \"tty,pts\". Both values are required, `None` leaves a threshold out. On Windows, you can additionally specify a threshold for disconnected sessions in the format \"tty,pts,disc\". Alerts when the number reaches the threshold. Example: `--critical=3,10`.", @@ -38973,7 +38984,7 @@ }, "uuid": "80d593b3-e40e-46ac-a82a-35a0b2ddf300" }, - "3740": { + "3741": { "varname": "users_no_perfdata", "caption": "Users: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -38982,7 +38993,7 @@ "settings": {}, "uuid": "23793d46-5117-4b9e-88d4-c8a653cec454" }, - "3741": { + "3742": { "varname": "users_warning", "caption": "Users: Warning", "description": "Threshold for the number of tty and pts sessions, in the format \"tty,pts\". Both values are required, `None` leaves a threshold out. On Windows, you can additionally specify a threshold for disconnected sessions in the format \"tty,pts,disc\". Alerts when the number reaches the threshold. Example: `--warning=1,5`.", @@ -38993,7 +39004,7 @@ }, "uuid": "aab00f82-f7f2-4cec-87a4-bb0593497959" }, - "3742": { + "3743": { "varname": "users_windows_always_ok", "caption": "Users: Always OK?", "description": "Always returns OK.", @@ -39002,7 +39013,7 @@ "settings": {}, "uuid": "74f9a2da-d83a-4660-91ea-38f573733357" }, - "3743": { + "3744": { "varname": "users_windows_critical", "caption": "Users: Critical", "description": "Threshold for the number of tty and pts sessions, in the format \"tty,pts\". Both values are required, `None` leaves a threshold out. On Windows, you can additionally specify a threshold for disconnected sessions in the format \"tty,pts,disc\". Alerts when the number reaches the threshold. Example: `--critical=3,10`.", @@ -39013,7 +39024,7 @@ }, "uuid": "4da14e03-68e0-49d8-9855-af0dadaf23a3" }, - "3744": { + "3745": { "varname": "users_windows_no_perfdata", "caption": "Users: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -39022,7 +39033,7 @@ "settings": {}, "uuid": "6f417810-7039-4a63-befe-425b5d58916d" }, - "3745": { + "3746": { "varname": "users_windows_warning", "caption": "Users: Warning", "description": "Threshold for the number of tty and pts sessions, in the format \"tty,pts\". Both values are required, `None` leaves a threshold out. On Windows, you can additionally specify a threshold for disconnected sessions in the format \"tty,pts,disc\". Alerts when the number reaches the threshold. Example: `--warning=1,5`.", @@ -39033,7 +39044,7 @@ }, "uuid": "fc9fb2cf-4be7-479e-bfea-4b65d3286bc9" }, - "3746": { + "3747": { "varname": "valkey_status_always_ok", "caption": "Valkey Status: Always OK?", "description": "Always returns OK.", @@ -39042,7 +39053,7 @@ "settings": {}, "uuid": "272eefa0-8b0f-44c0-8e7b-e5defb0a7dad" }, - "3747": { + "3748": { "varname": "valkey_status_cacert", "caption": "Valkey Status: Cacert", "description": "CA certificate file for TLS verification. Requires `--tls`.", @@ -39053,7 +39064,7 @@ }, "uuid": "807733d5-9cee-4c70-8e17-1700582118b5" }, - "3748": { + "3749": { "varname": "valkey_status_critical", "caption": "Valkey Status: Critical", "description": "CRIT threshold for memory usage as a percentage.", @@ -39064,7 +39075,7 @@ }, "uuid": "774f6755-5dce-4c0c-9a96-7201960f4368" }, - "3749": { + "3750": { "varname": "valkey_status_hostname", "caption": "Valkey Status: Hostname", "description": "Valkey server hostname.", @@ -39075,7 +39086,7 @@ }, "uuid": "13de4d7f-383a-4513-929c-1c0a7186ca81" }, - "3750": { + "3751": { "varname": "valkey_status_ignore_maxmemory0", "caption": "Valkey Status: Ignore Maxmemory0?", "description": "Suppress the warning when Valkey maxmemory is set to 0 (unlimited).", @@ -39084,7 +39095,7 @@ "settings": {}, "uuid": "4d605485-4cb0-41ca-9dde-cc67c00d3717" }, - "3751": { + "3752": { "varname": "valkey_status_ignore_overcommit", "caption": "Valkey Status: Ignore Overcommit?", "description": "Suppress the warning when vm.overcommit_memory is not set to 1.", @@ -39093,7 +39104,7 @@ "settings": {}, "uuid": "135bc79d-8f22-4824-84f9-092583567b3e" }, - "3752": { + "3753": { "varname": "valkey_status_ignore_somaxconn", "caption": "Valkey Status: Ignore Somaxconn?", "description": "Suppress the warning when net.core.somaxconn is lower than net.ipv4.tcp_max_syn_backlog.", @@ -39102,7 +39113,7 @@ "settings": {}, "uuid": "abcd27f1-dc3f-4cd0-a1bd-7b11496dc044" }, - "3753": { + "3754": { "varname": "valkey_status_ignore_sync_partial_err", "caption": "Valkey Status: Ignore Sync Partial Err?", "description": "Suppress the warning when replicas were denied a partial resync since the last check and fell back to a full sync.", @@ -39111,7 +39122,7 @@ "settings": {}, "uuid": "7eb384ca-8b5b-4f95-92cb-a166a6658067" }, - "3754": { + "3755": { "varname": "valkey_status_ignore_thp", "caption": "Valkey Status: Ignore Thp?", "description": "Suppress the warning about transparent huge pages being set to \"always\".", @@ -39120,7 +39131,7 @@ "settings": {}, "uuid": "f6c2058f-6273-4f39-9a20-dfd266cdbd3c" }, - "3755": { + "3756": { "varname": "valkey_status_no_perfdata", "caption": "Valkey Status: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -39129,7 +39140,7 @@ "settings": {}, "uuid": "53454b53-4268-4f2f-8390-db0aafc2a05d" }, - "3756": { + "3757": { "varname": "valkey_status_password", "caption": "Valkey Status: Password", "description": "Password for Valkey server authentication.", @@ -39140,7 +39151,7 @@ }, "uuid": "ff5ecf96-7e71-461b-962f-5ae418966e56" }, - "3757": { + "3758": { "varname": "valkey_status_port", "caption": "Valkey Status: Port", "description": "Valkey server port.", @@ -39151,7 +39162,7 @@ }, "uuid": "66198db2-4e9d-4854-9b70-d8beb8926de3" }, - "3758": { + "3759": { "varname": "valkey_status_socket", "caption": "Valkey Status: Socket", "description": "Valkey server Unix socket path. Overrides --hostname and --port.", @@ -39162,7 +39173,7 @@ }, "uuid": "929f1232-18b7-4879-a1ab-789526165bea" }, - "3759": { + "3760": { "varname": "valkey_status_timeout", "caption": "Valkey Status: Timeout", "description": "Network timeout in seconds.", @@ -39173,7 +39184,7 @@ }, "uuid": "c4cf054a-d83c-43dc-88b0-08fc00792a24" }, - "3760": { + "3761": { "varname": "valkey_status_tls", "caption": "Valkey Status: TLS?", "description": "Establish a secure TLS connection to Valkey.", @@ -39182,7 +39193,7 @@ "settings": {}, "uuid": "23fb86ca-6e8b-4916-86d1-eec30769f322" }, - "3761": { + "3762": { "varname": "valkey_status_username", "caption": "Valkey Status: Username", "description": "Username for Valkey server authentication.", @@ -39193,7 +39204,7 @@ }, "uuid": "123dc970-0157-45a3-bd4c-bbad5f6891f5" }, - "3762": { + "3763": { "varname": "valkey_status_verbose", "caption": "Valkey Status: Verbose?", "description": "Makes this plugin verbose during the operation. Useful for debugging and seeing what is going on under the hood.", @@ -39202,7 +39213,7 @@ "settings": {}, "uuid": "a1fe5380-27d3-416e-bd3d-0439958d5153" }, - "3763": { + "3764": { "varname": "valkey_status_warning", "caption": "Valkey Status: Warning", "description": "WARN threshold for memory usage as a percentage.", @@ -39213,7 +39224,7 @@ }, "uuid": "188c7f6c-ce71-4fc9-9dab-7d628c2ecbfe" }, - "3764": { + "3765": { "varname": "valkey_version_always_ok", "caption": "Valkey Version: Always OK?", "description": "Always returns OK.", @@ -39222,7 +39233,7 @@ "settings": {}, "uuid": "20a2a297-9058-46ef-903f-ce61ea0773f5" }, - "3765": { + "3766": { "varname": "valkey_version_check_major", "caption": "Valkey Version: Check Major?", "description": "Alert when a new major release is available, even if the current version is not yet EOL. Example: running v26 (not yet EOL) and v27 is available.", @@ -39231,7 +39242,7 @@ "settings": {}, "uuid": "1b30e321-85c8-4667-b794-18ac5ffc691b" }, - "3766": { + "3767": { "varname": "valkey_version_check_minor", "caption": "Valkey Version: Check Minor?", "description": "Alert when a new major.minor release is available, even if the current version is not yet EOL. Example: running v26.2 (not yet EOL) and v26.3 is available.", @@ -39240,7 +39251,7 @@ "settings": {}, "uuid": "30811d6a-3acd-4bf3-ad75-e884b12f1be1" }, - "3767": { + "3768": { "varname": "valkey_version_check_patch", "caption": "Valkey Version: Check Patch?", "description": "Alert when a new major.minor.patch release is available, even if the current version is not yet EOL. Example: running v26.2.7 (not yet EOL) and v26.2.8 is available.", @@ -39249,7 +39260,7 @@ "settings": {}, "uuid": "ab4378a4-f8ca-43cd-abcf-1d105a701b23" }, - "3768": { + "3769": { "varname": "valkey_version_insecure", "caption": "Valkey Version: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -39258,7 +39269,7 @@ "settings": {}, "uuid": "3aedd15f-c50f-4d53-8aea-b8cf27ae4c8c" }, - "3769": { + "3770": { "varname": "valkey_version_no_perfdata", "caption": "Valkey Version: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -39267,7 +39278,7 @@ "settings": {}, "uuid": "98227d0e-349e-46cd-ad9e-0ee1edc744ba" }, - "3770": { + "3771": { "varname": "valkey_version_no_proxy", "caption": "Valkey Version: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -39276,7 +39287,7 @@ "settings": {}, "uuid": "97f76748-eedd-4806-91b1-ef13175d6cae" }, - "3771": { + "3772": { "varname": "valkey_version_offset_eol", "caption": "Valkey Version: Offset Eol", "description": "Alert n days before (\"-30\") or after an EOL date (\"30\" or \"+30\").", @@ -39287,7 +39298,7 @@ }, "uuid": "a7f4686a-05b4-4452-ac09-74a60fd3d3e0" }, - "3772": { + "3773": { "varname": "valkey_version_path", "caption": "Valkey Version: Path", "description": "Path to the Valkey binary. Resolved via $PATH when given without a directory.", @@ -39298,7 +39309,7 @@ }, "uuid": "25cb1cfe-f460-4049-9e56-5828269dc077" }, - "3773": { + "3774": { "varname": "valkey_version_proxy", "caption": "Valkey Version: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -39309,7 +39320,7 @@ }, "uuid": "c3e4a815-1bde-4167-9789-28e02c17f7a7" }, - "3774": { + "3775": { "varname": "valkey_version_timeout", "caption": "Valkey Version: Timeout", "description": "Network timeout in seconds.", @@ -39320,7 +39331,7 @@ }, "uuid": "ac217f81-5ebf-45bd-9723-3c94310cd782" }, - "3775": { + "3776": { "varname": "valkey_version_unreachable_severity", "caption": "Valkey Version: Unreachable Severity", "description": "State to report when the online source is unreachable. What is used instead - bundled offline data, a cached copy, or nothing at all - is named in the output, and a clean result then only covers what that fallback could confirm.", @@ -39333,7 +39344,7 @@ }, "uuid": "d019b147-3ef8-4631-8089-8d2d51182b6b" }, - "3776": { + "3777": { "varname": "veeam_status_always_ok", "caption": "Veeam Status: Always OK?", "description": "Always returns OK.", @@ -39342,7 +39353,7 @@ "settings": {}, "uuid": "8424ac5b-e0ee-4398-afb1-046298a29706" }, - "3777": { + "3778": { "varname": "veeam_status_critical", "caption": "Veeam Status: Critical", "description": "CRIT threshold for backup repository usage as a percentage.", @@ -39353,7 +39364,7 @@ }, "uuid": "e09d3854-91e9-4343-946f-67704cca5e45" }, - "3778": { + "3779": { "varname": "veeam_status_failed_job_runs", "caption": "Veeam Status: Failed Job Runs", "description": "Veeam threshold for `FailedJobRuns`.", @@ -39364,7 +39375,7 @@ }, "uuid": "4bb25d51-9b8e-40ce-9dca-026caefa3438" }, - "3779": { + "3780": { "varname": "veeam_status_failed_vm_lastest_states", "caption": "Veeam Status: Failed VM Lastest States", "description": "Veeam threshold for `FailedVmLastestStates`.", @@ -39375,7 +39386,7 @@ }, "uuid": "6b2097c1-da7e-46f8-93c7-d5ea7708cf3b" }, - "3780": { + "3781": { "varname": "veeam_status_insecure", "caption": "Veeam Status: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -39384,7 +39395,7 @@ "settings": {}, "uuid": "398c2388-945a-4f9d-a05c-75782f9d2c3a" }, - "3781": { + "3782": { "varname": "veeam_status_max_backup_job_duration", "caption": "Veeam Status: Max Backup Job Duration", "description": "Maximum allowed backup job duration in seconds.", @@ -39395,7 +39406,7 @@ }, "uuid": "6b868377-e059-4238-995f-fd3490eebc07" }, - "3782": { + "3783": { "varname": "veeam_status_max_replica_job_duration", "caption": "Veeam Status: Max Replica Job Duration", "description": "Maximum allowed replica job duration in seconds.", @@ -39406,7 +39417,7 @@ }, "uuid": "ba2d3b23-1ff4-42e2-8586-359c12bb2d18" }, - "3783": { + "3784": { "varname": "veeam_status_no_insecure", "caption": "Veeam Status: No Insecure?", "description": "Verify the TLS certificate against the system trust store, overriding the insecure default of this check. Use it once the endpoint presents a publicly trusted certificate, or once its CA has been added to the system trust store.", @@ -39415,7 +39426,7 @@ "settings": {}, "uuid": "940fe1cd-9d80-462a-8770-d6646c531213" }, - "3784": { + "3785": { "varname": "veeam_status_no_perfdata", "caption": "Veeam Status: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -39424,7 +39435,7 @@ "settings": {}, "uuid": "a6a3dca9-977c-4080-9a76-f5457f60bd6f" }, - "3785": { + "3786": { "varname": "veeam_status_no_proxy", "caption": "Veeam Status: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -39433,7 +39444,7 @@ "settings": {}, "uuid": "7c5e32a1-ca4c-43bf-98c9-5390386f0747" }, - "3786": { + "3787": { "varname": "veeam_status_password", "caption": "Veeam Status: Password", "description": "Veeam REST API password.", @@ -39444,7 +39455,7 @@ }, "uuid": "0878e0fc-6eb0-4b88-9c9e-e2f3b2d460ec" }, - "3787": { + "3788": { "varname": "veeam_status_proxy", "caption": "Veeam Status: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -39455,7 +39466,7 @@ }, "uuid": "abf8f65b-203c-4fd9-af55-ecbac794745c" }, - "3788": { + "3789": { "varname": "veeam_status_timeout", "caption": "Veeam Status: Timeout", "description": "Network timeout in seconds.", @@ -39466,7 +39477,7 @@ }, "uuid": "87bcb255-ae66-4fb3-acfd-f554534e41e3" }, - "3789": { + "3790": { "varname": "veeam_status_url", "caption": "Veeam Status: URL", "description": "Veeam REST API URL.", @@ -39477,7 +39488,7 @@ }, "uuid": "8c34a0a4-f71e-42f3-86ba-20cb60ebd564" }, - "3790": { + "3791": { "varname": "veeam_status_username", "caption": "Veeam Status: Username", "description": "Veeam REST API username.", @@ -39488,7 +39499,7 @@ }, "uuid": "ca0a643b-b290-4c2a-9b1b-e434152fa737" }, - "3791": { + "3792": { "varname": "veeam_status_warning", "caption": "Veeam Status: Warning", "description": "WARN threshold for backup repository usage as a percentage.", @@ -39499,7 +39510,7 @@ }, "uuid": "a144730c-9cad-4a91-8145-7c1caee6b58d" }, - "3792": { + "3793": { "varname": "veeam_status_warning_vm_lastest_states", "caption": "Veeam Status: Warning VM Lastest States", "description": "Veeam threshold for `WarningVmLastestStates`.", @@ -39510,7 +39521,7 @@ }, "uuid": "0bfd1ab3-97c2-424d-b347-3f1241125eda" }, - "3793": { + "3794": { "varname": "veeam_status_warnings_job_runs", "caption": "Veeam Status: Warnings Job Runs", "description": "Veeam threshold for `WarningsJobRuns`.", @@ -39521,7 +39532,7 @@ }, "uuid": "bc63a9a9-01fa-44b6-8ed2-02fa09f349fc" }, - "3794": { + "3795": { "varname": "virustotal_scan_url_always_ok", "caption": "Virustotal Scan URL: Always OK?", "description": "Always returns OK.", @@ -39530,7 +39541,7 @@ "settings": {}, "uuid": "509e491c-c594-41c8-9999-960c5ac40ebf" }, - "3795": { + "3796": { "varname": "virustotal_scan_url_insecure", "caption": "Virustotal Scan URL: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -39539,7 +39550,7 @@ "settings": {}, "uuid": "fdcd8661-5fd8-408c-9520-68aa7133c707" }, - "3796": { + "3797": { "varname": "virustotal_scan_url_no_perfdata", "caption": "Virustotal Scan URL: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -39548,7 +39559,7 @@ "settings": {}, "uuid": "3411ff6b-86f5-4991-b4b3-2d890776fe76" }, - "3797": { + "3798": { "varname": "virustotal_scan_url_no_proxy", "caption": "Virustotal Scan URL: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -39557,7 +39568,7 @@ "settings": {}, "uuid": "b36f56ac-3855-42d7-a70a-81972bf873e1" }, - "3798": { + "3799": { "varname": "virustotal_scan_url_proxy", "caption": "Virustotal Scan URL: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -39568,7 +39579,7 @@ }, "uuid": "31604514-dba0-42d9-9b83-a7f16032aadc" }, - "3799": { + "3800": { "varname": "virustotal_scan_url_severity", "caption": "Virustotal Scan URL: Severity", "description": "Severity for alerting.", @@ -39581,7 +39592,7 @@ }, "uuid": "8bdd4612-1e52-4a8c-a7af-b97d8489d06f" }, - "3800": { + "3801": { "varname": "virustotal_scan_url_timeout", "caption": "Virustotal Scan URL: Timeout", "description": "Network timeout in seconds.", @@ -39592,7 +39603,7 @@ }, "uuid": "c8d4bcfa-0bfa-4281-9aea-e1b95df174cc" }, - "3801": { + "3802": { "varname": "virustotal_scan_url_token", "caption": "Virustotal Scan URL: Token", "description": "VirusTotal API token.", @@ -39603,7 +39614,7 @@ }, "uuid": "8dd31141-3b80-47ee-9aec-9b6a415942dc" }, - "3802": { + "3803": { "varname": "virustotal_scan_url_url", "caption": "Virustotal Scan URL: URL", "description": "URL to submit for scanning.", @@ -39614,7 +39625,7 @@ }, "uuid": "1707839b-fccd-453c-be28-9204ce3c0fe2" }, - "3803": { + "3804": { "varname": "whmcs_status_always_ok", "caption": "Whmcs Status: Always OK?", "description": "Always returns OK.", @@ -39623,7 +39634,7 @@ "settings": {}, "uuid": "5b70eec3-9f62-4884-ab28-cf9b2a0c9d6f" }, - "3804": { + "3805": { "varname": "whmcs_status_identifier", "caption": "Whmcs Status: Identifier", "description": "WHMCS API identifier.", @@ -39634,7 +39645,7 @@ }, "uuid": "d1b29aaa-a144-4ee5-8518-9d06db96aa38" }, - "3805": { + "3806": { "varname": "whmcs_status_insecure", "caption": "Whmcs Status: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -39643,7 +39654,7 @@ "settings": {}, "uuid": "1fc643bc-e6ed-47c9-9960-7ac25b834182" }, - "3806": { + "3807": { "varname": "whmcs_status_no_perfdata", "caption": "Whmcs Status: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -39652,7 +39663,7 @@ "settings": {}, "uuid": "4e61d45f-a835-4cb8-82ac-a3c1f34b2883" }, - "3807": { + "3808": { "varname": "whmcs_status_no_proxy", "caption": "Whmcs Status: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -39661,7 +39672,7 @@ "settings": {}, "uuid": "f43ae579-6232-461e-8153-7d09fab19e50" }, - "3808": { + "3809": { "varname": "whmcs_status_password", "caption": "Whmcs Status: Password", "description": "HTTP Basic Auth password.", @@ -39672,7 +39683,7 @@ }, "uuid": "b27dcd9b-df09-4008-aed8-1d815ab166e1" }, - "3809": { + "3810": { "varname": "whmcs_status_proxy", "caption": "Whmcs Status: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -39683,7 +39694,7 @@ }, "uuid": "30dbe3e2-7563-4fca-b295-decd48830fdf" }, - "3810": { + "3811": { "varname": "whmcs_status_secret", "caption": "Whmcs Status: Secret", "description": "WHMCS API secret.", @@ -39694,7 +39705,7 @@ }, "uuid": "06cc6f77-c17a-455f-9f69-6fd99e3e9db8" }, - "3811": { + "3812": { "varname": "whmcs_status_timeout", "caption": "Whmcs Status: Timeout", "description": "Network timeout in seconds.", @@ -39705,7 +39716,7 @@ }, "uuid": "dd0796e3-e89a-451a-b8f8-a4e088368c0a" }, - "3812": { + "3813": { "varname": "whmcs_status_url", "caption": "Whmcs Status: URL", "description": "Base URL of the WHMCS installation, without the trailing `/includes/api.php`. Example: `--url=https://whmcs.example.com`", @@ -39716,7 +39727,7 @@ }, "uuid": "5742903f-2e27-4f32-af07-6b9cb32f336d" }, - "3813": { + "3814": { "varname": "whmcs_status_username", "caption": "Whmcs Status: Username", "description": "HTTP Basic Auth username.", @@ -39727,7 +39738,7 @@ }, "uuid": "816e5cf4-57cc-4e74-98a6-4d8b23f35e91" }, - "3814": { + "3815": { "varname": "wildfly_deployment_status_always_ok", "caption": "Wildfly Deployment Status: Always OK?", "description": "Always returns OK.", @@ -39736,7 +39747,7 @@ "settings": {}, "uuid": "cebadc5c-bbfb-4f9c-b0c2-90dc08e8a3c4" }, - "3815": { + "3816": { "varname": "wildfly_deployment_status_deployment", "caption": "Wildfly Deployment Status: Deployment", "description": "Application deployment name to check. Can be specified multiple times. If not specified, all deployments are checked.", @@ -39747,7 +39758,7 @@ }, "uuid": "45372d22-4bc7-4832-8732-54b05b41b99a" }, - "3816": { + "3817": { "varname": "wildfly_deployment_status_insecure", "caption": "Wildfly Deployment Status: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -39756,7 +39767,7 @@ "settings": {}, "uuid": "0236f511-a989-4878-ac7c-88eb39ae1dea" }, - "3817": { + "3818": { "varname": "wildfly_deployment_status_instance", "caption": "Wildfly Deployment Status: Instance", "description": "WildFly instance (server-config) to check when running in domain mode.", @@ -39767,7 +39778,7 @@ }, "uuid": "3aa140d0-76eb-43e9-ac6c-84d8430030e1" }, - "3818": { + "3819": { "varname": "wildfly_deployment_status_mode", "caption": "Wildfly Deployment Status: Mode", "description": "WildFly server mode.", @@ -39780,7 +39791,7 @@ }, "uuid": "bfc759fd-2053-420d-a5c1-1446cc9ac612" }, - "3819": { + "3820": { "varname": "wildfly_deployment_status_no_perfdata", "caption": "Wildfly Deployment Status: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -39789,7 +39800,7 @@ "settings": {}, "uuid": "be53a355-5eb2-4cb3-926b-337680642fb1" }, - "3820": { + "3821": { "varname": "wildfly_deployment_status_no_proxy", "caption": "Wildfly Deployment Status: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -39798,7 +39809,7 @@ "settings": {}, "uuid": "6e0ceaa4-9331-40a5-9507-2f94260711b9" }, - "3821": { + "3822": { "varname": "wildfly_deployment_status_node", "caption": "Wildfly Deployment Status: Node", "description": "WildFly node (host) when running in domain mode.", @@ -39809,7 +39820,7 @@ }, "uuid": "0d652e36-cc75-4a1b-9123-0b77951a5939" }, - "3822": { + "3823": { "varname": "wildfly_deployment_status_password", "caption": "Wildfly Deployment Status: Password", "description": "WildFly management API password.", @@ -39820,7 +39831,7 @@ }, "uuid": "12ea6088-fa1a-49d5-8881-08a9df6f66f6" }, - "3823": { + "3824": { "varname": "wildfly_deployment_status_proxy", "caption": "Wildfly Deployment Status: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -39831,7 +39842,7 @@ }, "uuid": "1f98df2a-6d4e-4cdc-955e-88e60802392b" }, - "3824": { + "3825": { "varname": "wildfly_deployment_status_timeout", "caption": "Wildfly Deployment Status: Timeout", "description": "Network timeout in seconds.", @@ -39842,7 +39853,7 @@ }, "uuid": "c0d6d702-7918-459c-8c52-6d594387fa7e" }, - "3825": { + "3826": { "varname": "wildfly_deployment_status_url", "caption": "Wildfly Deployment Status: URL", "description": "WildFly management API URL.", @@ -39853,7 +39864,7 @@ }, "uuid": "d121e620-ff66-407f-9aa4-6bce694a80a0" }, - "3826": { + "3827": { "varname": "wildfly_deployment_status_username", "caption": "Wildfly Deployment Status: Username", "description": "WildFly management API username.", @@ -39864,7 +39875,7 @@ }, "uuid": "c21bfe50-1468-4dbe-9646-2c5438bb2553" }, - "3827": { + "3828": { "varname": "wildfly_gc_status_always_ok", "caption": "Wildfly GC Status: Always OK?", "description": "Always returns OK.", @@ -39873,7 +39884,7 @@ "settings": {}, "uuid": "a298d803-f0e3-4d0e-8e14-63216f3945d0" }, - "3828": { + "3829": { "varname": "wildfly_gc_status_insecure", "caption": "Wildfly GC Status: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -39882,7 +39893,7 @@ "settings": {}, "uuid": "3476fabf-d69d-47fd-9f71-09c500e735a9" }, - "3829": { + "3830": { "varname": "wildfly_gc_status_instance", "caption": "Wildfly GC Status: Instance", "description": "WildFly instance (server-config) to check when running in domain mode.", @@ -39893,7 +39904,7 @@ }, "uuid": "78ab1d08-56af-4fc6-ae9c-f85ba1634286" }, - "3830": { + "3831": { "varname": "wildfly_gc_status_mode", "caption": "Wildfly GC Status: Mode", "description": "WildFly server mode.", @@ -39906,7 +39917,7 @@ }, "uuid": "89c11893-37fb-4d1c-a114-d2a62c3a6b18" }, - "3831": { + "3832": { "varname": "wildfly_gc_status_no_perfdata", "caption": "Wildfly GC Status: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -39915,7 +39926,7 @@ "settings": {}, "uuid": "c06095d1-6986-4cb0-9442-7a5126691423" }, - "3832": { + "3833": { "varname": "wildfly_gc_status_no_proxy", "caption": "Wildfly GC Status: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -39924,7 +39935,7 @@ "settings": {}, "uuid": "82cbe143-e540-4dd9-9791-b2b4e19f9f68" }, - "3833": { + "3834": { "varname": "wildfly_gc_status_node", "caption": "Wildfly GC Status: Node", "description": "WildFly node (host) when running in domain mode.", @@ -39935,7 +39946,7 @@ }, "uuid": "399d48cb-4b0b-470c-b980-a11e90d77943" }, - "3834": { + "3835": { "varname": "wildfly_gc_status_password", "caption": "Wildfly GC Status: Password", "description": "WildFly management API password.", @@ -39946,7 +39957,7 @@ }, "uuid": "aae3a9b4-7fdc-4897-9c71-8c57ea2539ac" }, - "3835": { + "3836": { "varname": "wildfly_gc_status_proxy", "caption": "Wildfly GC Status: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -39957,7 +39968,7 @@ }, "uuid": "7e6a0e0d-0856-4501-80a1-19d4418dc7f7" }, - "3836": { + "3837": { "varname": "wildfly_gc_status_timeout", "caption": "Wildfly GC Status: Timeout", "description": "Network timeout in seconds.", @@ -39968,7 +39979,7 @@ }, "uuid": "87383eff-02cb-4dea-95ff-7e8aff7427dd" }, - "3837": { + "3838": { "varname": "wildfly_gc_status_url", "caption": "Wildfly GC Status: URL", "description": "WildFly management API URL.", @@ -39979,7 +39990,7 @@ }, "uuid": "7e5e9d21-1c30-40fd-a582-525f16d3af60" }, - "3838": { + "3839": { "varname": "wildfly_gc_status_username", "caption": "Wildfly GC Status: Username", "description": "WildFly management API username.", @@ -39990,7 +40001,7 @@ }, "uuid": "23f57506-af32-4bcc-9aed-8c4fdf61f121" }, - "3839": { + "3840": { "varname": "wildfly_memory_pool_usage_always_ok", "caption": "Wildfly Memory Pool Usage: Always OK?", "description": "Always returns OK.", @@ -39999,7 +40010,7 @@ "settings": {}, "uuid": "03696258-3c8c-4944-afd9-b5005f0ec799" }, - "3840": { + "3841": { "varname": "wildfly_memory_pool_usage_insecure", "caption": "Wildfly Memory Pool Usage: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -40008,7 +40019,7 @@ "settings": {}, "uuid": "293e7ec6-5ae6-4046-9ff2-33a74dc08961" }, - "3841": { + "3842": { "varname": "wildfly_memory_pool_usage_instance", "caption": "Wildfly Memory Pool Usage: Instance", "description": "WildFly instance (server-config) to check when running in domain mode.", @@ -40019,7 +40030,7 @@ }, "uuid": "f02c778d-2705-46ee-aa62-e6cc42a329b8" }, - "3842": { + "3843": { "varname": "wildfly_memory_pool_usage_mode", "caption": "Wildfly Memory Pool Usage: Mode", "description": "WildFly server mode.", @@ -40032,7 +40043,7 @@ }, "uuid": "90480b39-e7cf-4036-b5e5-a09d954544ed" }, - "3843": { + "3844": { "varname": "wildfly_memory_pool_usage_no_perfdata", "caption": "Wildfly Memory Pool Usage: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -40041,7 +40052,7 @@ "settings": {}, "uuid": "fe11e11d-916e-49ad-ad88-f4c9d066c1c8" }, - "3844": { + "3845": { "varname": "wildfly_memory_pool_usage_no_proxy", "caption": "Wildfly Memory Pool Usage: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -40050,7 +40061,7 @@ "settings": {}, "uuid": "d0deb8a5-ba92-4256-b942-24b77a2859dc" }, - "3845": { + "3846": { "varname": "wildfly_memory_pool_usage_node", "caption": "Wildfly Memory Pool Usage: Node", "description": "WildFly node (host) when running in domain mode.", @@ -40061,7 +40072,7 @@ }, "uuid": "0aadd6de-10cb-42fa-a503-7ae82f5009c4" }, - "3846": { + "3847": { "varname": "wildfly_memory_pool_usage_password", "caption": "Wildfly Memory Pool Usage: Password", "description": "WildFly management API password.", @@ -40072,7 +40083,7 @@ }, "uuid": "e4a50741-95e1-4924-9a63-2e239753216e" }, - "3847": { + "3848": { "varname": "wildfly_memory_pool_usage_proxy", "caption": "Wildfly Memory Pool Usage: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -40083,7 +40094,7 @@ }, "uuid": "c68c785e-b123-40cc-ab97-685f2c8a7e6b" }, - "3848": { + "3849": { "varname": "wildfly_memory_pool_usage_timeout", "caption": "Wildfly Memory Pool Usage: Timeout", "description": "Network timeout in seconds.", @@ -40094,7 +40105,7 @@ }, "uuid": "861216dd-5fd1-47a8-a9d5-0be670eaa22b" }, - "3849": { + "3850": { "varname": "wildfly_memory_pool_usage_url", "caption": "Wildfly Memory Pool Usage: URL", "description": "WildFly management API URL.", @@ -40105,7 +40116,7 @@ }, "uuid": "5525654c-e246-4b4a-9488-ab432e1f63d7" }, - "3850": { + "3851": { "varname": "wildfly_memory_pool_usage_username", "caption": "Wildfly Memory Pool Usage: Username", "description": "WildFly management API username.", @@ -40116,7 +40127,7 @@ }, "uuid": "b92caff7-6a03-495a-93c3-ddd7d802a099" }, - "3851": { + "3852": { "varname": "wildfly_memory_usage_always_ok", "caption": "Wildfly Memory Usage: Always OK?", "description": "Always returns OK.", @@ -40125,7 +40136,7 @@ "settings": {}, "uuid": "22a57626-e839-430c-8e21-c5d4dbf6cb37" }, - "3852": { + "3853": { "varname": "wildfly_memory_usage_critical", "caption": "Wildfly Memory Usage: Critical", "description": "CRIT threshold in percent.", @@ -40136,7 +40147,7 @@ }, "uuid": "da178b4b-4c45-46b0-8901-d00a34cbda38" }, - "3853": { + "3854": { "varname": "wildfly_memory_usage_insecure", "caption": "Wildfly Memory Usage: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -40145,7 +40156,7 @@ "settings": {}, "uuid": "72960a12-c5ea-40f5-b4ee-b6dc9c5d0567" }, - "3854": { + "3855": { "varname": "wildfly_memory_usage_instance", "caption": "Wildfly Memory Usage: Instance", "description": "WildFly instance (server-config) to check when running in domain mode.", @@ -40156,7 +40167,7 @@ }, "uuid": "c21bf224-d726-4ad9-bb83-73ccb139abd1" }, - "3855": { + "3856": { "varname": "wildfly_memory_usage_mode", "caption": "Wildfly Memory Usage: Mode", "description": "WildFly server mode.", @@ -40169,7 +40180,7 @@ }, "uuid": "6de85a60-667c-424e-be88-32491e6df30a" }, - "3856": { + "3857": { "varname": "wildfly_memory_usage_no_perfdata", "caption": "Wildfly Memory Usage: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -40178,7 +40189,7 @@ "settings": {}, "uuid": "9f65a849-13e6-41ee-a889-a27aa870dbd5" }, - "3857": { + "3858": { "varname": "wildfly_memory_usage_no_proxy", "caption": "Wildfly Memory Usage: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -40187,7 +40198,7 @@ "settings": {}, "uuid": "f20130e3-12f6-453c-be18-c275b84bfaa8" }, - "3858": { + "3859": { "varname": "wildfly_memory_usage_node", "caption": "Wildfly Memory Usage: Node", "description": "WildFly node (host) when running in domain mode.", @@ -40198,7 +40209,7 @@ }, "uuid": "dea23668-9c61-40e0-9896-fe2a13e516ba" }, - "3859": { + "3860": { "varname": "wildfly_memory_usage_password", "caption": "Wildfly Memory Usage: Password", "description": "WildFly management API password.", @@ -40209,7 +40220,7 @@ }, "uuid": "4f9581a4-98a4-4fa4-8c1a-34867fc17cad" }, - "3860": { + "3861": { "varname": "wildfly_memory_usage_proxy", "caption": "Wildfly Memory Usage: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -40220,7 +40231,7 @@ }, "uuid": "502d5d62-d355-4b12-9579-caaa33d19855" }, - "3861": { + "3862": { "varname": "wildfly_memory_usage_timeout", "caption": "Wildfly Memory Usage: Timeout", "description": "Network timeout in seconds.", @@ -40231,7 +40242,7 @@ }, "uuid": "28c8d2c5-9fed-48e9-839c-9017340b5915" }, - "3862": { + "3863": { "varname": "wildfly_memory_usage_url", "caption": "Wildfly Memory Usage: URL", "description": "WildFly management API URL.", @@ -40242,7 +40253,7 @@ }, "uuid": "2ba2b2a6-8ff2-46a4-ae17-9bd03ff55fee" }, - "3863": { + "3864": { "varname": "wildfly_memory_usage_username", "caption": "Wildfly Memory Usage: Username", "description": "WildFly management API username.", @@ -40253,7 +40264,7 @@ }, "uuid": "e9f1726a-9f97-4ce0-a105-a113b71a2f7f" }, - "3864": { + "3865": { "varname": "wildfly_memory_usage_warning", "caption": "Wildfly Memory Usage: Warning", "description": "WARN threshold in percent.", @@ -40264,7 +40275,7 @@ }, "uuid": "dd4e915f-6c95-4143-88d9-c3f0ac2af925" }, - "3865": { + "3866": { "varname": "wildfly_non_xa_datasource_stats_always_ok", "caption": "Wildfly Non XA Datasource Stats: Always OK?", "description": "Always returns OK.", @@ -40273,7 +40284,7 @@ "settings": {}, "uuid": "8ff71c1c-2015-4b71-b0f8-342b7f756578" }, - "3866": { + "3867": { "varname": "wildfly_non_xa_datasource_stats_critical", "caption": "Wildfly Non XA Datasource Stats: Critical", "description": "CRIT threshold in percent.", @@ -40284,7 +40295,7 @@ }, "uuid": "19bf24cd-9e7d-4fff-8544-6ad19f925d1e" }, - "3867": { + "3868": { "varname": "wildfly_non_xa_datasource_stats_datasource", "caption": "Wildfly Non XA Datasource Stats: Datasource", "description": "Non-XA datasource name to check. Can be specified multiple times. If not specified, all non-XA datasources are checked.", @@ -40295,7 +40306,7 @@ }, "uuid": "2043f01a-6179-4b57-a16c-ac76545dfefb" }, - "3868": { + "3869": { "varname": "wildfly_non_xa_datasource_stats_insecure", "caption": "Wildfly Non XA Datasource Stats: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -40304,7 +40315,7 @@ "settings": {}, "uuid": "401a8b05-49c6-473e-ae51-c870a9245a18" }, - "3869": { + "3870": { "varname": "wildfly_non_xa_datasource_stats_instance", "caption": "Wildfly Non XA Datasource Stats: Instance", "description": "WildFly instance (server-config) to check when running in domain mode.", @@ -40315,7 +40326,7 @@ }, "uuid": "5b61a5b7-2077-4c21-b201-c4169bfb55d3" }, - "3870": { + "3871": { "varname": "wildfly_non_xa_datasource_stats_mode", "caption": "Wildfly Non XA Datasource Stats: Mode", "description": "WildFly server mode.", @@ -40328,7 +40339,7 @@ }, "uuid": "9c96aa0c-7ab9-4a02-82c7-1f216e0d566a" }, - "3871": { + "3872": { "varname": "wildfly_non_xa_datasource_stats_no_match_severity", "caption": "Wildfly Non XA Datasource Stats: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -40341,7 +40352,7 @@ }, "uuid": "9182f625-a06f-42c5-8316-8bc5138f3d5d" }, - "3872": { + "3873": { "varname": "wildfly_non_xa_datasource_stats_no_perfdata", "caption": "Wildfly Non XA Datasource Stats: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -40350,7 +40361,7 @@ "settings": {}, "uuid": "fe96b20a-6ed6-49ed-8b86-350fb4e595a6" }, - "3873": { + "3874": { "varname": "wildfly_non_xa_datasource_stats_no_proxy", "caption": "Wildfly Non XA Datasource Stats: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -40359,7 +40370,7 @@ "settings": {}, "uuid": "372c16c1-e390-456d-b961-41dcffb69550" }, - "3874": { + "3875": { "varname": "wildfly_non_xa_datasource_stats_node", "caption": "Wildfly Non XA Datasource Stats: Node", "description": "WildFly node (host) when running in domain mode.", @@ -40370,7 +40381,7 @@ }, "uuid": "73ea7300-a87a-4fdc-9e3e-1b65e1015ef0" }, - "3875": { + "3876": { "varname": "wildfly_non_xa_datasource_stats_password", "caption": "Wildfly Non XA Datasource Stats: Password", "description": "WildFly management API password.", @@ -40381,7 +40392,7 @@ }, "uuid": "19077fa3-0358-4af7-9475-98675215f65e" }, - "3876": { + "3877": { "varname": "wildfly_non_xa_datasource_stats_proxy", "caption": "Wildfly Non XA Datasource Stats: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -40392,7 +40403,7 @@ }, "uuid": "9b5ce3c2-58b5-450f-a81e-5f51da99b177" }, - "3877": { + "3878": { "varname": "wildfly_non_xa_datasource_stats_timeout", "caption": "Wildfly Non XA Datasource Stats: Timeout", "description": "Network timeout in seconds.", @@ -40403,7 +40414,7 @@ }, "uuid": "1bc908f4-7ebe-4c3b-8b6b-6acc1526210c" }, - "3878": { + "3879": { "varname": "wildfly_non_xa_datasource_stats_url", "caption": "Wildfly Non XA Datasource Stats: URL", "description": "WildFly management API URL.", @@ -40414,7 +40425,7 @@ }, "uuid": "817bae0d-4014-4850-b18d-eb930105e002" }, - "3879": { + "3880": { "varname": "wildfly_non_xa_datasource_stats_username", "caption": "Wildfly Non XA Datasource Stats: Username", "description": "WildFly management API username.", @@ -40425,7 +40436,7 @@ }, "uuid": "7344783e-cc71-4c2b-aba6-584e4455f716" }, - "3880": { + "3881": { "varname": "wildfly_non_xa_datasource_stats_warning", "caption": "Wildfly Non XA Datasource Stats: Warning", "description": "WARN threshold in percent.", @@ -40436,7 +40447,7 @@ }, "uuid": "dcfb2f33-df2c-4466-bc2f-62efaf15b32f" }, - "3881": { + "3882": { "varname": "wildfly_server_status_always_ok", "caption": "Wildfly Server Status: Always OK?", "description": "Always returns OK.", @@ -40445,7 +40456,7 @@ "settings": {}, "uuid": "6a0de466-e621-4c1e-81a1-075a6d9b219d" }, - "3882": { + "3883": { "varname": "wildfly_server_status_insecure", "caption": "Wildfly Server Status: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -40454,7 +40465,7 @@ "settings": {}, "uuid": "e06bcbb3-4784-4d16-86eb-e9e2cc8667a5" }, - "3883": { + "3884": { "varname": "wildfly_server_status_instance", "caption": "Wildfly Server Status: Instance", "description": "WildFly instance (server-config) to check when running in domain mode.", @@ -40465,7 +40476,7 @@ }, "uuid": "1936ad66-e836-40ea-9c79-6301d3373158" }, - "3884": { + "3885": { "varname": "wildfly_server_status_mode", "caption": "Wildfly Server Status: Mode", "description": "WildFly server mode.", @@ -40478,7 +40489,7 @@ }, "uuid": "dd5cd151-2307-437a-b10f-f337c7842af2" }, - "3885": { + "3886": { "varname": "wildfly_server_status_no_perfdata", "caption": "Wildfly Server Status: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -40487,7 +40498,7 @@ "settings": {}, "uuid": "11a9e5fc-3d9c-4703-b751-373fa518b4d8" }, - "3886": { + "3887": { "varname": "wildfly_server_status_no_proxy", "caption": "Wildfly Server Status: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -40496,7 +40507,7 @@ "settings": {}, "uuid": "41b4fba1-c7b9-4c9e-9654-3db6076d5820" }, - "3887": { + "3888": { "varname": "wildfly_server_status_node", "caption": "Wildfly Server Status: Node", "description": "WildFly node (host) when running in domain mode.", @@ -40507,7 +40518,7 @@ }, "uuid": "1d28813d-01af-4437-a5e5-13bebd087cc7" }, - "3888": { + "3889": { "varname": "wildfly_server_status_password", "caption": "Wildfly Server Status: Password", "description": "WildFly management API password.", @@ -40518,7 +40529,7 @@ }, "uuid": "e1ddba3f-c3f3-455b-b7c7-5250d3b6928a" }, - "3889": { + "3890": { "varname": "wildfly_server_status_proxy", "caption": "Wildfly Server Status: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -40529,7 +40540,7 @@ }, "uuid": "22f830df-a2bb-4ee3-ace6-bbf76d0c1b9a" }, - "3890": { + "3891": { "varname": "wildfly_server_status_timeout", "caption": "Wildfly Server Status: Timeout", "description": "Network timeout in seconds.", @@ -40540,7 +40551,7 @@ }, "uuid": "eb80a017-54d8-4e8c-89f9-18462c5bb433" }, - "3891": { + "3892": { "varname": "wildfly_server_status_url", "caption": "Wildfly Server Status: URL", "description": "WildFly management API URL.", @@ -40551,7 +40562,7 @@ }, "uuid": "bd45e3ab-c4e4-4b33-ba2d-0df9031876c4" }, - "3892": { + "3893": { "varname": "wildfly_server_status_username", "caption": "Wildfly Server Status: Username", "description": "WildFly management API username.", @@ -40562,7 +40573,7 @@ }, "uuid": "83fd6a10-80a0-49ea-b1d0-de05238f926f" }, - "3893": { + "3894": { "varname": "wildfly_thread_usage_always_ok", "caption": "Wildfly Thread Usage: Always OK?", "description": "Always returns OK.", @@ -40571,7 +40582,7 @@ "settings": {}, "uuid": "49c33ec5-c71c-4eb2-a957-63e59b11696b" }, - "3894": { + "3895": { "varname": "wildfly_thread_usage_critical", "caption": "Wildfly Thread Usage: Critical", "description": "CRIT threshold in percent.", @@ -40582,7 +40593,7 @@ }, "uuid": "7e254649-a0f4-4501-9583-1f962225e416" }, - "3895": { + "3896": { "varname": "wildfly_thread_usage_insecure", "caption": "Wildfly Thread Usage: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -40591,7 +40602,7 @@ "settings": {}, "uuid": "26d86fd2-fae3-4994-abc6-9ef749546c3a" }, - "3896": { + "3897": { "varname": "wildfly_thread_usage_instance", "caption": "Wildfly Thread Usage: Instance", "description": "WildFly instance (server-config) to check when running in domain mode.", @@ -40602,7 +40613,7 @@ }, "uuid": "a830c851-9591-4c00-a71c-69b30b553be0" }, - "3897": { + "3898": { "varname": "wildfly_thread_usage_mode", "caption": "Wildfly Thread Usage: Mode", "description": "WildFly server mode.", @@ -40615,7 +40626,7 @@ }, "uuid": "e455258b-eb24-4671-9c3a-206975b3dfec" }, - "3898": { + "3899": { "varname": "wildfly_thread_usage_no_perfdata", "caption": "Wildfly Thread Usage: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -40624,7 +40635,7 @@ "settings": {}, "uuid": "ba36e39f-cb81-4a71-9033-7db916fe81fd" }, - "3899": { + "3900": { "varname": "wildfly_thread_usage_no_proxy", "caption": "Wildfly Thread Usage: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -40633,7 +40644,7 @@ "settings": {}, "uuid": "86418a13-d742-44eb-883f-31a68ce4ac10" }, - "3900": { + "3901": { "varname": "wildfly_thread_usage_node", "caption": "Wildfly Thread Usage: Node", "description": "WildFly node (host) when running in domain mode.", @@ -40644,7 +40655,7 @@ }, "uuid": "3306b037-606b-44db-b749-84f982498096" }, - "3901": { + "3902": { "varname": "wildfly_thread_usage_password", "caption": "Wildfly Thread Usage: Password", "description": "WildFly management API password.", @@ -40655,7 +40666,7 @@ }, "uuid": "bc9766cc-a898-4790-b3e3-592778835d62" }, - "3902": { + "3903": { "varname": "wildfly_thread_usage_proxy", "caption": "Wildfly Thread Usage: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -40666,7 +40677,7 @@ }, "uuid": "dc719ce3-15b3-44da-83b1-04de1e32688c" }, - "3903": { + "3904": { "varname": "wildfly_thread_usage_timeout", "caption": "Wildfly Thread Usage: Timeout", "description": "Network timeout in seconds.", @@ -40677,7 +40688,7 @@ }, "uuid": "096228bd-5e7c-4cdf-b56d-95a56f78ae7a" }, - "3904": { + "3905": { "varname": "wildfly_thread_usage_url", "caption": "Wildfly Thread Usage: URL", "description": "WildFly management API URL.", @@ -40688,7 +40699,7 @@ }, "uuid": "9d93157d-7630-4dc9-9863-fd647682a669" }, - "3905": { + "3906": { "varname": "wildfly_thread_usage_username", "caption": "Wildfly Thread Usage: Username", "description": "WildFly management API username.", @@ -40699,7 +40710,7 @@ }, "uuid": "0a57c78e-be34-412a-8354-8894d90bd9c9" }, - "3906": { + "3907": { "varname": "wildfly_thread_usage_warning", "caption": "Wildfly Thread Usage: Warning", "description": "WARN threshold in percent.", @@ -40710,7 +40721,7 @@ }, "uuid": "61cdcab2-39c6-4e93-a0f4-7f6de024e78b" }, - "3907": { + "3908": { "varname": "wildfly_uptime_always_ok", "caption": "Wildfly Uptime: Always OK?", "description": "Always returns OK.", @@ -40719,7 +40730,7 @@ "settings": {}, "uuid": "17badd97-3f58-437c-ac7d-918d02470fdb" }, - "3908": { + "3909": { "varname": "wildfly_uptime_critical", "caption": "Wildfly Uptime: Critical", "description": "CRIT threshold in percent.", @@ -40730,7 +40741,7 @@ }, "uuid": "a4b70a21-ca69-4204-92c8-fea946788fdb" }, - "3909": { + "3910": { "varname": "wildfly_uptime_insecure", "caption": "Wildfly Uptime: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -40739,7 +40750,7 @@ "settings": {}, "uuid": "913a0c55-d129-4cec-8370-d54682d2c508" }, - "3910": { + "3911": { "varname": "wildfly_uptime_instance", "caption": "Wildfly Uptime: Instance", "description": "WildFly instance (server-config) to check when running in domain mode.", @@ -40750,7 +40761,7 @@ }, "uuid": "1706a94f-a60c-475e-a5b3-b31d85fc0e0c" }, - "3911": { + "3912": { "varname": "wildfly_uptime_mode", "caption": "Wildfly Uptime: Mode", "description": "WildFly server mode.", @@ -40763,7 +40774,7 @@ }, "uuid": "de2c5fed-7d99-448b-b612-debe0185427d" }, - "3912": { + "3913": { "varname": "wildfly_uptime_no_perfdata", "caption": "Wildfly Uptime: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -40772,7 +40783,7 @@ "settings": {}, "uuid": "0cc71772-0301-412b-8262-144dc14adfba" }, - "3913": { + "3914": { "varname": "wildfly_uptime_no_proxy", "caption": "Wildfly Uptime: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -40781,7 +40792,7 @@ "settings": {}, "uuid": "a3400067-79f2-4629-8145-8248c51bc0d6" }, - "3914": { + "3915": { "varname": "wildfly_uptime_node", "caption": "Wildfly Uptime: Node", "description": "WildFly node (host) when running in domain mode.", @@ -40792,7 +40803,7 @@ }, "uuid": "1a357ecd-597e-49c7-9f84-1a95b615584c" }, - "3915": { + "3916": { "varname": "wildfly_uptime_password", "caption": "Wildfly Uptime: Password", "description": "WildFly management API password.", @@ -40803,7 +40814,7 @@ }, "uuid": "100eed9f-5568-48a5-bc94-5da34b9a2aa1" }, - "3916": { + "3917": { "varname": "wildfly_uptime_proxy", "caption": "Wildfly Uptime: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -40814,7 +40825,7 @@ }, "uuid": "63cf45dd-495d-4715-8f7c-f220c13d0c4b" }, - "3917": { + "3918": { "varname": "wildfly_uptime_timeout", "caption": "Wildfly Uptime: Timeout", "description": "Network timeout in seconds.", @@ -40825,7 +40836,7 @@ }, "uuid": "567674c2-f792-4819-bd80-872a4b132c2f" }, - "3918": { + "3919": { "varname": "wildfly_uptime_url", "caption": "Wildfly Uptime: URL", "description": "WildFly management API URL.", @@ -40836,7 +40847,7 @@ }, "uuid": "d3eace00-e91c-4edc-9ec3-c5f7ab0739f2" }, - "3919": { + "3920": { "varname": "wildfly_uptime_username", "caption": "Wildfly Uptime: Username", "description": "WildFly management API username.", @@ -40847,7 +40858,7 @@ }, "uuid": "0d645940-01ab-4c57-bf37-4ca886e34d73" }, - "3920": { + "3921": { "varname": "wildfly_uptime_warning", "caption": "Wildfly Uptime: Warning", "description": "WARN threshold in percent.", @@ -40858,7 +40869,7 @@ }, "uuid": "41a2cb00-d74f-4051-a28f-56326e59d9a8" }, - "3921": { + "3922": { "varname": "wildfly_version_always_ok", "caption": "Wildfly Version: Always OK?", "description": "Always returns OK.", @@ -40867,7 +40878,7 @@ "settings": {}, "uuid": "2d5d9fe6-d358-4a14-a488-62b234536645" }, - "3922": { + "3923": { "varname": "wildfly_version_cache_expire", "caption": "Wildfly Version: Cache Expire", "description": "The amount of time after which the cached latest release expires, in hours.", @@ -40878,7 +40889,7 @@ }, "uuid": "3f4aee7d-9201-49e7-b2ba-94117c4f3c17" }, - "3923": { + "3924": { "varname": "wildfly_version_insecure", "caption": "Wildfly Version: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -40887,7 +40898,7 @@ "settings": {}, "uuid": "38a3cf41-c1b9-47ad-9d9a-d6dfc8b1d267" }, - "3924": { + "3925": { "varname": "wildfly_version_instance", "caption": "Wildfly Version: Instance", "description": "WildFly instance (server-config) to check when running in domain mode.", @@ -40898,7 +40909,7 @@ }, "uuid": "db33a667-9064-42b9-acd4-17efc2a2b2cd" }, - "3925": { + "3926": { "varname": "wildfly_version_mode", "caption": "Wildfly Version: Mode", "description": "WildFly server mode.", @@ -40911,7 +40922,7 @@ }, "uuid": "6f64e2c5-791a-48b7-aeb4-b76376212924" }, - "3926": { + "3927": { "varname": "wildfly_version_no_perfdata", "caption": "Wildfly Version: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -40920,7 +40931,7 @@ "settings": {}, "uuid": "5c94be33-89a4-4e0c-8bf1-f9affe55d3e6" }, - "3927": { + "3928": { "varname": "wildfly_version_no_proxy", "caption": "Wildfly Version: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -40929,7 +40940,7 @@ "settings": {}, "uuid": "86f79d27-cfec-4122-b712-7c07c2887c1a" }, - "3928": { + "3929": { "varname": "wildfly_version_node", "caption": "Wildfly Version: Node", "description": "WildFly node (host) when running in domain mode.", @@ -40940,7 +40951,7 @@ }, "uuid": "6cca8939-de08-4e3b-8144-54e2155e0f5f" }, - "3929": { + "3930": { "varname": "wildfly_version_password", "caption": "Wildfly Version: Password", "description": "WildFly management API password.", @@ -40951,7 +40962,7 @@ }, "uuid": "16b54882-d5fa-4b5b-9884-1f43ea218ff6" }, - "3930": { + "3931": { "varname": "wildfly_version_proxy", "caption": "Wildfly Version: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -40962,7 +40973,7 @@ }, "uuid": "c467c170-c4b9-4d15-975d-da0919bd0cde" }, - "3931": { + "3932": { "varname": "wildfly_version_timeout", "caption": "Wildfly Version: Timeout", "description": "Network timeout in seconds.", @@ -40973,7 +40984,7 @@ }, "uuid": "a8c41315-02f9-4f60-b945-147b6d4b7776" }, - "3932": { + "3933": { "varname": "wildfly_version_url", "caption": "Wildfly Version: URL", "description": "WildFly management API URL.", @@ -40984,7 +40995,7 @@ }, "uuid": "d4642706-ae4e-4646-8766-503b1390ec1a" }, - "3933": { + "3934": { "varname": "wildfly_version_username", "caption": "Wildfly Version: Username", "description": "WildFly management API username.", @@ -40995,7 +41006,7 @@ }, "uuid": "bf3157d0-b214-497a-8baf-ffbc50ebcd45" }, - "3934": { + "3935": { "varname": "wildfly_xa_datasource_stats_always_ok", "caption": "Wildfly XA Datasource Stats: Always OK?", "description": "Always returns OK.", @@ -41004,7 +41015,7 @@ "settings": {}, "uuid": "87848de8-98d2-4d0d-be6b-128fd4772c40" }, - "3935": { + "3936": { "varname": "wildfly_xa_datasource_stats_critical", "caption": "Wildfly XA Datasource Stats: Critical", "description": "CRIT threshold in percent.", @@ -41015,7 +41026,7 @@ }, "uuid": "36e57faf-ea1c-4248-a25b-64e41b51dcaa" }, - "3936": { + "3937": { "varname": "wildfly_xa_datasource_stats_datasource", "caption": "Wildfly XA Datasource Stats: Datasource", "description": "XA datasource name to check. Can be specified multiple times. If not specified, all XA datasources are checked.", @@ -41026,7 +41037,7 @@ }, "uuid": "e3831e82-5458-4b17-b23f-9e450023d9d8" }, - "3937": { + "3938": { "varname": "wildfly_xa_datasource_stats_insecure", "caption": "Wildfly XA Datasource Stats: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -41035,7 +41046,7 @@ "settings": {}, "uuid": "e8bd47fa-6a48-42ff-98d2-1e8d7d9a9a34" }, - "3938": { + "3939": { "varname": "wildfly_xa_datasource_stats_instance", "caption": "Wildfly XA Datasource Stats: Instance", "description": "WildFly instance (server-config) to check when running in domain mode.", @@ -41046,7 +41057,7 @@ }, "uuid": "550ce4b9-772f-4c64-861b-35aac6f28b0b" }, - "3939": { + "3940": { "varname": "wildfly_xa_datasource_stats_mode", "caption": "Wildfly XA Datasource Stats: Mode", "description": "WildFly server mode.", @@ -41059,7 +41070,7 @@ }, "uuid": "5fc98770-7a65-4cef-9f9b-bf2caf471da4" }, - "3940": { + "3941": { "varname": "wildfly_xa_datasource_stats_no_match_severity", "caption": "Wildfly XA Datasource Stats: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -41072,7 +41083,7 @@ }, "uuid": "5523b5cc-ea67-4cdd-8af4-58c770d41c3f" }, - "3941": { + "3942": { "varname": "wildfly_xa_datasource_stats_no_perfdata", "caption": "Wildfly XA Datasource Stats: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -41081,7 +41092,7 @@ "settings": {}, "uuid": "fb531bcf-99ee-444a-8cd1-08922ab1aae8" }, - "3942": { + "3943": { "varname": "wildfly_xa_datasource_stats_no_proxy", "caption": "Wildfly XA Datasource Stats: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -41090,7 +41101,7 @@ "settings": {}, "uuid": "dc09a732-186a-4f6a-85e7-738db06977cc" }, - "3943": { + "3944": { "varname": "wildfly_xa_datasource_stats_node", "caption": "Wildfly XA Datasource Stats: Node", "description": "WildFly node (host) when running in domain mode.", @@ -41101,7 +41112,7 @@ }, "uuid": "c2e21f08-2475-4ed3-ab72-08b87f1aa9d6" }, - "3944": { + "3945": { "varname": "wildfly_xa_datasource_stats_password", "caption": "Wildfly XA Datasource Stats: Password", "description": "WildFly management API password.", @@ -41112,7 +41123,7 @@ }, "uuid": "b5caa747-71b6-4115-b137-a5a3865fae64" }, - "3945": { + "3946": { "varname": "wildfly_xa_datasource_stats_proxy", "caption": "Wildfly XA Datasource Stats: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -41123,7 +41134,7 @@ }, "uuid": "4c1c3eb6-c4cf-4880-92ff-bc3e8ba708e1" }, - "3946": { + "3947": { "varname": "wildfly_xa_datasource_stats_timeout", "caption": "Wildfly XA Datasource Stats: Timeout", "description": "Network timeout in seconds.", @@ -41134,7 +41145,7 @@ }, "uuid": "2d516252-20b1-4ca0-9c91-6b287c8f6a92" }, - "3947": { + "3948": { "varname": "wildfly_xa_datasource_stats_url", "caption": "Wildfly XA Datasource Stats: URL", "description": "WildFly management API URL.", @@ -41145,7 +41156,7 @@ }, "uuid": "dce25737-8aab-4f08-8505-45faf1faaecb" }, - "3948": { + "3949": { "varname": "wildfly_xa_datasource_stats_username", "caption": "Wildfly XA Datasource Stats: Username", "description": "WildFly management API username.", @@ -41156,7 +41167,7 @@ }, "uuid": "00fa00c8-c527-4766-bc53-03eeda311a4c" }, - "3949": { + "3950": { "varname": "wildfly_xa_datasource_stats_warning", "caption": "Wildfly XA Datasource Stats: Warning", "description": "WARN threshold in percent.", @@ -41167,7 +41178,7 @@ }, "uuid": "6d8a6e64-a7f7-42e2-a255-b0b1c345a58d" }, - "3950": { + "3951": { "varname": "windows_version_windows_always_ok", "caption": "Windows Version: Always OK?", "description": "Always returns OK.", @@ -41176,7 +41187,7 @@ "settings": {}, "uuid": "4528daca-8ff7-42c5-820f-ac15053db2fc" }, - "3951": { + "3952": { "varname": "windows_version_windows_extended_support", "caption": "Windows Version: Extended Support?", "description": "Instead of the end of servicing (default), check for the end of the paid Extended Security Updates (ESU).", @@ -41185,7 +41196,7 @@ "settings": {}, "uuid": "fe2c026b-8568-492d-a918-21cb6e0d3326" }, - "3952": { + "3953": { "varname": "windows_version_windows_insecure", "caption": "Windows Version: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -41194,7 +41205,7 @@ "settings": {}, "uuid": "d782e438-82e3-45b1-9e07-4d30fbeb32be" }, - "3953": { + "3954": { "varname": "windows_version_windows_no_perfdata", "caption": "Windows Version: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -41203,7 +41214,7 @@ "settings": {}, "uuid": "aa99cfcb-2c4e-45e4-a8c7-d501c2aa1e85" }, - "3954": { + "3955": { "varname": "windows_version_windows_no_proxy", "caption": "Windows Version: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -41212,7 +41223,7 @@ "settings": {}, "uuid": "80134042-4ecc-45c5-8547-2a5a2ff9c413" }, - "3955": { + "3956": { "varname": "windows_version_windows_offset_eol", "caption": "Windows Version: Offset Eol", "description": "Alert n days before (\"-30\") or after an EOL date (\"30\" or \"+30\").", @@ -41223,7 +41234,7 @@ }, "uuid": "0cc1dc89-3093-447a-b05b-ef04c8cd3cd9" }, - "3956": { + "3957": { "varname": "windows_version_windows_proxy", "caption": "Windows Version: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -41234,7 +41245,7 @@ }, "uuid": "c3af60b5-731d-4ffd-a658-324d3194e8fc" }, - "3957": { + "3958": { "varname": "windows_version_windows_timeout", "caption": "Windows Version: Timeout", "description": "Network timeout in seconds.", @@ -41245,7 +41256,7 @@ }, "uuid": "0ec60154-a8e0-43a3-9011-27f25a75927f" }, - "3958": { + "3959": { "varname": "windows_version_windows_unreachable_severity", "caption": "Windows Version: Unreachable Severity", "description": "State to report when the online source is unreachable. What is used instead - bundled offline data, a cached copy, or nothing at all - is named in the output, and a clean result then only covers what that fallback could confirm.", @@ -41258,7 +41269,7 @@ }, "uuid": "df2e43f7-748c-43e8-935c-301e4c41a531" }, - "3959": { + "3960": { "varname": "wordpress_checksums_always_ok", "caption": "WordPress Checksums: Always OK?", "description": "Always returns OK.", @@ -41267,7 +41278,7 @@ "settings": {}, "uuid": "90564eb7-3af4-4f00-9e5b-c98e1bf2a1dd" }, - "3960": { + "3961": { "varname": "wordpress_checksums_cache_expire", "caption": "WordPress Checksums: Cache Expire", "description": "The amount of time after which the credential/data cache expires, in minutes. The published checksums of a released version never change, so this is about how often wordpress.org is asked, not about how current the answer is.", @@ -41278,7 +41289,7 @@ }, "uuid": "d01d64a6-0b93-4d74-8b8c-32361b81ae44" }, - "3961": { + "3962": { "varname": "wordpress_checksums_ignore", "caption": "WordPress Checksums: Ignore", "description": "Ignore files whose path matches this Python regular expression. Matched against `/`, where the component is `core` or the plugin's slug. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. Example: `--ignore=\"^my-plugin/\"` to accept one component. Example: `--ignore=\"^akismet/akismet\\.php$\"` to accept one file that was patched by hand.", @@ -41289,7 +41300,7 @@ }, "uuid": "10e37aea-fca6-4667-bfd0-0823ca445683" }, - "3962": { + "3963": { "varname": "wordpress_checksums_insecure", "caption": "WordPress Checksums: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -41298,7 +41309,7 @@ "settings": {}, "uuid": "125f589e-080e-45e4-8ce9-382cbf8d4b3e" }, - "3963": { + "3964": { "varname": "wordpress_checksums_lengthy", "caption": "WordPress Checksums: Lengthy?", "description": "Extended reporting.", @@ -41307,7 +41318,7 @@ "settings": {}, "uuid": "e03f54f4-c303-4d27-bf30-d0d9890a7807" }, - "3964": { + "3965": { "varname": "wordpress_checksums_match", "caption": "WordPress Checksums: Match", "description": "Only check files whose path matches this Python regular expression. Matched against `/`, where the component is `core` or the plugin's slug. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Example: `--match=\"^core/\"` to look at the core alone. Example: `--match=\"\\.php$\"` to look at the PHP files alone.", @@ -41318,7 +41329,7 @@ }, "uuid": "0d81d820-a057-420d-8393-82db52fa4c9e" }, - "3965": { + "3966": { "varname": "wordpress_checksums_no_checksum_data_severity", "caption": "WordPress Checksums: No Checksum Data Severity", "description": "State to report when no published checksums are available for a component and it could not be verified. The check still verifies everything it has checksums for, but a clean result then only covers those components, not the ones it had to skip. Applies where wordpress.org publishes nothing for a component, which is a permanent property of that component and nothing to fix on this host. A component wordpress.org could not be asked about is a different case and follows --unreachable-severity.", @@ -41331,7 +41342,7 @@ }, "uuid": "997da366-dc79-43d9-8e89-0e1bad6be47b" }, - "3966": { + "3967": { "varname": "wordpress_checksums_no_match_severity", "caption": "WordPress Checksums: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -41344,7 +41355,7 @@ }, "uuid": "1f5d7239-2c33-4503-8dac-eb9f8d643606" }, - "3967": { + "3968": { "varname": "wordpress_checksums_no_perfdata", "caption": "WordPress Checksums: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -41353,7 +41364,7 @@ "settings": {}, "uuid": "33b406a8-1f51-4b03-822d-efb2ad0a4ee2" }, - "3968": { + "3969": { "varname": "wordpress_checksums_no_proxy", "caption": "WordPress Checksums: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -41362,7 +41373,7 @@ "settings": {}, "uuid": "3dcd8373-3a7a-4b18-b014-f54425eb3105" }, - "3969": { + "3970": { "varname": "wordpress_checksums_path", "caption": "WordPress Checksums: Path", "description": "Local path to your WordPress installation, typically within your Webserver's Document Root. Default: the first installation found in /var/www/html/wordpress, /srv/www/htdocs/wordpress, /usr/share/wordpress, or one or two levels below /var/www.", @@ -41373,7 +41384,7 @@ }, "uuid": "c6ee4c1e-a0f5-4542-b319-3974976755b2" }, - "3970": { + "3971": { "varname": "wordpress_checksums_proxy", "caption": "WordPress Checksums: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -41384,7 +41395,7 @@ }, "uuid": "6696a2c1-46b8-4bc3-986a-f849b28b6911" }, - "3971": { + "3972": { "varname": "wordpress_checksums_severity", "caption": "WordPress Checksums: Severity", "description": "Severity for alerting. Applies to a file that does not match its published checksum. Raise it to `crit` on an installation nobody hand-patches, where a mismatch can only mean the files were tampered with.", @@ -41397,7 +41408,7 @@ }, "uuid": "f27e2094-47fa-4cbb-a454-740d4312141e" }, - "3972": { + "3973": { "varname": "wordpress_checksums_timeout", "caption": "WordPress Checksums: Timeout", "description": "Network timeout in seconds. Applies to a single request. The run as a whole is bounded by --total-timeout.", @@ -41408,7 +41419,7 @@ }, "uuid": "3c0f2d12-2f26-497a-aa28-50e39754cee9" }, - "3973": { + "3974": { "varname": "wordpress_checksums_total_timeout", "caption": "WordPress Checksums: Total Timeout", "description": "Seconds the run may spend asking wordpress.org, across all requests. One request is made per component, so a host that cannot reach wordpress.org would otherwise wait --timeout seconds per component and be killed by the monitoring agent before it printed anything. Components not reached within the budget are reported as unqueried, the same way a failed request is. Keep it below the timeout the monitoring agent grants the check. Raise it on an installation with many plugins on a slow link.", @@ -41419,7 +41430,7 @@ }, "uuid": "7bf6168f-5fbd-4560-a0d9-afb9ac4b65b2" }, - "3974": { + "3975": { "varname": "wordpress_checksums_unreachable_severity", "caption": "WordPress Checksums: Unreachable Severity", "description": "State to report when the online source is unreachable. What is used instead - bundled offline data, a cached copy, or nothing at all - is named in the output, and a clean result then only covers what that fallback could confirm. Covers both a component verified against an expired cached copy and one that could not be verified at all for want of one. Raise it where the host is expected to reach wordpress.org, so a broken egress rule or an expired proxy credential surfaces instead of quietly reducing what the check covers.", @@ -41432,7 +41443,7 @@ }, "uuid": "c1c8228f-8071-475d-b06d-6303f4345938" }, - "3975": { + "3976": { "varname": "wordpress_security_scan_always_ok", "caption": "WordPress Security Scan: Always OK?", "description": "Always returns OK.", @@ -41441,7 +41452,7 @@ "settings": {}, "uuid": "b4cd2297-aa62-4f87-ae17-a183f1b995eb" }, - "3976": { + "3977": { "varname": "wordpress_security_scan_api_token", "caption": "WordPress Security Scan: Api Token", "description": "WPScan API token, used to look up known vulnerabilities. Without a token the scan still runs, but reports no vulnerability data at all; the check then says so and --no-vuln-data-severity decides whether it alerts. Passed here, the token is visible to every user on this host for as long as the check runs, because a command-line argument shows up in the process list; prefer --api-token-file. It is handed on to wpscan through the environment either way, so it never reaches the scanner's own command line. Ignored where --enterprise-db-token names a locally held copy of the vulnerability database, because the scanner refuses to run with both. Falls back to the WPSCAN_API_TOKEN environment variable when neither this nor --api-token-file is given.", @@ -41452,7 +41463,7 @@ }, "uuid": "87d83b23-f778-4945-9ad2-cbe94b447209" }, - "3977": { + "3978": { "varname": "wordpress_security_scan_api_token_file", "caption": "WordPress Security Scan: Api Token File", "description": "Path to a file holding the WPScan API token, read from its first line. Keeps the token out of the process list, where a command-line argument is visible to every user on the host, and out of the monitoring configuration. Takes precedence over `--api-token`. Keep the file readable only by the monitoring user. Example: `--api-token-file=/etc/icinga2/secrets/wpscan`.", @@ -41463,7 +41474,7 @@ }, "uuid": "9484b1f8-021f-41c3-a623-11cb00e27280" }, - "3978": { + "3979": { "varname": "wordpress_security_scan_critical_cvss", "caption": "WordPress Security Scan: Critical CVSS", "description": "CVSS v3 base score at or above which a known vulnerability is reported as CRITICAL instead of WARNING. Vulnerabilities without a score are governed by --unscored-severity.", @@ -41474,7 +41485,7 @@ }, "uuid": "8aa1c6d6-822c-4ac9-a299-77c941663846" }, - "3979": { + "3980": { "varname": "wordpress_security_scan_enterprise_db_token", "caption": "WordPress Security Scan: Enterprise Db Token", "description": "Token for a locally held copy of the vulnerability database, used instead of the hosted one. The scanner downloads the database dumps with it and then looks vulnerabilities up locally, so the scan makes no request per finding and no daily quota applies. Rules --api-token out; where both are given, this one wins. Passed here, the token is visible to every user on this host for as long as the check runs, because a command-line argument shows up in the process list; prefer --enterprise-db-token-file. It is handed on to wpscan through the environment either way, so it never reaches the scanner's own command line. Falls back to the WPSCAN_ENTERPRISE_DB_TOKEN environment variable when neither this nor --enterprise-db-token-file is given.", @@ -41485,7 +41496,7 @@ }, "uuid": "6fb6cbf3-6a7c-497c-a280-ac2aa85c4af6" }, - "3980": { + "3981": { "varname": "wordpress_security_scan_enterprise_db_token_file", "caption": "WordPress Security Scan: Enterprise Db Token File", "description": "Path to a file holding the token for a locally held copy of the vulnerability database, read from its first line. Keeps the token out of the process list, where a command-line argument is visible to every user on the host, and out of the monitoring configuration. Takes precedence over `--enterprise-db-token`. Keep the file readable only by the monitoring user. Example: `--enterprise-db-token-file=/etc/icinga2/secrets/wpscan-enterprise`.", @@ -41496,7 +41507,7 @@ }, "uuid": "610315ba-9f71-425e-a791-2e52ce0be394" }, - "3981": { + "3982": { "varname": "wordpress_security_scan_ignore", "caption": "WordPress Security Scan: Ignore", "description": "Ignore findings whose component or title matches this Python regular expression. Matched against the component and against the finding title separately, so an anchored expression still works on either of the two. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. Example: `--ignore=\"^akismet$\"` to accept the risk of one component. Example: `--ignore=\"(?i)readme\"` to accept a reachable readme.", @@ -41507,7 +41518,7 @@ }, "uuid": "c6e8e672-6aac-4421-bfa8-21abf332950e" }, - "3982": { + "3983": { "varname": "wordpress_security_scan_insecure", "caption": "WordPress Security Scan: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -41516,7 +41527,7 @@ "settings": {}, "uuid": "108274e0-c06f-4552-96c9-4659a3667fc7" }, - "3983": { + "3984": { "varname": "wordpress_security_scan_lengthy", "caption": "WordPress Security Scan: Lengthy?", "description": "Extended reporting.", @@ -41525,7 +41536,7 @@ "settings": {}, "uuid": "169d33e2-31e1-4f68-a1ce-578c8aafd8ed" }, - "3984": { + "3985": { "varname": "wordpress_security_scan_match", "caption": "WordPress Security Scan: Match", "description": "Only check findings whose component or title matches this Python regular expression. Matched against the component and against the finding title separately, so an anchored expression still works on either of the two. Case-sensitive by default; use `(?i)` for case-insensitive matching. Can be specified multiple times. If both `--match` and `--ignore` are given, an item must match `--match` AND not match `--ignore` to be reported (include first, exclude second). Example: `--match=\"^WordPress$\"` to watch the core alone. Example: `--match=\"(?i)backup\"` to watch the exposed backups alone.", @@ -41536,7 +41547,7 @@ }, "uuid": "f385d4cc-30f1-4a8e-80a2-d1202909a00b" }, - "3985": { + "3986": { "varname": "wordpress_security_scan_no_match_severity", "caption": "WordPress Security Scan: No Match Severity", "description": "State to report when no item matches the filters and nothing is checked.", @@ -41549,7 +41560,7 @@ }, "uuid": "d5f66a58-f8e6-404a-8579-e4a8f8b280af" }, - "3986": { + "3987": { "varname": "wordpress_security_scan_no_perfdata", "caption": "WordPress Security Scan: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -41558,7 +41569,7 @@ "settings": {}, "uuid": "eaec6698-8749-46c4-b565-92fd66543319" }, - "3987": { + "3988": { "varname": "wordpress_security_scan_no_vuln_data_severity", "caption": "WordPress Security Scan: No Vuln Data Severity", "description": "State to report when the vulnerability database could not be queried and no vulnerability data is available. The check still reports everything it can determine without that data, but a clean result then only means nothing else was found, not that the target is free of known vulnerabilities.", @@ -41571,7 +41582,7 @@ }, "uuid": "4b11d929-c48d-40b5-9f76-35315c23b59a" }, - "3988": { + "3989": { "varname": "wordpress_security_scan_path", "caption": "WordPress Security Scan: Path", "description": "Local path to your WordPress installation, typically within your Webserver's Document Root. Read to determine the installed core version and the installed plugins and themes, which the remote scan on its own cannot see completely, and to determine the site URL when --url is not given. A path that does not exist is not an error: the check then reports what the remote scan found and says so. Default: the first installation found in /var/www/html/wordpress, /srv/www/htdocs/wordpress, /usr/share/wordpress, or one or two levels below /var/www.", @@ -41582,7 +41593,7 @@ }, "uuid": "50384668-fb06-4304-9fb6-3ff00a057882" }, - "3989": { + "3990": { "varname": "wordpress_security_scan_total_timeout", "caption": "WordPress Security Scan: Total Timeout", "description": "Seconds the run may spend scanning, across the refresh of the vulnerability database, the version probe and the scan itself. A full scan of a site with many plugins takes minutes, so this is much higher than the network timeout of other checks. The scanner is asked to give up shortly before the budget is out, so it still reports what it found rather than being killed with nothing to show. Keep it below the timeout the monitoring agent grants the check. Raise it on a large site, or narrow the scan with --wpscan-enumerate.", @@ -41593,7 +41604,7 @@ }, "uuid": "966dafb5-a50d-4977-b776-6f07c5a10338" }, - "3990": { + "3991": { "varname": "wordpress_security_scan_unscored_severity", "caption": "WordPress Security Scan: Unscored Severity", "description": "State to report for a finding that carries no severity score of its own. A source that scores its findings rarely scores all of them, and the unrated ones need a state of their own rather than the one a score would have earned them. Applies to a known vulnerability that carries no CVSS score. The vulnerability database leaves a large share of its entries unrated, so treating them all as critical would page for every one of them.", @@ -41606,7 +41617,7 @@ }, "uuid": "5e42290b-45a5-4f7e-b72c-dd7ac6cdfe8a" }, - "3991": { + "3992": { "varname": "wordpress_security_scan_url", "caption": "WordPress Security Scan: URL", "description": "URL of the WordPress site to scan. A URL without a scheme is completed to `https://`. If not specified, it is taken from the `WP_HOME` or `WP_SITEURL` constant of the installation below --path, which only works where the installation pins them and the configuration file is readable. Example: `--url=https://www.example.com`.", @@ -41617,7 +41628,7 @@ }, "uuid": "ace917b6-185b-4f2f-a854-a0381cf3f007" }, - "3992": { + "3993": { "varname": "wordpress_security_scan_verbose", "caption": "WordPress Security Scan: Verbose?", "description": "Makes this plugin verbose during the operation. Useful for debugging and seeing what is going on under the hood.", @@ -41626,7 +41637,7 @@ "settings": {}, "uuid": "404345b3-f30f-406b-992f-1958a35d7e30" }, - "3993": { + "3994": { "varname": "wordpress_security_scan_vuln_api_failure_severity", "caption": "WordPress Security Scan: Vuln Api Failure Severity", "description": "State to report when the vulnerability database refused the request or could not be reached: a token that was rejected or rotated, an exhausted daily request allowance, or an unreachable API. The scan itself still runs and everything it found still counts, but the vulnerability class is no longer being examined and nothing else says so. A run that was never given a token follows `--no-vuln-data-severity` instead, because that one was set up that way and is not a failure.", @@ -41639,7 +41650,7 @@ }, "uuid": "a83d7805-1959-4bca-9e8b-b12b29fb3341" }, - "3994": { + "3995": { "varname": "wordpress_security_scan_wpscan_detection_mode", "caption": "WordPress Security Scan: WPScan Detection Mode", "description": "How hard the scan looks for components. `passive` only reads what the site shows on its own, `aggressive` requests known file locations directly and finds the most, `mixed` does both. Aggressive detection produces far more requests and takes correspondingly longer, so raise --total-timeout with it.", @@ -41652,7 +41663,7 @@ }, "uuid": "72017484-86d1-478a-9501-c951d5dafbbc" }, - "3995": { + "3996": { "varname": "wordpress_security_scan_wpscan_enumerate", "caption": "WordPress Security Scan: WPScan Enumerate", "description": "What the scan looks for, comma-separated. Plugins: `vp` only the ones with a known vulnerability, `p` the popular ones, `ap` every one known. Themes: `vt`, `t` and `at` in the same order. Further: `tt` timthumb scripts, `cb` wp-config backups, `dbe` database exports, `bf` backup folders, `u` user names. `m` enumerates media files and is accepted, but this check reports nothing from it, so it only lengthens the scan. Only one choice per group: `vp`, `p` and `ap` rule each other out, as do `vt`, `t` and `at`. The wider the choice, the longer the scan takes, since each one probes for every location it knows: `ap` and `at` walk tens of thousands of them. `vp` and `vt` need vulnerability data and are downgraded to `p` and `t` when none is available. `bf` needs wpscan 4.0.0 or newer and is skipped on older releases. Example: `--wpscan-enumerate=cb,dbe,bf,u` looks only for exposed files and user names, which is the fastest useful scan.", @@ -41663,7 +41674,7 @@ }, "uuid": "b034ccd0-3653-4ee5-aea9-d483969578cf" }, - "3996": { + "3997": { "varname": "wordpress_security_scan_wpscan_follow_redirect", "caption": "WordPress Security Scan: WPScan Follow Redirect?", "description": "Scan the target the site redirects to, instead of reporting the redirection and stopping. A site that answers on `www.example.com` but serves itself under `example.com` needs this, as does a plain HTTP URL redirecting to HTTPS. Only one redirect is followed. Pointing --url at the final address is still preferable, because the scan then spends no request on the redirect at all.", @@ -41672,7 +41683,7 @@ "settings": {}, "uuid": "f6d3d97c-c9a3-4cef-9175-ca1f33b428de" }, - "3997": { + "3998": { "varname": "wordpress_security_scan_wpscan_http_auth", "caption": "WordPress Security Scan: WPScan Http Auth", "description": "Credentials for HTTP basic authentication in front of the site, as `login:password`. Unlike the API token, the scanner accepts these only on its command line, where they are visible to every user on the scanning host while the scan runs. Prefer --wpscan-http-auth-file, which at least keeps them out of the monitoring configuration.", @@ -41683,7 +41694,7 @@ }, "uuid": "0d396e5d-6e02-4df4-ad9b-0fcf76fd2109" }, - "3998": { + "3999": { "varname": "wordpress_security_scan_wpscan_http_auth_file", "caption": "WordPress Security Scan: WPScan Http Auth File", "description": "Path to a file holding the HTTP basic authentication credentials, as `login:password`, read from its first line. Takes precedence over `--wpscan-http-auth`. Keep the file readable only by the monitoring user. Example: `--wpscan-http-auth-file=/etc/icinga2/secrets/wordpress-http-auth`.", @@ -41694,7 +41705,7 @@ }, "uuid": "fbe90226-97ed-4951-aa81-465aac721b8c" }, - "3999": { + "4000": { "varname": "wordpress_security_scan_wpscan_ignore_main_redirect", "caption": "WordPress Security Scan: WPScan Ignore Main Redirect?", "description": "Scan the address given in --url even though it redirects elsewhere. Use it where the redirect is the very thing to look behind, for example a compromised site redirecting its visitors away. Has no effect where --wpscan-follow-redirect is set as well, which wins.", @@ -41703,7 +41714,7 @@ "settings": {}, "uuid": "02847abe-eeb3-409d-b1f1-54a4d3b0a3e7" }, - "4000": { + "4001": { "varname": "wordpress_security_scan_wpscan_no_update", "caption": "WordPress Security Scan: WPScan No Update?", "description": "Skip the refresh of the local vulnerability database before scanning. The check refreshes it on every run by default, so a site is graded against current data rather than against whatever was last downloaded. Use this where something else keeps the database current, or to save the download on a host that is scanned several times an hour. A refresh that fails is not an error: the scan runs against the local copy, and the check says so. A local copy that was never downloaded at all is different - the scanner then refuses to scan rather than fetching it, so run `wpscan --update` once by hand before setting this.", @@ -41712,7 +41723,7 @@ "settings": {}, "uuid": "35889eb8-6903-46ec-983b-98bb39f50033" }, - "4001": { + "4002": { "varname": "wordpress_security_scan_wpscan_option", "caption": "WordPress Security Scan: WPScan Option", "description": "Additional raw option to pass to the wpscan call, for options that have no dedicated parameter here. Use it only for options this check does not set itself. Passing one it does set, the target address or the output format above all, leaves the check with nothing it can read. Can be specified multiple times. Example: `--wpscan-option=--plugins-detection=aggressive`.", @@ -41723,7 +41734,7 @@ }, "uuid": "84ee7d12-7c4d-4fab-8b90-78e5e678baec" }, - "4002": { + "4003": { "varname": "wordpress_security_scan_wpscan_proxy", "caption": "WordPress Security Scan: WPScan Proxy", "description": "Proxy the scan goes through, as `protocol://host:port`. Example: `--wpscan-proxy=http://192.0.2.1:3128`.", @@ -41734,7 +41745,7 @@ }, "uuid": "2ec0bd47-cb12-4985-b9d2-c4fa59ceca77" }, - "4003": { + "4004": { "varname": "wordpress_security_scan_wpscan_random_user_agent", "caption": "WordPress Security Scan: WPScan Random User Agent?", "description": "Use a random user agent for the scan instead of the one --wpscan-user-agent sets. Only useful where a web application firewall blocks the scan outright, which the scanner reports as a 403. It makes the scan harder to recognize in the target's access log and impossible to allow-list, so the identifiable default is the better choice on a site you run yourself.", @@ -41743,7 +41754,7 @@ "settings": {}, "uuid": "5d36ba3e-2518-41a8-b1eb-a4e07e1fb156" }, - "4004": { + "4005": { "varname": "wordpress_security_scan_wpscan_throttle", "caption": "WordPress Security Scan: WPScan Throttle", "description": "Milliseconds to wait between requests, to keep the scan from overwhelming the target or tripping a rate limit. Has to be greater than zero. Setting it makes the scanner use a single thread instead of five, so the scan takes considerably longer; raise --total-timeout with it. Not throttled when unset. Example: `--wpscan-throttle=200`.", @@ -41754,7 +41765,7 @@ }, "uuid": "ac0314b0-e0b5-429e-a89a-3461783a354e" }, - "4005": { + "4006": { "varname": "wordpress_security_scan_wpscan_user_agent", "caption": "WordPress Security Scan: WPScan User Agent", "description": "How the scan identifies itself to the target. The default names the monitoring rather than the scanner, so the daily scan is recognizable in the target's access log and can be allow-listed in a web application firewall or in fail2ban.", @@ -41765,7 +41776,7 @@ }, "uuid": "055930aa-d9c4-4144-855e-138c04156f85" }, - "4006": { + "4007": { "varname": "wordpress_version_always_ok", "caption": "WordPress Version: Always OK?", "description": "Always returns OK.", @@ -41774,7 +41785,7 @@ "settings": {}, "uuid": "7d8ada7e-59ed-4cef-94a2-903f9c1ae35b" }, - "4007": { + "4008": { "varname": "wordpress_version_check_major", "caption": "WordPress Version: Check Major?", "description": "Alert when a new major release is available, even if the current version is not yet EOL. Example: running v26 (not yet EOL) and v27 is available.", @@ -41783,7 +41794,7 @@ "settings": {}, "uuid": "541aa998-1c9b-4f50-990c-f718fe53565c" }, - "4008": { + "4009": { "varname": "wordpress_version_check_minor", "caption": "WordPress Version: Check Minor?", "description": "Alert when a new major.minor release is available, even if the current version is not yet EOL. Example: running v26.2 (not yet EOL) and v26.3 is available.", @@ -41792,7 +41803,7 @@ "settings": {}, "uuid": "a1ab8273-c6f0-4aa3-95ee-09d231821d47" }, - "4009": { + "4010": { "varname": "wordpress_version_check_patch", "caption": "WordPress Version: Check Patch?", "description": "Alert when a new major.minor.patch release is available, even if the current version is not yet EOL. Example: running v26.2.7 (not yet EOL) and v26.2.8 is available.", @@ -41801,7 +41812,7 @@ "settings": {}, "uuid": "168c81dc-c13a-4b44-88e0-83773a63ee1a" }, - "4010": { + "4011": { "varname": "wordpress_version_insecure", "caption": "WordPress Version: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -41810,7 +41821,7 @@ "settings": {}, "uuid": "67e59651-f291-4473-af5d-96ee72298a1d" }, - "4011": { + "4012": { "varname": "wordpress_version_no_perfdata", "caption": "WordPress Version: No Perfdata?", "description": "Suppress the performance data section from the output. The status message and the exit code are unaffected, so alerting keeps working while trending data is dropped.", @@ -41819,7 +41830,7 @@ "settings": {}, "uuid": "e5c29bb6-56f3-4bb4-95a4-f5ae432925af" }, - "4012": { + "4013": { "varname": "wordpress_version_no_proxy", "caption": "WordPress Version: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -41828,7 +41839,7 @@ "settings": {}, "uuid": "3da558ee-761b-4949-bd4e-758c40eaf981" }, - "4013": { + "4014": { "varname": "wordpress_version_offset_eol", "caption": "WordPress Version: Offset Eol", "description": "Alert n days before (\"-30\") or after an EOL date (\"30\" or \"+30\").", @@ -41839,7 +41850,7 @@ }, "uuid": "4455a084-bd13-49a2-a633-e155d3b9e1c0" }, - "4014": { + "4015": { "varname": "wordpress_version_path", "caption": "WordPress Version: Path", "description": "Local path to your WordPress installation, typically within your Webserver's Document Root. Default: the first installation found in /var/www/html/wordpress, /srv/www/htdocs/wordpress, /usr/share/wordpress, or one or two levels below /var/www.", @@ -41850,7 +41861,7 @@ }, "uuid": "304adc53-1aa8-49d7-8f74-249596c748c9" }, - "4015": { + "4016": { "varname": "wordpress_version_proxy", "caption": "WordPress Version: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -41861,7 +41872,7 @@ }, "uuid": "e306c999-d85a-44fc-adce-aa6ab3f9a305" }, - "4016": { + "4017": { "varname": "wordpress_version_timeout", "caption": "WordPress Version: Timeout", "description": "Network timeout in seconds.", @@ -41872,7 +41883,7 @@ }, "uuid": "7feefd9f-7b32-490f-9bce-0233b6e1051e" }, - "4017": { + "4018": { "varname": "wordpress_version_unreachable_severity", "caption": "WordPress Version: Unreachable Severity", "description": "State to report when the online source is unreachable. What is used instead - bundled offline data, a cached copy, or nothing at all - is named in the output, and a clean result then only covers what that fallback could confirm.", @@ -41885,7 +41896,7 @@ }, "uuid": "0a526dd5-c7b4-422d-883e-92b90b5e4e12" }, - "4018": { + "4019": { "varname": "xca_cert_always_ok", "caption": "XCA Cert: Always OK?", "description": "Always returns OK.", @@ -41894,7 +41905,7 @@ "settings": {}, "uuid": "26650570-244c-4036-9bae-2602b9bc0b66" }, - "4019": { + "4020": { "varname": "xca_cert_critical", "caption": "XCA Cert: Critical", "description": "CRIT threshold for certificate expiration in days.", @@ -41905,7 +41916,7 @@ }, "uuid": "412817e0-89c2-44d6-95d9-6dfd7b732151" }, - "4020": { + "4021": { "varname": "xca_cert_defaults_file", "caption": "XCA Cert: Defaults File", "description": "Specifies a cnf file to read parameters like user, host and password from (for MySQL/MariaDB cnf-style files). Example: `--defaults-file=/var/spool/icinga2/.my.cnf`.", @@ -41916,7 +41927,7 @@ }, "uuid": "23f98558-b5d7-4319-8ff9-6db4e24eb48d" }, - "4021": { + "4022": { "varname": "xca_cert_defaults_group", "caption": "XCA Cert: Defaults Group", "description": "Group/section to read from in the cnf file.", @@ -41927,7 +41938,7 @@ }, "uuid": "23a43a96-7101-4cda-9723-527d21417dea" }, - "4022": { + "4023": { "varname": "xca_cert_prefix", "caption": "XCA Cert: Prefix", "description": "Table name prefix used in the XCA database.", @@ -41938,7 +41949,7 @@ }, "uuid": "4dd3234c-6696-4bec-93d3-7e898160b9ed" }, - "4023": { + "4024": { "varname": "xca_cert_timeout", "caption": "XCA Cert: Timeout", "description": "Network timeout in seconds.", @@ -41949,7 +41960,7 @@ }, "uuid": "ca414a44-11b1-48d6-9402-7593f7209baa" }, - "4024": { + "4025": { "varname": "xca_cert_warning", "caption": "XCA Cert: Warning", "description": "WARN threshold for certificate expiration in days.", @@ -41960,7 +41971,7 @@ }, "uuid": "579f9b7d-11ee-49f7-bcee-71aa0f027b61" }, - "4025": { + "4026": { "varname": "xml_always_ok", "caption": "Xml: Always OK?", "description": "Always returns OK.", @@ -41969,7 +41980,7 @@ "settings": {}, "uuid": "f7f3316c-e02e-47da-9b3f-107dd11ca6c6" }, - "4026": { + "4027": { "varname": "xml_expect", "caption": "Xml: Expect", "description": "Expected string at the XPath location. If omitted, just checks whether the XPath exists.", @@ -41980,7 +41991,7 @@ }, "uuid": "0cb3d712-2aca-4f69-9610-059a1fe66f13" }, - "4027": { + "4028": { "varname": "xml_insecure", "caption": "Xml: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -41989,7 +42000,7 @@ "settings": {}, "uuid": "fd1f82bf-dce2-40b8-a66e-ca151b2f9c5d" }, - "4028": { + "4029": { "varname": "xml_namespace", "caption": "Xml: Namespace", "description": "Namespace prefix-to-URI mapping for XPath expressions. Can be specified multiple times. Example: `--namespace=\"prefix1:https://schemas.xmlsoap.org/prefix1/\"`.", @@ -42000,7 +42011,7 @@ }, "uuid": "889f7a10-40a2-461d-8906-383196a1b394" }, - "4029": { + "4030": { "varname": "xml_no_proxy", "caption": "Xml: No Proxy?", "description": "Do not use a proxy, not even one the environment names. Overrides `--proxy`.", @@ -42009,7 +42020,7 @@ "settings": {}, "uuid": "3c62b88d-b224-4d79-b838-98e5d74b5797" }, - "4030": { + "4031": { "varname": "xml_password", "caption": "Xml: Password", "description": "HTTP Basic Auth password.", @@ -42020,7 +42031,7 @@ }, "uuid": "2b2b9626-e26d-4e4b-bba8-300d703c9e65" }, - "4031": { + "4032": { "varname": "xml_proxy", "caption": "Xml: Proxy", "description": "Proxy to reach the target through. The scheme defaults to `http` when omitted. Overrides the proxy the environment names (`http_proxy`, `https_proxy`, `all_proxy`) together with the exceptions it lists in `no_proxy`, and is itself overridden by `--no-proxy`. Without either parameter the environment applies. Credentials belong into the environment variable rather than here, because a command-line argument is visible to every user on the host. Example: `--proxy=http://proxy.example.com:3128`.", @@ -42031,7 +42042,7 @@ }, "uuid": "7b406f8e-d854-49bb-a213-7cb86d828358" }, - "4032": { + "4033": { "varname": "xml_timeout", "caption": "Xml: Timeout", "description": "Network timeout in seconds.", @@ -42042,7 +42053,7 @@ }, "uuid": "e64ea8a6-8cb6-4de8-98b5-9e99441d150f" }, - "4033": { + "4034": { "varname": "xml_url", "caption": "Xml: URL", "description": "XML endpoint URL.", @@ -42053,7 +42064,7 @@ }, "uuid": "7bc3f1e6-677e-4535-b275-e942fdfd0863" }, - "4034": { + "4035": { "varname": "xml_username", "caption": "Xml: Username", "description": "HTTP Basic Auth username.", @@ -42064,7 +42075,7 @@ }, "uuid": "9b01bebb-1216-4bc4-8e8c-71f671b83e66" }, - "4035": { + "4036": { "varname": "xml_xpath", "caption": "Xml: Xpath", "description": "XPath expression to query. Must point to a single value (attribute or node content). Lists/arrays are not supported.", @@ -42075,7 +42086,7 @@ }, "uuid": "26058fb3-54f1-482a-ab3f-131f21a9d71d" }, - "4036": { + "4037": { "varname": "notify_host_mail_datetime", "caption": "Notify Host Mail: Datetime", "description": "Set the message timestamp ($icinga.short_date_time$).", @@ -42086,7 +42097,7 @@ }, "uuid": "7c49d5b5-95a3-4a59-b1d5-55cbaf3a9e92" }, - "4037": { + "4038": { "varname": "notify_host_mail_host_address", "caption": "Notify Host Mail: Host Address", "description": "Set the IPv4 address of the host.", @@ -42097,7 +42108,7 @@ }, "uuid": "b3850233-d763-4fdc-bbcc-958c4022a6aa" }, - "4038": { + "4039": { "varname": "notify_host_mail_host_displayname", "caption": "Notify Host Mail: Host Displayname", "description": "Set the display name of the host ($host.display_name$).", @@ -42108,7 +42119,7 @@ }, "uuid": "5882ee9b-f972-4f9d-91f6-27285c114d1d" }, - "4039": { + "4040": { "varname": "notify_host_mail_host_output", "caption": "Notify Host Mail: Host Output", "description": "Set the host output ($host.output$).", @@ -42119,7 +42130,7 @@ }, "uuid": "cbe160a9-d039-4569-a464-7cc29e1634c5" }, - "4040": { + "4041": { "varname": "notify_host_mail_host_state", "caption": "Notify Host Mail: Host State", "description": "Set the host state ($host.state$).", @@ -42130,7 +42141,7 @@ }, "uuid": "d90cc693-c3f8-4160-9a67-753ece0334f9" }, - "4041": { + "4042": { "varname": "notify_host_mail_hostname", "caption": "Notify Host Mail: Hostname", "description": "Set the hostname ($host.name$).", @@ -42141,7 +42152,7 @@ }, "uuid": "9e0dd998-b28f-4aa0-b1ff-1f084f06854f" }, - "4042": { + "4043": { "varname": "notify_host_mail_icingaweb2_url", "caption": "Notify Host Mail: Icingaweb2 URL", "description": "Set the Icinga Web 2 URL. Example: `--icingaweb2-url=https://icinga.example.com/icingaweb2`.", @@ -42152,7 +42163,7 @@ }, "uuid": "d38f6881-dcd2-402a-966c-eadd6c085dd1" }, - "4043": { + "4044": { "varname": "notify_host_mail_insecure", "caption": "Notify Host Mail: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -42161,7 +42172,7 @@ "settings": {}, "uuid": "caec5c9b-8f5d-4ddb-b29f-a75c4c1fd5c6" }, - "4044": { + "4045": { "varname": "notify_host_mail_mail_encryption", "caption": "Notify Host Mail: Mail Encryption", "description": "Set how the connection to the mail server is encrypted. `none` sends the mail and the login in plaintext. `starttls` upgrades the connection with STARTTLS, which the server has to offer. `tls` encrypts the connection from the start (SMTPS, implicit TLS). The server certificate is verified unless `--insecure` is given. Example: `--mail-encryption=tls --mail-port=465`.", @@ -42174,7 +42185,7 @@ }, "uuid": "98c62b1c-0935-4cd3-8107-f9c7db76c85a" }, - "4045": { + "4046": { "varname": "notify_host_mail_mail_password", "caption": "Notify Host Mail: Mail Password", "description": "Set the mail server login password.", @@ -42185,7 +42196,7 @@ }, "uuid": "28aaf67a-b299-4957-8aa1-18674eeb7140" }, - "4046": { + "4047": { "varname": "notify_host_mail_mail_port", "caption": "Notify Host Mail: Mail Port", "description": "Set the mail server port.", @@ -42196,7 +42207,7 @@ }, "uuid": "18d17f0e-cf63-43c0-a42e-346eac8e291a" }, - "4047": { + "4048": { "varname": "notify_host_mail_mail_recipient", "caption": "Notify Host Mail: Mail Recipient", "description": "Set the mail recipient.", @@ -42207,7 +42218,7 @@ }, "uuid": "9ccd58df-49d3-4841-b197-44f79a6d5c09" }, - "4048": { + "4049": { "varname": "notify_host_mail_mail_sender", "caption": "Notify Host Mail: Mail Sender", "description": "Set the mail sender.", @@ -42218,7 +42229,7 @@ }, "uuid": "7966e1e3-3656-47a2-a6b6-233b9668d753" }, - "4049": { + "4050": { "varname": "notify_host_mail_mail_server", "caption": "Notify Host Mail: Mail Server", "description": "Set the mail server.", @@ -42229,7 +42240,7 @@ }, "uuid": "58ff4f1f-9c0e-4889-9ae1-6f56cdc4e002" }, - "4050": { + "4051": { "varname": "notify_host_mail_mail_user", "caption": "Notify Host Mail: Mail User", "description": "Set the mail server login user.", @@ -42240,7 +42251,7 @@ }, "uuid": "2cd70c96-abfc-4719-a831-42ee6fb069e5" }, - "4051": { + "4052": { "varname": "notify_host_mail_notes", "caption": "Notify Host Mail: Notes", "description": "Set the notes.", @@ -42251,7 +42262,7 @@ }, "uuid": "87f9867e-10c1-4787-8370-8470c173342e" }, - "4052": { + "4053": { "varname": "notify_host_mail_notes_url", "caption": "Notify Host Mail: Notes URL", "description": "Set the notes url.", @@ -42262,7 +42273,7 @@ }, "uuid": "18f4b127-9433-460d-914d-3feacec9666e" }, - "4053": { + "4054": { "varname": "notify_host_mail_notification_author", "caption": "Notify Host Mail: Notification Author", "description": "Set the author of the comment ($notification.author$).", @@ -42273,7 +42284,7 @@ }, "uuid": "b0d2315c-3113-4830-bf86-3e05f0af30c3" }, - "4054": { + "4055": { "varname": "notify_host_mail_notification_comment", "caption": "Notify Host Mail: Notification Comment", "description": "Set the comment ($notification.comment$).", @@ -42284,7 +42295,7 @@ }, "uuid": "9bcc9a5d-9e99-48c9-94fa-bfc96df100dc" }, - "4055": { + "4056": { "varname": "notify_host_mail_notification_type", "caption": "Notify Host Mail: Notification Type", "description": "Set the type of notification ($notification.type$). Example: `--notification-type=PROBLEM`.", @@ -42295,7 +42306,7 @@ }, "uuid": "b4693f94-f0df-4573-8911-7d1e4114d3bb" }, - "4056": { + "4057": { "varname": "notify_host_mail_perfdata", "caption": "Notify Host Mail: Perfdata", "description": "Set the perfdata.", @@ -42306,7 +42317,7 @@ }, "uuid": "458ac183-3b5f-44ab-9e01-ef958df0306e" }, - "4057": { + "4058": { "varname": "notify_host_mail_short", "caption": "Notify Host Mail: Short?", "description": "Send a short message. This can be useful when using an SMS relay, for example.", @@ -42315,7 +42326,7 @@ "settings": {}, "uuid": "b7859107-ff75-43bb-a165-018b33b8db03" }, - "4058": { + "4059": { "varname": "notify_host_rocketchat_datetime", "caption": "Notify Host Rocket.Chat: Datetime", "description": "Set the message timestamp ($icinga.short_date_time$).", @@ -42326,7 +42337,7 @@ }, "uuid": "3bf488b6-f17f-44ed-a36c-c44e135c5e82" }, - "4059": { + "4060": { "varname": "notify_host_rocketchat_host_displayname", "caption": "Notify Host Rocket.Chat: Host Displayname", "description": "Set the display name of the host ($host.display_name$).", @@ -42337,7 +42348,7 @@ }, "uuid": "a9dcf5dc-7a1f-4654-8159-73b1e6785581" }, - "4060": { + "4061": { "varname": "notify_host_rocketchat_host_output", "caption": "Notify Host Rocket.Chat: Host Output", "description": "Set the host output ($host.output$).", @@ -42348,7 +42359,7 @@ }, "uuid": "321f32eb-c33f-4d5c-9367-40acc772af17" }, - "4061": { + "4062": { "varname": "notify_host_rocketchat_host_state", "caption": "Notify Host Rocket.Chat: Host State", "description": "Set the host state ($host.state$).", @@ -42359,7 +42370,7 @@ }, "uuid": "bdea9ba1-5895-40c1-8fd6-6e675c42dcf4" }, - "4062": { + "4063": { "varname": "notify_host_rocketchat_hostname", "caption": "Notify Host Rocket.Chat: Hostname", "description": "Set the hostname ($host.name$).", @@ -42370,7 +42381,7 @@ }, "uuid": "c06de95a-3807-44fd-aa81-ddf2b81b7667" }, - "4063": { + "4064": { "varname": "notify_host_rocketchat_icingaweb2_url", "caption": "Notify Host Rocket.Chat: Icingaweb2 URL", "description": "Set the Icinga Web 2 URL. Example: `--icingaweb2-url=https://icinga.example.com/icingaweb2`.", @@ -42381,7 +42392,7 @@ }, "uuid": "b37d5a79-8136-475c-97f3-02a1841b02fb" }, - "4064": { + "4065": { "varname": "notify_host_rocketchat_notification_author", "caption": "Notify Host Rocket.Chat: Notification Author", "description": "Set the author of the comment ($notification.author$).", @@ -42392,7 +42403,7 @@ }, "uuid": "a9d7151f-7bb8-4a56-8ab9-532c7365244d" }, - "4065": { + "4066": { "varname": "notify_host_rocketchat_notification_comment", "caption": "Notify Host Rocket.Chat: Notification Comment", "description": "Set the comment ($notification.comment$).", @@ -42403,7 +42414,7 @@ }, "uuid": "8673bd05-4333-47bb-a803-2edd714481ec" }, - "4066": { + "4067": { "varname": "notify_host_rocketchat_rocketchat_mentions", "caption": "Notify Host Rocket.Chat: Rocket.Chat Mentions", "description": "Set the Rocket.Chat mentions. Can be specified multiple times.", @@ -42414,7 +42425,7 @@ }, "uuid": "caa7407b-c8ce-405a-b09e-1a5523ebac46" }, - "4067": { + "4068": { "varname": "notify_host_rocketchat_rocketchat_url", "caption": "Notify Host Rocket.Chat: Rocket.Chat URL", "description": "Set the Rocket.Chat Webhook API URL.", @@ -42425,7 +42436,7 @@ }, "uuid": "89ffe710-2c35-4431-a720-378f58da08d8" }, - "4068": { + "4069": { "varname": "notify_host_zoom_datetime", "caption": "Notify Host Zoom: Datetime", "description": "Set the message timestamp ($icinga.short_date_time$).", @@ -42436,7 +42447,7 @@ }, "uuid": "1dc103ba-061e-45b0-8807-450b5d18d076" }, - "4069": { + "4070": { "varname": "notify_host_zoom_host_displayname", "caption": "Notify Host Zoom: Host Displayname", "description": "Set the display name of the host ($host.display_name$).", @@ -42447,7 +42458,7 @@ }, "uuid": "3a029f6f-6bbf-4ade-a6ee-4d85a720bbfd" }, - "4070": { + "4071": { "varname": "notify_host_zoom_host_output", "caption": "Notify Host Zoom: Host Output", "description": "Set the host output ($host.output$).", @@ -42458,7 +42469,7 @@ }, "uuid": "df7480b7-ba16-43a1-800e-b5e94c4843c4" }, - "4071": { + "4072": { "varname": "notify_host_zoom_host_state", "caption": "Notify Host Zoom: Host State", "description": "Set the host state ($host.state$).", @@ -42469,7 +42480,7 @@ }, "uuid": "8b001424-355b-4d6f-8a3a-cf4c0daf94d6" }, - "4072": { + "4073": { "varname": "notify_host_zoom_hostname", "caption": "Notify Host Zoom: Hostname", "description": "Set the hostname ($host.name$).", @@ -42480,7 +42491,7 @@ }, "uuid": "c5015aae-704a-4b21-a341-0604662981e8" }, - "4073": { + "4074": { "varname": "notify_host_zoom_icingaweb2_url", "caption": "Notify Host Zoom: Icingaweb2 URL", "description": "Set the Icinga Web 2 URL. Example: `--icingaweb2-url=https://icinga.example.com/icingaweb2`.", @@ -42491,7 +42502,7 @@ }, "uuid": "374b2098-4d12-441e-b0f1-9cb308f630ec" }, - "4074": { + "4075": { "varname": "notify_host_zoom_notification_author", "caption": "Notify Host Zoom: Notification Author", "description": "Set the author of the comment ($notification.author$).", @@ -42502,7 +42513,7 @@ }, "uuid": "d1ecf1fc-3636-4697-a3bb-0f5a5cf2331e" }, - "4075": { + "4076": { "varname": "notify_host_zoom_notification_comment", "caption": "Notify Host Zoom: Notification Comment", "description": "Set the comment ($notification.comment$).", @@ -42513,7 +42524,7 @@ }, "uuid": "02bd83dc-7bc8-4315-b71c-99abb6c8e664" }, - "4076": { + "4077": { "varname": "notify_host_zoom_token", "caption": "Notify Host Zoom: Token", "description": "Set the Zoom verification token.", @@ -42524,7 +42535,7 @@ }, "uuid": "19874b5a-704a-4cc9-afbf-fc925c73068f" }, - "4077": { + "4078": { "varname": "notify_host_zoom_url", "caption": "Notify Host Zoom: URL", "description": "Set the URL of the Zoom Incoming Webhook API.", @@ -42535,7 +42546,7 @@ }, "uuid": "b26b76b2-b86e-4713-a988-093559efce3c" }, - "4078": { + "4079": { "varname": "notify_service_mail_datetime", "caption": "Notify Service Mail: Datetime", "description": "Set the message timestamp ($icinga.short_date_time$).", @@ -42546,7 +42557,7 @@ }, "uuid": "3c1ec08e-76d4-4d1b-8f34-8b61b81a6e90" }, - "4079": { + "4080": { "varname": "notify_service_mail_host_address", "caption": "Notify Service Mail: Host Address", "description": "Set the IPv4 address of the host.", @@ -42557,7 +42568,7 @@ }, "uuid": "66024778-e701-44d1-8aef-123e99459359" }, - "4080": { + "4081": { "varname": "notify_service_mail_host_displayname", "caption": "Notify Service Mail: Host Displayname", "description": "Set the display name of the host ($host.display_name$).", @@ -42568,7 +42579,7 @@ }, "uuid": "aa9ff090-363e-4618-b8b2-ddec5b92b991" }, - "4081": { + "4082": { "varname": "notify_service_mail_hostname", "caption": "Notify Service Mail: Hostname", "description": "Set the hostname ($host.name$).", @@ -42579,7 +42590,7 @@ }, "uuid": "69e0f1a8-e58d-4c87-ba03-da390cca7a54" }, - "4082": { + "4083": { "varname": "notify_service_mail_icingaweb2_url", "caption": "Notify Service Mail: Icingaweb2 URL", "description": "Set the Icinga Web 2 URL. Example: `--icingaweb2-url=https://icinga.example.com/icingaweb2`.", @@ -42590,7 +42601,7 @@ }, "uuid": "7862463c-4203-43f6-a793-35a6ef117d38" }, - "4083": { + "4084": { "varname": "notify_service_mail_insecure", "caption": "Notify Service Mail: Insecure?", "description": "This option explicitly allows insecure SSL connections.", @@ -42599,7 +42610,7 @@ "settings": {}, "uuid": "699cfa40-a6ec-4293-8d17-57086c453fe3" }, - "4084": { + "4085": { "varname": "notify_service_mail_mail_encryption", "caption": "Notify Service Mail: Mail Encryption", "description": "Set how the connection to the mail server is encrypted. `none` sends the mail and the login in plaintext. `starttls` upgrades the connection with STARTTLS, which the server has to offer. `tls` encrypts the connection from the start (SMTPS, implicit TLS). The server certificate is verified unless `--insecure` is given. Example: `--mail-encryption=tls --mail-port=465`.", @@ -42612,7 +42623,7 @@ }, "uuid": "aa87a618-7cc9-4cb0-a763-5a9007b804d0" }, - "4085": { + "4086": { "varname": "notify_service_mail_mail_password", "caption": "Notify Service Mail: Mail Password", "description": "Set the mail server login password.", @@ -42623,7 +42634,7 @@ }, "uuid": "c13a5c73-75ac-4430-a1e4-9499dc6994d1" }, - "4086": { + "4087": { "varname": "notify_service_mail_mail_port", "caption": "Notify Service Mail: Mail Port", "description": "Set the mail server port.", @@ -42634,7 +42645,7 @@ }, "uuid": "3a8c0a64-7096-48d9-b4cd-fc8ba1414d67" }, - "4087": { + "4088": { "varname": "notify_service_mail_mail_recipient", "caption": "Notify Service Mail: Mail Recipient", "description": "Set the mail recipient.", @@ -42645,7 +42656,7 @@ }, "uuid": "9cb3c90b-c98d-4944-a01b-d945117a9d5c" }, - "4088": { + "4089": { "varname": "notify_service_mail_mail_sender", "caption": "Notify Service Mail: Mail Sender", "description": "Set the mail sender.", @@ -42656,7 +42667,7 @@ }, "uuid": "47101b19-a796-49a0-8250-e0be667f0019" }, - "4089": { + "4090": { "varname": "notify_service_mail_mail_server", "caption": "Notify Service Mail: Mail Server", "description": "Set the mail server.", @@ -42667,7 +42678,7 @@ }, "uuid": "07602521-0369-4799-8a8e-7205fd1b3c0b" }, - "4090": { + "4091": { "varname": "notify_service_mail_mail_user", "caption": "Notify Service Mail: Mail User", "description": "Set the mail server login user.", @@ -42678,7 +42689,7 @@ }, "uuid": "fe4da4ed-4260-435e-b42d-8c4035bb3fb5" }, - "4091": { + "4092": { "varname": "notify_service_mail_notes", "caption": "Notify Service Mail: Notes", "description": "Set the notes.", @@ -42689,7 +42700,7 @@ }, "uuid": "febd67ec-becb-4045-aa4e-dd670b743658" }, - "4092": { + "4093": { "varname": "notify_service_mail_notes_url", "caption": "Notify Service Mail: Notes URL", "description": "Set the notes url.", @@ -42700,7 +42711,7 @@ }, "uuid": "ba4b03ed-2345-454a-8d7c-0d00a88427c4" }, - "4093": { + "4094": { "varname": "notify_service_mail_notification_author", "caption": "Notify Service Mail: Notification Author", "description": "Set the author of the comment ($notification.author$).", @@ -42711,7 +42722,7 @@ }, "uuid": "0607000a-38f8-408a-ba85-067b1528e4fa" }, - "4094": { + "4095": { "varname": "notify_service_mail_notification_comment", "caption": "Notify Service Mail: Notification Comment", "description": "Set the comment ($notification.comment$).", @@ -42722,7 +42733,7 @@ }, "uuid": "00741188-58d2-4ff6-8b25-45cb6caa8d16" }, - "4095": { + "4096": { "varname": "notify_service_mail_notification_type", "caption": "Notify Service Mail: Notification Type", "description": "Set the type of notification ($notification.type$). Example: `--notification-type=PROBLEM`.", @@ -42733,7 +42744,7 @@ }, "uuid": "deb99df3-e212-472b-bacc-443b8574436b" }, - "4096": { + "4097": { "varname": "notify_service_mail_perfdata", "caption": "Notify Service Mail: Perfdata", "description": "Set the perfdata.", @@ -42744,7 +42755,7 @@ }, "uuid": "6a7f991b-7d30-4866-801a-50db70409546" }, - "4097": { + "4098": { "varname": "notify_service_mail_service_displayname", "caption": "Notify Service Mail: Service Displayname", "description": "Set the display name of the service ($service.display_name$).", @@ -42755,7 +42766,7 @@ }, "uuid": "7f81c37d-605c-4c41-9db9-caaed198f8db" }, - "4098": { + "4099": { "varname": "notify_service_mail_service_output", "caption": "Notify Service Mail: Service Output", "description": "Set the service output ($service.output$).", @@ -42766,7 +42777,7 @@ }, "uuid": "58ef650d-fa0d-4019-a823-1cb1f279fd1f" }, - "4099": { + "4100": { "varname": "notify_service_mail_service_state", "caption": "Notify Service Mail: Service State", "description": "Set the service state ($service.state$).", @@ -42777,7 +42788,7 @@ }, "uuid": "96c25daf-e85f-43fa-b09e-7a59387dee76" }, - "4100": { + "4101": { "varname": "notify_service_mail_servicename", "caption": "Notify Service Mail: Servicename", "description": "Set the servicename ($service.name$).", @@ -42788,7 +42799,7 @@ }, "uuid": "e4357877-605f-41c7-9641-22113897847a" }, - "4101": { + "4102": { "varname": "notify_service_mail_short", "caption": "Notify Service Mail: Short?", "description": "Send a short message. This can be useful when using an SMS relay, for example.", @@ -42797,7 +42808,7 @@ "settings": {}, "uuid": "03d9c9ef-b221-4d72-b9db-ffd905e2b784" }, - "4102": { + "4103": { "varname": "notify_service_rocketchat_datetime", "caption": "Notify Service Rocket.Chat: Datetime", "description": "Set the message timestamp ($icinga.short_date_time$).", @@ -42808,7 +42819,7 @@ }, "uuid": "cebdfe9c-e557-40b8-b826-347b61d3d59f" }, - "4103": { + "4104": { "varname": "notify_service_rocketchat_host_displayname", "caption": "Notify Service Rocket.Chat: Host Displayname", "description": "Set the display name of the host ($host.display_name$).", @@ -42819,7 +42830,7 @@ }, "uuid": "f9142a0f-df18-4c31-a12f-55414823f6a4" }, - "4104": { + "4105": { "varname": "notify_service_rocketchat_hostname", "caption": "Notify Service Rocket.Chat: Hostname", "description": "Set the hostname ($host.name$).", @@ -42830,7 +42841,7 @@ }, "uuid": "df22bd57-5e3e-4e53-b7c4-af8318226dd2" }, - "4105": { + "4106": { "varname": "notify_service_rocketchat_icingaweb2_url", "caption": "Notify Service Rocket.Chat: Icingaweb2 URL", "description": "Set the Icinga Web 2 URL. Example: `--icingaweb2-url=https://icinga.example.com/icingaweb2`.", @@ -42841,7 +42852,7 @@ }, "uuid": "3b9c8c8d-27f0-4582-8827-511747a5af44" }, - "4106": { + "4107": { "varname": "notify_service_rocketchat_notification_author", "caption": "Notify Service Rocket.Chat: Notification Author", "description": "Set the author of the comment ($notification.author$).", @@ -42852,7 +42863,7 @@ }, "uuid": "c37636de-33fc-471f-bade-0b90119c74d6" }, - "4107": { + "4108": { "varname": "notify_service_rocketchat_notification_comment", "caption": "Notify Service Rocket.Chat: Notification Comment", "description": "Set the comment ($notification.comment$).", @@ -42863,7 +42874,7 @@ }, "uuid": "1edaeb9e-4a66-4d8d-bf23-59540e2ffa6e" }, - "4108": { + "4109": { "varname": "notify_service_rocketchat_rocketchat_mentions", "caption": "Notify Service Rocket.Chat: Rocket.Chat Mentions", "description": "Set the Rocket.Chat mentions. Can be specified multiple times.", @@ -42874,7 +42885,7 @@ }, "uuid": "08437f2f-f8fa-4f7c-95be-d80a3ce62c0b" }, - "4109": { + "4110": { "varname": "notify_service_rocketchat_rocketchat_url", "caption": "Notify Service Rocket.Chat: Rocket.Chat URL", "description": "Set the Rocket.Chat Webhook API URL.", @@ -42885,7 +42896,7 @@ }, "uuid": "0435afb2-b76a-4e2e-8197-e6f689aaf7ca" }, - "4110": { + "4111": { "varname": "notify_service_rocketchat_service_output", "caption": "Notify Service Rocket.Chat: Service Output", "description": "Set the service output ($service.output$).", @@ -42896,7 +42907,7 @@ }, "uuid": "3645619d-2aeb-4d6f-ada8-53251ba95f68" }, - "4111": { + "4112": { "varname": "notify_service_rocketchat_service_state", "caption": "Notify Service Rocket.Chat: Service State", "description": "Set the service state ($service.state$).", @@ -42907,7 +42918,7 @@ }, "uuid": "a72e8166-8479-4976-a2a7-d6651d452abb" }, - "4112": { + "4113": { "varname": "notify_service_rocketchat_servicename", "caption": "Notify Service Rocket.Chat: Servicename", "description": "Set the servicename ($service.name$).", @@ -42918,7 +42929,7 @@ }, "uuid": "de24f533-b906-4562-9bc4-ef7e247524bd" }, - "4113": { + "4114": { "varname": "notify_service_zoom_datetime", "caption": "Notify Service Zoom: Datetime", "description": "Set the message timestamp ($icinga.short_date_time$).", @@ -42929,7 +42940,7 @@ }, "uuid": "039746aa-09e2-4ca2-9c4f-3c35552ed9ec" }, - "4114": { + "4115": { "varname": "notify_service_zoom_host_displayname", "caption": "Notify Service Zoom: Host Displayname", "description": "Set the display name of the host ($host.display_name$).", @@ -42940,7 +42951,7 @@ }, "uuid": "35a3b991-5208-4663-8101-0088904be79f" }, - "4115": { + "4116": { "varname": "notify_service_zoom_hostname", "caption": "Notify Service Zoom: Hostname", "description": "Set the hostname ($host.name$).", @@ -42951,7 +42962,7 @@ }, "uuid": "eb611761-dc8d-425d-aad3-482e4160fd71" }, - "4116": { + "4117": { "varname": "notify_service_zoom_icingaweb2_url", "caption": "Notify Service Zoom: Icingaweb2 URL", "description": "Set the Icinga Web 2 URL. Example: `--icingaweb2-url=https://icinga.example.com/icingaweb2`.", @@ -42962,7 +42973,7 @@ }, "uuid": "b28e3c98-ed67-4a4c-a03d-287beba1c186" }, - "4117": { + "4118": { "varname": "notify_service_zoom_notification_author", "caption": "Notify Service Zoom: Notification Author", "description": "Set the author of the comment ($notification.author$).", @@ -42973,7 +42984,7 @@ }, "uuid": "cd0e81c2-d8ff-4d24-beed-8d05b08093bb" }, - "4118": { + "4119": { "varname": "notify_service_zoom_notification_comment", "caption": "Notify Service Zoom: Notification Comment", "description": "Set the comment ($notification.comment$).", @@ -42984,7 +42995,7 @@ }, "uuid": "e54256c1-b7e8-4092-8f65-b8dda2599de2" }, - "4119": { + "4120": { "varname": "notify_service_zoom_service_displayname", "caption": "Notify Service Zoom: Service Displayname", "description": "Set the display name of the service ($service.display_name$).", @@ -42995,7 +43006,7 @@ }, "uuid": "ae35c865-81a0-44cf-bbe9-0d8329fbfd38" }, - "4120": { + "4121": { "varname": "notify_service_zoom_service_output", "caption": "Notify Service Zoom: Service Output", "description": "Set the service output ($service.output$).", @@ -43006,7 +43017,7 @@ }, "uuid": "cf1f4210-0e03-4855-93ce-89a0e1b3b69d" }, - "4121": { + "4122": { "varname": "notify_service_zoom_service_state", "caption": "Notify Service Zoom: Service State", "description": "Set the service state ($service.state$).", @@ -43017,7 +43028,7 @@ }, "uuid": "4a427506-3e75-40b5-8f0d-f504186569c4" }, - "4122": { + "4123": { "varname": "notify_service_zoom_servicename", "caption": "Notify Service Zoom: Servicename", "description": "Set the servicename ($service.name$).", @@ -43028,7 +43039,7 @@ }, "uuid": "83a29ae6-456a-4e1a-8f13-734eb5ddb045" }, - "4123": { + "4124": { "varname": "notify_service_zoom_token", "caption": "Notify Service Zoom: Token", "description": "Set the Zoom verification token.", @@ -43039,7 +43050,7 @@ }, "uuid": "af235a58-ec8a-4f06-8d1b-b39c1ed88a88" }, - "4124": { + "4125": { "varname": "notify_service_zoom_url", "caption": "Notify Service Zoom: URL", "description": "Set the URL of the Zoom Incoming Webhook API.", @@ -64759,6 +64770,9 @@ }, "--warning-miss-ratio": { "value": "$mysql_innodb_buffer_pool_size_warning_miss_ratio$" + }, + "--warning-waits": { + "value": "$mysql_innodb_buffer_pool_size_warning_waits$" } }, "command": "/usr/lib64/nagios/plugins/mysql-innodb-buffer-pool-size", @@ -64803,6 +64817,11 @@ "datafield_id": 2279, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2280, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -64842,11 +64861,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-innodb-log-waits", "disabled": false, "fields": [ - { - "datafield_id": 2280, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2281, "is_required": "n", @@ -64876,6 +64890,11 @@ "datafield_id": 2286, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2287, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -64912,11 +64931,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-joins", "disabled": false, "fields": [ - { - "datafield_id": 2287, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2288, "is_required": "n", @@ -64941,6 +64955,11 @@ "datafield_id": 2292, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2293, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -65046,11 +65065,6 @@ "command": "/usr/bin/sudo /usr/lib64/nagios/plugins/mysql-logfile", "disabled": false, "fields": [ - { - "datafield_id": 2293, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2294, "is_required": "n", @@ -65185,6 +65199,11 @@ "datafield_id": 2320, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2321, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -65231,11 +65250,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-long-queries", "disabled": false, "fields": [ - { - "datafield_id": 2321, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2322, "is_required": "n", @@ -65275,6 +65289,11 @@ "datafield_id": 2329, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2330, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -65317,11 +65336,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-memory", "disabled": false, "fields": [ - { - "datafield_id": 2330, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2331, "is_required": "n", @@ -65356,6 +65370,11 @@ "datafield_id": 2337, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2338, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -65395,11 +65414,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-open-files", "disabled": false, "fields": [ - { - "datafield_id": 2338, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2339, "is_required": "n", @@ -65429,6 +65443,11 @@ "datafield_id": 2344, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2345, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -65468,11 +65487,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-perf-metrics", "disabled": false, "fields": [ - { - "datafield_id": 2345, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2346, "is_required": "n", @@ -65502,6 +65516,11 @@ "datafield_id": 2351, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2352, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -65547,11 +65566,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-query", "disabled": false, "fields": [ - { - "datafield_id": 2352, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2353, "is_required": "n", @@ -65591,6 +65605,11 @@ "datafield_id": 2360, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2361, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -65633,11 +65652,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-replica-status", "disabled": false, "fields": [ - { - "datafield_id": 2361, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2362, "is_required": "n", @@ -65672,6 +65686,11 @@ "datafield_id": 2368, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2369, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -65711,11 +65730,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-slow-queries", "disabled": false, "fields": [ - { - "datafield_id": 2369, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2370, "is_required": "n", @@ -65745,6 +65759,11 @@ "datafield_id": 2375, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2376, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -65784,11 +65803,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-sorts", "disabled": false, "fields": [ - { - "datafield_id": 2376, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2377, "is_required": "n", @@ -65818,6 +65832,11 @@ "datafield_id": 2382, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2383, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -65874,11 +65893,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-storage-engines", "disabled": false, "fields": [ - { - "datafield_id": 2383, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2384, "is_required": "n", @@ -65933,6 +65947,11 @@ "datafield_id": 2394, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2395, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -65961,17 +65980,17 @@ "disabled": false, "fields": [ { - "datafield_id": 2395, + "datafield_id": 2396, "is_required": "n", "var_filter": null }, { - "datafield_id": 2396, + "datafield_id": 2397, "is_required": "n", "var_filter": null }, { - "datafield_id": 2397, + "datafield_id": 2398, "is_required": "n", "var_filter": null } @@ -66013,11 +66032,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-table-cache", "disabled": false, "fields": [ - { - "datafield_id": 2398, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2399, "is_required": "n", @@ -66047,6 +66061,11 @@ "datafield_id": 2404, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2405, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -66080,11 +66099,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-table-definition-cache", "disabled": false, "fields": [ - { - "datafield_id": 2405, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2406, "is_required": "n", @@ -66104,6 +66118,11 @@ "datafield_id": 2409, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2410, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -66154,11 +66173,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-table-indexes", "disabled": false, "fields": [ - { - "datafield_id": 2410, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2411, "is_required": "n", @@ -66203,6 +66217,11 @@ "datafield_id": 2419, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2420, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -66242,11 +66261,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-table-locks", "disabled": false, "fields": [ - { - "datafield_id": 2420, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2421, "is_required": "n", @@ -66276,6 +66290,11 @@ "datafield_id": 2426, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2427, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -66315,11 +66334,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-temp-tables", "disabled": false, "fields": [ - { - "datafield_id": 2427, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2428, "is_required": "n", @@ -66349,6 +66363,11 @@ "datafield_id": 2433, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2434, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -66388,11 +66407,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-thread-cache", "disabled": false, "fields": [ - { - "datafield_id": 2434, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2435, "is_required": "n", @@ -66422,6 +66436,11 @@ "datafield_id": 2440, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2441, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -66464,11 +66483,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-tls", "disabled": false, "fields": [ - { - "datafield_id": 2441, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2442, "is_required": "n", @@ -66503,6 +66517,11 @@ "datafield_id": 2448, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2449, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -66536,11 +66555,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-traffic", "disabled": false, "fields": [ - { - "datafield_id": 2449, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2450, "is_required": "n", @@ -66560,6 +66574,11 @@ "datafield_id": 2453, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2454, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -66596,11 +66615,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-user-security", "disabled": false, "fields": [ - { - "datafield_id": 2454, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2455, "is_required": "n", @@ -66625,6 +66639,11 @@ "datafield_id": 2459, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2460, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -66676,11 +66695,6 @@ "command": "/usr/lib64/nagios/plugins/mysql-version", "disabled": false, "fields": [ - { - "datafield_id": 2460, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2461, "is_required": "n", @@ -66730,6 +66744,11 @@ "datafield_id": 2470, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2471, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -66758,17 +66777,17 @@ "disabled": false, "fields": [ { - "datafield_id": 2471, + "datafield_id": 2472, "is_required": "n", "var_filter": null }, { - "datafield_id": 2472, + "datafield_id": 2473, "is_required": "n", "var_filter": null }, { - "datafield_id": 2473, + "datafield_id": 2474, "is_required": "n", "var_filter": null } @@ -66796,12 +66815,12 @@ "disabled": false, "fields": [ { - "datafield_id": 2474, + "datafield_id": 2475, "is_required": "n", "var_filter": null }, { - "datafield_id": 2475, + "datafield_id": 2476, "is_required": "n", "var_filter": null } @@ -66842,11 +66861,6 @@ "command": "/usr/lib64/nagios/plugins/network-connections", "disabled": false, "fields": [ - { - "datafield_id": 2476, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2477, "is_required": "n", @@ -66871,6 +66885,11 @@ "datafield_id": 2481, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2482, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -66909,11 +66928,6 @@ "command": "C:\\Program Files\\icinga2\\sbin\\linuxfabrik\\network-connections.exe", "disabled": false, "fields": [ - { - "datafield_id": 2482, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2483, "is_required": "n", @@ -66938,6 +66952,11 @@ "datafield_id": 2487, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2488, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -66979,11 +66998,6 @@ "command": "/usr/lib64/nagios/plugins/network-errors", "disabled": false, "fields": [ - { - "datafield_id": 2488, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2489, "is_required": "n", @@ -67013,6 +67027,11 @@ "datafield_id": 2494, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2495, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -67054,11 +67073,6 @@ "command": "C:\\Program Files\\icinga2\\sbin\\linuxfabrik\\network-errors.exe", "disabled": false, "fields": [ - { - "datafield_id": 2495, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2496, "is_required": "n", @@ -67088,6 +67102,11 @@ "datafield_id": 2501, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2502, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -67128,11 +67147,6 @@ "command": "/usr/lib64/nagios/plugins/network-io", "disabled": false, "fields": [ - { - "datafield_id": 2502, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2503, "is_required": "n", @@ -67162,6 +67176,11 @@ "datafield_id": 2508, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2509, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -67202,11 +67221,6 @@ "command": "C:\\Program Files\\icinga2\\sbin\\linuxfabrik\\network-io.exe", "disabled": false, "fields": [ - { - "datafield_id": 2509, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2510, "is_required": "n", @@ -67236,6 +67250,11 @@ "datafield_id": 2515, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2516, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -67275,11 +67294,6 @@ "command": "/usr/lib64/nagios/plugins/network-port-tcp", "disabled": false, "fields": [ - { - "datafield_id": 2516, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2517, "is_required": "n", @@ -67309,6 +67323,11 @@ "datafield_id": 2522, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2523, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -67348,11 +67367,6 @@ "command": "C:\\Program Files\\icinga2\\sbin\\linuxfabrik\\network-port-tcp.exe", "disabled": false, "fields": [ - { - "datafield_id": 2523, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2524, "is_required": "n", @@ -67382,6 +67396,11 @@ "datafield_id": 2529, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2530, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -67432,11 +67451,6 @@ "command": "/usr/bin/sudo /usr/lib64/nagios/plugins/nextcloud-app-updates", "disabled": false, "fields": [ - { - "datafield_id": 2530, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2531, "is_required": "n", @@ -67481,6 +67495,11 @@ "datafield_id": 2539, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2540, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -67520,11 +67539,6 @@ "command": "/usr/bin/sudo /usr/lib64/nagios/plugins/nextcloud-enterprise", "disabled": false, "fields": [ - { - "datafield_id": 2540, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2541, "is_required": "n", @@ -67554,6 +67568,11 @@ "datafield_id": 2546, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2547, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -67596,11 +67615,6 @@ "command": "/usr/lib64/nagios/plugins/nextcloud-security-scan", "disabled": false, "fields": [ - { - "datafield_id": 2547, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2548, "is_required": "n", @@ -67633,6 +67647,11 @@ }, { "datafield_id": 2554, + "is_required": "n", + "var_filter": null + }, + { + "datafield_id": 2555, "is_required": "y", "var_filter": null } @@ -67703,11 +67722,6 @@ "command": "/usr/lib64/nagios/plugins/nextcloud-stats", "disabled": false, "fields": [ - { - "datafield_id": 2555, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2556, "is_required": "n", @@ -67725,12 +67739,12 @@ }, { "datafield_id": 2559, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 2560, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -67757,6 +67771,11 @@ "datafield_id": 2565, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2566, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -67805,11 +67824,6 @@ "command": "/usr/lib64/nagios/plugins/nextcloud-status", "disabled": false, "fields": [ - { - "datafield_id": 2566, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2567, "is_required": "n", @@ -67854,6 +67868,11 @@ "datafield_id": 2575, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2576, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -67908,11 +67927,6 @@ "command": "/usr/bin/sudo /usr/lib64/nagios/plugins/nextcloud-version", "disabled": false, "fields": [ - { - "datafield_id": 2576, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2577, "is_required": "n", @@ -67967,6 +67981,11 @@ "datafield_id": 2587, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2588, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -68020,11 +68039,6 @@ "command": "/usr/lib64/nagios/plugins/nfs-exports", "disabled": false, "fields": [ - { - "datafield_id": 2588, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2589, "is_required": "n", @@ -68074,6 +68088,11 @@ "datafield_id": 2598, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2599, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -68127,11 +68146,6 @@ "command": "/usr/lib64/nagios/plugins/nfs-mounts", "disabled": false, "fields": [ - { - "datafield_id": 2599, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2600, "is_required": "n", @@ -68181,6 +68195,11 @@ "datafield_id": 2609, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2610, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -68223,11 +68242,6 @@ "command": "/usr/lib64/nagios/plugins/nginx-disclosure", "disabled": false, "fields": [ - { - "datafield_id": 2610, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2611, "is_required": "n", @@ -68262,6 +68276,11 @@ "datafield_id": 2617, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2618, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -68309,11 +68328,6 @@ "command": "/usr/lib64/nagios/plugins/nginx-security", "disabled": false, "fields": [ - { - "datafield_id": 2618, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2619, "is_required": "n", @@ -68353,6 +68367,11 @@ "datafield_id": 2626, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2627, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -68415,11 +68434,6 @@ "command": "/usr/lib64/nagios/plugins/nginx-status", "disabled": false, "fields": [ - { - "datafield_id": 2627, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2628, "is_required": "n", @@ -68459,6 +68473,11 @@ "datafield_id": 2635, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2636, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -68510,11 +68529,6 @@ "command": "/usr/lib64/nagios/plugins/nodebb-cache", "disabled": false, "fields": [ - { - "datafield_id": 2636, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2637, "is_required": "n", @@ -68552,18 +68566,23 @@ }, { "datafield_id": 2644, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 2645, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 2646, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2647, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -68615,11 +68634,6 @@ "command": "/usr/lib64/nagios/plugins/nodebb-database", "disabled": false, "fields": [ - { - "datafield_id": 2647, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2648, "is_required": "n", @@ -68657,18 +68671,23 @@ }, { "datafield_id": 2655, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 2656, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 2657, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2658, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -68714,11 +68733,6 @@ "command": "/usr/lib64/nagios/plugins/nodebb-errors", "disabled": false, "fields": [ - { - "datafield_id": 2658, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2659, "is_required": "n", @@ -68751,11 +68765,16 @@ }, { "datafield_id": 2665, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 2666, + "is_required": "y", + "var_filter": null + }, + { + "datafield_id": 2667, "is_required": "n", "var_filter": null } @@ -68797,11 +68816,6 @@ "command": "/usr/lib64/nagios/plugins/nodebb-events", "disabled": false, "fields": [ - { - "datafield_id": 2667, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2668, "is_required": "n", @@ -68824,11 +68838,16 @@ }, { "datafield_id": 2672, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 2673, + "is_required": "y", + "var_filter": null + }, + { + "datafield_id": 2674, "is_required": "n", "var_filter": null } @@ -68873,11 +68892,6 @@ "command": "/usr/lib64/nagios/plugins/nodebb-groups", "disabled": false, "fields": [ - { - "datafield_id": 2674, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2675, "is_required": "n", @@ -68905,11 +68919,16 @@ }, { "datafield_id": 2680, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 2681, + "is_required": "y", + "var_filter": null + }, + { + "datafield_id": 2682, "is_required": "n", "var_filter": null } @@ -68960,11 +68979,6 @@ "command": "/usr/lib64/nagios/plugins/nodebb-info", "disabled": false, "fields": [ - { - "datafield_id": 2682, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2683, "is_required": "n", @@ -68997,18 +69011,23 @@ }, { "datafield_id": 2689, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 2690, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 2691, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2692, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -69054,11 +69073,6 @@ "command": "/usr/lib64/nagios/plugins/nodebb-users", "disabled": false, "fields": [ - { - "datafield_id": 2692, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2693, "is_required": "n", @@ -69091,11 +69105,16 @@ }, { "datafield_id": 2699, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 2700, + "is_required": "y", + "var_filter": null + }, + { + "datafield_id": 2701, "is_required": "n", "var_filter": null } @@ -69140,11 +69159,6 @@ "command": "/usr/lib64/nagios/plugins/nodebb-version", "disabled": false, "fields": [ - { - "datafield_id": 2701, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2702, "is_required": "n", @@ -69179,6 +69193,11 @@ "datafield_id": 2708, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2709, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -69227,11 +69246,6 @@ "command": "/usr/lib64/nagios/plugins/ntp-chronyd", "disabled": false, "fields": [ - { - "datafield_id": 2709, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2710, "is_required": "n", @@ -69276,6 +69290,11 @@ "datafield_id": 2718, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2719, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -69324,11 +69343,6 @@ "command": "/usr/lib64/nagios/plugins/ntp-ntpd", "disabled": false, "fields": [ - { - "datafield_id": 2719, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2720, "is_required": "n", @@ -69373,6 +69387,11 @@ "datafield_id": 2728, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2729, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -69409,11 +69428,6 @@ "command": "/usr/lib64/nagios/plugins/ntp-offset", "disabled": false, "fields": [ - { - "datafield_id": 2729, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2730, "is_required": "n", @@ -69438,6 +69452,11 @@ "datafield_id": 2734, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2735, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -69474,11 +69493,6 @@ "command": "C:\\Program Files\\icinga2\\sbin\\linuxfabrik\\ntp-offset.exe", "disabled": false, "fields": [ - { - "datafield_id": 2735, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2736, "is_required": "n", @@ -69503,6 +69517,11 @@ "datafield_id": 2740, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2741, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -69539,11 +69558,6 @@ "command": "/usr/lib64/nagios/plugins/ntp-systemd-timesyncd", "disabled": false, "fields": [ - { - "datafield_id": 2741, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2742, "is_required": "n", @@ -69568,6 +69582,11 @@ "datafield_id": 2746, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2747, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -69610,11 +69629,6 @@ "command": "C:\\Program Files\\icinga2\\sbin\\linuxfabrik\\ntp-w32tm.exe", "disabled": false, "fields": [ - { - "datafield_id": 2747, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2748, "is_required": "n", @@ -69649,6 +69663,11 @@ "datafield_id": 2754, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2755, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -69688,11 +69707,6 @@ "command": "/usr/lib64/nagios/plugins/onlyoffice-stats", "disabled": false, "fields": [ - { - "datafield_id": 2755, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2756, "is_required": "n", @@ -69722,6 +69736,11 @@ "datafield_id": 2761, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2762, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -69776,11 +69795,6 @@ "command": "/usr/lib64/nagios/plugins/openjdk-redhat-version", "disabled": false, "fields": [ - { - "datafield_id": 2762, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2763, "is_required": "n", @@ -69835,6 +69849,11 @@ "datafield_id": 2773, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2774, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -69917,11 +69936,6 @@ "command": "/usr/lib64/nagios/plugins/openstack-cinder-list", "disabled": false, "fields": [ - { - "datafield_id": 2774, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2775, "is_required": "n", @@ -70011,6 +70025,11 @@ "datafield_id": 2792, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2793, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -70101,11 +70120,6 @@ "command": "/usr/lib64/nagios/plugins/openstack-nova-list", "disabled": false, "fields": [ - { - "datafield_id": 2793, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2794, "is_required": "n", @@ -70205,6 +70219,11 @@ "datafield_id": 2813, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2814, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -70274,11 +70293,6 @@ "command": "/usr/lib64/nagios/plugins/openstack-quota", "disabled": false, "fields": [ - { - "datafield_id": 2814, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2815, "is_required": "n", @@ -70353,6 +70367,11 @@ "datafield_id": 2829, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2830, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -70424,11 +70443,6 @@ "command": "/usr/lib64/nagios/plugins/openstack-swift-stat", "disabled": false, "fields": [ - { - "datafield_id": 2830, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2831, "is_required": "n", @@ -70508,6 +70522,11 @@ "datafield_id": 2846, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2847, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -70541,11 +70560,6 @@ "command": "/usr/bin/sudo /usr/lib64/nagios/plugins/openvpn-client-list", "disabled": false, "fields": [ - { - "datafield_id": 2847, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2848, "is_required": "n", @@ -70565,6 +70579,11 @@ "datafield_id": 2851, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2852, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -70619,11 +70638,6 @@ "command": "/usr/lib64/nagios/plugins/openvpn-version", "disabled": false, "fields": [ - { - "datafield_id": 2852, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2853, "is_required": "n", @@ -70678,6 +70692,11 @@ "datafield_id": 2863, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2864, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -70710,22 +70729,22 @@ "disabled": false, "fields": [ { - "datafield_id": 2864, + "datafield_id": 2865, "is_required": "n", "var_filter": null }, { - "datafield_id": 2865, + "datafield_id": 2866, "is_required": "n", "var_filter": null }, { - "datafield_id": 2866, + "datafield_id": 2867, "is_required": "n", "var_filter": null }, { - "datafield_id": 2867, + "datafield_id": 2868, "is_required": "n", "var_filter": null } @@ -70777,22 +70796,22 @@ "disabled": false, "fields": [ { - "datafield_id": 2868, + "datafield_id": 2869, "is_required": "n", "var_filter": null }, { - "datafield_id": 2869, + "datafield_id": 2870, "is_required": "n", "var_filter": null }, { - "datafield_id": 2870, + "datafield_id": 2871, "is_required": "n", "var_filter": null }, { - "datafield_id": 2871, + "datafield_id": 2872, "is_required": "n", "var_filter": null } @@ -70897,11 +70916,6 @@ "command": "/usr/bin/sudo /usr/lib64/nagios/plugins/php-fpm-logfile", "disabled": false, "fields": [ - { - "datafield_id": 2872, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2873, "is_required": "n", @@ -71031,6 +71045,11 @@ "datafield_id": 2898, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2899, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -71076,11 +71095,6 @@ "command": "/usr/lib64/nagios/plugins/php-fpm-ping", "disabled": false, "fields": [ - { - "datafield_id": 2899, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2900, "is_required": "n", @@ -71120,6 +71134,11 @@ "datafield_id": 2907, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2908, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -71178,11 +71197,6 @@ "command": "/usr/lib64/nagios/plugins/php-fpm-status", "disabled": false, "fields": [ - { - "datafield_id": 2908, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2909, "is_required": "n", @@ -71242,6 +71256,11 @@ "datafield_id": 2920, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2921, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -71308,11 +71327,6 @@ "command": "/usr/bin/sudo /usr/lib64/nagios/plugins/php-status", "disabled": false, "fields": [ - { - "datafield_id": 2921, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2922, "is_required": "n", @@ -71382,6 +71396,11 @@ "datafield_id": 2935, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2936, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -71436,11 +71455,6 @@ "command": "/usr/lib64/nagios/plugins/php-version", "disabled": false, "fields": [ - { - "datafield_id": 2936, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2937, "is_required": "n", @@ -71495,6 +71509,11 @@ "datafield_id": 2947, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2948, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -71564,11 +71583,6 @@ "command": "/usr/lib64/nagios/plugins/ping", "disabled": false, "fields": [ - { - "datafield_id": 2948, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2949, "is_required": "n", @@ -71648,6 +71662,11 @@ "datafield_id": 2964, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2965, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -71714,11 +71733,6 @@ "command": "/usr/lib64/nagios/plugins/pip-updates", "disabled": false, "fields": [ - { - "datafield_id": 2965, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2966, "is_required": "n", @@ -71788,6 +71802,11 @@ "datafield_id": 2979, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2980, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -71847,11 +71866,6 @@ "command": "/usr/bin/sudo /usr/lib64/nagios/plugins/podman-container", "disabled": false, "fields": [ - { - "datafield_id": 2980, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2981, "is_required": "n", @@ -71911,6 +71925,11 @@ "datafield_id": 2992, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 2993, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -71961,11 +71980,6 @@ "command": "/usr/bin/sudo /usr/lib64/nagios/plugins/podman-image", "disabled": false, "fields": [ - { - "datafield_id": 2993, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 2994, "is_required": "n", @@ -72010,6 +72024,11 @@ "datafield_id": 3002, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3003, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -72044,11 +72063,6 @@ "command": "/usr/bin/sudo /usr/lib64/nagios/plugins/podman-info", "disabled": false, "fields": [ - { - "datafield_id": 3003, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3004, "is_required": "n", @@ -72068,6 +72082,11 @@ "datafield_id": 3007, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3008, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -72127,11 +72146,6 @@ "command": "/usr/bin/sudo /usr/lib64/nagios/plugins/podman-stats", "disabled": false, "fields": [ - { - "datafield_id": 3008, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3009, "is_required": "n", @@ -72191,6 +72205,11 @@ "datafield_id": 3020, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3021, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -72317,11 +72336,6 @@ "command": "/usr/bin/sudo /usr/lib64/nagios/plugins/postfix-logfile", "disabled": false, "fields": [ - { - "datafield_id": 3021, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3022, "is_required": "n", @@ -72491,6 +72505,11 @@ "datafield_id": 3055, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3056, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -72545,11 +72564,6 @@ "command": "/usr/lib64/nagios/plugins/postfix-version", "disabled": false, "fields": [ - { - "datafield_id": 3056, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3057, "is_required": "n", @@ -72604,6 +72618,11 @@ "datafield_id": 3067, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3068, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -72661,11 +72680,6 @@ "command": "/usr/lib64/nagios/plugins/postgresql-version", "disabled": false, "fields": [ - { - "datafield_id": 3068, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3069, "is_required": "n", @@ -72725,6 +72739,11 @@ "datafield_id": 3080, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3081, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -72800,11 +72819,6 @@ "command": "/usr/lib64/nagios/plugins/procs", "disabled": false, "fields": [ - { - "datafield_id": 3081, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3082, "is_required": "n", @@ -72894,6 +72908,11 @@ "datafield_id": 3099, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3100, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -72969,11 +72988,6 @@ "command": "C:\\Program Files\\icinga2\\sbin\\linuxfabrik\\procs.exe", "disabled": false, "fields": [ - { - "datafield_id": 3100, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3101, "is_required": "n", @@ -73063,6 +73077,11 @@ "datafield_id": 3118, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3119, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -73102,11 +73121,6 @@ "command": "/usr/lib64/nagios/plugins/psi-cpu", "disabled": false, "fields": [ - { - "datafield_id": 3119, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3120, "is_required": "n", @@ -73136,6 +73150,11 @@ "datafield_id": 3125, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3126, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -73175,11 +73194,6 @@ "command": "/usr/lib64/nagios/plugins/psi-io", "disabled": false, "fields": [ - { - "datafield_id": 3126, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3127, "is_required": "n", @@ -73209,6 +73223,11 @@ "datafield_id": 3132, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3133, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -73248,11 +73267,6 @@ "command": "/usr/lib64/nagios/plugins/psi-irq", "disabled": false, "fields": [ - { - "datafield_id": 3133, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3134, "is_required": "n", @@ -73282,6 +73296,11 @@ "datafield_id": 3139, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3140, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -73321,11 +73340,6 @@ "command": "/usr/lib64/nagios/plugins/psi-memory", "disabled": false, "fields": [ - { - "datafield_id": 3140, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3141, "is_required": "n", @@ -73355,6 +73369,11 @@ "datafield_id": 3146, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3147, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -73409,11 +73428,6 @@ "command": "/usr/lib64/nagios/plugins/python-version", "disabled": false, "fields": [ - { - "datafield_id": 3147, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3148, "is_required": "n", @@ -73468,6 +73482,11 @@ "datafield_id": 3158, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3159, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -73522,11 +73541,6 @@ "command": "/usr/lib64/nagios/plugins/qts-cpu-usage", "disabled": false, "fields": [ - { - "datafield_id": 3159, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3160, "is_required": "n", @@ -73554,12 +73568,12 @@ }, { "datafield_id": 3165, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3166, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -73569,18 +73583,23 @@ }, { "datafield_id": 3168, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3169, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 3170, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3171, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -73626,11 +73645,6 @@ "command": "/usr/lib64/nagios/plugins/qts-disk-smart", "disabled": false, "fields": [ - { - "datafield_id": 3171, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3172, "is_required": "n", @@ -73648,12 +73662,12 @@ }, { "datafield_id": 3175, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3176, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -73663,11 +73677,16 @@ }, { "datafield_id": 3178, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3179, + "is_required": "y", + "var_filter": null + }, + { + "datafield_id": 3180, "is_required": "n", "var_filter": null } @@ -73721,11 +73740,6 @@ "command": "/usr/lib64/nagios/plugins/qts-memory-usage", "disabled": false, "fields": [ - { - "datafield_id": 3180, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3181, "is_required": "n", @@ -73748,12 +73762,12 @@ }, { "datafield_id": 3185, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3186, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -73763,18 +73777,23 @@ }, { "datafield_id": 3188, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3189, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 3190, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3191, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -73820,11 +73839,6 @@ "command": "/usr/lib64/nagios/plugins/qts-temperatures", "disabled": false, "fields": [ - { - "datafield_id": 3191, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3192, "is_required": "n", @@ -73842,12 +73856,12 @@ }, { "datafield_id": 3195, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3196, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -73857,11 +73871,16 @@ }, { "datafield_id": 3198, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3199, + "is_required": "y", + "var_filter": null + }, + { + "datafield_id": 3200, "is_required": "n", "var_filter": null } @@ -73909,11 +73928,6 @@ "command": "/usr/lib64/nagios/plugins/qts-uptime", "disabled": false, "fields": [ - { - "datafield_id": 3200, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3201, "is_required": "n", @@ -73931,12 +73945,12 @@ }, { "datafield_id": 3204, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3205, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -73946,11 +73960,16 @@ }, { "datafield_id": 3207, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3208, + "is_required": "y", + "var_filter": null + }, + { + "datafield_id": 3209, "is_required": "n", "var_filter": null } @@ -73995,11 +74014,6 @@ "command": "/usr/lib64/nagios/plugins/qts-version", "disabled": false, "fields": [ - { - "datafield_id": 3209, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3210, "is_required": "n", @@ -74012,12 +74026,12 @@ }, { "datafield_id": 3212, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3213, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -74027,11 +74041,16 @@ }, { "datafield_id": 3215, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3216, + "is_required": "y", + "var_filter": null + }, + { + "datafield_id": 3217, "is_required": "n", "var_filter": null } @@ -74105,11 +74124,6 @@ "command": "/usr/lib64/nagios/plugins/redfish-ethernetinterfaces", "disabled": false, "fields": [ - { - "datafield_id": 3217, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3218, "is_required": "n", @@ -74177,18 +74191,23 @@ }, { "datafield_id": 3231, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3232, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 3233, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3234, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -74260,11 +74279,6 @@ "command": "/usr/lib64/nagios/plugins/redfish-firmwareinventory", "disabled": false, "fields": [ - { - "datafield_id": 3234, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3235, "is_required": "n", @@ -74332,18 +74346,23 @@ }, { "datafield_id": 3248, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3249, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 3250, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3251, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -74415,11 +74434,6 @@ "command": "/usr/lib64/nagios/plugins/redfish-logservices", "disabled": false, "fields": [ - { - "datafield_id": 3251, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3252, "is_required": "n", @@ -74487,18 +74501,23 @@ }, { "datafield_id": 3265, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3266, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 3267, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3268, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -74567,11 +74586,6 @@ "command": "/usr/lib64/nagios/plugins/redfish-managers", "disabled": false, "fields": [ - { - "datafield_id": 3268, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3269, "is_required": "n", @@ -74634,18 +74648,23 @@ }, { "datafield_id": 3281, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3282, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 3283, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3284, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -74717,11 +74736,6 @@ "command": "/usr/lib64/nagios/plugins/redfish-memory", "disabled": false, "fields": [ - { - "datafield_id": 3284, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3285, "is_required": "n", @@ -74789,18 +74803,23 @@ }, { "datafield_id": 3298, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3299, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 3300, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3301, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -74872,11 +74891,6 @@ "command": "/usr/lib64/nagios/plugins/redfish-processors", "disabled": false, "fields": [ - { - "datafield_id": 3301, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3302, "is_required": "n", @@ -74944,18 +74958,23 @@ }, { "datafield_id": 3315, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3316, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 3317, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3318, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -75027,11 +75046,6 @@ "command": "/usr/lib64/nagios/plugins/redfish-sensors", "disabled": false, "fields": [ - { - "datafield_id": 3318, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3319, "is_required": "n", @@ -75099,18 +75113,23 @@ }, { "datafield_id": 3332, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3333, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 3334, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3335, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -75182,11 +75201,6 @@ "command": "/usr/lib64/nagios/plugins/redfish-storage", "disabled": false, "fields": [ - { - "datafield_id": 3335, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3336, "is_required": "n", @@ -75254,18 +75268,23 @@ }, { "datafield_id": 3349, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3350, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 3351, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3352, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -75326,11 +75345,6 @@ "command": "/usr/lib64/nagios/plugins/redfish-systems", "disabled": false, "fields": [ - { - "datafield_id": 3352, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3353, "is_required": "n", @@ -75383,18 +75397,23 @@ }, { "datafield_id": 3363, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3364, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 3365, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3366, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -75467,11 +75486,6 @@ "command": "/usr/lib64/nagios/plugins/redis-status", "disabled": false, "fields": [ - { - "datafield_id": 3366, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3367, "is_required": "n", @@ -75556,6 +75570,11 @@ "datafield_id": 3383, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3384, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -75610,11 +75629,6 @@ "command": "/usr/lib64/nagios/plugins/redis-version", "disabled": false, "fields": [ - { - "datafield_id": 3384, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3385, "is_required": "n", @@ -75669,6 +75683,11 @@ "datafield_id": 3395, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3396, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -75702,11 +75721,6 @@ "command": "/usr/bin/sudo /usr/lib64/nagios/plugins/restic-check", "disabled": false, "fields": [ - { - "datafield_id": 3396, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3397, "is_required": "n", @@ -75726,6 +75740,11 @@ "datafield_id": 3400, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3401, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -75789,11 +75808,6 @@ "command": "/usr/bin/sudo /usr/lib64/nagios/plugins/restic-snapshots", "disabled": false, "fields": [ - { - "datafield_id": 3401, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3402, "is_required": "n", @@ -75858,6 +75872,11 @@ "datafield_id": 3414, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3415, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -75909,11 +75928,6 @@ "command": "/usr/bin/sudo /usr/lib64/nagios/plugins/restic-stats", "disabled": false, "fields": [ - { - "datafield_id": 3415, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3416, "is_required": "n", @@ -75958,6 +75972,11 @@ "datafield_id": 3424, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3425, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -76012,11 +76031,6 @@ "command": "/usr/lib64/nagios/plugins/rhel-version", "disabled": false, "fields": [ - { - "datafield_id": 3425, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3426, "is_required": "n", @@ -76071,6 +76085,11 @@ "datafield_id": 3436, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3437, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -76116,11 +76135,6 @@ "command": "/usr/lib64/nagios/plugins/rocketchat-stats", "disabled": false, "fields": [ - { - "datafield_id": 3437, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3438, "is_required": "n", @@ -76138,12 +76152,12 @@ }, { "datafield_id": 3441, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3442, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -76158,6 +76172,11 @@ }, { "datafield_id": 3445, + "is_required": "n", + "var_filter": null + }, + { + "datafield_id": 3446, "is_required": "y", "var_filter": null } @@ -76220,11 +76239,6 @@ "command": "/usr/lib64/nagios/plugins/rocketchat-version", "disabled": false, "fields": [ - { - "datafield_id": 3446, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3447, "is_required": "n", @@ -76262,12 +76276,12 @@ }, { "datafield_id": 3454, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3455, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -76287,6 +76301,11 @@ }, { "datafield_id": 3459, + "is_required": "n", + "var_filter": null + }, + { + "datafield_id": 3460, "is_required": "y", "var_filter": null } @@ -76317,17 +76336,17 @@ "disabled": false, "fields": [ { - "datafield_id": 3460, + "datafield_id": 3461, "is_required": "n", "var_filter": null }, { - "datafield_id": 3461, + "datafield_id": 3462, "is_required": "n", "var_filter": null }, { - "datafield_id": 3462, + "datafield_id": 3463, "is_required": "n", "var_filter": null } @@ -76358,17 +76377,17 @@ "disabled": false, "fields": [ { - "datafield_id": 3463, + "datafield_id": 3464, "is_required": "n", "var_filter": null }, { - "datafield_id": 3464, + "datafield_id": 3465, "is_required": "n", "var_filter": null }, { - "datafield_id": 3465, + "datafield_id": 3466, "is_required": "n", "var_filter": null } @@ -76416,11 +76435,6 @@ "command": "/usr/lib64/nagios/plugins/rpm-updates", "disabled": false, "fields": [ - { - "datafield_id": 3466, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3467, "is_required": "n", @@ -76460,6 +76474,11 @@ "datafield_id": 3474, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3475, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -76507,11 +76526,6 @@ "command": "/usr/lib64/nagios/plugins/rpm-versionlock", "disabled": false, "fields": [ - { - "datafield_id": 3475, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3476, "is_required": "n", @@ -76551,6 +76565,11 @@ "datafield_id": 3483, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3484, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -76596,11 +76615,6 @@ "command": "/usr/lib64/nagios/plugins/safenet-hsm-state", "disabled": false, "fields": [ - { - "datafield_id": 3484, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3485, "is_required": "n", @@ -76608,22 +76622,22 @@ }, { "datafield_id": 3486, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3487, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 3488, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3489, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -76640,6 +76654,11 @@ "datafield_id": 3492, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3493, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -76682,19 +76701,14 @@ "command": "/usr/lib64/nagios/plugins/sap-open-concur-com", "disabled": false, "fields": [ - { - "datafield_id": 3493, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3494, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3495, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -76721,6 +76735,11 @@ "datafield_id": 3500, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3501, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -76749,17 +76768,17 @@ "disabled": false, "fields": [ { - "datafield_id": 3501, + "datafield_id": 3502, "is_required": "n", "var_filter": null }, { - "datafield_id": 3502, + "datafield_id": 3503, "is_required": "n", "var_filter": null }, { - "datafield_id": 3503, + "datafield_id": 3504, "is_required": "n", "var_filter": null } @@ -76817,11 +76836,6 @@ "command": "C:\\Program Files\\icinga2\\sbin\\linuxfabrik\\scheduled-task.exe", "disabled": false, "fields": [ - { - "datafield_id": 3504, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3505, "is_required": "n", @@ -76839,11 +76853,16 @@ }, { "datafield_id": 3508, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3509, + "is_required": "y", + "var_filter": null + }, + { + "datafield_id": 3510, "is_required": "n", "var_filter": null } @@ -76871,12 +76890,12 @@ "disabled": false, "fields": [ { - "datafield_id": 3510, + "datafield_id": 3511, "is_required": "n", "var_filter": null }, { - "datafield_id": 3511, + "datafield_id": 3512, "is_required": "n", "var_filter": null } @@ -76910,22 +76929,22 @@ "disabled": false, "fields": [ { - "datafield_id": 3512, + "datafield_id": 3513, "is_required": "n", "var_filter": null }, { - "datafield_id": 3513, + "datafield_id": 3514, "is_required": "n", "var_filter": null }, { - "datafield_id": 3514, + "datafield_id": 3515, "is_required": "n", "var_filter": null }, { - "datafield_id": 3515, + "datafield_id": 3516, "is_required": "n", "var_filter": null } @@ -76959,22 +76978,22 @@ "disabled": false, "fields": [ { - "datafield_id": 3516, + "datafield_id": 3517, "is_required": "n", "var_filter": null }, { - "datafield_id": 3517, + "datafield_id": 3518, "is_required": "n", "var_filter": null }, { - "datafield_id": 3518, + "datafield_id": 3519, "is_required": "n", "var_filter": null }, { - "datafield_id": 3519, + "datafield_id": 3520, "is_required": "n", "var_filter": null } @@ -77009,22 +77028,22 @@ "disabled": false, "fields": [ { - "datafield_id": 3520, + "datafield_id": 3521, "is_required": "n", "var_filter": null }, { - "datafield_id": 3521, + "datafield_id": 3522, "is_required": "n", "var_filter": null }, { - "datafield_id": 3522, + "datafield_id": 3523, "is_required": "n", "var_filter": null }, { - "datafield_id": 3523, + "datafield_id": 3524, "is_required": "n", "var_filter": null } @@ -77073,11 +77092,6 @@ "command": "C:\\Program Files\\icinga2\\sbin\\linuxfabrik\\service.exe", "disabled": false, "fields": [ - { - "datafield_id": 3524, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3525, "is_required": "n", @@ -77095,12 +77109,12 @@ }, { "datafield_id": 3528, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3529, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -77112,6 +77126,11 @@ "datafield_id": 3531, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3532, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -77196,11 +77215,6 @@ "command": "/usr/lib64/nagios/plugins/snmp", "disabled": false, "fields": [ - { - "datafield_id": 3532, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3533, "is_required": "n", @@ -77223,12 +77237,12 @@ }, { "datafield_id": 3537, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3538, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -77305,6 +77319,11 @@ "datafield_id": 3553, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3554, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -77355,11 +77374,6 @@ "command": "/usr/lib64/nagios/plugins/spring-boot-actuator-health", "disabled": false, "fields": [ - { - "datafield_id": 3554, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3555, "is_required": "n", @@ -77404,6 +77418,11 @@ "datafield_id": 3563, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3564, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -77512,11 +77531,6 @@ "command": "/usr/bin/sudo /usr/lib64/nagios/plugins/sshd-logfile", "disabled": false, "fields": [ - { - "datafield_id": 3564, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3565, "is_required": "n", @@ -77656,6 +77670,11 @@ "datafield_id": 3592, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3593, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -77695,11 +77714,6 @@ "command": "/usr/lib64/nagios/plugins/starface-account-stats", "disabled": false, "fields": [ - { - "datafield_id": 3593, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3594, "is_required": "n", @@ -77729,6 +77743,11 @@ "datafield_id": 3599, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3600, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -77774,11 +77793,6 @@ "command": "/usr/lib64/nagios/plugins/starface-backup-status", "disabled": false, "fields": [ - { - "datafield_id": 3600, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3601, "is_required": "n", @@ -77818,6 +77832,11 @@ "datafield_id": 3608, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3609, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -77863,11 +77882,6 @@ "command": "/usr/lib64/nagios/plugins/starface-channel-status", "disabled": false, "fields": [ - { - "datafield_id": 3609, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3610, "is_required": "n", @@ -77907,6 +77921,11 @@ "datafield_id": 3617, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3618, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -77946,11 +77965,6 @@ "command": "/usr/lib64/nagios/plugins/starface-database-stats", "disabled": false, "fields": [ - { - "datafield_id": 3618, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3619, "is_required": "n", @@ -77980,6 +77994,11 @@ "datafield_id": 3624, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3625, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -78025,11 +78044,6 @@ "command": "/usr/lib64/nagios/plugins/starface-java-memory-usage", "disabled": false, "fields": [ - { - "datafield_id": 3625, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3626, "is_required": "n", @@ -78069,6 +78083,11 @@ "datafield_id": 3633, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3634, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -78108,11 +78127,6 @@ "command": "/usr/lib64/nagios/plugins/starface-peer-stats", "disabled": false, "fields": [ - { - "datafield_id": 3634, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3635, "is_required": "n", @@ -78142,6 +78156,11 @@ "datafield_id": 3640, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3641, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -78187,11 +78206,6 @@ "command": "/usr/lib64/nagios/plugins/starface-status", "disabled": false, "fields": [ - { - "datafield_id": 3641, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3642, "is_required": "n", @@ -78231,6 +78245,11 @@ "datafield_id": 3649, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3650, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -78273,11 +78292,6 @@ "command": "/usr/lib64/nagios/plugins/statusiq", "disabled": false, "fields": [ - { - "datafield_id": 3650, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3651, "is_required": "n", @@ -78312,6 +78326,11 @@ "datafield_id": 3657, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3658, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -78351,11 +78370,6 @@ "command": "/usr/lib64/nagios/plugins/statuspal", "disabled": false, "fields": [ - { - "datafield_id": 3658, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3659, "is_required": "n", @@ -78385,6 +78399,11 @@ "datafield_id": 3664, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3665, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -78426,11 +78445,6 @@ "command": "/usr/bin/sudo /usr/lib64/nagios/plugins/strongswan-connections", "disabled": false, "fields": [ - { - "datafield_id": 3665, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3666, "is_required": "n", @@ -78460,6 +78474,11 @@ "datafield_id": 3671, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3672, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -78496,11 +78515,6 @@ "command": "/usr/lib64/nagios/plugins/swap-usage", "disabled": false, "fields": [ - { - "datafield_id": 3672, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3673, "is_required": "n", @@ -78525,6 +78539,11 @@ "datafield_id": 3677, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3678, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -78561,11 +78580,6 @@ "command": "C:\\Program Files\\icinga2\\sbin\\linuxfabrik\\swap-usage.exe", "disabled": false, "fields": [ - { - "datafield_id": 3678, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3679, "is_required": "n", @@ -78590,6 +78604,11 @@ "datafield_id": 3683, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3684, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -78615,12 +78634,12 @@ "disabled": false, "fields": [ { - "datafield_id": 3684, + "datafield_id": 3685, "is_required": "n", "var_filter": null }, { - "datafield_id": 3685, + "datafield_id": 3686, "is_required": "n", "var_filter": null } @@ -78670,11 +78689,6 @@ "command": "/usr/bin/sudo /usr/lib64/nagios/plugins/systemd-unit", "disabled": false, "fields": [ - { - "datafield_id": 3686, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3687, "is_required": "n", @@ -78702,18 +78716,23 @@ }, { "datafield_id": 3692, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3693, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 3694, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3695, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -78743,17 +78762,17 @@ "disabled": false, "fields": [ { - "datafield_id": 3695, + "datafield_id": 3696, "is_required": "n", "var_filter": null }, { - "datafield_id": 3696, + "datafield_id": 3697, "is_required": "n", "var_filter": null }, { - "datafield_id": 3697, + "datafield_id": 3698, "is_required": "n", "var_filter": null } @@ -78784,17 +78803,17 @@ "disabled": false, "fields": [ { - "datafield_id": 3698, + "datafield_id": 3699, "is_required": "n", "var_filter": null }, { - "datafield_id": 3699, + "datafield_id": 3700, "is_required": "n", "var_filter": null }, { - "datafield_id": 3700, + "datafield_id": 3701, "is_required": "n", "var_filter": null } @@ -78830,11 +78849,6 @@ "command": "C:\\Program Files\\icinga2\\sbin\\linuxfabrik\\updates.exe", "disabled": false, "fields": [ - { - "datafield_id": 3701, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3702, "is_required": "n", @@ -78854,6 +78868,11 @@ "datafield_id": 3705, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3706, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -78923,11 +78942,6 @@ "command": "/usr/lib64/nagios/plugins/ups-nut", "disabled": false, "fields": [ - { - "datafield_id": 3706, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3707, "is_required": "n", @@ -79007,6 +79021,11 @@ "datafield_id": 3722, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3723, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -79038,22 +79057,22 @@ "disabled": false, "fields": [ { - "datafield_id": 3723, + "datafield_id": 3724, "is_required": "n", "var_filter": null }, { - "datafield_id": 3724, + "datafield_id": 3725, "is_required": "n", "var_filter": null }, { - "datafield_id": 3725, + "datafield_id": 3726, "is_required": "n", "var_filter": null }, { - "datafield_id": 3726, + "datafield_id": 3727, "is_required": "n", "var_filter": null } @@ -79087,22 +79106,22 @@ "disabled": false, "fields": [ { - "datafield_id": 3727, + "datafield_id": 3728, "is_required": "n", "var_filter": null }, { - "datafield_id": 3728, + "datafield_id": 3729, "is_required": "n", "var_filter": null }, { - "datafield_id": 3729, + "datafield_id": 3730, "is_required": "n", "var_filter": null }, { - "datafield_id": 3730, + "datafield_id": 3731, "is_required": "n", "var_filter": null } @@ -79144,11 +79163,6 @@ "command": "/usr/lib64/nagios/plugins/uptimerobot", "disabled": false, "fields": [ - { - "datafield_id": 3731, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3732, "is_required": "n", @@ -79178,6 +79192,11 @@ "datafield_id": 3737, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3738, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -79209,22 +79228,22 @@ "disabled": false, "fields": [ { - "datafield_id": 3738, + "datafield_id": 3739, "is_required": "n", "var_filter": null }, { - "datafield_id": 3739, + "datafield_id": 3740, "is_required": "n", "var_filter": null }, { - "datafield_id": 3740, + "datafield_id": 3741, "is_required": "n", "var_filter": null }, { - "datafield_id": 3741, + "datafield_id": 3742, "is_required": "n", "var_filter": null } @@ -79258,22 +79277,22 @@ "disabled": false, "fields": [ { - "datafield_id": 3742, + "datafield_id": 3743, "is_required": "n", "var_filter": null }, { - "datafield_id": 3743, + "datafield_id": 3744, "is_required": "n", "var_filter": null }, { - "datafield_id": 3744, + "datafield_id": 3745, "is_required": "n", "var_filter": null }, { - "datafield_id": 3745, + "datafield_id": 3746, "is_required": "n", "var_filter": null } @@ -79348,11 +79367,6 @@ "command": "/usr/lib64/nagios/plugins/valkey-status", "disabled": false, "fields": [ - { - "datafield_id": 3746, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3747, "is_required": "n", @@ -79437,6 +79451,11 @@ "datafield_id": 3763, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3764, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -79491,11 +79510,6 @@ "command": "/usr/lib64/nagios/plugins/valkey-version", "disabled": false, "fields": [ - { - "datafield_id": 3764, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3765, "is_required": "n", @@ -79550,6 +79564,11 @@ "datafield_id": 3775, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3776, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -79622,11 +79641,6 @@ "command": "/usr/lib64/nagios/plugins/veeam-status", "disabled": false, "fields": [ - { - "datafield_id": 3776, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3777, "is_required": "n", @@ -79674,12 +79688,12 @@ }, { "datafield_id": 3786, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3787, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -79694,12 +79708,12 @@ }, { "datafield_id": 3790, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3791, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -79711,6 +79725,11 @@ "datafield_id": 3793, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3794, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -79756,11 +79775,6 @@ "command": "/usr/lib64/nagios/plugins/virustotal-scan-url", "disabled": false, "fields": [ - { - "datafield_id": 3794, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3795, "is_required": "n", @@ -79793,13 +79807,18 @@ }, { "datafield_id": 3801, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3802, "is_required": "y", "var_filter": null + }, + { + "datafield_id": 3803, + "is_required": "y", + "var_filter": null } ], "imports": [], @@ -79851,19 +79870,14 @@ "command": "/usr/lib64/nagios/plugins/whmcs-status", "disabled": false, "fields": [ - { - "datafield_id": 3803, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3804, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3805, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -79888,21 +79902,26 @@ }, { "datafield_id": 3810, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3811, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 3812, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3813, + "is_required": "y", + "var_filter": null + }, + { + "datafield_id": 3814, "is_required": "n", "var_filter": null } @@ -79963,11 +79982,6 @@ "command": "/usr/lib64/nagios/plugins/wildfly-deployment-status", "disabled": false, "fields": [ - { - "datafield_id": 3814, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3815, "is_required": "n", @@ -80005,12 +80019,12 @@ }, { "datafield_id": 3822, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3823, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -80025,6 +80039,11 @@ }, { "datafield_id": 3826, + "is_required": "n", + "var_filter": null + }, + { + "datafield_id": 3827, "is_required": "y", "var_filter": null } @@ -80081,11 +80100,6 @@ "command": "/usr/lib64/nagios/plugins/wildfly-gc-status", "disabled": false, "fields": [ - { - "datafield_id": 3827, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3828, "is_required": "n", @@ -80118,12 +80132,12 @@ }, { "datafield_id": 3834, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3835, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -80138,6 +80152,11 @@ }, { "datafield_id": 3838, + "is_required": "n", + "var_filter": null + }, + { + "datafield_id": 3839, "is_required": "y", "var_filter": null } @@ -80194,11 +80213,6 @@ "command": "/usr/lib64/nagios/plugins/wildfly-memory-pool-usage", "disabled": false, "fields": [ - { - "datafield_id": 3839, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3840, "is_required": "n", @@ -80231,12 +80245,12 @@ }, { "datafield_id": 3846, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3847, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -80251,6 +80265,11 @@ }, { "datafield_id": 3850, + "is_required": "n", + "var_filter": null + }, + { + "datafield_id": 3851, "is_required": "y", "var_filter": null } @@ -80313,11 +80332,6 @@ "command": "/usr/lib64/nagios/plugins/wildfly-memory-usage", "disabled": false, "fields": [ - { - "datafield_id": 3851, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3852, "is_required": "n", @@ -80355,12 +80369,12 @@ }, { "datafield_id": 3859, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3860, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -80375,11 +80389,16 @@ }, { "datafield_id": 3863, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3864, + "is_required": "y", + "var_filter": null + }, + { + "datafield_id": 3865, "is_required": "n", "var_filter": null } @@ -80449,11 +80468,6 @@ "command": "/usr/lib64/nagios/plugins/wildfly-non-xa-datasource-stats", "disabled": false, "fields": [ - { - "datafield_id": 3865, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3866, "is_required": "n", @@ -80501,12 +80515,12 @@ }, { "datafield_id": 3875, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3876, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -80521,11 +80535,16 @@ }, { "datafield_id": 3879, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3880, + "is_required": "y", + "var_filter": null + }, + { + "datafield_id": 3881, "is_required": "n", "var_filter": null } @@ -80582,11 +80601,6 @@ "command": "/usr/lib64/nagios/plugins/wildfly-server-status", "disabled": false, "fields": [ - { - "datafield_id": 3881, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3882, "is_required": "n", @@ -80619,12 +80633,12 @@ }, { "datafield_id": 3888, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3889, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -80639,6 +80653,11 @@ }, { "datafield_id": 3892, + "is_required": "n", + "var_filter": null + }, + { + "datafield_id": 3893, "is_required": "y", "var_filter": null } @@ -80701,11 +80720,6 @@ "command": "/usr/lib64/nagios/plugins/wildfly-thread-usage", "disabled": false, "fields": [ - { - "datafield_id": 3893, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3894, "is_required": "n", @@ -80743,12 +80757,12 @@ }, { "datafield_id": 3901, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3902, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -80763,11 +80777,16 @@ }, { "datafield_id": 3905, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3906, + "is_required": "y", + "var_filter": null + }, + { + "datafield_id": 3907, "is_required": "n", "var_filter": null } @@ -80830,11 +80849,6 @@ "command": "/usr/lib64/nagios/plugins/wildfly-uptime", "disabled": false, "fields": [ - { - "datafield_id": 3907, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3908, "is_required": "n", @@ -80872,12 +80886,12 @@ }, { "datafield_id": 3915, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3916, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -80892,11 +80906,16 @@ }, { "datafield_id": 3919, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3920, + "is_required": "y", + "var_filter": null + }, + { + "datafield_id": 3921, "is_required": "n", "var_filter": null } @@ -80956,11 +80975,6 @@ "command": "/usr/lib64/nagios/plugins/wildfly-version", "disabled": false, "fields": [ - { - "datafield_id": 3921, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3922, "is_required": "n", @@ -80998,12 +81012,12 @@ }, { "datafield_id": 3929, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3930, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -81020,6 +81034,11 @@ "datafield_id": 3933, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3934, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -81087,11 +81106,6 @@ "command": "/usr/lib64/nagios/plugins/wildfly-xa-datasource-stats", "disabled": false, "fields": [ - { - "datafield_id": 3934, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3935, "is_required": "n", @@ -81139,12 +81153,12 @@ }, { "datafield_id": 3944, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3945, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -81159,11 +81173,16 @@ }, { "datafield_id": 3948, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 3949, + "is_required": "y", + "var_filter": null + }, + { + "datafield_id": 3950, "is_required": "n", "var_filter": null } @@ -81211,11 +81230,6 @@ "command": "C:\\Program Files\\icinga2\\sbin\\linuxfabrik\\windows-version.exe", "disabled": false, "fields": [ - { - "datafield_id": 3950, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3951, "is_required": "n", @@ -81255,6 +81269,11 @@ "datafield_id": 3958, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3959, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -81323,11 +81342,6 @@ "command": "/usr/lib64/nagios/plugins/wordpress-checksums", "disabled": false, "fields": [ - { - "datafield_id": 3959, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3960, "is_required": "n", @@ -81402,6 +81416,11 @@ "datafield_id": 3974, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 3975, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -81516,11 +81535,6 @@ "command": "/usr/lib64/nagios/plugins/wordpress-security-scan", "disabled": false, "fields": [ - { - "datafield_id": 3975, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 3976, "is_required": "n", @@ -81670,6 +81684,11 @@ "datafield_id": 4005, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 4006, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -81724,11 +81743,6 @@ "command": "/usr/lib64/nagios/plugins/wordpress-version", "disabled": false, "fields": [ - { - "datafield_id": 4006, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 4007, "is_required": "n", @@ -81783,6 +81797,11 @@ "datafield_id": 4017, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 4018, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -81822,11 +81841,6 @@ "command": "/usr/lib64/nagios/plugins/xca-cert", "disabled": false, "fields": [ - { - "datafield_id": 4018, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 4019, "is_required": "n", @@ -81856,6 +81870,11 @@ "datafield_id": 4024, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 4025, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -81908,11 +81927,6 @@ "command": "/usr/lib64/nagios/plugins/xml", "disabled": false, "fields": [ - { - "datafield_id": 4025, - "is_required": "n", - "var_filter": null - }, { "datafield_id": 4026, "is_required": "n", @@ -81950,16 +81964,21 @@ }, { "datafield_id": 4033, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4034, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4035, + "is_required": "n", + "var_filter": null + }, + { + "datafield_id": 4036, "is_required": "y", "var_filter": null } @@ -82046,34 +82065,29 @@ "command": "/usr/lib64/nagios/plugins/notify-host-mail", "disabled": false, "fields": [ - { - "datafield_id": 4036, - "is_required": "y", - "var_filter": null - }, { "datafield_id": 4037, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4038, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4039, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4040, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4041, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -82103,7 +82117,7 @@ }, { "datafield_id": 4047, - "is_required": "y", + "is_required": "n", "var_filter": null }, { @@ -82113,7 +82127,7 @@ }, { "datafield_id": 4049, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -82155,6 +82169,11 @@ "datafield_id": 4057, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 4058, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -82204,11 +82223,6 @@ "command": "/usr/lib64/nagios/plugins/notify-host-rocketchat", "disabled": false, "fields": [ - { - "datafield_id": 4058, - "is_required": "y", - "var_filter": null - }, { "datafield_id": 4059, "is_required": "y", @@ -82216,17 +82230,17 @@ }, { "datafield_id": 4060, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4061, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4062, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -82251,6 +82265,11 @@ }, { "datafield_id": 4067, + "is_required": "n", + "var_filter": null + }, + { + "datafield_id": 4068, "is_required": "y", "var_filter": null } @@ -82301,11 +82320,6 @@ "command": "/usr/lib64/nagios/plugins/notify-host-zoom", "disabled": false, "fields": [ - { - "datafield_id": 4068, - "is_required": "y", - "var_filter": null - }, { "datafield_id": 4069, "is_required": "y", @@ -82313,17 +82327,17 @@ }, { "datafield_id": 4070, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4071, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4072, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -82343,13 +82357,18 @@ }, { "datafield_id": 4076, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4077, "is_required": "y", "var_filter": null + }, + { + "datafield_id": 4078, + "is_required": "y", + "var_filter": null } ], "imports": [], @@ -82440,24 +82459,19 @@ "command": "/usr/lib64/nagios/plugins/notify-service-mail", "disabled": false, "fields": [ - { - "datafield_id": 4078, - "is_required": "y", - "var_filter": null - }, { "datafield_id": 4079, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4080, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4081, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -82487,7 +82501,7 @@ }, { "datafield_id": 4087, - "is_required": "y", + "is_required": "n", "var_filter": null }, { @@ -82497,7 +82511,7 @@ }, { "datafield_id": 4089, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -82537,28 +82551,33 @@ }, { "datafield_id": 4097, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4098, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4099, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4100, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4101, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 4102, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -82611,11 +82630,6 @@ "command": "/usr/lib64/nagios/plugins/notify-service-rocketchat", "disabled": false, "fields": [ - { - "datafield_id": 4102, - "is_required": "y", - "var_filter": null - }, { "datafield_id": 4103, "is_required": "y", @@ -82623,7 +82637,7 @@ }, { "datafield_id": 4104, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -82648,21 +82662,26 @@ }, { "datafield_id": 4109, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4110, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4111, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4112, + "is_required": "y", + "var_filter": null + }, + { + "datafield_id": 4113, "is_required": "n", "var_filter": null } @@ -82719,11 +82738,6 @@ "command": "/usr/lib64/nagios/plugins/notify-service-zoom", "disabled": false, "fields": [ - { - "datafield_id": 4113, - "is_required": "y", - "var_filter": null - }, { "datafield_id": 4114, "is_required": "y", @@ -82731,7 +82745,7 @@ }, { "datafield_id": 4115, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -82751,33 +82765,38 @@ }, { "datafield_id": 4119, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4120, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4121, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4122, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4123, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4124, "is_required": "y", "var_filter": null + }, + { + "datafield_id": 4125, + "is_required": "y", + "var_filter": null } ], "imports": [], @@ -93965,34 +93984,29 @@ "command": "cmd-notification-notify-host-mail", "disabled": false, "fields": [ - { - "datafield_id": 4036, - "is_required": "y", - "var_filter": null - }, { "datafield_id": 4037, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4038, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4039, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4040, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4041, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -94022,7 +94036,7 @@ }, { "datafield_id": 4047, - "is_required": "y", + "is_required": "n", "var_filter": null }, { @@ -94032,7 +94046,7 @@ }, { "datafield_id": 4049, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -94074,6 +94088,11 @@ "datafield_id": 4057, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 4058, + "is_required": "n", + "var_filter": null } ], "host": null, @@ -94125,11 +94144,6 @@ "command": "cmd-notification-notify-host-rocketchat", "disabled": false, "fields": [ - { - "datafield_id": 4058, - "is_required": "y", - "var_filter": null - }, { "datafield_id": 4059, "is_required": "y", @@ -94137,17 +94151,17 @@ }, { "datafield_id": 4060, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4061, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4062, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -94172,6 +94186,11 @@ }, { "datafield_id": 4067, + "is_required": "n", + "var_filter": null + }, + { + "datafield_id": 4068, "is_required": "y", "var_filter": null } @@ -94216,11 +94235,6 @@ "command": "cmd-notification-notify-host-zoom", "disabled": false, "fields": [ - { - "datafield_id": 4068, - "is_required": "y", - "var_filter": null - }, { "datafield_id": 4069, "is_required": "y", @@ -94228,17 +94242,17 @@ }, { "datafield_id": 4070, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4071, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4072, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -94258,13 +94272,18 @@ }, { "datafield_id": 4076, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4077, "is_required": "y", "var_filter": null + }, + { + "datafield_id": 4078, + "is_required": "y", + "var_filter": null } ], "host": null, @@ -94306,24 +94325,19 @@ "command": "cmd-notification-notify-service-mail", "disabled": false, "fields": [ - { - "datafield_id": 4078, - "is_required": "y", - "var_filter": null - }, { "datafield_id": 4079, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4080, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4081, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -94353,7 +94367,7 @@ }, { "datafield_id": 4087, - "is_required": "y", + "is_required": "n", "var_filter": null }, { @@ -94363,7 +94377,7 @@ }, { "datafield_id": 4089, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -94403,28 +94417,33 @@ }, { "datafield_id": 4097, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4098, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4099, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4100, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4101, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 4102, + "is_required": "n", + "var_filter": null } ], "host": null, @@ -94480,11 +94499,6 @@ "command": "cmd-notification-notify-service-rocketchat", "disabled": false, "fields": [ - { - "datafield_id": 4102, - "is_required": "y", - "var_filter": null - }, { "datafield_id": 4103, "is_required": "y", @@ -94492,7 +94506,7 @@ }, { "datafield_id": 4104, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -94517,21 +94531,26 @@ }, { "datafield_id": 4109, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4110, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4111, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4112, + "is_required": "y", + "var_filter": null + }, + { + "datafield_id": 4113, "is_required": "n", "var_filter": null } @@ -94579,11 +94598,6 @@ "command": "cmd-notification-notify-service-zoom", "disabled": false, "fields": [ - { - "datafield_id": 4113, - "is_required": "y", - "var_filter": null - }, { "datafield_id": 4114, "is_required": "y", @@ -94591,7 +94605,7 @@ }, { "datafield_id": 4115, - "is_required": "n", + "is_required": "y", "var_filter": null }, { @@ -94611,33 +94625,38 @@ }, { "datafield_id": 4119, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4120, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4121, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4122, - "is_required": "n", + "is_required": "y", "var_filter": null }, { "datafield_id": 4123, - "is_required": "y", + "is_required": "n", "var_filter": null }, { "datafield_id": 4124, "is_required": "y", "var_filter": null + }, + { + "datafield_id": 4125, + "is_required": "y", + "var_filter": null } ], "host": null, @@ -160398,7 +160417,7 @@ "tpl-service-generic" ], "max_check_attempts": 5, - "notes": "Checks the InnoDB buffer pool and redo log sizing in MySQL/MariaDB. Measures how many of the pages InnoDB requested since the last check had to be read from disk because they were not in the buffer pool, and reports how far the checkpoint has run through the redo log, which is what tells a redo log that is too small for its workload from one that is merely small. The buffer pool does not have to hold the whole database: InnoDB keeps the pages that are read again and lets pages from a one-off scan age out first, so a pool far smaller than the data is fine as long as the working set fits. The InnoDB data and index size is therefore reported for reference only and never raises a state. Pages InnoDB prefetches by read-ahead are not counted as misses, and fewer than 10 misses per second are not worth an alert on any storage. On MariaDB 11.4.9 and newer the page requests of a transaction are only counted once it ends, so while long transactions run, the miss ratio of a single check can read too high, or cannot be computed at all when more pages were read than requested. On a server that publishes `Innodb_checkpoint_age` and `Innodb_checkpoint_max_age` those decide the state; on one that publishes neither, the average redo write rate since startup is compared against the redo log size instead, and a workload that writes through the whole log within an hour is reported. The redo log knob is `innodb_redo_log_capacity` on MySQL 8.0.30+ and `innodb_log_file_size` (times `innodb_log_files_in_group`, where that variable still exists) on MariaDB and older MySQL. Also flags `innodb_file_per_table = OFF` and architecture-related buffer-pool size limits. Alerts if the buffer pool miss ratio exceeds its threshold, or if the checkpoint runs closer to the end of the redo log than the thresholds allow. The redo log size mysqltuner would recommend for the host's RAM is reported as advice without raising a state, because it is a floor for the RAM tier rather than a measurement of this server. On freshly booted servers (less than one hour of uptime) the write-rate comparison is deferred, because the rate is an average since startup and not yet meaningful.", + "notes": "Checks the InnoDB buffer pool and redo log sizing in MySQL/MariaDB. Measures how many of the pages InnoDB requested since the last check had to be read from disk because they were not in the buffer pool, and reports how far the checkpoint has run through the redo log, which is what tells a redo log that is too small for its workload from one that is merely small. The buffer pool does not have to hold the whole database: InnoDB keeps the pages that are read again and lets pages from a one-off scan age out first, so a pool far smaller than the data is fine as long as the working set fits. The InnoDB data and index size is therefore reported for reference only and never raises a state. Pages InnoDB prefetches by read-ahead are not counted as misses, and fewer than 10 misses per second are not worth an alert on any storage. On MariaDB 11.4.9 and newer the page requests of a transaction are only counted once it ends, so while long transactions run, the miss ratio of a single check can read too high, or cannot be computed at all when more pages were read than requested. On a server that publishes `Innodb_checkpoint_age` and `Innodb_checkpoint_max_age` those decide the state; on one that publishes neither, the average redo write rate since startup is compared against the redo log size instead, and a workload that writes through the whole log within an hour is reported. The redo log knob is `innodb_redo_log_capacity` on MySQL 8.0.30+ and `innodb_log_file_size` (times `innodb_log_files_in_group`, where that variable still exists) on MariaDB and older MySQL. Also flags `innodb_file_per_table = OFF` and architecture-related buffer-pool size limits. Also reports how much of the buffer pool is in use; a pool that is not full yet is still filling up after a restart, and a low value is no reason to shrink it. Alerts if the buffer pool miss ratio exceeds its threshold, if sessions found no free page in the buffer pool more often than `--warning-waits` allows (default: at all), or if the checkpoint runs closer to the end of the redo log than the thresholds allow. The redo log size mysqltuner would recommend for the host's RAM is reported as advice without raising a state, because it is a floor for the RAM tier rather than a measurement of this server. On freshly booted servers (less than one hour of uptime) the write-rate comparison is deferred, because the rate is an average since startup and not yet meaningful.", "notes_url": "https://linuxfabrik.github.io/monitoring-plugins/check-plugins/mysql-innodb-buffer-pool-size/", "object_name": "tpl-service-mysql-innodb-buffer-pool-size", "object_type": "template", @@ -160416,7 +160435,8 @@ "mysql_innodb_buffer_pool_size_no_perfdata": false, "mysql_innodb_buffer_pool_size_timeout": 3, "mysql_innodb_buffer_pool_size_warning": "87.5", - "mysql_innodb_buffer_pool_size_warning_miss_ratio": "20" + "mysql_innodb_buffer_pool_size_warning_miss_ratio": "20", + "mysql_innodb_buffer_pool_size_warning_waits": "0" }, "volatile": null, "zone": null, diff --git a/check-plugins/mysql-innodb-buffer-pool-size/README.md b/check-plugins/mysql-innodb-buffer-pool-size/README.md index d0bf1345a..67e9a4891 100644 --- a/check-plugins/mysql-innodb-buffer-pool-size/README.md +++ b/check-plugins/mysql-innodb-buffer-pool-size/README.md @@ -3,7 +3,7 @@ ## Overview -Checks the InnoDB buffer pool and redo log sizing in MySQL/MariaDB. For the buffer pool it measures how many of the pages InnoDB requested since the last check had to be read from disk, which is what tells a buffer pool that is too small for its working set from one that is merely smaller than the database. For the redo log it reports how far the checkpoint has run into it, which is what tells a redo log that is too small for its workload from one that is merely small. The knob that sizes the redo log on this server is `innodb_redo_log_capacity` on MySQL 8.0.30+, `innodb_log_file_size` (times `innodb_log_files_in_group`, where that variable still exists) on MariaDB and older MySQL. +Checks the InnoDB buffer pool and redo log sizing in MySQL/MariaDB. For the buffer pool it measures how many of the pages InnoDB requested since the last check had to be read from disk, which is what tells a buffer pool that is too small for its working set from one that is merely smaller than the database. It also reports how much of the pool is in use and warns if sessions found no free page in it. For the redo log it reports how far the checkpoint has run into it, which is what tells a redo log that is too small for its workload from one that is merely small. The knob that sizes the redo log on this server is `innodb_redo_log_capacity` on MySQL 8.0.30+, `innodb_log_file_size` (times `innodb_log_files_in_group`, where that variable still exists) on MariaDB and older MySQL. **Important Notes:** @@ -12,6 +12,8 @@ Checks the InnoDB buffer pool and redo log sizing in MySQL/MariaDB. For the buff * **The buffer pool is judged by its misses, not by the size of the database.** InnoDB does not need the whole database in memory. A page read from disk enters the "old" end of the LRU list and only moves to the "new" end if it is accessed again after `innodb_old_blocks_time`, so a one-off scan or a rarely read archive table ages out without evicting the pages that are in use. A buffer pool far smaller than the data is fine as long as the working set fits. The InnoDB data and index size is therefore reported for reference only * Pages InnoDB prefetches by read-ahead (`Innodb_buffer_pool_read_ahead`, `Innodb_buffer_pool_read_ahead_rnd`) are not counted as misses. Fewer than 10 misses per second never raise a state, because a handful of reads on a lightly used server would otherwise produce a high ratio that no storage notices * A full table scan through a buffer pool smaller than the table still misses about 10% of its pages, and more RAM does not help a scan until the whole table fits. This is why `--warning-miss-ratio` defaults to 20 and not to the 10 that mysqltuner uses for its lifetime read efficiency +* How much of the pool is in use says nothing about whether it is too large or too small, see "How to read the buffer pool numbers" below. It is reported for orientation and never raises a state +* Waits for a free page warn on any movement of the counter. What a count means depends on the server, see below; where bulk loads are allowed to run into waits, raise `--warning-waits` * The miss ratio covers the interval since the previous check, so the first run after installation and the first run after a server restart only record a baseline * MariaDB 11.4.9 and newer only count the page requests of a transaction once it ends, while its disk reads count right away. While long transactions are running, the miss ratio of a single check can read too high, or cannot be computed at all when more pages were read from disk than requested. The plugin then reports the interval as not measurable instead of alerting * If the InnoDB engine is not available or is disabled, the plugin reports OK with an info message instead of UNKNOWN @@ -26,13 +28,34 @@ Checks the InnoDB buffer pool and redo log sizing in MySQL/MariaDB. For the buff **Data Collection:** -* Queries `SHOW GLOBAL VARIABLES` for `innodb_buffer_pool_size`, `innodb_file_per_table`, `innodb_log_file_size`, `innodb_log_files_in_group`, and `innodb_redo_log_capacity` -* Queries `SHOW GLOBAL STATUS` for `Innodb_buffer_pool_read_ahead`, `Innodb_buffer_pool_read_ahead_rnd`, `Innodb_buffer_pool_read_requests`, `Innodb_buffer_pool_reads`, `Innodb_buffer_pool_wait_free`, `Innodb_checkpoint_age`, `Innodb_checkpoint_max_age`, `Innodb_os_log_written` and `Uptime` +* Queries `SHOW GLOBAL VARIABLES` for `innodb_buffer_pool_instances`, `innodb_buffer_pool_size`, `innodb_file_per_table`, `innodb_log_file_size`, `innodb_log_files_in_group`, `innodb_lru_scan_depth` and `innodb_redo_log_capacity` +* Queries `SHOW GLOBAL STATUS` for `Innodb_buffer_pool_bytes_data`, `Innodb_buffer_pool_pages_free`, `Innodb_buffer_pool_pages_total`, `Innodb_buffer_pool_read_ahead`, `Innodb_buffer_pool_read_ahead_rnd`, `Innodb_buffer_pool_read_requests`, `Innodb_buffer_pool_reads`, `Innodb_buffer_pool_wait_free`, `Innodb_checkpoint_age`, `Innodb_checkpoint_max_age`, `Innodb_os_log_written` and `Uptime` * Queries `information_schema.tables` to sum all InnoDB data and index sizes * Stores the buffer pool counters in a local SQLite database to compute their rates since the previous check, one baseline per `--defaults-file` and `--defaults-group` * Reads the host's physical RAM via `sysconf(SC_PAGE_SIZE) * sysconf(SC_PHYS_PAGES)`, which is only used for the advice in the recommendations * The architecture limits follow [MySQLTuner](https://github.com/major/MySQLTuner-perl):mysql_innodb(). The buffer pool and redo log checks do not: mysqltuner warns whenever the buffer pool is smaller than the data and sizes the redo log from a write rate against a RAM-tier floor, so the miss ratio and the checkpoint age the server itself publishes are used instead +**How to read the buffer pool numbers:** + +* The buffer pool is InnoDB's cache for table and index pages (16 KiB each by default). A page a query needs is read from disk into the pool once and served from memory from then on. Changes are made to the page in the pool and written back to disk later. +* **The pool has to hold the pages the workload keeps using, not all the data.** Take a web shop with 100 GiB of data. Daily business touches the catalogue and the orders of the last few weeks, say 10 GiB. The orders of the past ten years are only read when someone looks one up. A 12 GiB pool serves that shop from memory, and a 100 GiB pool would not make it any faster. +* **"% in use" grows until the pool is full.** After a start the pool is almost empty and fills with every page that is read. As long as free pages remain, InnoDB evicts nothing, so the value shows what has been touched since the start, not what is needed. It can keep climbing for weeks as rarely used pages trickle in, and only drops when tables are dropped or truncated. A low value is no reason to shrink the pool and a rising one no reason to grow it. +* **After a restart the pool starts at about a quarter.** With `innodb_buffer_pool_dump_at_shutdown` and `innodb_buffer_pool_load_at_startup` (both `ON` by default) the server saves the list of its most recently used pages and reads them back in. `innodb_buffer_pool_dump_pct` (default 25) sets how many: 25% of the configured pool size on MariaDB, 25% of the pages in use on MySQL. +* **A full pool is the normal state of a server that has been up for a while.** InnoDB keeps a small reserve of free pages (`innodb_lru_scan_depth`: 1536 pages on MariaDB, 1024 per buffer pool instance on MySQL) and evicts the least recently used pages to refill it. The plugin calls the pool "full" once the free pages are down to that reserve. On a small pool the reserve is a visible share: a 64 MiB pool on MariaDB reads "full, 65.8% in use" and a 1 GiB pool on MySQL with 8 instances "full, 86.5% in use", while on a 50 GiB pool the reserve is 0.05% and the value ends up at 100. A pool smaller than about twice the reserve (48 MiB on MariaDB) settles anywhere below that and is not reliably recognised as full. +* **A miss ratio on a pool that is not full yet is the pool warming up.** The pages are read for the first time, not read back after an eviction, and a larger pool would not have avoided those reads. +* **"Sessions found no free page" means the reserve was used up.** A session needed a page and InnoDB had to write changed pages to disk first. It takes sessions that change pages faster than InnoDB frees them: a pool that is merely too small for its reads does not cause this on either server. What one count costs differs. MariaDB from 10.6.18, 10.11.8 and 11.4.2 counts a session that stood still for up to a second, and writes `InnoDB: Could not free any blocks in the buffer pool!` to the error log once a wait has lasted that full second. Older MariaDB releases and MySQL count every retry, of which the first ones cost no time, so their numbers are much higher for the same situation and move during a bulk load that nobody notices. +* **The pool takes its RAM as it fills.** A MariaDB started with a 2 GiB pool used 117 MiB of RAM, and 752 MiB once the pool held 594 MiB of data. A server with an oversized pool therefore runs fine for weeks and gets into memory pressure once the pool has filled up, without anyone having changed the configuration. +* **"InnoDB data + index size" is for orientation.** It is the upper end of what a larger pool can gain. It is an estimate from the table statistics and leaves out undo logs, the system tablespace and free space inside the data files. For compressed tables it is the compressed size, while the pool holds the pages uncompressed. + +**Sizing the buffer pool:** + +1. The upper limit is the RAM. Run [mysql-memory](https://linuxfabrik.github.io/monitoring-plugins/check-plugins/mysql-memory/): the pool, the other buffers and the connections together have to stay clear of the physical memory, with room for the operating system and for other processes. +2. Not full yet: wait until the pool is full before drawing conclusions. +3. Full, low miss ratio, no waits: the pool is big enough. If `mysql-memory` complains, it can shrink; lower it in steps and watch the miss ratio. +4. Full and a miss ratio that stays high during normal work, or waits: raise it as far as the RAM allows. If the RAM does not allow it, the host needs more memory or the queries need to read less. + +MariaDB 10.2.2+ and MySQL 5.7+ resize the pool while the server runs (`SET GLOBAL innodb_buffer_pool_size = ...`). MariaDB 10.11.12 to 10.11.16, 11.4.6 to 11.4.10 and 11.8.2 to 11.8.6 cannot grow it beyond its size at startup that way, unless `innodb_buffer_pool_size_max` is set in the configuration. The value also has to go into the configuration file, or the next restart brings back the old one. + ## Fact Sheet @@ -58,6 +81,7 @@ usage: mysql-innodb-buffer-pool-size [-h] [-V] [--always-ok] [-c CRIT] [--no-perfdata] [--timeout TIMEOUT] [-w WARN] [--warning-miss-ratio WARN_MISS_RATIO] + [--warning-waits WARN_WAITS] Checks the InnoDB buffer pool and redo log sizing in MySQL/MariaDB. Measures how many of the pages InnoDB requested since the last check had to be read @@ -81,13 +105,17 @@ an hour is reported. The redo log knob is `innodb_redo_log_capacity` on MySQL 8.0.30+ and `innodb_log_file_size` (times `innodb_log_files_in_group`, where that variable still exists) on MariaDB and older MySQL. Also flags `innodb_file_per_table = OFF` and architecture-related buffer-pool size -limits. Alerts if the buffer pool miss ratio exceeds its threshold, or if the -checkpoint runs closer to the end of the redo log than the thresholds allow. -The redo log size mysqltuner would recommend for the host's RAM is reported as -advice without raising a state, because it is a floor for the RAM tier rather -than a measurement of this server. On freshly booted servers (less than one -hour of uptime) the write-rate comparison is deferred, because the rate is an -average since startup and not yet meaningful. +limits. Also reports how much of the buffer pool is in use; a pool that is not +full yet is still filling up after a restart, and a low value is no reason to +shrink it. Alerts if the buffer pool miss ratio exceeds its threshold, if +sessions found no free page in the buffer pool more often than +`--warning-waits` allows (default: at all), or if the checkpoint runs closer +to the end of the redo log than the thresholds allow. The redo log size +mysqltuner would recommend for the host's RAM is reported as advice without +raising a state, because it is a floor for the RAM tier rather than a +measurement of this server. On freshly booted servers (less than one hour of +uptime) the write-rate comparison is deferred, because the rate is an average +since startup and not yet meaningful. options: -h, --help show this help message and exit @@ -126,6 +154,12 @@ options: by read-ahead do not count as misses. Only evaluated from 10 misses per second. Supports Nagios ranges. Default: 20 + --warning-waits WARN_WAITS + WARN threshold for the times per second a session + found no free page in the buffer pool. Raise it where + bulk loads are allowed to run into this. Supports + Nagios ranges. Example: `--warning-waits=5`. Default: + 0 Documentation: https://linuxfabrik.github.io/monitoring-plugins/check-plugins/mysql-innodb-buffer-pool-size/ @@ -143,7 +177,7 @@ Output on a server whose redo log is comfortably ahead of its workload: ```text Buffer pool miss ratio: 0.0% since the last check (0 of 1.5K page requests/s read from disk). -`innodb_buffer_pool_size` (128.0MiB), InnoDB data + index size (25.9MiB). +`innodb_buffer_pool_size` (128.0MiB, 24.1% in use), InnoDB data + index size (25.9MiB). The redo log (innodb_log_file_size, 32.0MiB) is 0.2% through its checkpoint age (40.2KiB of 25.2MiB). @@ -156,7 +190,7 @@ Output on a server whose buffer pool is ten times smaller than the data, serving ```text Buffer pool miss ratio: 0.1% since the last check (305 of 303.1K page requests/s read from disk). -`innodb_buffer_pool_size` (64.0MiB), InnoDB data + index size (808.6MiB). +`innodb_buffer_pool_size` (64.0MiB, full, 65.8% in use), InnoDB data + index size (808.6MiB). The redo log (innodb_log_file_size, 96.0MiB) is 0.0% through its checkpoint age (25.0B of 77.1MiB). ``` @@ -166,7 +200,7 @@ Output on the same server under random lookups across all of its data, and with ```text Buffer pool miss ratio: 32.8% since the last check (5.5K of 16.8K page requests/s read from disk) [WARNING]. -`innodb_buffer_pool_size` (64.0MiB), InnoDB data + index size (808.6MiB). +`innodb_buffer_pool_size` (64.0MiB, full, 65.8% in use), InnoDB data + index size (808.6MiB). The redo log (innodb_log_file_size, 4.0MiB) is 100.1% through its checkpoint age (2.6MiB of 2.6MiB) [CRITICAL]. @@ -180,7 +214,7 @@ Output on MySQL, which publishes no checkpoint age, so the redo log is judged by ```text Buffer pool miss ratio: 0.4% since the last check (12.3 of 3.1K page requests/s read from disk). -`innodb_buffer_pool_size` (4.0GiB), InnoDB data + index size (2.5GiB). +`innodb_buffer_pool_size` (4.0GiB, 41.7% in use), InnoDB data + index size (2.5GiB). The redo log (innodb_redo_log_capacity, 1.0GiB) holds 2h 41m of redo at the average write rate since startup (380.0MiB/h). ``` @@ -194,7 +228,8 @@ The redo log (innodb_redo_log_capacity, 1.0GiB) holds 2h 41m of redo at the aver * WARN if at or more than `--warning-miss-ratio` percent (default: 20) of the pages InnoDB requested since the last check had to be read from disk, not counting read-ahead. Only evaluated from 10 misses per second. * OK with "waiting for more data" on the first run after installation and after a server restart, since the miss ratio needs two runs to compare. * OK with "not measurable" if more pages were read from disk than requested since the last check, which happens on MariaDB 11.4.9+ while long transactions are running. -* The InnoDB data + index size never raises a state. +* WARN if sessions found no free page in the buffer pool more often per second than `--warning-waits` allows (default: 0, so on any movement of `Innodb_buffer_pool_wait_free` since the last check). +* The InnoDB data + index size and the usage of the buffer pool never raise a state. * WARN if the checkpoint has run at or past `--warning` percent (default: 87.5) of `Innodb_checkpoint_max_age`, which is where InnoDB starts flushing pages ahead to keep the checkpoint moving. * CRIT if it has run at or past `--critical` percent (default: 99). From 100 InnoDB puts a synchronous wait into every write operation, and a redo log that is too small sits pinned at 100.0 to 100.1 for as long as the load runs, which is why the threshold is 99 and not 100. * WARN on a server that publishes no checkpoint age (MySQL) if the average redo write rate since startup is at least as large as the redo log, meaning the workload writes through the whole log within an hour. @@ -207,11 +242,13 @@ The redo log (innodb_redo_log_capacity, 1.0GiB) holds 2h 41m of redo at the aver | Name | Type | Description | |----|----|----| +| mysql_innodb_buffer_pool_bytes_data | Bytes | `Innodb_buffer_pool_bytes_data`: the bytes of table and index data the buffer pool holds, with `innodb_buffer_pool_size` as its maximum. While the pool is not full, this is what has been touched since the server started. | | mysql_innodb_buffer_pool_miss_ratio | Percentage | Share of the page requests since the last check that had to be read from disk, not counting read-ahead. Absent when the interval is not measurable. | | mysql_innodb_buffer_pool_misses_per_second | Number | Pages read from disk per second because they were not in the buffer pool, not counting read-ahead. | +| mysql_innodb_buffer_pool_pct_used | Percentage | Share of the buffer pool pages that are not free: `(Innodb_buffer_pool_pages_total - Innodb_buffer_pool_pages_free) / Innodb_buffer_pool_pages_total`. Does not reach 100 on a small pool, because InnoDB keeps `innodb_lru_scan_depth` pages free. | | mysql_innodb_buffer_pool_read_requests_per_second | Number | Pages requested from the buffer pool per second. | -| mysql_innodb_buffer_pool_size | Bytes | `innodb_buffer_pool_size` in bytes. The primary value to adjust on a database server with entirely/primarily InnoDB tables, can be set up to 80% of the total memory. | -| mysql_innodb_buffer_pool_wait_free_per_second | Number | How often per second InnoDB had to wait for a free page in the buffer pool (`Innodb_buffer_pool_wait_free`). | +| mysql_innodb_buffer_pool_size | Bytes | `innodb_buffer_pool_size` in bytes. The value that decides most about the performance and the memory use of a server with InnoDB tables. | +| mysql_innodb_buffer_pool_wait_free_per_second | Number | Times per second a session found no free page in the buffer pool since the last check (`Innodb_buffer_pool_wait_free`). | | mysql_innodb_checkpoint_age | Bytes | How far the checkpoint has run into the redo log, with `Innodb_checkpoint_max_age` as its maximum. Only emitted on a server that publishes both, which is MariaDB. | | mysql_innodb_checkpoint_age_percent | Percentage | The same as a share of `Innodb_checkpoint_max_age`. This is the series that says whether the redo log is big enough for what the server does; the configured sizes cannot say that on their own. | | mysql_innodb_data_size | Bytes | Sum of `DATA_LENGTH + INDEX_LENGTH` across all InnoDB tables in non-system schemas. For reference only. | @@ -221,6 +258,21 @@ The redo log (innodb_redo_log_capacity, 1.0GiB) holds 2h 41m of redo at the aver | mysql_innodb_redo_log_capacity_recommended | Bytes | The redo log size mysqltuner would recommend, derived from the hourly write rate and rounded into the host's RAM tier. Reported for reference only and never used for alerting. Only emitted with at least 1 hour of uptime. | +## Troubleshooting + +### Sessions found no free page in the buffer pool + +`Sessions found no free page in the buffer pool 1.35 times/s since the last check [WARNING].` + +1. Check the error log for `InnoDB: Could not free any blocks in the buffer pool!` (MariaDB from 10.6.18, 10.11.8 and 11.4.2) or `Difficult to find free blocks in the buffer pool` (MySQL, older MariaDB). Where present, they carry the time of the stall, but the server does not log every wait. +2. Find out what was writing at that time: a bulk import, a large `UPDATE` or `DELETE`, an `ALTER TABLE`. Waits during such a job are the job's price and often acceptable; loading 75 MiB of rows into a 64 MiB pool is enough to cause them on MySQL. Raise `--warning-waits` above what the job causes, or accept the warning while it runs. +3. If it happens under the normal load and the RAM allows it according to `mysql-memory`, raise `innodb_buffer_pool_size`. With 24 sessions updating rows on MariaDB, a 64 MiB pool came to 107 to 217 waits in 40 seconds, a 256 MiB pool to none. + +### The pool is far from full + +Nothing to fix. The pool fills over days to weeks after a restart, see "How to read the buffer pool numbers" above. If the host is short on memory in the meantime, the pool can be lowered to a size `mysql-memory` is happy with; it will fill up and stay full, which is how it is meant to work. + + ## Credits, License * Authors: [Linuxfabrik GmbH, Zurich](https://www.linuxfabrik.ch) diff --git a/check-plugins/mysql-innodb-buffer-pool-size/grafana/mysql-innodb-buffer-pool-size.yml b/check-plugins/mysql-innodb-buffer-pool-size/grafana/mysql-innodb-buffer-pool-size.yml index b62a6090a..343577eec 100644 --- a/check-plugins/mysql-innodb-buffer-pool-size/grafana/mysql-innodb-buffer-pool-size.yml +++ b/check-plugins/mysql-innodb-buffer-pool-size/grafana/mysql-innodb-buffer-pool-size.yml @@ -69,6 +69,12 @@ spec: min: 0 unit: bytes overrides: + - matcher: + id: byName + options: mysql_innodb_buffer_pool_bytes_data + properties: + - id: displayName + value: Data in the buffer pool - matcher: id: byName options: mysql_innodb_buffer_pool_size @@ -140,6 +146,36 @@ spec: operator: '=' value: mysql_innodb_buffer_pool_size + - alias: mysql_innodb_buffer_pool_bytes_data + refId: mysql_innodb_buffer_pool_bytes_data + groupBy: + - params: + - $interval + type: time + - params: + - 'null' + type: fill + measurement: $command + resultFormat: time_series + select: + - - params: + - value + type: field + - params: [] + type: mean + tags: + - key: hostname + operator: '=' + value: $hostname + - condition: AND + key: service + operator: '=' + value: $service + - condition: AND + key: metric + operator: '=' + value: mysql_innodb_buffer_pool_bytes_data + - alias: mysql_innodb_data_size refId: mysql_innodb_data_size groupBy: @@ -564,3 +600,79 @@ spec: key: metric operator: '=' value: mysql_innodb_buffer_pool_wait_free_per_second + + - title: MySQL InnoDB Buffer Pool - Usage + type: timeseries + gridPos: + h: 8 + w: 12 + x: 0 + y: 16 + fieldConfig: + defaults: + color: + mode: palette-classic + custom: + drawStyle: line + lineInterpolation: smooth + lineWidth: 1 + pointSize: 3 + showPoints: always + spanNulls: 900000 + decimals: 1 + max: 100 + min: 0 + unit: percent + overrides: + - matcher: + id: byName + options: mysql_innodb_buffer_pool_pct_used + properties: + - id: displayName + value: Buffer pool pages in use + options: + legend: + calcs: + - firstNotNull + - min + - mean + - max + - lastNotNull + displayMode: table + placement: bottom + showLegend: true + tooltip: + mode: multi + sort: none + + targets: + + - alias: mysql_innodb_buffer_pool_pct_used + refId: mysql_innodb_buffer_pool_pct_used + groupBy: + - params: + - $interval + type: time + - params: + - 'null' + type: fill + measurement: $command + resultFormat: time_series + select: + - - params: + - value + type: field + - params: [] + type: mean + tags: + - key: hostname + operator: '=' + value: $hostname + - condition: AND + key: service + operator: '=' + value: $service + - condition: AND + key: metric + operator: '=' + value: mysql_innodb_buffer_pool_pct_used diff --git a/check-plugins/mysql-innodb-buffer-pool-size/icingaweb2-module-director/mysql-innodb-buffer-pool-size.json b/check-plugins/mysql-innodb-buffer-pool-size/icingaweb2-module-director/mysql-innodb-buffer-pool-size.json index 4fb3904fd..cc53caf82 100644 --- a/check-plugins/mysql-innodb-buffer-pool-size/icingaweb2-module-director/mysql-innodb-buffer-pool-size.json +++ b/check-plugins/mysql-innodb-buffer-pool-size/icingaweb2-module-director/mysql-innodb-buffer-pool-size.json @@ -25,6 +25,9 @@ }, "--warning-miss-ratio": { "value": "$mysql_innodb_buffer_pool_size_warning_miss_ratio$" + }, + "--warning-waits": { + "value": "$mysql_innodb_buffer_pool_size_warning_waits$" } }, "command": "/usr/lib64/nagios/plugins/mysql-innodb-buffer-pool-size", @@ -69,6 +72,11 @@ "datafield_id": 8, "is_required": "n", "var_filter": null + }, + { + "datafield_id": 9, + "is_required": "n", + "var_filter": null } ], "imports": [], @@ -112,7 +120,7 @@ "tpl-service-generic" ], "max_check_attempts": 5, - "notes": "Checks the InnoDB buffer pool and redo log sizing in MySQL/MariaDB. Measures how many of the pages InnoDB requested since the last check had to be read from disk because they were not in the buffer pool, and reports how far the checkpoint has run through the redo log, which is what tells a redo log that is too small for its workload from one that is merely small. The buffer pool does not have to hold the whole database: InnoDB keeps the pages that are read again and lets pages from a one-off scan age out first, so a pool far smaller than the data is fine as long as the working set fits. The InnoDB data and index size is therefore reported for reference only and never raises a state. Pages InnoDB prefetches by read-ahead are not counted as misses, and fewer than 10 misses per second are not worth an alert on any storage. On MariaDB 11.4.9 and newer the page requests of a transaction are only counted once it ends, so while long transactions run, the miss ratio of a single check can read too high, or cannot be computed at all when more pages were read than requested. On a server that publishes `Innodb_checkpoint_age` and `Innodb_checkpoint_max_age` those decide the state; on one that publishes neither, the average redo write rate since startup is compared against the redo log size instead, and a workload that writes through the whole log within an hour is reported. The redo log knob is `innodb_redo_log_capacity` on MySQL 8.0.30+ and `innodb_log_file_size` (times `innodb_log_files_in_group`, where that variable still exists) on MariaDB and older MySQL. Also flags `innodb_file_per_table = OFF` and architecture-related buffer-pool size limits. Alerts if the buffer pool miss ratio exceeds its threshold, or if the checkpoint runs closer to the end of the redo log than the thresholds allow. The redo log size mysqltuner would recommend for the host's RAM is reported as advice without raising a state, because it is a floor for the RAM tier rather than a measurement of this server. On freshly booted servers (less than one hour of uptime) the write-rate comparison is deferred, because the rate is an average since startup and not yet meaningful.", + "notes": "Checks the InnoDB buffer pool and redo log sizing in MySQL/MariaDB. Measures how many of the pages InnoDB requested since the last check had to be read from disk because they were not in the buffer pool, and reports how far the checkpoint has run through the redo log, which is what tells a redo log that is too small for its workload from one that is merely small. The buffer pool does not have to hold the whole database: InnoDB keeps the pages that are read again and lets pages from a one-off scan age out first, so a pool far smaller than the data is fine as long as the working set fits. The InnoDB data and index size is therefore reported for reference only and never raises a state. Pages InnoDB prefetches by read-ahead are not counted as misses, and fewer than 10 misses per second are not worth an alert on any storage. On MariaDB 11.4.9 and newer the page requests of a transaction are only counted once it ends, so while long transactions run, the miss ratio of a single check can read too high, or cannot be computed at all when more pages were read than requested. On a server that publishes `Innodb_checkpoint_age` and `Innodb_checkpoint_max_age` those decide the state; on one that publishes neither, the average redo write rate since startup is compared against the redo log size instead, and a workload that writes through the whole log within an hour is reported. The redo log knob is `innodb_redo_log_capacity` on MySQL 8.0.30+ and `innodb_log_file_size` (times `innodb_log_files_in_group`, where that variable still exists) on MariaDB and older MySQL. Also flags `innodb_file_per_table = OFF` and architecture-related buffer-pool size limits. Also reports how much of the buffer pool is in use; a pool that is not full yet is still filling up after a restart, and a low value is no reason to shrink it. Alerts if the buffer pool miss ratio exceeds its threshold, if sessions found no free page in the buffer pool more often than `--warning-waits` allows (default: at all), or if the checkpoint runs closer to the end of the redo log than the thresholds allow. The redo log size mysqltuner would recommend for the host's RAM is reported as advice without raising a state, because it is a floor for the RAM tier rather than a measurement of this server. On freshly booted servers (less than one hour of uptime) the write-rate comparison is deferred, because the rate is an average since startup and not yet meaningful.", "notes_url": "https://linuxfabrik.github.io/monitoring-plugins/check-plugins/mysql-innodb-buffer-pool-size/", "object_name": "tpl-service-mysql-innodb-buffer-pool-size", "object_type": "template", @@ -130,7 +138,8 @@ "mysql_innodb_buffer_pool_size_no_perfdata": false, "mysql_innodb_buffer_pool_size_timeout": 3, "mysql_innodb_buffer_pool_size_warning": "87.5", - "mysql_innodb_buffer_pool_size_warning_miss_ratio": "20" + "mysql_innodb_buffer_pool_size_warning_miss_ratio": "20", + "mysql_innodb_buffer_pool_size_warning_waits": "0" }, "volatile": null, "zone": null, @@ -221,6 +230,17 @@ "visibility": "visible" }, "uuid": "d7a4836d-7c43-4d57-b932-359de134005b" + }, + "9": { + "varname": "mysql_innodb_buffer_pool_size_warning_waits", + "caption": "MySQL Innodb Buffer Pool Size: Warning Waits", + "description": "WARN threshold for the times per second a session found no free page in the buffer pool. Raise it where bulk loads are allowed to run into this. Supports Nagios ranges. Example: `--warning-waits=5`.", + "datatype": "Icinga\\Module\\Director\\DataType\\DataTypeString", + "format": null, + "settings": { + "visibility": "visible" + }, + "uuid": "68247b09-17ae-414b-b1a8-8e2117c33611" } } } diff --git a/check-plugins/mysql-innodb-buffer-pool-size/mysql-innodb-buffer-pool-size b/check-plugins/mysql-innodb-buffer-pool-size/mysql-innodb-buffer-pool-size index db692ab84..fcff0066d 100755 --- a/check-plugins/mysql-innodb-buffer-pool-size/mysql-innodb-buffer-pool-size +++ b/check-plugins/mysql-innodb-buffer-pool-size/mysql-innodb-buffer-pool-size @@ -22,7 +22,7 @@ import lib.human from lib.globals import STATE_OK, STATE_UNKNOWN, STATE_WARN __author__ = 'Linuxfabrik GmbH, Zurich/Switzerland' -__version__ = '2026111301' +__version__ = '2026111302' DESCRIPTION = """Checks the InnoDB buffer pool and redo log sizing in MySQL/MariaDB. Measures how many of the pages InnoDB requested since the last check had to be read from disk because @@ -42,7 +42,10 @@ size instead, and a workload that writes through the whole log within an hour is redo log knob is `innodb_redo_log_capacity` on MySQL 8.0.30+ and `innodb_log_file_size` (times `innodb_log_files_in_group`, where that variable still exists) on MariaDB and older MySQL. Also flags `innodb_file_per_table = OFF` and architecture-related buffer-pool size limits. -Alerts if the buffer pool miss ratio exceeds its threshold, or if the checkpoint runs closer +Also reports how much of the buffer pool is in use; a pool that is not full yet is still +filling up after a restart, and a low value is no reason to shrink it. Alerts if the buffer +pool miss ratio exceeds its threshold, if sessions found no free page in the buffer pool +more often than `--warning-waits` allows (default: at all), or if the checkpoint runs closer to the end of the redo log than the thresholds allow. The redo log size mysqltuner would recommend for the host's RAM is reported as advice without raising a state, because it is a floor for the RAM tier rather than a measurement of this server. On freshly booted servers @@ -96,6 +99,8 @@ DEFAULT_WARN = '87.5' # more RAM does not help a scan until the whole table fits. Random lookups across a # working set ten times the pool measured 33%. DEFAULT_WARN_MISS_RATIO = '20' +# Any wait at all, see the comment at the buffer pool waits for what a wait is. +DEFAULT_WARN_WAITS = '0' def parse_args(): @@ -191,6 +196,18 @@ def parse_args(): default=DEFAULT_WARN_MISS_RATIO, ) + parser.add_argument( + '--warning-waits', + help='WARN threshold for the times per second a session found no free page ' + 'in the buffer pool. ' + 'Raise it where bulk loads are allowed to run into this. ' + 'Supports Nagios ranges. ' + 'Example: `--warning-waits=5`. ' + 'Default: %(default)s', + dest='WARN_WAITS', + default=DEFAULT_WARN_WAITS, + ) + args, _ = parser.parse_known_args() return args @@ -201,10 +218,12 @@ def get_vars(conn): # the current connection to MariaDB. sql = """ show global variables - where variable_name like 'innodb_buffer_pool_size' + where variable_name like 'innodb_buffer_pool_instances' + or variable_name like 'innodb_buffer_pool_size' or variable_name like 'innodb_file_per_table' or variable_name like 'innodb_log_file_size' or variable_name like 'innodb_log_files_in_group' + or variable_name like 'innodb_lru_scan_depth' or variable_name like 'innodb_redo_log_capacity' ; """ @@ -214,7 +233,10 @@ def get_vars(conn): def get_status(conn): sql = """ show global status - where variable_name like 'Innodb_buffer_pool_read_ahead' + where variable_name like 'Innodb_buffer_pool_bytes_data' + or variable_name like 'Innodb_buffer_pool_pages_free' + or variable_name like 'Innodb_buffer_pool_pages_total' + or variable_name like 'Innodb_buffer_pool_read_ahead' or variable_name like 'Innodb_buffer_pool_read_ahead_rnd' or variable_name like 'Innodb_buffer_pool_read_requests' or variable_name like 'Innodb_buffer_pool_reads' @@ -346,6 +368,40 @@ def main(): redo_size = None redo_knob = None file_per_table = myvar.get('innodb_file_per_table', '').upper() + pages_free = int(mystat.get('Innodb_buffer_pool_pages_free') or 0) + pages_total = int(mystat.get('Innodb_buffer_pool_pages_total') or 0) + bytes_data = int(mystat.get('Innodb_buffer_pool_bytes_data') or 0) + # InnoDB does not let the free list run empty: the page cleaner evicts pages + # from the end of the LRU list until about `innodb_lru_scan_depth` pages are + # free again, per buffer pool instance on MySQL (MariaDB has a single + # instance since 10.5 and no `innodb_buffer_pool_instances` since 10.6). A + # pool whose free list is down to that reserve is full, the reserve never + # fills up. + # Verified with a 64 MiB pool (4056 pages) and 75 to 150 MiB of data: on + # MariaDB 10.6.28, 10.11, 11.4 and 11.8.9 `Innodb_buffer_pool_pages_free` + # moved between 792 and 1549 for a scan depth of 1536, never towards 0. On + # MySQL 8.0, 8.4.13 and 9.3 it moved between 0 and 1110 for a scan depth of + # 1024. Both overshoot the scan depth by a few pages when the load stops, + # hence the 25% on top. The reserve is per instance: MySQL 8.0.46 and 8.4.13 + # with a 1 GiB pool (65536 pages) in 8 instances and 2.3 GiB of data moved + # between 0 free pages under read load and 8192 to 9586 when idle, which is + # 8 times the scan depth and a little more. + free_reserve = ( + int(myvar.get('innodb_lru_scan_depth') or 0) + * (int(myvar.get('innodb_buffer_pool_instances') or 1) or 1) + * 1.25 + ) + # A pool smaller than twice its reserve never gets below it, so the reserve + # alone would call a freshly started 16 MiB pool full at 1% usage. Seen + # exactly like that on MariaDB 10.6.28. The price is that such a pool is not + # reliably recognised as full: a 32 MiB pool (2028 pages) with 120 MiB of + # data settled between 24% and 55% in use on MariaDB 10.6 to 11.8. + pool_full = pages_total > 0 and pages_free <= min(free_reserve, pages_total / 2) + pct_used = ( + round((pages_total - pages_free) / pages_total * 100, 1) + if pages_total + else None + ) uptime = int(mystat.get('Uptime') or 0) os_log_written = int(mystat.get('Innodb_os_log_written') or 0) # MariaDB publishes both, MySQL neither (`ha_innodb.cc`). Absent means this @@ -502,8 +558,60 @@ def main(): ) # The miss ratio first, so it lands in the first line of the output. sections.append(miss_msg) + + # Waits for a free page. `Innodb_buffer_pool_wait_free` counts the times a + # session found no free page (`buf0lru.cc`, `buf_LRU_get_free_block()`). What + # a count costs the session differs: + # + # - MariaDB from 10.6.18, 10.11.8 and 11.4.2 counts once the free list is + # empty and nothing at the end of the LRU list can be evicted, and then + # waits up to a second for the page cleaner. Every count is a session that + # stood still. + # - MariaDB before that (10.6.17 and 10.11.7 read from the source) and MySQL + # count every pass that found no free block. The first passes cost nothing, + # MySQL sleeps 10 ms from the third pass on. + # + # On all of them it takes sessions that change pages faster than InnoDB + # frees them; four sessions scanning a table larger than the pool did not + # move the counter on either server. With 24 sessions updating rows through + # a 64 MiB pool it moved by 107 to 217 in 40 s on MariaDB 10.6.28, which also + # logs "Could not free any blocks in the buffer pool!", and by 256/s on MySQL + # 8.4.13. The same load through 256 MiB caused no waits at all, measured + # twice. Loading 75 MiB of rows into the 64 MiB pool is enough to move it on + # MySQL. + # + # The default warns on any movement, as `mysql-innodb-log-waits` does for the + # redo log buffer. No other default was measured, and a rate that suits the + # servers counting every pass would hide real stalls on the ones that wait a + # second per count: 60 of those within five minutes are 0.2 per second. + if pool_rates is not None and pool_rates['wait_free']: + item_state = lib.base.get_state( + pool_rates['wait_free'], args.WARN_WAITS, None, _operator='range' + ) + state = lib.base.get_worst(state, item_state) + sections.append( + f'Sessions found no free page in the buffer pool' + f' {round(pool_rates["wait_free"], 2)} times/s since the last check' + f'{lib.base.state2str(item_state, prefix=" ")}.' + ) + if item_state != STATE_OK: + recommendations.append( + f'Raise `innodb_buffer_pool_size` above {buffer_h} if the RAM' + f' allows it: sessions found no free page in the buffer pool and' + f' were held up until InnoDB had written changed pages to disk. If' + f' a bulk load is the cause and may run into this, raise' + f' `--warning-waits`' + ) + + # How full the pool is, for reference: a pool that is not full yet is still + # filling up after a restart, and what it holds is what was touched since, + # not what is needed. + usage = '' + if pct_used is not None: + usage = f', full, {pct_used}% in use' if pool_full else f', {pct_used}% in use' sections.append( - f'`innodb_buffer_pool_size` ({buffer_h}), InnoDB data + index size ({data_h}).' + f'`innodb_buffer_pool_size` ({buffer_h}{usage}), InnoDB data + index size' + f' ({data_h}).' ) # 4. Redo log pressure. What "the redo log is too small" means is that the @@ -631,6 +739,21 @@ def main(): uom='B', _min=0, ) + if pct_used is not None: + perfdata += lib.base.get_perfdata( + 'mysql_innodb_buffer_pool_bytes_data', + bytes_data, + uom='B', + _min=0, + _max=buffer_size, + ) + perfdata += lib.base.get_perfdata( + 'mysql_innodb_buffer_pool_pct_used', + pct_used, + uom='%', + _min=0, + _max=100, + ) if miss_ratio is not None: perfdata += lib.base.get_perfdata( 'mysql_innodb_buffer_pool_miss_ratio', @@ -654,6 +777,7 @@ def main(): perfdata += lib.base.get_perfdata( 'mysql_innodb_buffer_pool_wait_free_per_second', round(pool_rates['wait_free'], 2), + warn=args.WARN_WAITS, _min=0, ) if log_file_size is not None: diff --git a/check-plugins/mysql-innodb-buffer-pool-size/unit-test/run b/check-plugins/mysql-innodb-buffer-pool-size/unit-test/run index e193dc910..d7331308b 100755 --- a/check-plugins/mysql-innodb-buffer-pool-size/unit-test/run +++ b/check-plugins/mysql-innodb-buffer-pool-size/unit-test/run @@ -25,11 +25,17 @@ to miss, so the plugin returns STATE_OK. The first run only records the buffer pool counters as a baseline, the second one reports the miss ratio since the first. +The pool of such a server is mostly free, so it is reported with its +usage and not as full. + On MariaDB the same container then gets a table about four times the size of the buffer pool, and the plugin has to tell the two workloads apart that a size comparison cannot: a hot set that fits into the pool (OK) and random lookups across the whole table (WARN). The table is -filled from the `seq` engine, which MySQL does not ship. +filled from the `seq` engine, which MySQL does not ship. With the table +loaded the pool has to count as full. Waits for a free page need +sessions that change pages faster than InnoDB frees them, which this +test does not produce; it asserts that reads alone cause none. The test matrix is defined by the Containerfiles under `containerfiles/`. Each file is a Containerfile (typically a @@ -119,6 +125,13 @@ def _check_workloads(test, defaults_file, cmd): retc, combined = _run_plugin(cmd) test.assertEqual(retc, STATE_OK) test.assertRegex(combined, r'Buffer pool miss ratio: \d+\.\d% since') + # four times its size went through the pool, so it is down to the + # reserve of free pages InnoDB keeps + test.assertRegex( + combined, + r'`innodb_buffer_pool_size`\s*\(32\.0+\s*MiB, full, \d+\.\d% in use\)', + ) + test.assertNotIn('Sessions found no free page', combined) _lookups(cursor, WORKLOAD_ROWS) retc, combined = _run_plugin(cmd) @@ -142,7 +155,12 @@ def _check_image(test, containerfile): # MySQL 9.3.0, so pinning it would break that container's boot, # and the plugin no longer evaluates the log-size-to-buffer-pool # ratio anyway. - extra_args='--innodb-buffer-pool-size=33554432', + # The reserve of free pages InnoDB keeps is `innodb_lru_scan_depth`, + # by default 1536 of the 2028 pages a pool of this size has on + # MariaDB. With that the pool settles anywhere between 24% and 55% in + # use, and whether it is full cannot be told. A reserve of 256 pages + # lets it fill up as a pool of a realistic size does. + extra_args='--innodb-buffer-pool-size=33554432 --innodb-lru-scan-depth=256', ) as (_container, defaults_file): cmd = [ 'python3', @@ -152,7 +170,12 @@ def _check_image(test, containerfile): for _run in ('baseline', 'interval'): retc, combined = _run_plugin(cmd) test.assertEqual(retc, STATE_OK) - test.assertRegex(combined, r'`innodb_buffer_pool_size`\s*\(32\.0+\s*MiB\)') + # an empty server leaves most of the pool free, so it is not "full" + test.assertRegex( + combined, + r'`innodb_buffer_pool_size`\s*\(32\.0+\s*MiB, \d+\.\d% in use\)', + ) + test.assertIn('mysql_innodb_buffer_pool_pct_used', combined) # Every container gets its own temporary defaults file, and the plugin # keeps one baseline per defaults file, so the second run always has one. test.assertRegex(